! Started logfile: J1607-3331_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:31:42 2016 obs J1607-3331_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1607-3331_S_2014_08_05_pus_uva.fits ! AN table 1: 50 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.459556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1607-3331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 4136 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1607-3331_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.940173Jy sigma=0.007053 ! Fit after self-cal, rms=0.866691Jy sigma=0.006707 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.706 mas, bmaj=18.22 mas, bpa=12.11 degrees ! Estimated noise=2078.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111665 Jy ! Component: 100 - total flux cleaned = 0.138683 Jy ! Total flux subtracted in 100 components = 0.138683 Jy ! Clean residual min=-0.009763 max=0.011615 Jy/beam ! Clean residual mean=0.000021 rms=0.002727 Jy/beam ! Combined flux in latest and established models = 0.138683 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.138683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241610Jy sigma=0.000871 ! Fit after self-cal, rms=0.241451Jy sigma=0.000870 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.287 mas, bmaj=24.08 mas, bpa=13.65 degrees ! Estimated noise=1477.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00537479 Jy ! Component: 100 - total flux cleaned = 0.0045498 Jy ! Component: 150 - total flux cleaned = 0.00389666 Jy ! Component: 200 - total flux cleaned = 0.00375516 Jy ! Total flux subtracted in 200 components = 0.00375516 Jy ! Clean residual min=-0.009261 max=0.010024 Jy/beam ! Clean residual mean=-0.000071 rms=0.002575 Jy/beam ! Combined flux in latest and established models = 0.142438 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 33 components and 0.142438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239569Jy sigma=0.000869 ! Fit after self-cal, rms=0.239524Jy sigma=0.000868 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.92 HN 1.06 KP 1.05 ! LA 1.31 MK 1.00* NL 1.00 OV 1.67 ! PT 1.05 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.66 FD 0.96 HN 1.52 KP 0.94 ! LA 0.94 MK 1.00* NL 1.09 OV 0.85 ! PT 0.90 SC 1.19 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 1.45 HN 1.29 KP 1.17 ! LA 0.96 MK 1.00* NL 0.96 OV 1.14 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 1.12 KP 0.79 ! LA 0.75 MK 1.00* NL 1.10 OV 0.91 ! PT 1.20 SC 0.93 ! ! ! Fit before self-cal, rms=0.239524Jy sigma=0.000868 ! Fit after self-cal, rms=0.172328Jy sigma=0.000828 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.283 mas, bmaj=24.85 mas, bpa=14.16 degrees ! Estimated noise=1488.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000846611 Jy ! Component: 100 - total flux cleaned = -0.00123261 Jy ! Component: 150 - total flux cleaned = -0.00155368 Jy ! Component: 200 - total flux cleaned = -0.00174103 Jy ! Total flux subtracted in 200 components = -0.00174103 Jy ! Clean residual min=-0.006998 max=0.006933 Jy/beam ! Clean residual mean=-0.000042 rms=0.002312 Jy/beam ! Combined flux in latest and established models = 0.140697 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 45 components and 0.140697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171975Jy sigma=0.000826 ! Fit after self-cal, rms=0.172155Jy sigma=0.000824 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172155Jy sigma=0.000824 ! Fit after self-cal, rms=0.158431Jy sigma=0.000797 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.279 mas, bmaj=24.64 mas, bpa=13.99 degrees ! Estimated noise=1504.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235556 Jy ! Component: 100 - total flux cleaned = 0.00209895 Jy ! Component: 150 - total flux cleaned = 0.00191152 Jy ! Component: 200 - total flux cleaned = 0.00180499 Jy ! Total flux subtracted in 200 components = 0.00180499 Jy ! Clean residual min=-0.005039 max=0.005177 Jy/beam ! Clean residual mean=-0.000014 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.142502 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 60 components and 0.142502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158174Jy sigma=0.000797 ! Fit after self-cal, rms=0.159068Jy sigma=0.000795 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000724984 Jy ! Component: 100 - total flux cleaned = -0.000875439 Jy ! Component: 150 - total flux cleaned = -0.000956792 Jy ! Component: 200 - total flux cleaned = -0.00103187 Jy ! Total flux subtracted in 200 components = -0.00103187 Jy ! Clean residual min=-0.005272 max=0.005083 Jy/beam ! Clean residual mean=-0.000009 rms=0.001455 Jy/beam ! Combined flux in latest and established models = 0.14147 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.14147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159023Jy sigma=0.000795 ! Fit after self-cal, rms=0.159021Jy sigma=0.000795 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159021Jy sigma=0.000795 ! Fit after self-cal, rms=0.166006Jy sigma=0.000795 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.239 mas, bmaj=24.49 mas, bpa=13.93 degrees ! Estimated noise=1528.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197047 Jy ! Component: 100 - total flux cleaned = 0.00173757 Jy ! Component: 150 - total flux cleaned = 0.00160426 Jy ! Component: 200 - total flux cleaned = 0.00146428 Jy ! Total flux subtracted in 200 components = 0.00146428 Jy ! Clean residual min=-0.005524 max=0.005175 Jy/beam ! Clean residual mean=-0.000010 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 0.142934 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 73 components and 0.142934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165777Jy sigma=0.000795 ! Fit after self-cal, rms=0.165956Jy sigma=0.000795 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000271839 Jy ! Component: 100 - total flux cleaned = -0.00031723 Jy ! Component: 150 - total flux cleaned = -0.00033791 Jy ! Component: 200 - total flux cleaned = -0.00035669 Jy ! Total flux subtracted in 200 components = -0.00035669 Jy ! Clean residual min=-0.005482 max=0.005175 Jy/beam ! Clean residual mean=-0.000008 rms=0.001477 Jy/beam ! Combined flux in latest and established models = 0.142578 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 75 components and 0.142578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165922Jy sigma=0.000795 ! Fit after self-cal, rms=0.165923Jy sigma=0.000795 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165923Jy sigma=0.000795 ! Fit after self-cal, rms=0.170816Jy sigma=0.000795 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.639 mas, bmaj=30.01 mas, bpa=13.83 degrees ! Estimated noise=1642.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196494 Jy ! Component: 100 - total flux cleaned = 0.00182391 Jy ! Component: 150 - total flux cleaned = 0.0016702 Jy ! Component: 200 - total flux cleaned = 0.00154927 Jy ! Total flux subtracted in 200 components = 0.00154927 Jy ! Clean residual min=-0.005756 max=0.005892 Jy/beam ! Clean residual mean=-0.000013 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 0.144127 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 88 components and 0.144127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170610Jy sigma=0.000795 ! Fit after self-cal, rms=0.170661Jy sigma=0.000795 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105825 Jy ! Component: 100 - total flux cleaned = -0.000186966 Jy ! Component: 150 - total flux cleaned = -0.000286114 Jy ! Component: 200 - total flux cleaned = -0.000354157 Jy ! Total flux subtracted in 200 components = -0.000354157 Jy ! Clean residual min=-0.005748 max=0.005954 Jy/beam ! Clean residual mean=-0.000012 rms=0.001726 Jy/beam ! Combined flux in latest and established models = 0.143773 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.143773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170619Jy sigma=0.000795 ! Fit after self-cal, rms=0.170617Jy sigma=0.000795 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.205 mas, bmaj=24.38 mas, bpa=13.89 degrees ! Estimated noise=1553.55 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.205 x 24.38 at 13.89 degrees (North through East) ! Clean map min=-0.0056133 max=0.15198 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.648 mas, bmaj=18.87 mas, bpa=12.58 degrees ! Estimated noise=2126.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113939 Jy ! Component: 100 - total flux cleaned = 0.13921 Jy ! Component: 150 - total flux cleaned = 0.147363 Jy ! Component: 200 - total flux cleaned = 0.148452 Jy ! Total flux subtracted in 200 components = 0.148452 Jy ! Clean residual min=-0.008457 max=0.006677 Jy/beam ! Clean residual mean=-0.000007 rms=0.001720 Jy/beam ! Combined flux in latest and established models = 0.148452 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.148452 Jy ! Inverting map and beam ! Estimated beam: bmin=5.205 mas, bmaj=24.38 mas, bpa=13.89 degrees ! Estimated noise=1553.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102601 Jy ! Component: 100 - total flux cleaned = -0.000468903 Jy ! Component: 150 - total flux cleaned = -0.00095821 Jy ! Component: 200 - total flux cleaned = -0.00138836 Jy ! Total flux subtracted in 200 components = -0.00138836 Jy ! Clean residual min=-0.005683 max=0.005427 Jy/beam ! Clean residual mean=-0.000015 rms=0.001590 Jy/beam ! Combined flux in latest and established models = 0.147063 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 36 components and 0.147063 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.639 mas, bmaj=30.01 mas, bpa=13.83 degrees ! Estimated noise=1642.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000793491 Jy ! Component: 100 - total flux cleaned = -0.0010998 Jy ! Component: 150 - total flux cleaned = -0.00130827 Jy ! Component: 200 - total flux cleaned = -0.00153451 Jy ! Total flux subtracted in 200 components = -0.00153451 Jy ! Clean residual min=-0.005643 max=0.005938 Jy/beam ! Clean residual mean=-0.000017 rms=0.001748 Jy/beam ! Combined flux in latest and established models = 0.145529 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196342 Jy ! Component: 100 - total flux cleaned = -0.000336597 Jy ! Component: 150 - total flux cleaned = -0.000466521 Jy ! Component: 200 - total flux cleaned = -0.000584907 Jy ! Total flux subtracted in 200 components = -0.000584907 Jy ! Clean residual min=-0.005682 max=0.005966 Jy/beam ! Clean residual mean=-0.000015 rms=0.001740 Jy/beam ! Combined flux in latest and established models = 0.144944 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 62 components and 0.144944 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.205 mas, bmaj=24.38 mas, bpa=13.89 degrees ! Estimated noise=1553.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118121 Jy ! Component: 100 - total flux cleaned = 7.57489e-05 Jy ! Component: 150 - total flux cleaned = 3.95012e-05 Jy ! Component: 200 - total flux cleaned = 4.0147e-05 Jy ! Total flux subtracted in 200 components = 4.0147e-05 Jy ! Clean residual min=-0.005826 max=0.005330 Jy/beam ! Clean residual mean=-0.000010 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.144984 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 87 components and 0.144984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170658Jy sigma=0.000795 ! Fit after self-cal, rms=0.170658Jy sigma=0.000795 wmodel J1607-3331_S_2014_08_05_pus_map.mod ! Writing 87 model components to file: J1607-3331_S_2014_08_05_pus_map.mod wobs J1607-3331_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1607-3331_S_2014_08_05_pus_uvs.fits wwins J1607-3331_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J1607-3331_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002427 Jy ! Component: 100 - total flux cleaned = 0.00119387 Jy ! Component: 150 - total flux cleaned = 0.00167582 Jy ! Component: 200 - total flux cleaned = 0.00183051 Jy ! Component: 250 - total flux cleaned = 0.00154611 Jy ! Component: 300 - total flux cleaned = 0.00141172 Jy ! Component: 350 - total flux cleaned = 0.00102288 Jy ! Component: 400 - total flux cleaned = 0.00114671 Jy ! Component: 450 - total flux cleaned = 0.000965949 Jy ! Component: 500 - total flux cleaned = 0.000789286 Jy ! Component: 550 - total flux cleaned = 0.000392757 Jy ! Component: 600 - total flux cleaned = 0.000227779 Jy ! Component: 650 - total flux cleaned = -4.16949e-05 Jy ! Component: 700 - total flux cleaned = -0.000355701 Jy ! Component: 750 - total flux cleaned = -0.000458706 Jy ! Component: 800 - total flux cleaned = -0.000658644 Jy ! Component: 850 - total flux cleaned = -0.000658084 Jy ! Component: 900 - total flux cleaned = -0.000801201 Jy ! Component: 950 - total flux cleaned = -0.000987147 Jy ! Component: 1000 - total flux cleaned = -0.00135301 Jy ! Component: 1050 - total flux cleaned = -0.0014872 Jy ! Component: 1100 - total flux cleaned = -0.0015319 Jy ! Component: 1150 - total flux cleaned = -0.00166332 Jy ! Component: 1200 - total flux cleaned = -0.00183465 Jy ! Component: 1250 - total flux cleaned = -0.00200304 Jy ! Component: 1300 - total flux cleaned = -0.00224955 Jy ! Component: 1350 - total flux cleaned = -0.0025734 Jy ! Component: 1400 - total flux cleaned = -0.00281297 Jy ! Component: 1450 - total flux cleaned = -0.00301015 Jy ! Component: 1500 - total flux cleaned = -0.00320362 Jy ! Component: 1550 - total flux cleaned = -0.0034331 Jy ! Component: 1600 - total flux cleaned = -0.00369768 Jy ! Component: 1650 - total flux cleaned = -0.00410814 Jy ! Component: 1700 - total flux cleaned = -0.00421882 Jy ! Component: 1750 - total flux cleaned = -0.0044745 Jy ! Component: 1800 - total flux cleaned = -0.00451019 Jy ! Component: 1850 - total flux cleaned = -0.00458169 Jy ! Component: 1900 - total flux cleaned = -0.00479417 Jy ! Component: 1950 - total flux cleaned = -0.00489954 Jy ! Component: 2000 - total flux cleaned = -0.00493431 Jy ! Component: 2050 - total flux cleaned = -0.0051061 Jy ! Component: 2100 - total flux cleaned = -0.00507225 Jy ! Component: 2150 - total flux cleaned = -0.00534331 Jy ! Component: 2200 - total flux cleaned = -0.00547754 Jy ! Component: 2250 - total flux cleaned = -0.00551119 Jy ! Component: 2300 - total flux cleaned = -0.00567703 Jy ! Component: 2350 - total flux cleaned = -0.00567706 Jy ! Component: 2400 - total flux cleaned = -0.00574277 Jy ! Component: 2450 - total flux cleaned = -0.00577545 Jy ! Component: 2500 - total flux cleaned = -0.00584004 Jy ! Component: 2550 - total flux cleaned = -0.00584031 Jy ! Component: 2600 - total flux cleaned = -0.00584059 Jy ! Component: 2650 - total flux cleaned = -0.00590434 Jy ! Component: 2700 - total flux cleaned = -0.00612618 Jy ! Component: 2750 - total flux cleaned = -0.00609446 Jy ! Component: 2800 - total flux cleaned = -0.00615711 Jy ! Component: 2850 - total flux cleaned = -0.00621962 Jy ! Component: 2900 - total flux cleaned = -0.00625073 Jy ! Component: 2950 - total flux cleaned = -0.00625064 Jy ! Component: 3000 - total flux cleaned = -0.00631255 Jy ! Component: 3050 - total flux cleaned = -0.00625114 Jy ! Component: 3100 - total flux cleaned = -0.00640458 Jy ! Component: 3150 - total flux cleaned = -0.0064655 Jy ! Component: 3200 - total flux cleaned = -0.00640453 Jy ! Component: 3250 - total flux cleaned = -0.0064044 Jy ! Component: 3300 - total flux cleaned = -0.00634387 Jy ! Component: 3350 - total flux cleaned = -0.00637435 Jy ! Component: 3400 - total flux cleaned = -0.00652495 Jy ! Component: 3450 - total flux cleaned = -0.00655488 Jy ! Component: 3500 - total flux cleaned = -0.00652474 Jy ! Component: 3550 - total flux cleaned = -0.00667406 Jy ! Component: 3600 - total flux cleaned = -0.00670396 Jy ! Component: 3650 - total flux cleaned = -0.00679335 Jy ! Component: 3700 - total flux cleaned = -0.0067934 Jy ! Component: 3750 - total flux cleaned = -0.00685263 Jy ! Component: 3800 - total flux cleaned = -0.00700041 Jy ! Component: 3850 - total flux cleaned = -0.00702982 Jy ! Component: 3900 - total flux cleaned = -0.00714763 Jy ! Component: 3950 - total flux cleaned = -0.00714764 Jy ! Component: 4000 - total flux cleaned = -0.00711815 Jy ! Component: 4050 - total flux cleaned = -0.00723543 Jy ! Total flux subtracted in 4096 components = -0.0072647 Jy ! Clean residual min=-0.001647 max=0.001632 Jy/beam ! Clean residual mean=-0.000032 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.137719 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 386 components and 0.137719 Jy ![Exited script file: muppet] wmap "J1607-3331_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.205 x 24.38 at 13.89 degrees (North through East) ! Clean map min=-0.0043652 max=0.15255 Jy/beam ! Writing clean map to FITS file: J1607-3331_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.152554 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000599055 device "J1607-3331_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1607-3331_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.17805 1.17805 2.3561 4.71221 9.42442 18.8488 37.6977 75.3954 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.152 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.205 x 24.38 at 13.89 degrees (North through East) ! Clean map min=-0.0043652 max=0.15255 Jy/beam quit ! Quitting program ! Log file J1607-3331_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:31:47 2016