! Started logfile: J1502-1508_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:30:57 2016
obs J1502-1508_S_2014_08_05_pus_uva.fits
! Reading UV FITS file: J1502-1508_S_2014_08_05_pus_uva.fits
! AN table 1: 93 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.515651 visibilities/baseline/integration-bin.
! Found source: J1502-1508
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 360 lines of history.
! 
! Reading 8632 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1502-1508_S_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 264 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 264 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 264 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 264 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.910719Jy  sigma=0.008742
! Fit after  self-cal, rms=0.870611Jy  sigma=0.008374
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.562 mas, bmaj=12.44 mas, bpa=15.25 degrees
! Estimated noise=1185.48 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0985949 Jy
! Component: 100  -  total flux cleaned = 0.120192 Jy
! Total flux subtracted in 100 components = 0.120192 Jy
! Clean residual min=-0.005344 max=0.006710 Jy/beam
! Clean residual mean=0.000025 rms=0.001496 Jy/beam
! Combined flux in latest and established models = 0.120192 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.120192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094063Jy  sigma=0.000770
! Fit after  self-cal, rms=0.094060Jy  sigma=0.000770
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.521 mas, bmaj=13.57 mas, bpa=14.23 degrees
! Estimated noise=811.418 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00942138 Jy
! Component: 100  -  total flux cleaned = 0.0137829 Jy
! Component: 150  -  total flux cleaned = 0.0163627 Jy
! Component: 200  -  total flux cleaned = 0.0180166 Jy
! Total flux subtracted in 200 components = 0.0180166 Jy
! Clean residual min=-0.003914 max=0.003856 Jy/beam
! Clean residual mean=0.000001 rms=0.001063 Jy/beam
! Combined flux in latest and established models = 0.138208 Jy
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 79 components and 0.138208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092577Jy  sigma=0.000764
! Fit after  self-cal, rms=0.092574Jy  sigma=0.000764
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.88     HN        0.98     KP        1.05     
!   LA        1.13     MK        1.00*    NL        0.89     OV        1.03     
!   PT        1.06     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.10     HN        1.06     KP        1.00     
!   LA        1.10     MK        1.00*    NL        0.87     OV        1.01     
!   PT        1.02     SC        1.08     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.23     HN        1.07     KP        0.92     
!   LA        0.84     MK        1.00*    NL        1.02     OV        0.95     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        1.00     KP        0.89     
!   LA        0.84     MK        1.00*    NL        1.09     OV        0.99     
!   PT        1.03     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.092574Jy  sigma=0.000764
! Fit after  self-cal, rms=0.087928Jy  sigma=0.000752
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.519 mas, bmaj=13.62 mas, bpa=14.39 degrees
! Estimated noise=815.913 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128213 Jy
! Component: 100  -  total flux cleaned = 0.0019659 Jy
! Component: 150  -  total flux cleaned = 0.00220674 Jy
! Component: 200  -  total flux cleaned = 0.00231791 Jy
! Total flux subtracted in 200 components = 0.00231791 Jy
! Clean residual min=-0.003546 max=0.002951 Jy/beam
! Clean residual mean=0.000003 rms=0.000854 Jy/beam
! Combined flux in latest and established models = 0.140526 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 95 components and 0.140526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087874Jy  sigma=0.000752
! Fit after  self-cal, rms=0.087840Jy  sigma=0.000751
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087840Jy  sigma=0.000751
! Fit after  self-cal, rms=0.082639Jy  sigma=0.000746
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.515 mas, bmaj=13.64 mas, bpa=14.39 degrees
! Estimated noise=816.246 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.58385e-05 Jy
! Component: 100  -  total flux cleaned = -2.70149e-05 Jy
! Component: 150  -  total flux cleaned = -1.14508e-05 Jy
! Component: 200  -  total flux cleaned = 2.80257e-05 Jy
! Total flux subtracted in 200 components = 2.80257e-05 Jy
! Clean residual min=-0.002112 max=0.002809 Jy/beam
! Clean residual mean=0.000005 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.140554 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 107 components and 0.140554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082631Jy  sigma=0.000746
! Fit after  self-cal, rms=0.082588Jy  sigma=0.000746
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-52, -4.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218816 Jy
! Component: 100  -  total flux cleaned = 0.0022808 Jy
! Component: 150  -  total flux cleaned = 0.00264517 Jy
! Component: 200  -  total flux cleaned = 0.00300793 Jy
! Total flux subtracted in 200 components = 0.00300793 Jy
! Clean residual min=-0.001980 max=0.002020 Jy/beam
! Clean residual mean=0.000004 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.143562 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 133 components and 0.143562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082511Jy  sigma=0.000746
! Fit after  self-cal, rms=0.082507Jy  sigma=0.000746
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082507Jy  sigma=0.000746
! Fit after  self-cal, rms=0.082714Jy  sigma=0.000746
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.511 mas, bmaj=13.64 mas, bpa=14.42 degrees
! Estimated noise=816.723 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000290744 Jy
! Component: 100  -  total flux cleaned = 0.000607038 Jy
! Component: 150  -  total flux cleaned = 0.000959046 Jy
! Component: 200  -  total flux cleaned = 0.00126891 Jy
! Total flux subtracted in 200 components = 0.00126891 Jy
! Clean residual min=-0.002027 max=0.002018 Jy/beam
! Clean residual mean=0.000002 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.144831 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 147 components and 0.144831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082695Jy  sigma=0.000745
! Fit after  self-cal, rms=0.082699Jy  sigma=0.000745
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000187688 Jy
! Component: 100  -  total flux cleaned = 0.000438382 Jy
! Component: 150  -  total flux cleaned = 0.000645575 Jy
! Component: 200  -  total flux cleaned = 0.000724495 Jy
! Total flux subtracted in 200 components = 0.000724495 Jy
! Clean residual min=-0.002021 max=0.002011 Jy/beam
! Clean residual mean=0.000002 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.145556 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 159 components and 0.145556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082691Jy  sigma=0.000745
! Fit after  self-cal, rms=0.082690Jy  sigma=0.000745
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082690Jy  sigma=0.000745
! Fit after  self-cal, rms=0.082876Jy  sigma=0.000745
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.43 mas, bmaj=17.1 mas, bpa=13.01 degrees
! Estimated noise=922.279 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000288824 Jy
! Component: 100  -  total flux cleaned = 0.000491123 Jy
! Component: 150  -  total flux cleaned = 0.000607381 Jy
! Component: 200  -  total flux cleaned = 0.000696199 Jy
! Total flux subtracted in 200 components = 0.000696199 Jy
! Clean residual min=-0.002180 max=0.002059 Jy/beam
! Clean residual mean=0.000000 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.146252 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 189 components and 0.146252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082873Jy  sigma=0.000745
! Fit after  self-cal, rms=0.082872Jy  sigma=0.000745
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.55032e-05 Jy
! Component: 100  -  total flux cleaned = 0.000106661 Jy
! Component: 150  -  total flux cleaned = 0.000154095 Jy
! Component: 200  -  total flux cleaned = 0.000207964 Jy
! Total flux subtracted in 200 components = 0.000207964 Jy
! Clean residual min=-0.002128 max=0.002024 Jy/beam
! Clean residual mean=-0.000000 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.14646 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 199 components and 0.14646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082874Jy  sigma=0.000745
! Fit after  self-cal, rms=0.082874Jy  sigma=0.000745
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.508 mas, bmaj=13.64 mas, bpa=14.44 degrees
! Estimated noise=818.547 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.508 x 13.64 at 14.44 degrees (North through East)
! Clean map  min=-0.0019017  max=0.12961 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.549 mas, bmaj=12.48 mas, bpa=15.46 degrees
! Estimated noise=1194.24 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0992479 Jy
! Component: 100  -  total flux cleaned = 0.121159 Jy
! Component: 150  -  total flux cleaned = 0.128065 Jy
! Component: 200  -  total flux cleaned = 0.131266 Jy
! Total flux subtracted in 200 components = 0.131266 Jy
! Clean residual min=-0.003400 max=0.003132 Jy/beam
! Clean residual mean=0.000013 rms=0.000961 Jy/beam
! Combined flux in latest and established models = 0.131266 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 41 model components to the UV plane model.
! The established model now contains 41 components and 0.131266 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.508 mas, bmaj=13.64 mas, bpa=14.44 degrees
! Estimated noise=818.547 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00431941 Jy
! Component: 100  -  total flux cleaned = 0.00649565 Jy
! Component: 150  -  total flux cleaned = 0.00779336 Jy
! Component: 200  -  total flux cleaned = 0.0087512 Jy
! Total flux subtracted in 200 components = 0.0087512 Jy
! Clean residual min=-0.002100 max=0.002172 Jy/beam
! Clean residual mean=0.000009 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.140017 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 81 components and 0.140017 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.43 mas, bmaj=17.1 mas, bpa=13.01 degrees
! Estimated noise=922.279 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146138 Jy
! Component: 100  -  total flux cleaned = 0.00249717 Jy
! Component: 150  -  total flux cleaned = 0.0033214 Jy
! Component: 200  -  total flux cleaned = 0.00400581 Jy
! Total flux subtracted in 200 components = 0.00400581 Jy
! Clean residual min=-0.002259 max=0.002105 Jy/beam
! Clean residual mean=0.000004 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.144023 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000587815 Jy
! Component: 100  -  total flux cleaned = 0.00103682 Jy
! Component: 150  -  total flux cleaned = 0.00129076 Jy
! Component: 200  -  total flux cleaned = 0.0014395 Jy
! Total flux subtracted in 200 components = 0.0014395 Jy
! Clean residual min=-0.002247 max=0.002062 Jy/beam
! Clean residual mean=0.000001 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.145462 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 158 components and 0.145462 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.508 mas, bmaj=13.64 mas, bpa=14.44 degrees
! Estimated noise=818.547 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.42101e-05 Jy
! Component: 100  -  total flux cleaned = 0.000313532 Jy
! Component: 150  -  total flux cleaned = 0.000540564 Jy
! Component: 200  -  total flux cleaned = 0.000631242 Jy
! Total flux subtracted in 200 components = 0.000631242 Jy
! Clean residual min=-0.002108 max=0.001970 Jy/beam
! Clean residual mean=0.000001 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.146094 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 177 components and 0.146094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082876Jy  sigma=0.000745
! Fit after  self-cal, rms=0.082876Jy  sigma=0.000745
wmodel J1502-1508_S_2014_08_05_pus_map.mod
! Writing 177 model components to file: J1502-1508_S_2014_08_05_pus_map.mod
wobs J1502-1508_S_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J1502-1508_S_2014_08_05_pus_uvs.fits
wwins J1502-1508_S_2014_08_05_pus_map.win
! wwins: Wrote 2 windows to J1502-1508_S_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000290203 Jy
! Component: 100  -  total flux cleaned = -0.000513275 Jy
! Component: 150  -  total flux cleaned = -0.000603212 Jy
! Component: 200  -  total flux cleaned = -0.000659531 Jy
! Component: 250  -  total flux cleaned = -0.000604773 Jy
! Component: 300  -  total flux cleaned = -0.000501941 Jy
! Component: 350  -  total flux cleaned = -0.000403392 Jy
! Component: 400  -  total flux cleaned = -0.000261545 Jy
! Component: 450  -  total flux cleaned = -0.000215473 Jy
! Component: 500  -  total flux cleaned = -8.06135e-05 Jy
! Component: 550  -  total flux cleaned = -3.68415e-05 Jy
! Component: 600  -  total flux cleaned = 6.99113e-05 Jy
! Component: 650  -  total flux cleaned = 9.11712e-05 Jy
! Component: 700  -  total flux cleaned = 0.000172839 Jy
! Component: 750  -  total flux cleaned = 0.000192937 Jy
! Component: 800  -  total flux cleaned = 0.000270735 Jy
! Component: 850  -  total flux cleaned = 0.000251907 Jy
! Component: 900  -  total flux cleaned = 0.000308292 Jy
! Component: 950  -  total flux cleaned = 0.000363441 Jy
! Component: 1000  -  total flux cleaned = 0.000417191 Jy
! Component: 1050  -  total flux cleaned = 0.000469703 Jy
! Component: 1100  -  total flux cleaned = 0.000469731 Jy
! Component: 1150  -  total flux cleaned = 0.000520918 Jy
! Component: 1200  -  total flux cleaned = 0.000554528 Jy
! Component: 1250  -  total flux cleaned = 0.000554636 Jy
! Component: 1300  -  total flux cleaned = 0.000619731 Jy
! Component: 1350  -  total flux cleaned = 0.000635578 Jy
! Component: 1400  -  total flux cleaned = 0.000698328 Jy
! Component: 1450  -  total flux cleaned = 0.0007139 Jy
! Component: 1500  -  total flux cleaned = 0.000760007 Jy
! Component: 1550  -  total flux cleaned = 0.000805282 Jy
! Component: 1600  -  total flux cleaned = 0.000834966 Jy
! Component: 1650  -  total flux cleaned = 0.000893861 Jy
! Component: 1700  -  total flux cleaned = 0.00092293 Jy
! Component: 1750  -  total flux cleaned = 0.000951557 Jy
! Component: 1800  -  total flux cleaned = 0.000923341 Jy
! Component: 1850  -  total flux cleaned = 0.000923451 Jy
! Component: 1900  -  total flux cleaned = 0.000951217 Jy
! Component: 1950  -  total flux cleaned = 0.000951205 Jy
! Component: 2000  -  total flux cleaned = 0.000978215 Jy
! Component: 2050  -  total flux cleaned = 0.000951355 Jy
! Component: 2100  -  total flux cleaned = 0.000938003 Jy
! Component: 2150  -  total flux cleaned = 0.000950992 Jy
! Component: 2200  -  total flux cleaned = 0.000938105 Jy
! Component: 2250  -  total flux cleaned = 0.000976537 Jy
! Component: 2300  -  total flux cleaned = 0.000976552 Jy
! Component: 2350  -  total flux cleaned = 0.000951309 Jy
! Component: 2400  -  total flux cleaned = 0.000938865 Jy
! Component: 2450  -  total flux cleaned = 0.000914165 Jy
! Component: 2500  -  total flux cleaned = 0.00086531 Jy
! Component: 2550  -  total flux cleaned = 0.000889559 Jy
! Component: 2600  -  total flux cleaned = 0.00088953 Jy
! Component: 2650  -  total flux cleaned = 0.000865532 Jy
! Component: 2700  -  total flux cleaned = 0.000830054 Jy
! Component: 2750  -  total flux cleaned = 0.00080664 Jy
! Component: 2800  -  total flux cleaned = 0.000737011 Jy
! Component: 2850  -  total flux cleaned = 0.000725515 Jy
! Component: 2900  -  total flux cleaned = 0.000725517 Jy
! Component: 2950  -  total flux cleaned = 0.000668736 Jy
! Component: 3000  -  total flux cleaned = 0.000634916 Jy
! Component: 3050  -  total flux cleaned = 0.000590172 Jy
! Component: 3100  -  total flux cleaned = 0.000534748 Jy
! Component: 3150  -  total flux cleaned = 0.000512842 Jy
! Component: 3200  -  total flux cleaned = 0.000414764 Jy
! Component: 3250  -  total flux cleaned = 0.000403962 Jy
! Component: 3300  -  total flux cleaned = 0.000403782 Jy
! Component: 3350  -  total flux cleaned = 0.000318313 Jy
! Component: 3400  -  total flux cleaned = 0.000254698 Jy
! Component: 3450  -  total flux cleaned = 0.000212676 Jy
! Component: 3500  -  total flux cleaned = 0.000170867 Jy
! Component: 3550  -  total flux cleaned = 0.000150143 Jy
! Component: 3600  -  total flux cleaned = 6.74859e-05 Jy
! Component: 3650  -  total flux cleaned = 7.77312e-05 Jy
! Component: 3700  -  total flux cleaned = 2.67844e-05 Jy
! Component: 3750  -  total flux cleaned = -1.36646e-05 Jy
! Component: 3800  -  total flux cleaned = -3.38068e-05 Jy
! Component: 3850  -  total flux cleaned = -4.3847e-05 Jy
! Component: 3900  -  total flux cleaned = -5.37237e-05 Jy
! Component: 3950  -  total flux cleaned = -6.36264e-05 Jy
! Component: 4000  -  total flux cleaned = -7.3487e-05 Jy
! Component: 4050  -  total flux cleaned = -9.30792e-05 Jy
! Total flux subtracted in 4096 components = -0.000122246 Jy
! Clean residual min=-0.000612 max=0.000577 Jy/beam
! Clean residual mean=0.000000 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.145971 Jy
keep
! Adding 271 model components to the UV plane model.
! The established model now contains 448 components and 0.145972 Jy
![Exited script file: muppet]
wmap "J1502-1508_S_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.508 x 13.64 at 14.44 degrees (North through East)
! Clean map  min=-0.0015577  max=0.1296 Jy/beam
! Writing clean map to FITS file: J1502-1508_S_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.129599 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000186761 
device "J1502-1508_S_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J1502-1508_S_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.432319 0.432319 0.864639 1.72928 3.45856 6.91711 13.8342 27.6684 55.3369
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.129 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.508 x 13.64 at 14.44 degrees (North through East)
! Clean map  min=-0.0015577  max=0.1296 Jy/beam
quit
! Quitting program
! Log file J1502-1508_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:31:02 2016