! Started logfile: J1743-0350_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:33:47 2016 obs J1743-0350_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1743-0350_S_2014_08_05_pus_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.503175 visibilities/baseline/integration-bin. ! Found source: J1743-0350 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 3804 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1743-0350_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 165 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 165 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 165 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 165 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.244596Jy sigma=0.021337 ! Fit after self-cal, rms=2.180625Jy sigma=0.020620 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.519 mas, bmaj=9.704 mas, bpa=21.33 degrees ! Estimated noise=1506.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.28496 Jy ! Component: 100 - total flux cleaned = 2.7905 Jy ! Total flux subtracted in 100 components = 2.7905 Jy ! Clean residual min=-0.124894 max=0.173402 Jy/beam ! Clean residual mean=0.000104 rms=0.035283 Jy/beam ! Combined flux in latest and established models = 2.7905 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 2.7905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.918700Jy sigma=0.008564 ! Fit after self-cal, rms=0.918693Jy sigma=0.008564 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.198 mas, bmaj=10.8 mas, bpa=20.32 degrees ! Estimated noise=1207.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.181017 Jy ! Component: 100 - total flux cleaned = 0.251493 Jy ! Component: 150 - total flux cleaned = 0.289489 Jy ! Component: 200 - total flux cleaned = 0.309287 Jy ! Total flux subtracted in 200 components = 0.309287 Jy ! Clean residual min=-0.123569 max=0.121844 Jy/beam ! Clean residual mean=0.000136 rms=0.032944 Jy/beam ! Combined flux in latest and established models = 3.09978 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 43 components and 3.09978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.877412Jy sigma=0.008346 ! Fit after self-cal, rms=0.877400Jy sigma=0.008346 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.80 HN 0.99 KP 1.00 ! LA 1.04 MK 1.00* NL 0.92 OV 1.04 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.32 HN 1.04 KP 1.52 ! LA 1.00 MK 1.00* NL 0.93 OV 0.98 ! PT 1.06 SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.09 HN 1.05 KP 0.85 ! LA 0.79 MK 1.00* NL 0.95 OV 0.90 ! PT 1.84 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.93 HN 1.04 KP 0.83 ! LA 0.76 MK 1.00* NL 1.40 OV 0.96 ! PT 0.99 SC 0.98 ! ! ! Fit before self-cal, rms=0.877400Jy sigma=0.008346 ! Fit after self-cal, rms=0.844045Jy sigma=0.005821 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.183 mas, bmaj=10.88 mas, bpa=20.46 degrees ! Estimated noise=1202.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0123159 Jy ! Component: 100 - total flux cleaned = -0.0130234 Jy ! Component: 150 - total flux cleaned = -0.0130532 Jy ! Component: 200 - total flux cleaned = -0.0137725 Jy ! Total flux subtracted in 200 components = -0.0137725 Jy ! Clean residual min=-0.073232 max=0.093705 Jy/beam ! Clean residual mean=-0.000032 rms=0.022744 Jy/beam ! Combined flux in latest and established models = 3.08601 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 51 components and 3.08601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.842571Jy sigma=0.005814 ! Fit after self-cal, rms=0.842668Jy sigma=0.005814 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.842668Jy sigma=0.005814 ! Fit after self-cal, rms=3.953324Jy sigma=0.003743 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.162 mas, bmaj=10.81 mas, bpa=20.23 degrees ! Estimated noise=1204.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0324212 Jy ! Component: 100 - total flux cleaned = 0.0431737 Jy ! Component: 150 - total flux cleaned = 0.0458663 Jy ! Component: 200 - total flux cleaned = 0.0478889 Jy ! Total flux subtracted in 200 components = 0.0478889 Jy ! Clean residual min=-0.019860 max=0.025041 Jy/beam ! Clean residual mean=0.000008 rms=0.009414 Jy/beam ! Combined flux in latest and established models = 3.1339 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 3.1339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.950620Jy sigma=0.003729 ! Fit after self-cal, rms=3.951471Jy sigma=0.003728 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217582 Jy ! Component: 100 - total flux cleaned = 0.0038132 Jy ! Component: 150 - total flux cleaned = 0.00531543 Jy ! Component: 200 - total flux cleaned = 0.00670204 Jy ! Total flux subtracted in 200 components = 0.00670204 Jy ! Clean residual min=-0.020021 max=0.023959 Jy/beam ! Clean residual mean=0.000010 rms=0.009252 Jy/beam ! Combined flux in latest and established models = 3.1406 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 3.1406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.951066Jy sigma=0.003726 ! Fit after self-cal, rms=3.951060Jy sigma=0.003726 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.951060Jy sigma=0.003726 ! Fit after self-cal, rms=4.013038Jy sigma=0.003717 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.15 mas, bmaj=10.78 mas, bpa=20.21 degrees ! Estimated noise=1208.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196103 Jy ! Component: 100 - total flux cleaned = 0.0301602 Jy ! Component: 150 - total flux cleaned = 0.0371521 Jy ! Component: 200 - total flux cleaned = 0.0404116 Jy ! Total flux subtracted in 200 components = 0.0404116 Jy ! Clean residual min=-0.018525 max=0.021540 Jy/beam ! Clean residual mean=-0.000002 rms=0.009012 Jy/beam ! Combined flux in latest and established models = 3.18101 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 80 components and 3.18101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.010848Jy sigma=0.003717 ! Fit after self-cal, rms=4.010856Jy sigma=0.003717 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115543 Jy ! Component: 100 - total flux cleaned = 0.00238681 Jy ! Component: 150 - total flux cleaned = 0.00351827 Jy ! Component: 200 - total flux cleaned = 0.00426693 Jy ! Total flux subtracted in 200 components = 0.00426693 Jy ! Clean residual min=-0.018529 max=0.021764 Jy/beam ! Clean residual mean=-0.000000 rms=0.008963 Jy/beam ! Combined flux in latest and established models = 3.18528 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 83 components and 3.18528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.010623Jy sigma=0.003717 ! Fit after self-cal, rms=4.010627Jy sigma=0.003717 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.010627Jy sigma=0.003717 ! Fit after self-cal, rms=4.041079Jy sigma=0.003712 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.788 mas, bmaj=13.03 mas, bpa=12.47 degrees ! Estimated noise=1393.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175041 Jy ! Component: 100 - total flux cleaned = 0.026659 Jy ! Component: 150 - total flux cleaned = 0.0320961 Jy ! Component: 200 - total flux cleaned = 0.0354305 Jy ! Total flux subtracted in 200 components = 0.0354305 Jy ! Clean residual min=-0.027481 max=0.032928 Jy/beam ! Clean residual mean=-0.000011 rms=0.014303 Jy/beam ! Combined flux in latest and established models = 3.22071 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 106 components and 3.22071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.039096Jy sigma=0.003717 ! Fit after self-cal, rms=4.039092Jy sigma=0.003717 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012446 Jy ! Component: 100 - total flux cleaned = 0.00156581 Jy ! Component: 150 - total flux cleaned = 0.00187056 Jy ! Component: 200 - total flux cleaned = 0.00208886 Jy ! Total flux subtracted in 200 components = 0.00208886 Jy ! Clean residual min=-0.027581 max=0.033098 Jy/beam ! Clean residual mean=-0.000010 rms=0.014281 Jy/beam ! Combined flux in latest and established models = 3.2228 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 112 components and 3.2228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.038979Jy sigma=0.003718 ! Fit after self-cal, rms=4.038986Jy sigma=0.003718 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.141 mas, bmaj=10.76 mas, bpa=20.19 degrees ! Estimated noise=1212.56 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.141 x 10.76 at 20.19 degrees (North through East) ! Clean map min=-0.017898 max=2.9296 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.038986Jy sigma=0.003718 ! Fit after self-cal, rms=104.847427Jy sigma=0.002083 ! Inverting map and beam ! Estimated beam: bmin=4.137 mas, bmaj=10.74 mas, bpa=20.2 degrees ! Estimated noise=1216.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120832 Jy ! Component: 100 - total flux cleaned = 0.0183129 Jy ! Component: 150 - total flux cleaned = 0.0222241 Jy ! Component: 200 - total flux cleaned = 0.0239697 Jy ! Total flux subtracted in 200 components = 0.0239697 Jy ! Clean residual min=-0.017084 max=0.019584 Jy/beam ! Clean residual mean=-0.000019 rms=0.008127 Jy/beam ! Combined flux in latest and established models = 3.24677 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 120 components and 3.24677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=104.846962Jy sigma=0.002085 ! Fit after self-cal, rms=104.847023Jy sigma=0.002084 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135127 Jy ! Component: 100 - total flux cleaned = 0.00168836 Jy ! Component: 150 - total flux cleaned = 0.00199714 Jy ! Component: 200 - total flux cleaned = 0.00228144 Jy ! Total flux subtracted in 200 components = 0.00228144 Jy ! Clean residual min=-0.017241 max=0.019553 Jy/beam ! Clean residual mean=-0.000019 rms=0.008111 Jy/beam ! Combined flux in latest and established models = 3.24905 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 125 components and 3.24905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=104.846985Jy sigma=0.002085 ! Fit after self-cal, rms=104.846985Jy sigma=0.002085 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=104.846985Jy sigma=0.002085 ! Fit after self-cal, rms=106.506477Jy sigma=0.002080 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.479 mas, bmaj=9.703 mas, bpa=21.26 degrees ! Estimated noise=1493.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.26421 Jy ! Component: 100 - total flux cleaned = 2.77369 Jy ! Component: 150 - total flux cleaned = 2.95946 Jy ! Component: 200 - total flux cleaned = 3.04673 Jy ! Total flux subtracted in 200 components = 3.04673 Jy ! Clean residual min=-0.020476 max=0.040287 Jy/beam ! Clean residual mean=-0.000003 rms=0.006622 Jy/beam ! Combined flux in latest and established models = 3.04672 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 3.04672 Jy ! Inverting map and beam ! Estimated beam: bmin=4.131 mas, bmaj=10.73 mas, bpa=20.21 degrees ! Estimated noise=1220.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0693563 Jy ! Component: 100 - total flux cleaned = 0.11034 Jy ! Component: 150 - total flux cleaned = 0.138801 Jy ! Component: 200 - total flux cleaned = 0.159493 Jy ! Total flux subtracted in 200 components = 0.159493 Jy ! Clean residual min=-0.019200 max=0.020085 Jy/beam ! Clean residual mean=-0.000037 rms=0.008827 Jy/beam ! Combined flux in latest and established models = 3.20622 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 54 components and 3.20622 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.771 mas, bmaj=13.01 mas, bpa=12.52 degrees ! Estimated noise=1406.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236896 Jy ! Component: 100 - total flux cleaned = 0.0376314 Jy ! Component: 150 - total flux cleaned = 0.0462538 Jy ! Component: 200 - total flux cleaned = 0.0515131 Jy ! Total flux subtracted in 200 components = 0.0515131 Jy ! Clean residual min=-0.027350 max=0.029828 Jy/beam ! Clean residual mean=-0.000045 rms=0.013343 Jy/beam ! Combined flux in latest and established models = 3.25773 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114797 Jy ! Component: 100 - total flux cleaned = 0.00202476 Jy ! Component: 150 - total flux cleaned = 0.00268687 Jy ! Component: 200 - total flux cleaned = 0.00317135 Jy ! Total flux subtracted in 200 components = 0.00317135 Jy ! Clean residual min=-0.027298 max=0.029968 Jy/beam ! Clean residual mean=-0.000043 rms=0.013290 Jy/beam ! Combined flux in latest and established models = 3.2609 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 81 components and 3.2609 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.131 mas, bmaj=10.73 mas, bpa=20.21 degrees ! Estimated noise=1220.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00167304 Jy ! Component: 100 - total flux cleaned = -0.00241559 Jy ! Component: 150 - total flux cleaned = -0.00202017 Jy ! Component: 200 - total flux cleaned = -0.00149236 Jy ! Total flux subtracted in 200 components = -0.00149236 Jy ! Clean residual min=-0.018490 max=0.019911 Jy/beam ! Clean residual mean=-0.000026 rms=0.008184 Jy/beam ! Combined flux in latest and established models = 3.25941 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 91 components and 3.25941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=106.506035Jy sigma=0.002082 ! Fit after self-cal, rms=106.506035Jy sigma=0.002082 wmodel J1743-0350_S_2014_08_05_pus_map.mod ! Writing 91 model components to file: J1743-0350_S_2014_08_05_pus_map.mod wobs J1743-0350_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1743-0350_S_2014_08_05_pus_uvs.fits wwins J1743-0350_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J1743-0350_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00536605 Jy ! Component: 100 - total flux cleaned = 0.00930131 Jy ! Component: 150 - total flux cleaned = 0.0130565 Jy ! Component: 200 - total flux cleaned = 0.0160693 Jy ! Component: 250 - total flux cleaned = 0.0184021 Jy ! Component: 300 - total flux cleaned = 0.0218055 Jy ! Component: 350 - total flux cleaned = 0.0254119 Jy ! Component: 400 - total flux cleaned = 0.0286728 Jy ! Component: 450 - total flux cleaned = 0.0316117 Jy ! Component: 500 - total flux cleaned = 0.0347612 Jy ! Component: 550 - total flux cleaned = 0.0381138 Jy ! Component: 600 - total flux cleaned = 0.0408972 Jy ! Component: 650 - total flux cleaned = 0.0431475 Jy ! Component: 700 - total flux cleaned = 0.0448714 Jy ! Component: 750 - total flux cleaned = 0.0468121 Jy ! Component: 800 - total flux cleaned = 0.0482508 Jy ! Component: 850 - total flux cleaned = 0.0508574 Jy ! Component: 900 - total flux cleaned = 0.0517941 Jy ! Component: 950 - total flux cleaned = 0.053415 Jy ! Component: 1000 - total flux cleaned = 0.0538741 Jy ! Component: 1050 - total flux cleaned = 0.053877 Jy ! Component: 1100 - total flux cleaned = 0.0547779 Jy ! Component: 1150 - total flux cleaned = 0.0552238 Jy ! Component: 1200 - total flux cleaned = 0.0554417 Jy ! Component: 1250 - total flux cleaned = 0.0554397 Jy ! Component: 1300 - total flux cleaned = 0.0554393 Jy ! Component: 1350 - total flux cleaned = 0.055869 Jy ! Component: 1400 - total flux cleaned = 0.0556543 Jy ! Component: 1450 - total flux cleaned = 0.0556569 Jy ! Component: 1500 - total flux cleaned = 0.0558701 Jy ! Component: 1550 - total flux cleaned = 0.0560831 Jy ! Component: 1600 - total flux cleaned = 0.0565003 Jy ! Component: 1650 - total flux cleaned = 0.0562931 Jy ! Component: 1700 - total flux cleaned = 0.0567049 Jy ! Component: 1750 - total flux cleaned = 0.0567062 Jy ! Component: 1800 - total flux cleaned = 0.05691 Jy ! Component: 1850 - total flux cleaned = 0.0571129 Jy ! Component: 1900 - total flux cleaned = 0.0575144 Jy ! Component: 1950 - total flux cleaned = 0.0587096 Jy ! Component: 2000 - total flux cleaned = 0.0587086 Jy ! Component: 2050 - total flux cleaned = 0.0591035 Jy ! Component: 2100 - total flux cleaned = 0.0596906 Jy ! Component: 2150 - total flux cleaned = 0.0594963 Jy ! Component: 2200 - total flux cleaned = 0.060079 Jy ! Component: 2250 - total flux cleaned = 0.0604661 Jy ! Component: 2300 - total flux cleaned = 0.0614275 Jy ! Component: 2350 - total flux cleaned = 0.0614293 Jy ! Component: 2400 - total flux cleaned = 0.0623794 Jy ! Component: 2450 - total flux cleaned = 0.063137 Jy ! Component: 2500 - total flux cleaned = 0.0635135 Jy ! Component: 2550 - total flux cleaned = 0.0640758 Jy ! Component: 2600 - total flux cleaned = 0.064821 Jy ! Component: 2650 - total flux cleaned = 0.0650072 Jy ! Component: 2700 - total flux cleaned = 0.0653776 Jy ! Component: 2750 - total flux cleaned = 0.0659306 Jy ! Component: 2800 - total flux cleaned = 0.066113 Jy ! Component: 2850 - total flux cleaned = 0.066294 Jy ! Component: 2900 - total flux cleaned = 0.0657483 Jy ! Component: 2950 - total flux cleaned = 0.0659302 Jy ! Component: 3000 - total flux cleaned = 0.0666511 Jy ! Component: 3050 - total flux cleaned = 0.066291 Jy ! Component: 3100 - total flux cleaned = 0.067005 Jy ! Component: 3150 - total flux cleaned = 0.0671819 Jy ! Component: 3200 - total flux cleaned = 0.0671815 Jy ! Component: 3250 - total flux cleaned = 0.0675355 Jy ! Component: 3300 - total flux cleaned = 0.067535 Jy ! Component: 3350 - total flux cleaned = 0.0680609 Jy ! Component: 3400 - total flux cleaned = 0.0682348 Jy ! Component: 3450 - total flux cleaned = 0.068409 Jy ! Component: 3500 - total flux cleaned = 0.0682363 Jy ! Component: 3550 - total flux cleaned = 0.0682351 Jy ! Component: 3600 - total flux cleaned = 0.0680633 Jy ! Component: 3650 - total flux cleaned = 0.0684069 Jy ! Component: 3700 - total flux cleaned = 0.0687479 Jy ! Component: 3750 - total flux cleaned = 0.0684058 Jy ! Component: 3800 - total flux cleaned = 0.0687453 Jy ! Component: 3850 - total flux cleaned = 0.069083 Jy ! Component: 3900 - total flux cleaned = 0.069588 Jy ! Component: 3950 - total flux cleaned = 0.0692524 Jy ! Component: 4000 - total flux cleaned = 0.0689181 Jy ! Component: 4050 - total flux cleaned = 0.069418 Jy ! Total flux subtracted in 4096 components = 0.0690851 Jy ! Clean residual min=-0.009521 max=0.009351 Jy/beam ! Clean residual mean=-0.000004 rms=0.004463 Jy/beam ! Combined flux in latest and established models = 3.32849 Jy keep ! Adding 603 model components to the UV plane model. ! The established model now contains 694 components and 3.3285 Jy ![Exited script file: muppet] wmap "J1743-0350_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.131 x 10.73 at 20.21 degrees (North through East) ! Clean map min=-0.018276 max=2.9471 Jy/beam ! Writing clean map to FITS file: J1743-0350_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.94707 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00439238 device "J1743-0350_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1743-0350_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.447126 0.447126 0.894253 1.78851 3.57701 7.15402 14.308 28.6161 57.2322 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0131 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.947 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.131 x 10.73 at 20.21 degrees (North through East) ! Clean map min=-0.018276 max=2.9471 Jy/beam quit ! Quitting program ! Log file J1743-0350_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:33:53 2016