! Started logfile: J1911-2006_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:36:17 2016 obs J1911-2006_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1911-2006_S_2014_08_05_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.766667 visibilities/baseline/integration-bin. ! Found source: J1911-2006 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 2208 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1911-2006_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.483683Jy sigma=0.004376 ! Fit after self-cal, rms=0.438823Jy sigma=0.003996 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=13.46 mas, bpa=20.89 degrees ! Estimated noise=1906.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.871297 Jy ! Component: 100 - total flux cleaned = 1.15642 Jy ! Total flux subtracted in 100 components = 1.15642 Jy ! Clean residual min=-0.064696 max=0.129040 Jy/beam ! Clean residual mean=-0.000676 rms=0.023662 Jy/beam ! Combined flux in latest and established models = 1.15642 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 1.15642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331648Jy sigma=0.002919 ! Fit after self-cal, rms=0.331195Jy sigma=0.002916 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.823 mas, bmaj=15.07 mas, bpa=20.72 degrees ! Estimated noise=1642.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.192689 Jy ! Component: 100 - total flux cleaned = 0.291667 Jy ! Component: 150 - total flux cleaned = 0.347017 Jy ! Component: 200 - total flux cleaned = 0.381487 Jy ! Total flux subtracted in 200 components = 0.381487 Jy ! Clean residual min=-0.033370 max=0.033809 Jy/beam ! Clean residual mean=-0.000105 rms=0.008827 Jy/beam ! Combined flux in latest and established models = 1.53791 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 87 components and 1.53791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192196Jy sigma=0.001608 ! Fit after self-cal, rms=0.190715Jy sigma=0.001597 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.81 HN 1.04 KP 1.06 ! LA 1.12 MK 1.00* NL 0.98 OV 0.99 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.08 KP 1.01 ! LA 1.07 MK 1.00* NL 1.04 OV 1.01 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.11 HN 1.09 KP 0.90 ! LA 0.85 MK 1.00* NL 1.02 OV 0.94 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.96 HN 1.05 KP 0.86 ! LA 0.81 MK 1.00* NL 1.11 OV 0.99 ! PT 1.03 SC 0.96 ! ! ! Fit before self-cal, rms=0.190715Jy sigma=0.001597 ! Fit after self-cal, rms=0.100110Jy sigma=0.000864 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.863 mas, bmaj=15.3 mas, bpa=20.75 degrees ! Estimated noise=1638.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, 55.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169277 Jy ! Component: 100 - total flux cleaned = 0.0196595 Jy ! Component: 150 - total flux cleaned = 0.0207757 Jy ! Component: 200 - total flux cleaned = 0.022194 Jy ! Total flux subtracted in 200 components = 0.022194 Jy ! Clean residual min=-0.012616 max=0.015005 Jy/beam ! Clean residual mean=-0.000074 rms=0.003298 Jy/beam ! Combined flux in latest and established models = 1.5601 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 122 components and 1.5601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094621Jy sigma=0.000810 ! Fit after self-cal, rms=0.094484Jy sigma=0.000808 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094484Jy sigma=0.000808 ! Fit after self-cal, rms=0.093941Jy sigma=0.000805 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.868 mas, bmaj=15.33 mas, bpa=20.77 degrees ! Estimated noise=1636.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00598479 Jy ! Component: 100 - total flux cleaned = -0.00703897 Jy ! Component: 150 - total flux cleaned = -0.0068249 Jy ! Component: 200 - total flux cleaned = -0.00682878 Jy ! Total flux subtracted in 200 components = -0.00682878 Jy ! Clean residual min=-0.010560 max=0.012538 Jy/beam ! Clean residual mean=-0.000058 rms=0.002791 Jy/beam ! Combined flux in latest and established models = 1.55327 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 151 components and 1.55327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092571Jy sigma=0.000794 ! Fit after self-cal, rms=0.092563Jy sigma=0.000793 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00615183 Jy ! Component: 100 - total flux cleaned = 0.0047628 Jy ! Component: 150 - total flux cleaned = 0.00356157 Jy ! Component: 200 - total flux cleaned = 0.00313159 Jy ! Total flux subtracted in 200 components = 0.00313159 Jy ! Clean residual min=-0.008610 max=0.008268 Jy/beam ! Clean residual mean=-0.000036 rms=0.002264 Jy/beam ! Combined flux in latest and established models = 1.5564 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 189 components and 1.5564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090409Jy sigma=0.000779 ! Fit after self-cal, rms=0.090298Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090298Jy sigma=0.000777 ! Fit after self-cal, rms=0.090063Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.87 mas, bmaj=15.36 mas, bpa=20.8 degrees ! Estimated noise=1635.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111239 Jy ! Component: 100 - total flux cleaned = -0.00171062 Jy ! Component: 150 - total flux cleaned = -0.00205697 Jy ! Component: 200 - total flux cleaned = -0.00221736 Jy ! Total flux subtracted in 200 components = -0.00221736 Jy ! Clean residual min=-0.007295 max=0.005823 Jy/beam ! Clean residual mean=-0.000010 rms=0.001814 Jy/beam ! Combined flux in latest and established models = 1.55419 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 226 components and 1.55419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089175Jy sigma=0.000769 ! Fit after self-cal, rms=0.089153Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000873093 Jy ! Component: 100 - total flux cleaned = 0.000870043 Jy ! Component: 150 - total flux cleaned = 0.000736101 Jy ! Component: 200 - total flux cleaned = 0.000496435 Jy ! Total flux subtracted in 200 components = 0.000496435 Jy ! Clean residual min=-0.006756 max=0.005431 Jy/beam ! Clean residual mean=-0.000009 rms=0.001675 Jy/beam ! Combined flux in latest and established models = 1.55468 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 248 components and 1.55468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088722Jy sigma=0.000766 ! Fit after self-cal, rms=0.088710Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088710Jy sigma=0.000766 ! Fit after self-cal, rms=0.088699Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.999 mas, bmaj=19.84 mas, bpa=10.9 degrees ! Estimated noise=1828.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00136036 Jy ! Component: 100 - total flux cleaned = -0.00209109 Jy ! Component: 150 - total flux cleaned = -0.00249884 Jy ! Component: 200 - total flux cleaned = -0.00250419 Jy ! Total flux subtracted in 200 components = -0.00250419 Jy ! Clean residual min=-0.006325 max=0.005423 Jy/beam ! Clean residual mean=0.000003 rms=0.001616 Jy/beam ! Combined flux in latest and established models = 1.55218 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 271 components and 1.55218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088468Jy sigma=0.000764 ! Fit after self-cal, rms=0.088447Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.87461e-05 Jy ! Component: 100 - total flux cleaned = 0.00033587 Jy ! Component: 150 - total flux cleaned = 0.000480069 Jy ! Component: 200 - total flux cleaned = 0.000613798 Jy ! Total flux subtracted in 200 components = 0.000613798 Jy ! Clean residual min=-0.006087 max=0.005159 Jy/beam ! Clean residual mean=0.000002 rms=0.001530 Jy/beam ! Combined flux in latest and established models = 1.55279 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 280 components and 1.55279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088312Jy sigma=0.000763 ! Fit after self-cal, rms=0.088302Jy sigma=0.000763 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.873 mas, bmaj=15.38 mas, bpa=20.81 degrees ! Estimated noise=1635.69 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.873 x 15.38 at 20.81 degrees (North through East) ! Clean map min=-0.012203 max=1.1653 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088302Jy sigma=0.000763 ! Fit after self-cal, rms=0.082938Jy sigma=0.000707 ! Inverting map and beam ! Estimated beam: bmin=3.874 mas, bmaj=15.39 mas, bpa=20.81 degrees ! Estimated noise=1635.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00174843 Jy ! Component: 100 - total flux cleaned = -0.00186259 Jy ! Component: 150 - total flux cleaned = -0.00176634 Jy ! Component: 200 - total flux cleaned = -0.00200936 Jy ! Total flux subtracted in 200 components = -0.00200936 Jy ! Clean residual min=-0.005548 max=0.004764 Jy/beam ! Clean residual mean=0.000003 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 1.55078 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 316 components and 1.55078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082686Jy sigma=0.000705 ! Fit after self-cal, rms=0.082685Jy sigma=0.000705 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000366445 Jy ! Component: 100 - total flux cleaned = 0.000225533 Jy ! Component: 150 - total flux cleaned = 9.00426e-05 Jy ! Component: 200 - total flux cleaned = -3.61236e-05 Jy ! Total flux subtracted in 200 components = -3.61236e-05 Jy ! Clean residual min=-0.005528 max=0.004749 Jy/beam ! Clean residual mean=0.000003 rms=0.001317 Jy/beam ! Combined flux in latest and established models = 1.55075 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 337 components and 1.55075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082563Jy sigma=0.000704 ! Fit after self-cal, rms=0.082565Jy sigma=0.000704 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082565Jy sigma=0.000704 ! Fit after self-cal, rms=0.082607Jy sigma=0.000704 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=13.69 mas, bpa=20.97 degrees ! Estimated noise=1913.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.873106 Jy ! Component: 100 - total flux cleaned = 1.14981 Jy ! Component: 150 - total flux cleaned = 1.28791 Jy ! Component: 200 - total flux cleaned = 1.36673 Jy ! Total flux subtracted in 200 components = 1.36673 Jy ! Clean residual min=-0.020294 max=0.040658 Jy/beam ! Clean residual mean=-0.000301 rms=0.008140 Jy/beam ! Combined flux in latest and established models = 1.36673 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 1.36673 Jy ! Inverting map and beam ! Estimated beam: bmin=3.876 mas, bmaj=15.4 mas, bpa=20.81 degrees ! Estimated noise=1635.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.063414 Jy ! Component: 100 - total flux cleaned = 0.0984032 Jy ! Component: 150 - total flux cleaned = 0.120425 Jy ! Component: 200 - total flux cleaned = 0.136296 Jy ! Total flux subtracted in 200 components = 0.136296 Jy ! Clean residual min=-0.010303 max=0.013097 Jy/beam ! Clean residual mean=-0.000088 rms=0.003284 Jy/beam ! Combined flux in latest and established models = 1.50303 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 111 components and 1.50303 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.008 mas, bmaj=19.86 mas, bpa=10.91 degrees ! Estimated noise=1826.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151803 Jy ! Component: 100 - total flux cleaned = 0.0201854 Jy ! Component: 150 - total flux cleaned = 0.0251523 Jy ! Component: 200 - total flux cleaned = 0.02917 Jy ! Total flux subtracted in 200 components = 0.02917 Jy ! Clean residual min=-0.007479 max=0.007374 Jy/beam ! Clean residual mean=-0.000035 rms=0.002485 Jy/beam ! Combined flux in latest and established models = 1.5322 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221061 Jy ! Component: 100 - total flux cleaned = 0.00393094 Jy ! Component: 150 - total flux cleaned = 0.00510116 Jy ! Component: 200 - total flux cleaned = 0.00652046 Jy ! Total flux subtracted in 200 components = 0.00652046 Jy ! Clean residual min=-0.006138 max=0.005734 Jy/beam ! Clean residual mean=-0.000018 rms=0.001973 Jy/beam ! Combined flux in latest and established models = 1.53872 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 169 components and 1.53872 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.876 mas, bmaj=15.4 mas, bpa=20.81 degrees ! Estimated noise=1635.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134624 Jy ! Component: 100 - total flux cleaned = 0.00134749 Jy ! Component: 150 - total flux cleaned = 0.00170309 Jy ! Component: 200 - total flux cleaned = 0.00186798 Jy ! Total flux subtracted in 200 components = 0.00186798 Jy ! Clean residual min=-0.007955 max=0.006229 Jy/beam ! Clean residual mean=-0.000003 rms=0.001660 Jy/beam ! Combined flux in latest and established models = 1.54058 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 193 components and 1.54058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083667Jy sigma=0.000711 ! Fit after self-cal, rms=0.083571Jy sigma=0.000710 wmodel J1911-2006_S_2014_08_05_pus_map.mod ! Writing 193 model components to file: J1911-2006_S_2014_08_05_pus_map.mod wobs J1911-2006_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1911-2006_S_2014_08_05_pus_uvs.fits wwins J1911-2006_S_2014_08_05_pus_map.win ! wwins: Wrote 3 windows to J1911-2006_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00190367 Jy ! Component: 100 - total flux cleaned = -0.00317809 Jy ! Component: 150 - total flux cleaned = -0.00405402 Jy ! Component: 200 - total flux cleaned = -0.00487619 Jy ! Component: 250 - total flux cleaned = -0.00547905 Jy ! Component: 300 - total flux cleaned = -0.00605054 Jy ! Component: 350 - total flux cleaned = -0.00659141 Jy ! Component: 400 - total flux cleaned = -0.00688712 Jy ! Component: 450 - total flux cleaned = -0.00723896 Jy ! Component: 500 - total flux cleaned = -0.00730635 Jy ! Component: 550 - total flux cleaned = -0.00737376 Jy ! Component: 600 - total flux cleaned = -0.00756512 Jy ! Component: 650 - total flux cleaned = -0.00768678 Jy ! Component: 700 - total flux cleaned = -0.00774434 Jy ! Component: 750 - total flux cleaned = -0.00797259 Jy ! Component: 800 - total flux cleaned = -0.0080827 Jy ! Component: 850 - total flux cleaned = -0.00819221 Jy ! Component: 900 - total flux cleaned = -0.00824552 Jy ! Component: 950 - total flux cleaned = -0.00834851 Jy ! Component: 1000 - total flux cleaned = -0.00839881 Jy ! Component: 1050 - total flux cleaned = -0.00834994 Jy ! Component: 1100 - total flux cleaned = -0.00859264 Jy ! Component: 1150 - total flux cleaned = -0.00863987 Jy ! Component: 1200 - total flux cleaned = -0.0086403 Jy ! Component: 1250 - total flux cleaned = -0.00868624 Jy ! Component: 1300 - total flux cleaned = -0.00873109 Jy ! Component: 1350 - total flux cleaned = -0.00864436 Jy ! Component: 1400 - total flux cleaned = -0.00855891 Jy ! Component: 1450 - total flux cleaned = -0.00855917 Jy ! Component: 1500 - total flux cleaned = -0.00843603 Jy ! Component: 1550 - total flux cleaned = -0.00831499 Jy ! Component: 1600 - total flux cleaned = -0.00815804 Jy ! Component: 1650 - total flux cleaned = -0.008198 Jy ! Component: 1700 - total flux cleaned = -0.00823664 Jy ! Component: 1750 - total flux cleaned = -0.00812423 Jy ! Component: 1800 - total flux cleaned = -0.00805065 Jy ! Component: 1850 - total flux cleaned = -0.00801449 Jy ! Component: 1900 - total flux cleaned = -0.00794256 Jy ! Component: 1950 - total flux cleaned = -0.00780222 Jy ! Component: 2000 - total flux cleaned = -0.00780258 Jy ! Component: 2050 - total flux cleaned = -0.00780279 Jy ! Component: 2100 - total flux cleaned = -0.0078032 Jy ! Component: 2150 - total flux cleaned = -0.00786923 Jy ! Component: 2200 - total flux cleaned = -0.00780368 Jy ! Component: 2250 - total flux cleaned = -0.00790022 Jy ! Component: 2300 - total flux cleaned = -0.00793128 Jy ! Component: 2350 - total flux cleaned = -0.00796266 Jy ! Component: 2400 - total flux cleaned = -0.00802423 Jy ! Component: 2450 - total flux cleaned = -0.00814625 Jy ! Component: 2500 - total flux cleaned = -0.00820635 Jy ! Component: 2550 - total flux cleaned = -0.00826549 Jy ! Component: 2600 - total flux cleaned = -0.00820657 Jy ! Component: 2650 - total flux cleaned = -0.00832306 Jy ! Component: 2700 - total flux cleaned = -0.00832285 Jy ! Component: 2750 - total flux cleaned = -0.00832318 Jy ! Component: 2800 - total flux cleaned = -0.00821079 Jy ! Component: 2850 - total flux cleaned = -0.00823872 Jy ! Component: 2900 - total flux cleaned = -0.00815587 Jy ! Component: 2950 - total flux cleaned = -0.0080462 Jy ! Component: 3000 - total flux cleaned = -0.00799213 Jy ! Component: 3050 - total flux cleaned = -0.00793827 Jy ! Component: 3100 - total flux cleaned = -0.00780525 Jy ! Component: 3150 - total flux cleaned = -0.0077527 Jy ! Component: 3200 - total flux cleaned = -0.00767416 Jy ! Component: 3250 - total flux cleaned = -0.00762258 Jy ! Component: 3300 - total flux cleaned = -0.00757114 Jy ! Component: 3350 - total flux cleaned = -0.00749463 Jy ! Component: 3400 - total flux cleaned = -0.00744392 Jy ! Component: 3450 - total flux cleaned = -0.00739341 Jy ! Component: 3500 - total flux cleaned = -0.00731836 Jy ! Component: 3550 - total flux cleaned = -0.00724374 Jy ! Component: 3600 - total flux cleaned = -0.00721898 Jy ! Component: 3650 - total flux cleaned = -0.00712064 Jy ! Component: 3700 - total flux cleaned = -0.00707175 Jy ! Component: 3750 - total flux cleaned = -0.00699912 Jy ! Component: 3800 - total flux cleaned = -0.00695115 Jy ! Component: 3850 - total flux cleaned = -0.00692731 Jy ! Component: 3900 - total flux cleaned = -0.00687983 Jy ! Component: 3950 - total flux cleaned = -0.00683258 Jy ! Component: 4000 - total flux cleaned = -0.00673848 Jy ! Component: 4050 - total flux cleaned = -0.00680882 Jy ! Total flux subtracted in 4096 components = -0.0067386 Jy ! Clean residual min=-0.001350 max=0.001738 Jy/beam ! Clean residual mean=0.000005 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 1.53385 Jy keep ! Adding 229 model components to the UV plane model. ! The established model now contains 422 components and 1.53385 Jy ![Exited script file: muppet] wmap "J1911-2006_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.876 x 15.4 at 20.81 degrees (North through East) ! Clean map min=-0.0072165 max=1.1684 Jy/beam ! Writing clean map to FITS file: J1911-2006_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.16836 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000402331 device "J1911-2006_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1911-2006_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.103307 0.103307 0.206614 0.413227 0.826455 1.65291 3.30582 6.61164 13.2233 26.4466 52.8931 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.168 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.876 x 15.4 at 20.81 degrees (North through East) ! Clean map min=-0.0072165 max=1.1684 Jy/beam quit ! Quitting program ! Log file J1911-2006_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:36:22 2016