! Started logfile: J1651+0129_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:32:38 2016
obs J1651+0129_S_2014_08_05_pus_uva.fits
! Reading UV FITS file: J1651+0129_S_2014_08_05_pus_uva.fits
! AN table 1: 56 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.67381 visibilities/baseline/integration-bin.
! Found source: J1651+0129
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 360 lines of history.
! 
! Reading 6792 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1651+0129_S_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 100 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 100 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 100 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 100 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.564884Jy  sigma=0.005900
! Fit after  self-cal, rms=0.495827Jy  sigma=0.005111
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.924 mas, bmaj=9.558 mas, bpa=15.3 degrees
! Estimated noise=1002.93 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.400689 Jy
! Component: 100  -  total flux cleaned = 0.492721 Jy
! Total flux subtracted in 100 components = 0.492721 Jy
! Clean residual min=-0.017309 max=0.032865 Jy/beam
! Clean residual mean=-0.000099 rms=0.005717 Jy/beam
! Combined flux in latest and established models = 0.492721 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.492721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134108Jy  sigma=0.001179
! Fit after  self-cal, rms=0.134108Jy  sigma=0.001179
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.737 mas, bmaj=10.58 mas, bpa=14.84 degrees
! Estimated noise=838.317 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0367713 Jy
! Component: 100  -  total flux cleaned = 0.0543558 Jy
! Component: 150  -  total flux cleaned = 0.0646693 Jy
! Component: 200  -  total flux cleaned = 0.0707889 Jy
! Total flux subtracted in 200 components = 0.0707889 Jy
! Clean residual min=-0.014233 max=0.015066 Jy/beam
! Clean residual mean=-0.000083 rms=0.003928 Jy/beam
! Combined flux in latest and established models = 0.56351 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 28 components and 0.56351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124354Jy  sigma=0.001062
! Fit after  self-cal, rms=0.124359Jy  sigma=0.001062
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.84     HN        1.03     KP        1.03     
!   LA        1.10     MK        1.00*    NL        0.95     OV        1.00     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.08     KP        1.00     
!   LA        1.07     MK        1.00*    NL        0.99     OV        1.02     
!   PT        1.00     SC        1.05     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.15     HN        1.09     KP        0.88     
!   LA        0.84     MK        1.00*    NL        0.96     OV        0.96     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.99     HN        1.09     KP        0.86     
!   LA        0.80     MK        1.00*    NL        1.04     OV        1.01     
!   PT        1.04     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.124359Jy  sigma=0.001062
! Fit after  self-cal, rms=0.104156Jy  sigma=0.000883
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.792 mas, bmaj=10.68 mas, bpa=15.03 degrees
! Estimated noise=832.74 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0108297 Jy
! Component: 100  -  total flux cleaned = -0.015758 Jy
! Component: 150  -  total flux cleaned = -0.0163577 Jy
! Component: 200  -  total flux cleaned = -0.0164771 Jy
! Total flux subtracted in 200 components = -0.0164771 Jy
! Clean residual min=-0.009961 max=0.013651 Jy/beam
! Clean residual mean=-0.000070 rms=0.002988 Jy/beam
! Combined flux in latest and established models = 0.547033 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 40 components and 0.547033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102305Jy  sigma=0.000874
! Fit after  self-cal, rms=0.102320Jy  sigma=0.000874
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102320Jy  sigma=0.000874
! Fit after  self-cal, rms=0.095002Jy  sigma=0.000782
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.767 mas, bmaj=10.65 mas, bpa=14.84 degrees
! Estimated noise=830.366 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00380417 Jy
! Component: 100  -  total flux cleaned = -0.00379378 Jy
! Component: 150  -  total flux cleaned = -0.00379512 Jy
! Component: 200  -  total flux cleaned = -0.0040405 Jy
! Total flux subtracted in 200 components = -0.0040405 Jy
! Clean residual min=-0.003823 max=0.004040 Jy/beam
! Clean residual mean=-0.000025 rms=0.000977 Jy/beam
! Combined flux in latest and established models = 0.542993 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 50 components and 0.542993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094711Jy  sigma=0.000778
! Fit after  self-cal, rms=0.094870Jy  sigma=0.000778
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000277984 Jy
! Component: 100  -  total flux cleaned = -0.00045539 Jy
! Component: 150  -  total flux cleaned = -0.000560785 Jy
! Component: 200  -  total flux cleaned = -0.000653576 Jy
! Total flux subtracted in 200 components = -0.000653576 Jy
! Clean residual min=-0.003561 max=0.003832 Jy/beam
! Clean residual mean=-0.000025 rms=0.000942 Jy/beam
! Combined flux in latest and established models = 0.542339 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 59 components and 0.542339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094824Jy  sigma=0.000777
! Fit after  self-cal, rms=0.094819Jy  sigma=0.000777
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094819Jy  sigma=0.000777
! Fit after  self-cal, rms=0.095192Jy  sigma=0.000776
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.766 mas, bmaj=10.66 mas, bpa=14.85 degrees
! Estimated noise=829.506 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00168461 Jy
! Component: 100  -  total flux cleaned = -0.0016928 Jy
! Component: 150  -  total flux cleaned = -0.00174806 Jy
! Component: 200  -  total flux cleaned = -0.00179007 Jy
! Total flux subtracted in 200 components = -0.00179007 Jy
! Clean residual min=-0.003106 max=0.003449 Jy/beam
! Clean residual mean=-0.000017 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.540549 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 62 components and 0.540549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095112Jy  sigma=0.000774
! Fit after  self-cal, rms=0.095117Jy  sigma=0.000774
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000117432 Jy
! Component: 100  -  total flux cleaned = -0.000214753 Jy
! Component: 150  -  total flux cleaned = -0.000274727 Jy
! Component: 200  -  total flux cleaned = -0.000356143 Jy
! Total flux subtracted in 200 components = -0.000356143 Jy
! Clean residual min=-0.003052 max=0.003379 Jy/beam
! Clean residual mean=-0.000018 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 0.540193 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 66 components and 0.540193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095105Jy  sigma=0.000774
! Fit after  self-cal, rms=0.095103Jy  sigma=0.000774
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095103Jy  sigma=0.000774
! Fit after  self-cal, rms=0.095354Jy  sigma=0.000774
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.145 mas, bmaj=13.14 mas, bpa=9.197 degrees
! Estimated noise=929.6 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000626528 Jy
! Component: 100  -  total flux cleaned = -0.000626098 Jy
! Component: 150  -  total flux cleaned = -0.000596118 Jy
! Component: 200  -  total flux cleaned = -0.000597843 Jy
! Total flux subtracted in 200 components = -0.000597843 Jy
! Clean residual min=-0.003205 max=0.003489 Jy/beam
! Clean residual mean=-0.000021 rms=0.000880 Jy/beam
! Combined flux in latest and established models = 0.539595 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 67 components and 0.539595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095334Jy  sigma=0.000773
! Fit after  self-cal, rms=0.095336Jy  sigma=0.000773
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.27106e-06 Jy
! Component: 100  -  total flux cleaned = 5.36067e-06 Jy
! Component: 150  -  total flux cleaned = -5.12919e-06 Jy
! Component: 200  -  total flux cleaned = -2.48458e-05 Jy
! Total flux subtracted in 200 components = -2.48458e-05 Jy
! Clean residual min=-0.003194 max=0.003451 Jy/beam
! Clean residual mean=-0.000021 rms=0.000876 Jy/beam
! Combined flux in latest and established models = 0.53957 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 73 components and 0.53957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095337Jy  sigma=0.000773
! Fit after  self-cal, rms=0.095336Jy  sigma=0.000773
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.766 mas, bmaj=10.66 mas, bpa=14.86 degrees
! Estimated noise=829.172 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.766 x 10.66 at 14.86 degrees (North through East)
! Clean map  min=-0.0027528  max=0.51331 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095336Jy  sigma=0.000773
! Fit after  self-cal, rms=0.091233Jy  sigma=0.000712
! Inverting map and beam 
! Estimated beam: bmin=4.766 mas, bmaj=10.66 mas, bpa=14.87 degrees
! Estimated noise=829.35 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000265968 Jy
! Component: 100  -  total flux cleaned = -0.000233863 Jy
! Component: 150  -  total flux cleaned = -0.000208608 Jy
! Component: 200  -  total flux cleaned = -0.000207177 Jy
! Total flux subtracted in 200 components = -0.000207177 Jy
! Clean residual min=-0.002746 max=0.002979 Jy/beam
! Clean residual mean=-0.000012 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.539363 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 80 components and 0.539363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091217Jy  sigma=0.000711
! Fit after  self-cal, rms=0.091217Jy  sigma=0.000711
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.12341e-05 Jy
! Component: 100  -  total flux cleaned = -2.81026e-05 Jy
! Component: 150  -  total flux cleaned = -4.61953e-05 Jy
! Component: 200  -  total flux cleaned = -6.23248e-05 Jy
! Total flux subtracted in 200 components = -6.23248e-05 Jy
! Clean residual min=-0.002711 max=0.002981 Jy/beam
! Clean residual mean=-0.000012 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.539301 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 81 components and 0.539301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091212Jy  sigma=0.000711
! Fit after  self-cal, rms=0.091212Jy  sigma=0.000711
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091212Jy  sigma=0.000711
! Fit after  self-cal, rms=0.091335Jy  sigma=0.000711
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.948 mas, bmaj=9.609 mas, bpa=15.27 degrees
! Estimated noise=997.28 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.39831 Jy
! Component: 100  -  total flux cleaned = 0.488692 Jy
! Component: 150  -  total flux cleaned = 0.518812 Jy
! Component: 200  -  total flux cleaned = 0.529907 Jy
! Total flux subtracted in 200 components = 0.529907 Jy
! Clean residual min=-0.004190 max=0.004313 Jy/beam
! Clean residual mean=-0.000017 rms=0.000953 Jy/beam
! Combined flux in latest and established models = 0.529906 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.529906 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.766 mas, bmaj=10.66 mas, bpa=14.88 degrees
! Estimated noise=829.464 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00482569 Jy
! Component: 100  -  total flux cleaned = 0.00690211 Jy
! Component: 150  -  total flux cleaned = 0.00731131 Jy
! Component: 200  -  total flux cleaned = 0.00763244 Jy
! Total flux subtracted in 200 components = 0.00763244 Jy
! Clean residual min=-0.003185 max=0.002839 Jy/beam
! Clean residual mean=-0.000014 rms=0.000737 Jy/beam
! Combined flux in latest and established models = 0.537539 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 31 components and 0.537539 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.144 mas, bmaj=13.14 mas, bpa=9.372 degrees
! Estimated noise=929.984 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000789452 Jy
! Component: 100  -  total flux cleaned = 0.000956014 Jy
! Component: 150  -  total flux cleaned = 0.00106324 Jy
! Component: 200  -  total flux cleaned = 0.0011349 Jy
! Total flux subtracted in 200 components = 0.0011349 Jy
! Clean residual min=-0.003117 max=0.003473 Jy/beam
! Clean residual mean=-0.000018 rms=0.000845 Jy/beam
! Combined flux in latest and established models = 0.538674 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.98852e-05 Jy
! Component: 100  -  total flux cleaned = 5.6397e-05 Jy
! Component: 150  -  total flux cleaned = 7.2253e-05 Jy
! Component: 200  -  total flux cleaned = 9.41757e-05 Jy
! Total flux subtracted in 200 components = 9.41757e-05 Jy
! Clean residual min=-0.003106 max=0.003483 Jy/beam
! Clean residual mean=-0.000018 rms=0.000844 Jy/beam
! Combined flux in latest and established models = 0.538768 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 46 components and 0.538768 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.766 mas, bmaj=10.66 mas, bpa=14.88 degrees
! Estimated noise=829.464 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00025068 Jy
! Component: 100  -  total flux cleaned = -0.000339119 Jy
! Component: 150  -  total flux cleaned = -0.000391663 Jy
! Component: 200  -  total flux cleaned = -0.000390518 Jy
! Total flux subtracted in 200 components = -0.000390518 Jy
! Clean residual min=-0.002934 max=0.002909 Jy/beam
! Clean residual mean=-0.000012 rms=0.000726 Jy/beam
! Combined flux in latest and established models = 0.538377 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 51 components and 0.538377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091354Jy  sigma=0.000711
! Fit after  self-cal, rms=0.091352Jy  sigma=0.000711
wmodel J1651+0129_S_2014_08_05_pus_map.mod
! Writing 51 model components to file: J1651+0129_S_2014_08_05_pus_map.mod
wobs J1651+0129_S_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J1651+0129_S_2014_08_05_pus_uvs.fits
wwins J1651+0129_S_2014_08_05_pus_map.win
! wwins: Wrote 1 windows to J1651+0129_S_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 7.55859e-06 Jy
! Component: 100  -  total flux cleaned = -4.41417e-05 Jy
! Component: 150  -  total flux cleaned = 8.55907e-08 Jy
! Component: 200  -  total flux cleaned = -8.56036e-05 Jy
! Component: 250  -  total flux cleaned = -0.000165744 Jy
! Component: 300  -  total flux cleaned = -0.000320491 Jy
! Component: 350  -  total flux cleaned = -0.000505826 Jy
! Component: 400  -  total flux cleaned = -0.000791794 Jy
! Component: 450  -  total flux cleaned = -0.000964707 Jy
! Component: 500  -  total flux cleaned = -0.00106454 Jy
! Component: 550  -  total flux cleaned = -0.00119505 Jy
! Component: 600  -  total flux cleaned = -0.00132059 Jy
! Component: 650  -  total flux cleaned = -0.00132043 Jy
! Component: 700  -  total flux cleaned = -0.00143989 Jy
! Component: 750  -  total flux cleaned = -0.00155562 Jy
! Component: 800  -  total flux cleaned = -0.00166834 Jy
! Component: 850  -  total flux cleaned = -0.00183302 Jy
! Component: 900  -  total flux cleaned = -0.00199342 Jy
! Component: 950  -  total flux cleaned = -0.00220206 Jy
! Component: 1000  -  total flux cleaned = -0.00225277 Jy
! Component: 1050  -  total flux cleaned = -0.00235308 Jy
! Component: 1100  -  total flux cleaned = -0.00247494 Jy
! Component: 1150  -  total flux cleaned = -0.0026182 Jy
! Component: 1200  -  total flux cleaned = -0.00271164 Jy
! Component: 1250  -  total flux cleaned = -0.00275824 Jy
! Component: 1300  -  total flux cleaned = -0.00284831 Jy
! Component: 1350  -  total flux cleaned = -0.00289266 Jy
! Component: 1400  -  total flux cleaned = -0.00297959 Jy
! Component: 1450  -  total flux cleaned = -0.00310738 Jy
! Component: 1500  -  total flux cleaned = -0.00316989 Jy
! Component: 1550  -  total flux cleaned = -0.00323162 Jy
! Component: 1600  -  total flux cleaned = -0.00331258 Jy
! Component: 1650  -  total flux cleaned = -0.00335237 Jy
! Component: 1700  -  total flux cleaned = -0.00343099 Jy
! Component: 1750  -  total flux cleaned = -0.00348889 Jy
! Component: 1800  -  total flux cleaned = -0.00352686 Jy
! Component: 1850  -  total flux cleaned = -0.00356452 Jy
! Component: 1900  -  total flux cleaned = -0.00360171 Jy
! Component: 1950  -  total flux cleaned = -0.00363822 Jy
! Component: 2000  -  total flux cleaned = -0.00376411 Jy
! Component: 2050  -  total flux cleaned = -0.00378186 Jy
! Component: 2100  -  total flux cleaned = -0.00381702 Jy
! Component: 2150  -  total flux cleaned = -0.00395505 Jy
! Component: 2200  -  total flux cleaned = -0.00398889 Jy
! Component: 2250  -  total flux cleaned = -0.00395544 Jy
! Component: 2300  -  total flux cleaned = -0.0040221 Jy
! Component: 2350  -  total flux cleaned = -0.0041038 Jy
! Component: 2400  -  total flux cleaned = -0.00408755 Jy
! Component: 2450  -  total flux cleaned = -0.00419968 Jy
! Component: 2500  -  total flux cleaned = -0.00421574 Jy
! Component: 2550  -  total flux cleaned = -0.0042785 Jy
! Component: 2600  -  total flux cleaned = -0.00432513 Jy
! Component: 2650  -  total flux cleaned = -0.00441704 Jy
! Component: 2700  -  total flux cleaned = -0.0043562 Jy
! Component: 2750  -  total flux cleaned = -0.00441637 Jy
! Component: 2800  -  total flux cleaned = -0.00444613 Jy
! Component: 2850  -  total flux cleaned = -0.00447573 Jy
! Component: 2900  -  total flux cleaned = -0.00450512 Jy
! Component: 2950  -  total flux cleaned = -0.00459206 Jy
! Component: 3000  -  total flux cleaned = -0.00459214 Jy
! Component: 3050  -  total flux cleaned = -0.00462055 Jy
! Component: 3100  -  total flux cleaned = -0.00466268 Jy
! Component: 3150  -  total flux cleaned = -0.00467651 Jy
! Component: 3200  -  total flux cleaned = -0.00466263 Jy
! Component: 3250  -  total flux cleaned = -0.00467647 Jy
! Component: 3300  -  total flux cleaned = -0.00470379 Jy
! Component: 3350  -  total flux cleaned = -0.00471723 Jy
! Component: 3400  -  total flux cleaned = -0.00475719 Jy
! Component: 3450  -  total flux cleaned = -0.00475709 Jy
! Component: 3500  -  total flux cleaned = -0.00479641 Jy
! Component: 3550  -  total flux cleaned = -0.00482247 Jy
! Component: 3600  -  total flux cleaned = -0.0048482 Jy
! Component: 3650  -  total flux cleaned = -0.00483543 Jy
! Component: 3700  -  total flux cleaned = -0.00487349 Jy
! Component: 3750  -  total flux cleaned = -0.00486085 Jy
! Component: 3800  -  total flux cleaned = -0.00486081 Jy
! Component: 3850  -  total flux cleaned = -0.00481142 Jy
! Component: 3900  -  total flux cleaned = -0.00479923 Jy
! Component: 3950  -  total flux cleaned = -0.00479935 Jy
! Component: 4000  -  total flux cleaned = -0.00476309 Jy
! Component: 4050  -  total flux cleaned = -0.0047629 Jy
! Total flux subtracted in 4096 components = -0.00475097 Jy
! Clean residual min=-0.000672 max=0.000649 Jy/beam
! Clean residual mean=-0.000003 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.533626 Jy
keep
! Adding 289 model components to the UV plane model.
! The established model now contains 340 components and 0.533627 Jy
![Exited script file: muppet]
wmap "J1651+0129_S_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.766 x 10.66 at 14.88 degrees (North through East)
! Clean map  min=-0.0016077  max=0.51394 Jy/beam
! Writing clean map to FITS file: J1651+0129_S_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.513941 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000225714 
device "J1651+0129_S_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J1651+0129_S_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.131755 0.131755 0.263509 0.527019 1.05404 2.10808 4.21615 8.4323 16.8646 33.7292 67.4584
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.513 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.766 x 10.66 at 14.88 degrees (North through East)
! Clean map  min=-0.0016077  max=0.51394 Jy/beam
quit
! Quitting program
! Log file J1651+0129_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:32:44 2016