! Started logfile: J1756+1535_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:34:43 2016 obs J1756+1535_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1756+1535_S_2014_08_05_pus_uva.fits ! AN table 1: 62 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.575986 visibilities/baseline/integration-bin. ! Found source: J1756+1535 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 6428 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1756+1535_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.849072Jy sigma=0.009654 ! Fit after self-cal, rms=0.841517Jy sigma=0.009573 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.636 mas, bmaj=8.948 mas, bpa=2.962 degrees ! Estimated noise=1105.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121333 Jy ! Component: 100 - total flux cleaned = 0.147939 Jy ! Total flux subtracted in 100 components = 0.147939 Jy ! Clean residual min=-0.006513 max=0.008461 Jy/beam ! Clean residual mean=-0.000026 rms=0.001630 Jy/beam ! Combined flux in latest and established models = 0.147939 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.147939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095442Jy sigma=0.000810 ! Fit after self-cal, rms=0.095437Jy sigma=0.000810 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.68 mas, bmaj=9.686 mas, bpa=3.941 degrees ! Estimated noise=799.684 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105471 Jy ! Component: 100 - total flux cleaned = 0.0151428 Jy ! Component: 150 - total flux cleaned = 0.0175653 Jy ! Component: 200 - total flux cleaned = 0.0190012 Jy ! Total flux subtracted in 200 components = 0.0190012 Jy ! Clean residual min=-0.004467 max=0.003177 Jy/beam ! Clean residual mean=-0.000012 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.16694 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 54 components and 0.16694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093524Jy sigma=0.000801 ! Fit after self-cal, rms=0.093515Jy sigma=0.000801 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.86 HN 0.98 KP 1.09 ! LA 1.10 MK 1.00* NL 0.92 OV 1.00 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 1.04 KP 1.02 ! LA 1.03 MK 1.00* NL 0.97 OV 1.03 ! PT 1.04 SC 1.06 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.13 HN 1.03 KP 0.93 ! LA 0.84 MK 1.00* NL 1.02 OV 0.97 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.94 HN 1.03 KP 0.88 ! LA 0.84 MK 1.00* NL 1.10 OV 1.02 ! PT 1.05 SC 0.99 ! ! ! Fit before self-cal, rms=0.093515Jy sigma=0.000801 ! Fit after self-cal, rms=0.088108Jy sigma=0.000782 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.699 mas, bmaj=9.7 mas, bpa=3.718 degrees ! Estimated noise=807.328 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000307776 Jy ! Component: 100 - total flux cleaned = 0.000281906 Jy ! Component: 150 - total flux cleaned = 0.000285118 Jy ! Component: 200 - total flux cleaned = 0.000266194 Jy ! Total flux subtracted in 200 components = 0.000266194 Jy ! Clean residual min=-0.003826 max=0.002905 Jy/beam ! Clean residual mean=-0.000013 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.167207 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 65 components and 0.167207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088026Jy sigma=0.000782 ! Fit after self-cal, rms=0.087995Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087995Jy sigma=0.000782 ! Fit after self-cal, rms=0.086829Jy sigma=0.000778 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.701 mas, bmaj=9.722 mas, bpa=3.61 degrees ! Estimated noise=813.319 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000835594 Jy ! Component: 100 - total flux cleaned = 0.000769118 Jy ! Component: 150 - total flux cleaned = 0.000752643 Jy ! Component: 200 - total flux cleaned = 0.000712816 Jy ! Total flux subtracted in 200 components = 0.000712816 Jy ! Clean residual min=-0.003025 max=0.002808 Jy/beam ! Clean residual mean=-0.000020 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.167919 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 71 components and 0.167919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086758Jy sigma=0.000778 ! Fit after self-cal, rms=0.086760Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.20658e-05 Jy ! Component: 100 - total flux cleaned = -6.15844e-05 Jy ! Component: 150 - total flux cleaned = -6.99513e-05 Jy ! Component: 200 - total flux cleaned = -7.00446e-05 Jy ! Total flux subtracted in 200 components = -7.00446e-05 Jy ! Clean residual min=-0.003014 max=0.002788 Jy/beam ! Clean residual mean=-0.000020 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.167849 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 81 components and 0.167849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086755Jy sigma=0.000778 ! Fit after self-cal, rms=0.086754Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086754Jy sigma=0.000778 ! Fit after self-cal, rms=0.073457Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.718 mas, bmaj=9.724 mas, bpa=3.732 degrees ! Estimated noise=813.733 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000910457 Jy ! Component: 100 - total flux cleaned = -0.00103921 Jy ! Component: 150 - total flux cleaned = -0.00107805 Jy ! Component: 200 - total flux cleaned = -0.00112042 Jy ! Total flux subtracted in 200 components = -0.00112042 Jy ! Clean residual min=-0.002351 max=0.002357 Jy/beam ! Clean residual mean=0.000000 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.166729 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 104 components and 0.166729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073447Jy sigma=0.000762 ! Fit after self-cal, rms=0.073431Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.0292e-05 Jy ! Component: 100 - total flux cleaned = -8.8974e-05 Jy ! Component: 150 - total flux cleaned = -0.000118417 Jy ! Component: 200 - total flux cleaned = -0.000138294 Jy ! Total flux subtracted in 200 components = -0.000138294 Jy ! Clean residual min=-0.002349 max=0.002335 Jy/beam ! Clean residual mean=0.000000 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.166591 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 110 components and 0.166591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073429Jy sigma=0.000762 ! Fit after self-cal, rms=0.073429Jy sigma=0.000762 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073429Jy sigma=0.000762 ! Fit after self-cal, rms=0.073552Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.722 mas, bmaj=11.22 mas, bpa=-6.618 degrees ! Estimated noise=877.122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000453672 Jy ! Component: 100 - total flux cleaned = -0.00048007 Jy ! Component: 150 - total flux cleaned = -0.000494829 Jy ! Component: 200 - total flux cleaned = -0.000489093 Jy ! Total flux subtracted in 200 components = -0.000489093 Jy ! Clean residual min=-0.002096 max=0.002191 Jy/beam ! Clean residual mean=0.000002 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.166102 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 114 components and 0.166102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073552Jy sigma=0.000762 ! Fit after self-cal, rms=0.073554Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.09244e-05 Jy ! Component: 100 - total flux cleaned = -9.33577e-06 Jy ! Component: 150 - total flux cleaned = 9.81096e-07 Jy ! Component: 200 - total flux cleaned = 5.76967e-06 Jy ! Total flux subtracted in 200 components = 5.76967e-06 Jy ! Clean residual min=-0.002099 max=0.002180 Jy/beam ! Clean residual mean=0.000002 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.166107 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 118 components and 0.166107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073554Jy sigma=0.000762 ! Fit after self-cal, rms=0.073554Jy sigma=0.000762 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.729 mas, bmaj=9.735 mas, bpa=3.784 degrees ! Estimated noise=814.236 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.729 x 9.735 at 3.784 degrees (North through East) ! Clean map min=-0.0023025 max=0.15977 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.679 mas, bmaj=8.992 mas, bpa=2.898 degrees ! Estimated noise=1129.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123898 Jy ! Component: 100 - total flux cleaned = 0.150928 Jy ! Component: 150 - total flux cleaned = 0.159168 Jy ! Component: 200 - total flux cleaned = 0.163217 Jy ! Total flux subtracted in 200 components = 0.163217 Jy ! Clean residual min=-0.003702 max=0.003294 Jy/beam ! Clean residual mean=-0.000003 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.163217 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.163217 Jy ! Inverting map and beam ! Estimated beam: bmin=5.729 mas, bmaj=9.735 mas, bpa=3.784 degrees ! Estimated noise=814.236 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216698 Jy ! Component: 100 - total flux cleaned = 0.00251926 Jy ! Component: 150 - total flux cleaned = 0.00261614 Jy ! Component: 200 - total flux cleaned = 0.00261505 Jy ! Total flux subtracted in 200 components = 0.00261505 Jy ! Clean residual min=-0.002345 max=0.002414 Jy/beam ! Clean residual mean=0.000001 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.165832 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 38 components and 0.165832 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.722 mas, bmaj=11.22 mas, bpa=-6.618 degrees ! Estimated noise=877.122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551404 Jy ! Component: 100 - total flux cleaned = 0.000566804 Jy ! Component: 150 - total flux cleaned = 0.000544038 Jy ! Component: 200 - total flux cleaned = 0.000524876 Jy ! Total flux subtracted in 200 components = 0.000524876 Jy ! Clean residual min=-0.002078 max=0.002227 Jy/beam ! Clean residual mean=0.000002 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.166357 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.12272e-06 Jy ! Component: 100 - total flux cleaned = -2.1827e-05 Jy ! Component: 150 - total flux cleaned = -3.4376e-05 Jy ! Component: 200 - total flux cleaned = -3.99609e-05 Jy ! Total flux subtracted in 200 components = -3.99609e-05 Jy ! Clean residual min=-0.002082 max=0.002208 Jy/beam ! Clean residual mean=0.000002 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.166317 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 55 components and 0.166317 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.729 mas, bmaj=9.735 mas, bpa=3.784 degrees ! Estimated noise=814.236 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000106498 Jy ! Component: 100 - total flux cleaned = -0.000149184 Jy ! Component: 150 - total flux cleaned = -0.000186865 Jy ! Component: 200 - total flux cleaned = -0.000221599 Jy ! Total flux subtracted in 200 components = -0.000221599 Jy ! Clean residual min=-0.002347 max=0.002340 Jy/beam ! Clean residual mean=0.000001 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.166095 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 65 components and 0.166095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073564Jy sigma=0.000762 ! Fit after self-cal, rms=0.073563Jy sigma=0.000762 wmodel J1756+1535_S_2014_08_05_pus_map.mod ! Writing 65 model components to file: J1756+1535_S_2014_08_05_pus_map.mod wobs J1756+1535_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1756+1535_S_2014_08_05_pus_uvs.fits wwins J1756+1535_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J1756+1535_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000385638 Jy ! Component: 100 - total flux cleaned = 0.000769835 Jy ! Component: 150 - total flux cleaned = 0.00108635 Jy ! Component: 200 - total flux cleaned = 0.00131995 Jy ! Component: 250 - total flux cleaned = 0.00151399 Jy ! Component: 300 - total flux cleaned = 0.00173345 Jy ! Component: 350 - total flux cleaned = 0.00194675 Jy ! Component: 400 - total flux cleaned = 0.00209546 Jy ! Component: 450 - total flux cleaned = 0.00223999 Jy ! Component: 500 - total flux cleaned = 0.00229609 Jy ! Component: 550 - total flux cleaned = 0.00232356 Jy ! Component: 600 - total flux cleaned = 0.00240514 Jy ! Component: 650 - total flux cleaned = 0.00245821 Jy ! Component: 700 - total flux cleaned = 0.002537 Jy ! Component: 750 - total flux cleaned = 0.00269147 Jy ! Component: 800 - total flux cleaned = 0.00274186 Jy ! Component: 850 - total flux cleaned = 0.0027421 Jy ! Component: 900 - total flux cleaned = 0.00288935 Jy ! Component: 950 - total flux cleaned = 0.00293744 Jy ! Component: 1000 - total flux cleaned = 0.00291336 Jy ! Component: 1050 - total flux cleaned = 0.00296064 Jy ! Component: 1100 - total flux cleaned = 0.00302995 Jy ! Component: 1150 - total flux cleaned = 0.00309895 Jy ! Component: 1200 - total flux cleaned = 0.0031215 Jy ! Component: 1250 - total flux cleaned = 0.00318855 Jy ! Component: 1300 - total flux cleaned = 0.00332041 Jy ! Component: 1350 - total flux cleaned = 0.00327657 Jy ! Component: 1400 - total flux cleaned = 0.0032981 Jy ! Component: 1450 - total flux cleaned = 0.00336201 Jy ! Component: 1500 - total flux cleaned = 0.00340437 Jy ! Component: 1550 - total flux cleaned = 0.00352938 Jy ! Component: 1600 - total flux cleaned = 0.00357051 Jy ! Component: 1650 - total flux cleaned = 0.0035912 Jy ! Component: 1700 - total flux cleaned = 0.00365199 Jy ! Component: 1750 - total flux cleaned = 0.0036719 Jy ! Component: 1800 - total flux cleaned = 0.00369169 Jy ! Component: 1850 - total flux cleaned = 0.00373116 Jy ! Component: 1900 - total flux cleaned = 0.00384788 Jy ! Component: 1950 - total flux cleaned = 0.00384773 Jy ! Component: 2000 - total flux cleaned = 0.00386691 Jy ! Component: 2050 - total flux cleaned = 0.00386696 Jy ! Component: 2100 - total flux cleaned = 0.00388583 Jy ! Component: 2150 - total flux cleaned = 0.00386726 Jy ! Component: 2200 - total flux cleaned = 0.00386727 Jy ! Component: 2250 - total flux cleaned = 0.00383089 Jy ! Component: 2300 - total flux cleaned = 0.00383089 Jy ! Component: 2350 - total flux cleaned = 0.00383088 Jy ! Component: 2400 - total flux cleaned = 0.0038309 Jy ! Component: 2450 - total flux cleaned = 0.00381325 Jy ! Component: 2500 - total flux cleaned = 0.00379549 Jy ! Component: 2550 - total flux cleaned = 0.00379563 Jy ! Component: 2600 - total flux cleaned = 0.00381287 Jy ! Component: 2650 - total flux cleaned = 0.00379536 Jy ! Component: 2700 - total flux cleaned = 0.00372696 Jy ! Component: 2750 - total flux cleaned = 0.00370978 Jy ! Component: 2800 - total flux cleaned = 0.00364243 Jy ! Component: 2850 - total flux cleaned = 0.00355879 Jy ! Component: 2900 - total flux cleaned = 0.00347566 Jy ! Component: 2950 - total flux cleaned = 0.00349208 Jy ! Component: 3000 - total flux cleaned = 0.00342654 Jy ! Component: 3050 - total flux cleaned = 0.00344294 Jy ! Component: 3100 - total flux cleaned = 0.003378 Jy ! Component: 3150 - total flux cleaned = 0.00332977 Jy ! Component: 3200 - total flux cleaned = 0.00324965 Jy ! Component: 3250 - total flux cleaned = 0.00320187 Jy ! Component: 3300 - total flux cleaned = 0.00320191 Jy ! Component: 3350 - total flux cleaned = 0.00318613 Jy ! Component: 3400 - total flux cleaned = 0.00313925 Jy ! Component: 3450 - total flux cleaned = 0.00307732 Jy ! Component: 3500 - total flux cleaned = 0.00310824 Jy ! Component: 3550 - total flux cleaned = 0.0030009 Jy ! Component: 3600 - total flux cleaned = 0.00303146 Jy ! Component: 3650 - total flux cleaned = 0.00294074 Jy ! Component: 3700 - total flux cleaned = 0.00297074 Jy ! Component: 3750 - total flux cleaned = 0.00291108 Jy ! Component: 3800 - total flux cleaned = 0.002911 Jy ! Component: 3850 - total flux cleaned = 0.00283707 Jy ! Component: 3900 - total flux cleaned = 0.00286653 Jy ! Component: 3950 - total flux cleaned = 0.00282267 Jy ! Component: 4000 - total flux cleaned = 0.00280803 Jy ! Component: 4050 - total flux cleaned = 0.00270688 Jy ! Total flux subtracted in 4096 components = 0.00269252 Jy ! Clean residual min=-0.000876 max=0.000987 Jy/beam ! Clean residual mean=-0.000002 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.168788 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 348 components and 0.168788 Jy ![Exited script file: muppet] wmap "J1756+1535_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.729 x 9.735 at 3.784 degrees (North through East) ! Clean map min=-0.0019509 max=0.16 Jy/beam ! Writing clean map to FITS file: J1756+1535_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.159998 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000275557 device "J1756+1535_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1756+1535_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.516676 0.516676 1.03335 2.0667 4.1334 8.26681 16.5336 33.0672 66.1345 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.159 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.729 x 9.735 at 3.784 degrees (North through East) ! Clean map min=-0.0019509 max=0.16 Jy/beam quit ! Quitting program ! Log file J1756+1535_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:34:48 2016