! Started logfile: J1508-1548_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:31:03 2016 obs J1508-1548_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1508-1548_S_2014_08_05_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.761111 visibilities/baseline/integration-bin. ! Found source: J1508-1548 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 7672 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1508-1548_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.925241Jy sigma=0.008222 ! Fit after self-cal, rms=0.902626Jy sigma=0.008101 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.409 mas, bmaj=10.31 mas, bpa=18.05 degrees ! Estimated noise=1153.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0765266 Jy ! Component: 100 - total flux cleaned = 0.0973449 Jy ! Total flux subtracted in 100 components = 0.0973449 Jy ! Clean residual min=-0.005535 max=0.008353 Jy/beam ! Clean residual mean=0.000031 rms=0.001737 Jy/beam ! Combined flux in latest and established models = 0.0973449 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0973449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108760Jy sigma=0.000800 ! Fit after self-cal, rms=0.108718Jy sigma=0.000799 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.291 mas, bmaj=11.89 mas, bpa=18.38 degrees ! Estimated noise=925.058 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013215 Jy ! Component: 100 - total flux cleaned = 0.0198468 Jy ! Component: 150 - total flux cleaned = 0.0237045 Jy ! Component: 200 - total flux cleaned = 0.0261094 Jy ! Total flux subtracted in 200 components = 0.0261094 Jy ! Clean residual min=-0.003690 max=0.004865 Jy/beam ! Clean residual mean=0.000022 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.123454 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 38 components and 0.123454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107136Jy sigma=0.000783 ! Fit after self-cal, rms=0.107085Jy sigma=0.000782 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.83 HN 1.02 KP 1.03 ! LA 1.06 MK 1.00* NL 0.88 OV 0.94 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.15 KP 0.97 ! LA 1.08 MK 1.00* NL 0.95 OV 1.01 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.23 HN 1.09 KP 0.91 ! LA 0.81 MK 1.00* NL 1.01 OV 0.96 ! PT 0.97 SC 1.09 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.09 HN 1.19 KP 0.89 ! LA 0.76 MK 1.00* NL 1.09 OV 1.02 ! PT 1.02 SC 0.90 ! ! ! Fit before self-cal, rms=0.107085Jy sigma=0.000782 ! Fit after self-cal, rms=0.104484Jy sigma=0.000773 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.298 mas, bmaj=12.05 mas, bpa=18.84 degrees ! Estimated noise=915.106 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00198433 Jy ! Component: 100 - total flux cleaned = -0.00244477 Jy ! Component: 150 - total flux cleaned = -0.00244532 Jy ! Component: 200 - total flux cleaned = -0.00244582 Jy ! Total flux subtracted in 200 components = -0.00244582 Jy ! Clean residual min=-0.003205 max=0.003587 Jy/beam ! Clean residual mean=0.000014 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.121009 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.121009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104436Jy sigma=0.000772 ! Fit after self-cal, rms=0.104466Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104466Jy sigma=0.000772 ! Fit after self-cal, rms=0.123498Jy sigma=0.000767 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.302 mas, bmaj=12.06 mas, bpa=17.97 degrees ! Estimated noise=916.308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.83613e-05 Jy ! Component: 100 - total flux cleaned = -0.000133739 Jy ! Component: 150 - total flux cleaned = -0.000188708 Jy ! Component: 200 - total flux cleaned = -0.000187563 Jy ! Total flux subtracted in 200 components = -0.000187563 Jy ! Clean residual min=-0.002954 max=0.002632 Jy/beam ! Clean residual mean=0.000005 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.120821 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.120821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123473Jy sigma=0.000767 ! Fit after self-cal, rms=0.123762Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.30353e-05 Jy ! Component: 100 - total flux cleaned = 3.08474e-05 Jy ! Component: 150 - total flux cleaned = 1.05468e-05 Jy ! Component: 200 - total flux cleaned = 1.03303e-05 Jy ! Total flux subtracted in 200 components = 1.03303e-05 Jy ! Clean residual min=-0.002985 max=0.002653 Jy/beam ! Clean residual mean=0.000005 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.120831 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 69 components and 0.120831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123744Jy sigma=0.000766 ! Fit after self-cal, rms=0.123743Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123743Jy sigma=0.000766 ! Fit after self-cal, rms=0.126720Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.3 mas, bmaj=12.1 mas, bpa=17.91 degrees ! Estimated noise=915.523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101386 Jy ! Component: 100 - total flux cleaned = -0.00017629 Jy ! Component: 150 - total flux cleaned = -0.000217171 Jy ! Component: 200 - total flux cleaned = -0.000273128 Jy ! Total flux subtracted in 200 components = -0.000273128 Jy ! Clean residual min=-0.002937 max=0.002672 Jy/beam ! Clean residual mean=0.000005 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.120558 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 0.120558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126700Jy sigma=0.000766 ! Fit after self-cal, rms=0.126729Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.22279e-05 Jy ! Component: 100 - total flux cleaned = -1.30772e-05 Jy ! Component: 150 - total flux cleaned = 1.97356e-05 Jy ! Component: 200 - total flux cleaned = 4.5345e-06 Jy ! Total flux subtracted in 200 components = 4.5345e-06 Jy ! Clean residual min=-0.002917 max=0.002654 Jy/beam ! Clean residual mean=0.000005 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.120563 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 75 components and 0.120563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126715Jy sigma=0.000766 ! Fit after self-cal, rms=0.126716Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126716Jy sigma=0.000766 ! Fit after self-cal, rms=0.128174Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.512 mas, bmaj=16.83 mas, bpa=12.19 degrees ! Estimated noise=1012.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.21295e-05 Jy ! Component: 100 - total flux cleaned = -5.52017e-05 Jy ! Component: 150 - total flux cleaned = -5.52114e-05 Jy ! Component: 200 - total flux cleaned = -5.57066e-05 Jy ! Total flux subtracted in 200 components = -5.57066e-05 Jy ! Clean residual min=-0.003166 max=0.002821 Jy/beam ! Clean residual mean=0.000008 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.120507 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 82 components and 0.120507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128161Jy sigma=0.000766 ! Fit after self-cal, rms=0.128169Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.04357e-05 Jy ! Component: 100 - total flux cleaned = 6.32227e-06 Jy ! Component: 150 - total flux cleaned = -2.6784e-06 Jy ! Component: 200 - total flux cleaned = 4.90687e-06 Jy ! Total flux subtracted in 200 components = 4.90687e-06 Jy ! Clean residual min=-0.003154 max=0.002827 Jy/beam ! Clean residual mean=0.000008 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.120512 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 88 components and 0.120512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128160Jy sigma=0.000766 ! Fit after self-cal, rms=0.128157Jy sigma=0.000766 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.3 mas, bmaj=12.14 mas, bpa=17.83 degrees ! Estimated noise=915.005 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.3 x 12.14 at 17.83 degrees (North through East) ! Clean map min=-0.0028579 max=0.10106 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=10.48 mas, bpa=17.57 degrees ! Estimated noise=1151.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0759689 Jy ! Component: 100 - total flux cleaned = 0.0974045 Jy ! Component: 150 - total flux cleaned = 0.106486 Jy ! Component: 200 - total flux cleaned = 0.111513 Jy ! Total flux subtracted in 200 components = 0.111513 Jy ! Clean residual min=-0.004005 max=0.004174 Jy/beam ! Clean residual mean=0.000007 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.111513 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.111513 Jy ! Inverting map and beam ! Estimated beam: bmin=4.3 mas, bmaj=12.14 mas, bpa=17.83 degrees ! Estimated noise=915.005 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00456235 Jy ! Component: 100 - total flux cleaned = 0.00692317 Jy ! Component: 150 - total flux cleaned = 0.0075784 Jy ! Component: 200 - total flux cleaned = 0.00780022 Jy ! Total flux subtracted in 200 components = 0.00780022 Jy ! Clean residual min=-0.002941 max=0.002457 Jy/beam ! Clean residual mean=0.000007 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.119313 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 44 components and 0.119313 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.512 mas, bmaj=16.83 mas, bpa=12.19 degrees ! Estimated noise=1012.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000763419 Jy ! Component: 100 - total flux cleaned = 0.000881016 Jy ! Component: 150 - total flux cleaned = 0.000918854 Jy ! Component: 200 - total flux cleaned = 0.000966513 Jy ! Total flux subtracted in 200 components = 0.000966513 Jy ! Clean residual min=-0.003194 max=0.002781 Jy/beam ! Clean residual mean=0.000009 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.120279 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.38033e-05 Jy ! Component: 100 - total flux cleaned = 1.37923e-05 Jy ! Component: 150 - total flux cleaned = 1.90345e-06 Jy ! Component: 200 - total flux cleaned = 2.41966e-06 Jy ! Total flux subtracted in 200 components = 2.41966e-06 Jy ! Clean residual min=-0.003176 max=0.002800 Jy/beam ! Clean residual mean=0.000009 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.120282 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 58 components and 0.120282 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.3 mas, bmaj=12.14 mas, bpa=17.83 degrees ! Estimated noise=915.005 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000207405 Jy ! Component: 100 - total flux cleaned = -0.000372419 Jy ! Component: 150 - total flux cleaned = -0.00045277 Jy ! Component: 200 - total flux cleaned = -0.000488491 Jy ! Total flux subtracted in 200 components = -0.000488491 Jy ! Clean residual min=-0.002841 max=0.002553 Jy/beam ! Clean residual mean=0.000006 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.119793 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 0.119793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128191Jy sigma=0.000766 ! Fit after self-cal, rms=0.128235Jy sigma=0.000766 wmodel J1508-1548_S_2014_08_05_pus_map.mod ! Writing 71 model components to file: J1508-1548_S_2014_08_05_pus_map.mod wobs J1508-1548_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1508-1548_S_2014_08_05_pus_uvs.fits wwins J1508-1548_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J1508-1548_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000748919 Jy ! Component: 100 - total flux cleaned = -0.000567729 Jy ! Component: 150 - total flux cleaned = -0.000611385 Jy ! Component: 200 - total flux cleaned = -0.000611011 Jy ! Component: 250 - total flux cleaned = -0.000413743 Jy ! Component: 300 - total flux cleaned = -0.000414527 Jy ! Component: 350 - total flux cleaned = -0.000340085 Jy ! Component: 400 - total flux cleaned = -0.00026827 Jy ! Component: 450 - total flux cleaned = -0.000233273 Jy ! Component: 500 - total flux cleaned = -0.000232631 Jy ! Component: 550 - total flux cleaned = -0.000165995 Jy ! Component: 600 - total flux cleaned = -6.82642e-05 Jy ! Component: 650 - total flux cleaned = 2.72647e-05 Jy ! Component: 700 - total flux cleaned = 0.000182329 Jy ! Component: 750 - total flux cleaned = 0.000425676 Jy ! Component: 800 - total flux cleaned = 0.000574872 Jy ! Component: 850 - total flux cleaned = 0.000809948 Jy ! Component: 900 - total flux cleaned = 0.0010128 Jy ! Component: 950 - total flux cleaned = 0.00112673 Jy ! Component: 1000 - total flux cleaned = 0.00126717 Jy ! Component: 1050 - total flux cleaned = 0.00126705 Jy ! Component: 1100 - total flux cleaned = 0.00134893 Jy ! Component: 1150 - total flux cleaned = 0.00124068 Jy ! Component: 1200 - total flux cleaned = 0.00132046 Jy ! Component: 1250 - total flux cleaned = 0.00134679 Jy ! Component: 1300 - total flux cleaned = 0.00134651 Jy ! Component: 1350 - total flux cleaned = 0.00132055 Jy ! Component: 1400 - total flux cleaned = 0.00129471 Jy ! Component: 1450 - total flux cleaned = 0.00126927 Jy ! Component: 1500 - total flux cleaned = 0.00121949 Jy ! Component: 1550 - total flux cleaned = 0.00116968 Jy ! Component: 1600 - total flux cleaned = 0.00117021 Jy ! Component: 1650 - total flux cleaned = 0.00121893 Jy ! Component: 1700 - total flux cleaned = 0.00114625 Jy ! Component: 1750 - total flux cleaned = 0.00119422 Jy ! Component: 1800 - total flux cleaned = 0.00109908 Jy ! Component: 1850 - total flux cleaned = 0.00109896 Jy ! Component: 1900 - total flux cleaned = 0.00102935 Jy ! Component: 1950 - total flux cleaned = 0.000983576 Jy ! Component: 2000 - total flux cleaned = 0.00102959 Jy ! Component: 2050 - total flux cleaned = 0.000961402 Jy ! Component: 2100 - total flux cleaned = 0.000893819 Jy ! Component: 2150 - total flux cleaned = 0.000916367 Jy ! Component: 2200 - total flux cleaned = 0.000960784 Jy ! Component: 2250 - total flux cleaned = 0.000872861 Jy ! Component: 2300 - total flux cleaned = 0.000851211 Jy ! Component: 2350 - total flux cleaned = 0.00069994 Jy ! Component: 2400 - total flux cleaned = 0.000721624 Jy ! Component: 2450 - total flux cleaned = 0.00070035 Jy ! Component: 2500 - total flux cleaned = 0.000594934 Jy ! Component: 2550 - total flux cleaned = 0.000657566 Jy ! Component: 2600 - total flux cleaned = 0.000553584 Jy ! Component: 2650 - total flux cleaned = 0.000512441 Jy ! Component: 2700 - total flux cleaned = 0.000491925 Jy ! Component: 2750 - total flux cleaned = 0.000471616 Jy ! Component: 2800 - total flux cleaned = 0.000431144 Jy ! Component: 2850 - total flux cleaned = 0.00039125 Jy ! Component: 2900 - total flux cleaned = 0.000371187 Jy ! Component: 2950 - total flux cleaned = 0.000371109 Jy ! Component: 3000 - total flux cleaned = 0.000371018 Jy ! Component: 3050 - total flux cleaned = 0.00027375 Jy ! Component: 3100 - total flux cleaned = 0.000331728 Jy ! Component: 3150 - total flux cleaned = 0.000312628 Jy ! Component: 3200 - total flux cleaned = 0.000274239 Jy ! Component: 3250 - total flux cleaned = 0.000255508 Jy ! Component: 3300 - total flux cleaned = 0.000236655 Jy ! Component: 3350 - total flux cleaned = 0.000292873 Jy ! Component: 3400 - total flux cleaned = 0.000311394 Jy ! Component: 3450 - total flux cleaned = 0.000329923 Jy ! Component: 3500 - total flux cleaned = 0.000348127 Jy ! Component: 3550 - total flux cleaned = 0.000384624 Jy ! Component: 3600 - total flux cleaned = 0.000348155 Jy ! Component: 3650 - total flux cleaned = 0.0003845 Jy ! Component: 3700 - total flux cleaned = 0.000330668 Jy ! Component: 3750 - total flux cleaned = 0.000366344 Jy ! Component: 3800 - total flux cleaned = 0.000330755 Jy ! Component: 3850 - total flux cleaned = 0.000418955 Jy ! Component: 3900 - total flux cleaned = 0.00033108 Jy ! Component: 3950 - total flux cleaned = 0.000366105 Jy ! Component: 4000 - total flux cleaned = 0.000331389 Jy ! Component: 4050 - total flux cleaned = 0.000348677 Jy ! Total flux subtracted in 4096 components = 0.000382883 Jy ! Clean residual min=-0.000905 max=0.001070 Jy/beam ! Clean residual mean=0.000001 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.120176 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 349 components and 0.120176 Jy ![Exited script file: muppet] wmap "J1508-1548_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.3 x 12.14 at 17.83 degrees (North through East) ! Clean map min=-0.002743 max=0.10063 Jy/beam ! Writing clean map to FITS file: J1508-1548_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.100632 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000333549 device "J1508-1548_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1508-1548_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.994366 0.994366 1.98873 3.97746 7.95493 15.9099 31.8197 63.6394 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.1 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.3 x 12.14 at 17.83 degrees (North through East) ! Clean map min=-0.002743 max=0.10063 Jy/beam quit ! Quitting program ! Log file J1508-1548_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:31:08 2016