! Started logfile: J1638+6234_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:31:54 2016 obs J1638+6234_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1638+6234_S_2014_08_05_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.685064 visibilities/baseline/integration-bin. ! Found source: J1638+6234 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 15044 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1638+6234_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006915Jy sigma=0.011207 ! Fit after self-cal, rms=0.936633Jy sigma=0.010326 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.625 mas, bmaj=7.117 mas, bpa=55.27 degrees ! Estimated noise=919.016 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0501224 Jy ! Component: 100 - total flux cleaned = 0.0779296 Jy ! Total flux subtracted in 100 components = 0.0779296 Jy ! Clean residual min=-0.018747 max=0.020683 Jy/beam ! Clean residual mean=-0.000550 rms=0.006280 Jy/beam ! Combined flux in latest and established models = 0.0779296 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.0779296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179310Jy sigma=0.001942 ! Fit after self-cal, rms=0.178601Jy sigma=0.001932 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.376 mas, bmaj=7.913 mas, bpa=56.1 degrees ! Estimated noise=528.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0464435 Jy ! Component: 100 - total flux cleaned = 0.0800986 Jy ! Component: 150 - total flux cleaned = 0.104656 Jy ! Component: 200 - total flux cleaned = 0.12257 Jy ! Total flux subtracted in 200 components = 0.12257 Jy ! Clean residual min=-0.033881 max=0.028855 Jy/beam ! Clean residual mean=-0.001201 rms=0.010352 Jy/beam ! Combined flux in latest and established models = 0.2005 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 66 components and 0.200499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163661Jy sigma=0.001734 ! Fit after self-cal, rms=0.162359Jy sigma=0.001719 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.83 FD 1.23 HN 0.75 KP 0.89 ! LA 0.59 MK 1.00* NL 1.67 OV 2.25 ! PT 0.58 SC 1.12 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 3.41 FD 1.48 HN 0.81 KP 0.91 ! LA 0.64 MK 1.00* NL 1.99 OV 2.47 ! PT 0.52 SC 1.33 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 3.08 FD 2.00 HN 0.84 KP 0.99 ! LA 0.59 MK 1.00* NL 2.25 OV 2.66 ! PT 0.39 SC 1.39 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 4.91 FD 2.43 HN 0.84 KP 1.26 ! LA 0.73 MK 1.00* NL 2.44 OV 3.58 ! PT 0.28 SC 1.47 ! ! ! Fit before self-cal, rms=0.162359Jy sigma=0.001719 ! Fit after self-cal, rms=0.376421Jy sigma=0.001414 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.472 mas, bmaj=8.175 mas, bpa=49.28 degrees ! Estimated noise=633.209 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00835847 Jy ! Component: 100 - total flux cleaned = 0.00961038 Jy ! Component: 150 - total flux cleaned = 0.0100779 Jy ! Component: 200 - total flux cleaned = 0.0102222 Jy ! Total flux subtracted in 200 components = 0.0102222 Jy ! Clean residual min=-0.027963 max=0.039384 Jy/beam ! Clean residual mean=-0.000129 rms=0.009680 Jy/beam ! Combined flux in latest and established models = 0.210722 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.210722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.374702Jy sigma=0.001418 ! Fit after self-cal, rms=0.388375Jy sigma=0.001343 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388375Jy sigma=0.001343 ! Fit after self-cal, rms=0.944479Jy sigma=0.001295 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.595 mas, bmaj=8.035 mas, bpa=53.72 degrees ! Estimated noise=719.629 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00222843 Jy ! Component: 100 - total flux cleaned = -0.00281766 Jy ! Component: 150 - total flux cleaned = -0.00298138 Jy ! Component: 200 - total flux cleaned = -0.00326578 Jy ! Total flux subtracted in 200 components = -0.00326578 Jy ! Clean residual min=-0.024108 max=0.031271 Jy/beam ! Clean residual mean=-0.000023 rms=0.009064 Jy/beam ! Combined flux in latest and established models = 0.207456 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 80 components and 0.207456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.943803Jy sigma=0.001297 ! Fit after self-cal, rms=0.945809Jy sigma=0.001288 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00216281 Jy ! Component: 100 - total flux cleaned = -0.00250182 Jy ! Component: 150 - total flux cleaned = -0.00292871 Jy ! Component: 200 - total flux cleaned = -0.00329392 Jy ! Total flux subtracted in 200 components = -0.00329392 Jy ! Clean residual min=-0.024996 max=0.032418 Jy/beam ! Clean residual mean=-0.000059 rms=0.009038 Jy/beam ! Combined flux in latest and established models = 0.204162 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 93 components and 0.204162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.945120Jy sigma=0.001290 ! Fit after self-cal, rms=0.945554Jy sigma=0.001289 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.945554Jy sigma=0.001289 ! Fit after self-cal, rms=1.334061Jy sigma=0.001282 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.758 mas, bmaj=7.905 mas, bpa=53.91 degrees ! Estimated noise=724.861 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00525689 Jy ! Component: 100 - total flux cleaned = -0.00598825 Jy ! Component: 150 - total flux cleaned = -0.00657926 Jy ! Component: 200 - total flux cleaned = -0.00695281 Jy ! Total flux subtracted in 200 components = -0.00695281 Jy ! Clean residual min=-0.024870 max=0.031657 Jy/beam ! Clean residual mean=-0.000007 rms=0.009088 Jy/beam ! Combined flux in latest and established models = 0.197209 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 96 components and 0.197209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.333273Jy sigma=0.001286 ! Fit after self-cal, rms=1.334495Jy sigma=0.001283 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122414 Jy ! Component: 100 - total flux cleaned = -0.00172248 Jy ! Component: 150 - total flux cleaned = -0.00213402 Jy ! Component: 200 - total flux cleaned = -0.00259541 Jy ! Total flux subtracted in 200 components = -0.00259541 Jy ! Clean residual min=-0.025756 max=0.033187 Jy/beam ! Clean residual mean=-0.000035 rms=0.009167 Jy/beam ! Combined flux in latest and established models = 0.194614 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 104 components and 0.194614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.333768Jy sigma=0.001286 ! Fit after self-cal, rms=1.334248Jy sigma=0.001285 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.334248Jy sigma=0.001285 ! Fit after self-cal, rms=1.854323Jy sigma=0.001280 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.301 mas, bmaj=11.7 mas, bpa=56.95 degrees ! Estimated noise=793.678 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00865184 Jy ! Component: 100 - total flux cleaned = -0.00928617 Jy ! Component: 150 - total flux cleaned = -0.00980049 Jy ! Component: 200 - total flux cleaned = -0.0102389 Jy ! Total flux subtracted in 200 components = -0.0102389 Jy ! Clean residual min=-0.041834 max=0.048791 Jy/beam ! Clean residual mean=-0.000030 rms=0.014844 Jy/beam ! Combined flux in latest and established models = 0.184375 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 109 components and 0.184375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.853508Jy sigma=0.001288 ! Fit after self-cal, rms=1.854632Jy sigma=0.001284 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146849 Jy ! Component: 100 - total flux cleaned = -0.00182929 Jy ! Component: 150 - total flux cleaned = -0.00227756 Jy ! Component: 200 - total flux cleaned = -0.00264512 Jy ! Total flux subtracted in 200 components = -0.00264512 Jy ! Clean residual min=-0.042218 max=0.050605 Jy/beam ! Clean residual mean=-0.000086 rms=0.015010 Jy/beam ! Combined flux in latest and established models = 0.18173 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 114 components and 0.18173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.853887Jy sigma=0.001292 ! Fit after self-cal, rms=1.854435Jy sigma=0.001290 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.835 mas, bmaj=7.963 mas, bpa=55.95 degrees ! Estimated noise=726.305 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.835 x 7.963 at 55.95 degrees (North through East) ! Clean map min=-0.027911 max=0.071357 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.018 mas, bmaj=6.812 mas, bpa=55.14 degrees ! Estimated noise=1313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0615343 Jy ! Component: 100 - total flux cleaned = 0.0986223 Jy ! Component: 150 - total flux cleaned = 0.123042 Jy ! Component: 200 - total flux cleaned = 0.139768 Jy ! Total flux subtracted in 200 components = 0.139768 Jy ! Clean residual min=-0.021846 max=0.025891 Jy/beam ! Clean residual mean=-0.000238 rms=0.006406 Jy/beam ! Combined flux in latest and established models = 0.139768 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.139768 Jy ! Inverting map and beam ! Estimated beam: bmin=4.835 mas, bmaj=7.963 mas, bpa=55.95 degrees ! Estimated noise=726.305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165184 Jy ! Component: 100 - total flux cleaned = 0.0256956 Jy ! Component: 150 - total flux cleaned = 0.0299849 Jy ! Component: 200 - total flux cleaned = 0.0306839 Jy ! Total flux subtracted in 200 components = 0.0306839 Jy ! Clean residual min=-0.028388 max=0.038635 Jy/beam ! Clean residual mean=-0.000181 rms=0.009593 Jy/beam ! Combined flux in latest and established models = 0.170452 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 58 components and 0.170452 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.301 mas, bmaj=11.7 mas, bpa=56.95 degrees ! Estimated noise=793.678 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00523721 Jy ! Component: 100 - total flux cleaned = 0.00575612 Jy ! Component: 150 - total flux cleaned = 0.00607878 Jy ! Component: 200 - total flux cleaned = 0.00635259 Jy ! Total flux subtracted in 200 components = 0.00635259 Jy ! Clean residual min=-0.043305 max=0.053255 Jy/beam ! Clean residual mean=-0.000190 rms=0.015145 Jy/beam ! Combined flux in latest and established models = 0.176804 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157503 Jy ! Component: 100 - total flux cleaned = 0.000231625 Jy ! Component: 150 - total flux cleaned = 0.000232806 Jy ! Component: 200 - total flux cleaned = 0.000297341 Jy ! Total flux subtracted in 200 components = 0.000297341 Jy ! Clean residual min=-0.043316 max=0.053244 Jy/beam ! Clean residual mean=-0.000183 rms=0.015139 Jy/beam ! Combined flux in latest and established models = 0.177102 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.177102 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.835 mas, bmaj=7.963 mas, bpa=55.95 degrees ! Estimated noise=726.305 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00240562 Jy ! Component: 100 - total flux cleaned = -0.0021527 Jy ! Component: 150 - total flux cleaned = -0.0018479 Jy ! Component: 200 - total flux cleaned = -0.00167939 Jy ! Total flux subtracted in 200 components = -0.00167939 Jy ! Clean residual min=-0.028677 max=0.038293 Jy/beam ! Clean residual mean=-0.000117 rms=0.009490 Jy/beam ! Combined flux in latest and established models = 0.175422 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.175422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.853281Jy sigma=0.001297 ! Fit after self-cal, rms=1.853942Jy sigma=0.001293 wmodel J1638+6234_S_2014_08_05_pus_map.mod ! Writing 74 model components to file: J1638+6234_S_2014_08_05_pus_map.mod wobs J1638+6234_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1638+6234_S_2014_08_05_pus_uvs.fits wwins J1638+6234_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J1638+6234_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158681 Jy ! Component: 100 - total flux cleaned = 0.0298023 Jy ! Component: 150 - total flux cleaned = 0.0403676 Jy ! Component: 200 - total flux cleaned = 0.049513 Jy ! Component: 250 - total flux cleaned = 0.0574052 Jy ! Component: 300 - total flux cleaned = 0.0646345 Jy ! Component: 350 - total flux cleaned = 0.0702993 Jy ! Component: 400 - total flux cleaned = 0.0758597 Jy ! Component: 450 - total flux cleaned = 0.0804103 Jy ! Component: 500 - total flux cleaned = 0.084002 Jy ! Component: 550 - total flux cleaned = 0.0888631 Jy ! Component: 600 - total flux cleaned = 0.0927835 Jy ! Component: 650 - total flux cleaned = 0.097941 Jy ! Component: 700 - total flux cleaned = 0.101755 Jy ! Component: 750 - total flux cleaned = 0.105519 Jy ! Component: 800 - total flux cleaned = 0.107589 Jy ! Component: 850 - total flux cleaned = 0.110459 Jy ! Component: 900 - total flux cleaned = 0.113704 Jy ! Component: 950 - total flux cleaned = 0.116512 Jy ! Component: 1000 - total flux cleaned = 0.119688 Jy ! Component: 1050 - total flux cleaned = 0.121653 Jy ! Component: 1100 - total flux cleaned = 0.124386 Jy ! Component: 1150 - total flux cleaned = 0.126325 Jy ! Component: 1200 - total flux cleaned = 0.129783 Jy ! Component: 1250 - total flux cleaned = 0.131686 Jy ! Component: 1300 - total flux cleaned = 0.134335 Jy ! Component: 1350 - total flux cleaned = 0.137339 Jy ! Component: 1400 - total flux cleaned = 0.139578 Jy ! Component: 1450 - total flux cleaned = 0.142172 Jy ! Component: 1500 - total flux cleaned = 0.144379 Jy ! Component: 1550 - total flux cleaned = 0.146578 Jy ! Component: 1600 - total flux cleaned = 0.148398 Jy ! Component: 1650 - total flux cleaned = 0.150567 Jy ! Component: 1700 - total flux cleaned = 0.152003 Jy ! Component: 1750 - total flux cleaned = 0.153079 Jy ! Component: 1800 - total flux cleaned = 0.154506 Jy ! Component: 1850 - total flux cleaned = 0.15557 Jy ! Component: 1900 - total flux cleaned = 0.156279 Jy ! Component: 1950 - total flux cleaned = 0.156633 Jy ! Component: 2000 - total flux cleaned = 0.158036 Jy ! Component: 2050 - total flux cleaned = 0.160125 Jy ! Component: 2100 - total flux cleaned = 0.160472 Jy ! Component: 2150 - total flux cleaned = 0.161511 Jy ! Component: 2200 - total flux cleaned = 0.162202 Jy ! Component: 2250 - total flux cleaned = 0.16392 Jy ! Component: 2300 - total flux cleaned = 0.164606 Jy ! Component: 2350 - total flux cleaned = 0.166313 Jy ! Component: 2400 - total flux cleaned = 0.165634 Jy ! Component: 2450 - total flux cleaned = 0.166654 Jy ! Component: 2500 - total flux cleaned = 0.166655 Jy ! Component: 2550 - total flux cleaned = 0.166993 Jy ! Component: 2600 - total flux cleaned = 0.167331 Jy ! Component: 2650 - total flux cleaned = 0.166994 Jy ! Component: 2700 - total flux cleaned = 0.167667 Jy ! Component: 2750 - total flux cleaned = 0.168341 Jy ! Component: 2800 - total flux cleaned = 0.168343 Jy ! Component: 2850 - total flux cleaned = 0.169014 Jy ! Component: 2900 - total flux cleaned = 0.169015 Jy ! Component: 2950 - total flux cleaned = 0.169017 Jy ! Component: 3000 - total flux cleaned = 0.170022 Jy ! Component: 3050 - total flux cleaned = 0.171027 Jy ! Component: 3100 - total flux cleaned = 0.170694 Jy ! Component: 3150 - total flux cleaned = 0.170359 Jy ! Component: 3200 - total flux cleaned = 0.170358 Jy ! Component: 3250 - total flux cleaned = 0.170693 Jy ! Component: 3300 - total flux cleaned = 0.171028 Jy ! Component: 3350 - total flux cleaned = 0.171029 Jy ! Component: 3400 - total flux cleaned = 0.170695 Jy ! Component: 3450 - total flux cleaned = 0.170694 Jy ! Component: 3500 - total flux cleaned = 0.171029 Jy ! Component: 3550 - total flux cleaned = 0.170695 Jy ! Component: 3600 - total flux cleaned = 0.170697 Jy ! Component: 3650 - total flux cleaned = 0.170695 Jy ! Component: 3700 - total flux cleaned = 0.170695 Jy ! Component: 3750 - total flux cleaned = 0.170023 Jy ! Component: 3800 - total flux cleaned = 0.170359 Jy ! Component: 3850 - total flux cleaned = 0.169349 Jy ! Component: 3900 - total flux cleaned = 0.170021 Jy ! Component: 3950 - total flux cleaned = 0.170022 Jy ! Component: 4000 - total flux cleaned = 0.169348 Jy ! Component: 4050 - total flux cleaned = 0.169012 Jy ! Total flux subtracted in 4096 components = 0.16901 Jy ! Clean residual min=-0.019765 max=0.018004 Jy/beam ! Clean residual mean=-0.000044 rms=0.007215 Jy/beam ! Combined flux in latest and established models = 0.344433 Jy keep ! Adding 521 model components to the UV plane model. ! The established model now contains 595 components and 0.344433 Jy ![Exited script file: muppet] wmap "J1638+6234_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.835 x 7.963 at 55.95 degrees (North through East) ! Clean map min=-0.044139 max=0.078624 Jy/beam ! Writing clean map to FITS file: J1638+6234_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0786239 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0070697 device "J1638+6234_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1638+6234_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -26.9754 26.9754 53.9508 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0212 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.078 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.835 x 7.963 at 55.95 degrees (North through East) ! Clean map min=-0.044139 max=0.078624 Jy/beam quit ! Quitting program ! Log file J1638+6234_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:31:59 2016