! Started logfile: J1733-3722_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:33:36 2016 obs J1733-3722_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1733-3722_S_2014_08_05_pus_uva.fits ! AN table 1: 102 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.505882 visibilities/baseline/integration-bin. ! Found source: J1733-3722 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 9288 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1733-3722_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 346 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 347 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 339 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 333 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.686421Jy sigma=0.004759 ! Fit after self-cal, rms=0.641555Jy sigma=0.004363 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=10.03 mas, bpa=15.95 degrees ! Estimated noise=2786.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.228603 Jy ! Component: 100 - total flux cleaned = 0.357238 Jy ! Total flux subtracted in 100 components = 0.357238 Jy ! Clean residual min=-0.028116 max=0.071254 Jy/beam ! Clean residual mean=-0.001266 rms=0.012791 Jy/beam ! Combined flux in latest and established models = 0.357238 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 59 components and 0.357238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299367Jy sigma=0.002161 ! Fit after self-cal, rms=0.299138Jy sigma=0.002160 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.392 mas, bmaj=18.21 mas, bpa=23.22 degrees ! Estimated noise=1102.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.186268 Jy ! Component: 100 - total flux cleaned = 0.271186 Jy ! Component: 150 - total flux cleaned = 0.312638 Jy ! Component: 200 - total flux cleaned = 0.333207 Jy ! Total flux subtracted in 200 components = 0.333207 Jy ! Clean residual min=-0.024949 max=0.055115 Jy/beam ! Clean residual mean=-0.000975 rms=0.010517 Jy/beam ! Combined flux in latest and established models = 0.690446 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 104 components and 0.690446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177024Jy sigma=0.001153 ! Fit after self-cal, rms=0.174829Jy sigma=0.001136 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.88 HN 1.27 KP 1.03 ! LA 1.07 MK 1.00* NL 1.85 OV 1.05 ! PT 0.97 SC 1.81 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 1.24 KP 0.99 ! LA 1.01 MK 1.00* NL 1.96 OV 1.08 ! PT 0.95 SC 1.96 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.16 HN 1.43 KP 0.88 ! LA 0.79 MK 1.00* NL 1.78 OV 0.98 ! PT 0.93 SC 1.78 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 1.07 KP 0.84 ! LA 0.76 MK 1.00* NL 1.85 OV 1.01 ! PT 0.96 SC 1.54 ! ! ! Fit before self-cal, rms=0.174829Jy sigma=0.001136 ! Fit after self-cal, rms=0.186134Jy sigma=0.000855 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.308 mas, bmaj=20.63 mas, bpa=21.87 degrees ! Estimated noise=1249.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14, -14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0291482 Jy ! Component: 100 - total flux cleaned = 0.0376312 Jy ! Component: 150 - total flux cleaned = 0.0391343 Jy ! Component: 200 - total flux cleaned = 0.0403826 Jy ! Total flux subtracted in 200 components = 0.0403826 Jy ! Clean residual min=-0.012273 max=0.020744 Jy/beam ! Clean residual mean=-0.000061 rms=0.004426 Jy/beam ! Combined flux in latest and established models = 0.730829 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 143 components and 0.730828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182254Jy sigma=0.000808 ! Fit after self-cal, rms=0.183108Jy sigma=0.000802 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183108Jy sigma=0.000802 ! Fit after self-cal, rms=0.176618Jy sigma=0.000793 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.081 mas, bmaj=20.67 mas, bpa=22.8 degrees ! Estimated noise=1229.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101547 Jy ! Component: 100 - total flux cleaned = 0.01206 Jy ! Component: 150 - total flux cleaned = 0.0132412 Jy ! Component: 200 - total flux cleaned = 0.0139003 Jy ! Total flux subtracted in 200 components = 0.0139003 Jy ! Clean residual min=-0.007495 max=0.015986 Jy/beam ! Clean residual mean=-0.000039 rms=0.003071 Jy/beam ! Combined flux in latest and established models = 0.744729 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 184 components and 0.744729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175804Jy sigma=0.000785 ! Fit after self-cal, rms=0.175886Jy sigma=0.000784 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124131 Jy ! Component: 100 - total flux cleaned = 0.016084 Jy ! Component: 150 - total flux cleaned = 0.0181306 Jy ! Component: 200 - total flux cleaned = 0.0190796 Jy ! Total flux subtracted in 200 components = 0.0190796 Jy ! Clean residual min=-0.006573 max=0.006518 Jy/beam ! Clean residual mean=0.000100 rms=0.002056 Jy/beam ! Combined flux in latest and established models = 0.763808 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 227 components and 0.763808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175129Jy sigma=0.000774 ! Fit after self-cal, rms=0.175124Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175124Jy sigma=0.000774 ! Fit after self-cal, rms=0.173551Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.076 mas, bmaj=20.73 mas, bpa=22.85 degrees ! Estimated noise=1225.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00633204 Jy ! Component: 100 - total flux cleaned = 0.00750151 Jy ! Component: 150 - total flux cleaned = 0.00764807 Jy ! Component: 200 - total flux cleaned = 0.00802688 Jy ! Total flux subtracted in 200 components = 0.00802688 Jy ! Clean residual min=-0.005837 max=0.004953 Jy/beam ! Clean residual mean=-0.000008 rms=0.001571 Jy/beam ! Combined flux in latest and established models = 0.771835 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 251 components and 0.771836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173175Jy sigma=0.000768 ! Fit after self-cal, rms=0.173225Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021582 Jy ! Component: 100 - total flux cleaned = 0.000466261 Jy ! Component: 150 - total flux cleaned = 0.000690214 Jy ! Component: 200 - total flux cleaned = 0.000991938 Jy ! Total flux subtracted in 200 components = 0.000991938 Jy ! Clean residual min=-0.005740 max=0.004493 Jy/beam ! Clean residual mean=0.000001 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 0.772827 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 274 components and 0.772827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173000Jy sigma=0.000767 ! Fit after self-cal, rms=0.173026Jy sigma=0.000767 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173026Jy sigma=0.000767 ! Fit after self-cal, rms=0.169460Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.27 mas, bmaj=36.27 mas, bpa=7.552 degrees ! Estimated noise=1228.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318181 Jy ! Component: 100 - total flux cleaned = 0.00337996 Jy ! Component: 150 - total flux cleaned = 0.00354306 Jy ! Component: 200 - total flux cleaned = 0.00369489 Jy ! Total flux subtracted in 200 components = 0.00369489 Jy ! Clean residual min=-0.004845 max=0.003652 Jy/beam ! Clean residual mean=-0.000031 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 0.776522 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 306 components and 0.776522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169317Jy sigma=0.000766 ! Fit after self-cal, rms=0.169298Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284464 Jy ! Component: 100 - total flux cleaned = 0.00042516 Jy ! Component: 150 - total flux cleaned = 0.00055705 Jy ! Component: 200 - total flux cleaned = 0.000682052 Jy ! Total flux subtracted in 200 components = 0.000682052 Jy ! Clean residual min=-0.004750 max=0.003580 Jy/beam ! Clean residual mean=-0.000028 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.777204 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 333 components and 0.777204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169215Jy sigma=0.000765 ! Fit after self-cal, rms=0.169201Jy sigma=0.000765 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.02 mas, bmaj=20.72 mas, bpa=23.01 degrees ! Estimated noise=1219.72 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.02 x 20.72 at 23.01 degrees (North through East) ! Clean map min=-0.0067812 max=0.34055 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=10.29 mas, bpa=16.59 degrees ! Estimated noise=3819.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.297351 Jy ! Component: 100 - total flux cleaned = 0.451653 Jy ! Component: 150 - total flux cleaned = 0.537094 Jy ! Component: 200 - total flux cleaned = 0.591653 Jy ! Total flux subtracted in 200 components = 0.591653 Jy ! Clean residual min=-0.020819 max=0.031005 Jy/beam ! Clean residual mean=-0.000721 rms=0.006815 Jy/beam ! Combined flux in latest and established models = 0.591653 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 89 model components to the UV plane model. ! The established model now contains 89 components and 0.591653 Jy ! Inverting map and beam ! Estimated beam: bmin=5.02 mas, bmaj=20.72 mas, bpa=23.01 degrees ! Estimated noise=1219.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0659711 Jy ! Component: 100 - total flux cleaned = 0.103095 Jy ! Component: 150 - total flux cleaned = 0.126675 Jy ! Component: 200 - total flux cleaned = 0.142433 Jy ! Total flux subtracted in 200 components = 0.142433 Jy ! Clean residual min=-0.008184 max=0.009219 Jy/beam ! Clean residual mean=-0.000279 rms=0.002947 Jy/beam ! Combined flux in latest and established models = 0.734086 Jy ! Adding 103 model components to the UV plane model. ! The established model now contains 188 components and 0.734086 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.27 mas, bmaj=36.27 mas, bpa=7.552 degrees ! Estimated noise=1228.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129962 Jy ! Component: 100 - total flux cleaned = 0.0221528 Jy ! Component: 150 - total flux cleaned = 0.029114 Jy ! Component: 200 - total flux cleaned = 0.0345433 Jy ! Total flux subtracted in 200 components = 0.0345433 Jy ! Clean residual min=-0.005826 max=0.004950 Jy/beam ! Clean residual mean=-0.000102 rms=0.001869 Jy/beam ! Combined flux in latest and established models = 0.768629 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00365398 Jy ! Component: 100 - total flux cleaned = 0.0054053 Jy ! Component: 150 - total flux cleaned = 0.00642757 Jy ! Component: 200 - total flux cleaned = 0.00734361 Jy ! Total flux subtracted in 200 components = 0.00734361 Jy ! Clean residual min=-0.005032 max=0.004258 Jy/beam ! Clean residual mean=-0.000054 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 0.775973 Jy ! Adding 132 model components to the UV plane model. ! The established model now contains 319 components and 0.775973 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.02 mas, bmaj=20.72 mas, bpa=23.01 degrees ! Estimated noise=1219.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000812116 Jy ! Component: 100 - total flux cleaned = 0.00133533 Jy ! Component: 150 - total flux cleaned = 0.00203673 Jy ! Component: 200 - total flux cleaned = 0.00245498 Jy ! Total flux subtracted in 200 components = 0.00245498 Jy ! Clean residual min=-0.004966 max=0.004142 Jy/beam ! Clean residual mean=-0.000024 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 0.778428 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 338 components and 0.778428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168868Jy sigma=0.000765 ! Fit after self-cal, rms=0.169189Jy sigma=0.000765 wmodel J1733-3722_S_2014_08_05_pus_map.mod ! Writing 338 model components to file: J1733-3722_S_2014_08_05_pus_map.mod wobs J1733-3722_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1733-3722_S_2014_08_05_pus_uvs.fits wwins J1733-3722_S_2014_08_05_pus_map.win ! wwins: Wrote 3 windows to J1733-3722_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114458 Jy ! Component: 100 - total flux cleaned = -0.00142722 Jy ! Component: 150 - total flux cleaned = -0.00210456 Jy ! Component: 200 - total flux cleaned = -0.00281185 Jy ! Component: 250 - total flux cleaned = -0.00336565 Jy ! Component: 300 - total flux cleaned = -0.00401809 Jy ! Component: 350 - total flux cleaned = -0.00459386 Jy ! Component: 400 - total flux cleaned = -0.00526644 Jy ! Component: 450 - total flux cleaned = -0.00575694 Jy ! Component: 500 - total flux cleaned = -0.00618211 Jy ! Component: 550 - total flux cleaned = -0.00664863 Jy ! Component: 600 - total flux cleaned = -0.00710393 Jy ! Component: 650 - total flux cleaned = -0.00749865 Jy ! Component: 700 - total flux cleaned = -0.00778737 Jy ! Component: 750 - total flux cleaned = -0.00797462 Jy ! Component: 800 - total flux cleaned = -0.00802092 Jy ! Component: 850 - total flux cleaned = -0.00820202 Jy ! Component: 900 - total flux cleaned = -0.00811338 Jy ! Component: 950 - total flux cleaned = -0.00824452 Jy ! Component: 1000 - total flux cleaned = -0.00824493 Jy ! Component: 1050 - total flux cleaned = -0.00828788 Jy ! Component: 1100 - total flux cleaned = -0.00849615 Jy ! Component: 1150 - total flux cleaned = -0.00857777 Jy ! Component: 1200 - total flux cleaned = -0.008618 Jy ! Component: 1250 - total flux cleaned = -0.00865747 Jy ! Component: 1300 - total flux cleaned = -0.0086577 Jy ! Component: 1350 - total flux cleaned = -0.00877415 Jy ! Component: 1400 - total flux cleaned = -0.00885037 Jy ! Component: 1450 - total flux cleaned = -0.00862388 Jy ! Component: 1500 - total flux cleaned = -0.00869866 Jy ! Component: 1550 - total flux cleaned = -0.00862455 Jy ! Component: 1600 - total flux cleaned = -0.00851468 Jy ! Component: 1650 - total flux cleaned = -0.00837082 Jy ! Component: 1700 - total flux cleaned = -0.00822916 Jy ! Component: 1750 - total flux cleaned = -0.00822915 Jy ! Component: 1800 - total flux cleaned = -0.00809028 Jy ! Component: 1850 - total flux cleaned = -0.00791907 Jy ! Component: 1900 - total flux cleaned = -0.00764802 Jy ! Component: 1950 - total flux cleaned = -0.00751375 Jy ! Component: 2000 - total flux cleaned = -0.00724788 Jy ! Component: 2050 - total flux cleaned = -0.0070505 Jy ! Component: 2100 - total flux cleaned = -0.00685493 Jy ! Component: 2150 - total flux cleaned = -0.00669331 Jy ! Component: 2200 - total flux cleaned = -0.00653314 Jy ! Component: 2250 - total flux cleaned = -0.00634276 Jy ! Component: 2300 - total flux cleaned = -0.00612252 Jy ! Component: 2350 - total flux cleaned = -0.00593541 Jy ! Component: 2400 - total flux cleaned = -0.00578073 Jy ! Component: 2450 - total flux cleaned = -0.00553538 Jy ! Component: 2500 - total flux cleaned = -0.00538315 Jy ! Component: 2550 - total flux cleaned = -0.00517191 Jy ! Component: 2600 - total flux cleaned = -0.0050222 Jy ! Component: 2650 - total flux cleaned = -0.00481436 Jy ! Component: 2700 - total flux cleaned = -0.00460802 Jy ! Component: 2750 - total flux cleaned = -0.00440326 Jy ! Component: 2800 - total flux cleaned = -0.00428687 Jy ! Component: 2850 - total flux cleaned = -0.00402727 Jy ! Component: 2900 - total flux cleaned = -0.00385557 Jy ! Component: 2950 - total flux cleaned = -0.00368505 Jy ! Component: 3000 - total flux cleaned = -0.00351573 Jy ! Component: 3050 - total flux cleaned = -0.00337551 Jy ! Component: 3100 - total flux cleaned = -0.00318018 Jy ! Component: 3150 - total flux cleaned = -0.00290271 Jy ! Component: 3200 - total flux cleaned = -0.00270979 Jy ! Component: 3250 - total flux cleaned = -0.002463 Jy ! Component: 3300 - total flux cleaned = -0.00219035 Jy ! Component: 3350 - total flux cleaned = -0.00200068 Jy ! Component: 3400 - total flux cleaned = -0.00173126 Jy ! Component: 3450 - total flux cleaned = -0.00157045 Jy ! Component: 3500 - total flux cleaned = -0.00143692 Jy ! Component: 3550 - total flux cleaned = -0.00117159 Jy ! Component: 3600 - total flux cleaned = -0.00111879 Jy ! Component: 3650 - total flux cleaned = -0.000934878 Jy ! Component: 3700 - total flux cleaned = -0.000804196 Jy ! Component: 3750 - total flux cleaned = -0.000699937 Jy ! Component: 3800 - total flux cleaned = -0.000544231 Jy ! Component: 3850 - total flux cleaned = -0.000363614 Jy ! Component: 3900 - total flux cleaned = -0.000158181 Jy ! Component: 3950 - total flux cleaned = -3.03199e-05 Jy ! Component: 4000 - total flux cleaned = 9.69847e-05 Jy ! Component: 4050 - total flux cleaned = 0.000249332 Jy ! Total flux subtracted in 4096 components = 0.0003504 Jy ! Clean residual min=-0.001487 max=0.001589 Jy/beam ! Clean residual mean=0.000036 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.778779 Jy keep ! Adding 224 model components to the UV plane model. ! The established model now contains 562 components and 0.778779 Jy ![Exited script file: muppet] wmap "J1733-3722_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.02 x 20.72 at 23.01 degrees (North through East) ! Clean map min=-0.0050226 max=0.32781 Jy/beam ! Writing clean map to FITS file: J1733-3722_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.327808 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00047083 device "J1733-3722_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1733-3722_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.43089 0.43089 0.861779 1.72356 3.44712 6.89423 13.7885 27.5769 55.1539 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.327 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.02 x 20.72 at 23.01 degrees (North through East) ! Clean map min=-0.0050226 max=0.32781 Jy/beam quit ! Quitting program ! Log file J1733-3722_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:33:41 2016