! Started logfile: J1453-2522_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:30:29 2016 obs J1453-2522_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1453-2522_S_2014_08_05_pus_uva.fits ! AN table 1: 101 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.618922 visibilities/baseline/integration-bin. ! Found source: J1453-2522 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 11252 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1453-2522_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 302 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 302 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 302 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 302 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.884647Jy sigma=0.007582 ! Fit after self-cal, rms=0.860962Jy sigma=0.007423 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=13.84 mas, bpa=19.89 degrees ! Estimated noise=1134.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107832 Jy ! Component: 100 - total flux cleaned = 0.133443 Jy ! Total flux subtracted in 100 components = 0.133443 Jy ! Clean residual min=-0.006557 max=0.010979 Jy/beam ! Clean residual mean=-0.000033 rms=0.001882 Jy/beam ! Combined flux in latest and established models = 0.133443 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.133443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102088Jy sigma=0.000809 ! Fit after self-cal, rms=0.102075Jy sigma=0.000809 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.821 mas, bmaj=15.76 mas, bpa=18.65 degrees ! Estimated noise=788.133 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182334 Jy ! Component: 100 - total flux cleaned = 0.0277096 Jy ! Component: 150 - total flux cleaned = 0.0331919 Jy ! Component: 200 - total flux cleaned = 0.0365288 Jy ! Total flux subtracted in 200 components = 0.0365288 Jy ! Clean residual min=-0.004059 max=0.003936 Jy/beam ! Clean residual mean=-0.000008 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.169972 Jy ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 80 components and 0.169972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098848Jy sigma=0.000780 ! Fit after self-cal, rms=0.098839Jy sigma=0.000780 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.86 HN 1.11 KP 1.10 ! LA 1.11 MK 1.00* NL 0.90 OV 0.99 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.14 KP 1.04 ! LA 1.08 MK 1.00* NL 0.98 OV 1.04 ! PT 1.00 SC 1.09 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.14 HN 1.13 KP 0.92 ! LA 0.84 MK 1.00* NL 1.01 OV 0.94 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.06 KP 0.90 ! LA 0.79 MK 1.00* NL 1.04 OV 1.02 ! PT 1.02 SC 0.98 ! ! ! Fit before self-cal, rms=0.098839Jy sigma=0.000780 ! Fit after self-cal, rms=0.097403Jy sigma=0.000766 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=16.01 mas, bpa=18.86 degrees ! Estimated noise=786.771 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146429 Jy ! Component: 100 - total flux cleaned = -0.00164144 Jy ! Component: 150 - total flux cleaned = -0.0017553 Jy ! Component: 200 - total flux cleaned = -0.0017553 Jy ! Total flux subtracted in 200 components = -0.0017553 Jy ! Clean residual min=-0.002881 max=0.002499 Jy/beam ! Clean residual mean=-0.000005 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.168216 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 93 components and 0.168216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097355Jy sigma=0.000766 ! Fit after self-cal, rms=0.097349Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097349Jy sigma=0.000766 ! Fit after self-cal, rms=0.097735Jy sigma=0.000766 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.855 mas, bmaj=16.07 mas, bpa=18.9 degrees ! Estimated noise=785.468 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010853 Jy ! Component: 100 - total flux cleaned = -0.00115072 Jy ! Component: 150 - total flux cleaned = -0.00111904 Jy ! Component: 200 - total flux cleaned = -0.00112002 Jy ! Total flux subtracted in 200 components = -0.00112002 Jy ! Clean residual min=-0.002801 max=0.002481 Jy/beam ! Clean residual mean=-0.000005 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.167096 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 102 components and 0.167096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097706Jy sigma=0.000765 ! Fit after self-cal, rms=0.097713Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.74442e-05 Jy ! Component: 100 - total flux cleaned = -2.63381e-05 Jy ! Component: 150 - total flux cleaned = -3.37775e-07 Jy ! Component: 200 - total flux cleaned = 2.30768e-05 Jy ! Total flux subtracted in 200 components = 2.30768e-05 Jy ! Clean residual min=-0.002777 max=0.002520 Jy/beam ! Clean residual mean=-0.000005 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.167119 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 109 components and 0.167119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097699Jy sigma=0.000765 ! Fit after self-cal, rms=0.097697Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097697Jy sigma=0.000765 ! Fit after self-cal, rms=0.100255Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.856 mas, bmaj=16.01 mas, bpa=18.85 degrees ! Estimated noise=785.086 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000673167 Jy ! Component: 100 - total flux cleaned = -0.000727967 Jy ! Component: 150 - total flux cleaned = -0.000773111 Jy ! Component: 200 - total flux cleaned = -0.000773487 Jy ! Total flux subtracted in 200 components = -0.000773487 Jy ! Clean residual min=-0.002481 max=0.001912 Jy/beam ! Clean residual mean=-0.000008 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.166346 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 116 components and 0.166346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100240Jy sigma=0.000763 ! Fit after self-cal, rms=0.100283Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.07596e-05 Jy ! Component: 100 - total flux cleaned = 0.000114241 Jy ! Component: 150 - total flux cleaned = 0.000145457 Jy ! Component: 200 - total flux cleaned = 0.000159859 Jy ! Total flux subtracted in 200 components = 0.000159859 Jy ! Clean residual min=-0.002478 max=0.001928 Jy/beam ! Clean residual mean=-0.000007 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.166506 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 125 components and 0.166506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100278Jy sigma=0.000763 ! Fit after self-cal, rms=0.100277Jy sigma=0.000763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100277Jy sigma=0.000763 ! Fit after self-cal, rms=0.101001Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.075 mas, bmaj=22.18 mas, bpa=9.183 degrees ! Estimated noise=874.251 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114826 Jy ! Component: 100 - total flux cleaned = 0.000159644 Jy ! Component: 150 - total flux cleaned = 0.000184948 Jy ! Component: 200 - total flux cleaned = 0.000218017 Jy ! Total flux subtracted in 200 components = 0.000218017 Jy ! Clean residual min=-0.002521 max=0.001969 Jy/beam ! Clean residual mean=-0.000012 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.166724 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 133 components and 0.166724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101001Jy sigma=0.000763 ! Fit after self-cal, rms=0.101010Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.43498e-07 Jy ! Component: 100 - total flux cleaned = 3.02663e-05 Jy ! Component: 150 - total flux cleaned = 4.8015e-05 Jy ! Component: 200 - total flux cleaned = 6.46176e-05 Jy ! Total flux subtracted in 200 components = 6.46176e-05 Jy ! Clean residual min=-0.002512 max=0.001943 Jy/beam ! Clean residual mean=-0.000012 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.166788 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 136 components and 0.166788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101010Jy sigma=0.000763 ! Fit after self-cal, rms=0.101008Jy sigma=0.000763 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=16.05 mas, bpa=18.89 degrees ! Estimated noise=785.688 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.859 x 16.05 at 18.89 degrees (North through East) ! Clean map min=-0.0023439 max=0.13789 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=14.09 mas, bpa=20.16 degrees ! Estimated noise=1138.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107841 Jy ! Component: 100 - total flux cleaned = 0.13254 Jy ! Component: 150 - total flux cleaned = 0.143631 Jy ! Component: 200 - total flux cleaned = 0.150497 Jy ! Total flux subtracted in 200 components = 0.150497 Jy ! Clean residual min=-0.003238 max=0.003718 Jy/beam ! Clean residual mean=-0.000018 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.150497 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.150497 Jy ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=16.05 mas, bpa=18.89 degrees ! Estimated noise=785.688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00664419 Jy ! Component: 100 - total flux cleaned = 0.0102443 Jy ! Component: 150 - total flux cleaned = 0.0124119 Jy ! Component: 200 - total flux cleaned = 0.0138031 Jy ! Total flux subtracted in 200 components = 0.0138031 Jy ! Clean residual min=-0.002522 max=0.001977 Jy/beam ! Clean residual mean=-0.000011 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.1643 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 93 components and 0.1643 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.075 mas, bmaj=22.18 mas, bpa=9.183 degrees ! Estimated noise=874.251 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135128 Jy ! Component: 100 - total flux cleaned = 0.00207917 Jy ! Component: 150 - total flux cleaned = 0.00225686 Jy ! Component: 200 - total flux cleaned = 0.00234371 Jy ! Total flux subtracted in 200 components = 0.00234371 Jy ! Clean residual min=-0.002569 max=0.001899 Jy/beam ! Clean residual mean=-0.000013 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.166644 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.45744e-05 Jy ! Component: 100 - total flux cleaned = 0.000152503 Jy ! Component: 150 - total flux cleaned = 0.000219309 Jy ! Component: 200 - total flux cleaned = 0.000280914 Jy ! Total flux subtracted in 200 components = 0.000280914 Jy ! Clean residual min=-0.002543 max=0.001930 Jy/beam ! Clean residual mean=-0.000012 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.166925 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 101 components and 0.166925 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=16.05 mas, bpa=18.89 degrees ! Estimated noise=785.688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.06713e-05 Jy ! Component: 100 - total flux cleaned = -0.000125917 Jy ! Component: 150 - total flux cleaned = -0.000188595 Jy ! Component: 200 - total flux cleaned = -0.000207204 Jy ! Total flux subtracted in 200 components = -0.000207204 Jy ! Clean residual min=-0.002391 max=0.001980 Jy/beam ! Clean residual mean=-0.000006 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.166718 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 117 components and 0.166718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101000Jy sigma=0.000763 ! Fit after self-cal, rms=0.100992Jy sigma=0.000763 wmodel J1453-2522_S_2014_08_05_pus_map.mod ! Writing 117 model components to file: J1453-2522_S_2014_08_05_pus_map.mod wobs J1453-2522_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1453-2522_S_2014_08_05_pus_uvs.fits wwins J1453-2522_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J1453-2522_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101342 Jy ! Component: 100 - total flux cleaned = -0.00153896 Jy ! Component: 150 - total flux cleaned = -0.0019239 Jy ! Component: 200 - total flux cleaned = -0.00212149 Jy ! Component: 250 - total flux cleaned = -0.00230985 Jy ! Component: 300 - total flux cleaned = -0.00236926 Jy ! Component: 350 - total flux cleaned = -0.00242623 Jy ! Component: 400 - total flux cleaned = -0.00248184 Jy ! Component: 450 - total flux cleaned = -0.00250953 Jy ! Component: 500 - total flux cleaned = -0.002563 Jy ! Component: 550 - total flux cleaned = -0.00258943 Jy ! Component: 600 - total flux cleaned = -0.00263983 Jy ! Component: 650 - total flux cleaned = -0.00266454 Jy ! Component: 700 - total flux cleaned = -0.00273661 Jy ! Component: 750 - total flux cleaned = -0.00283014 Jy ! Component: 800 - total flux cleaned = -0.00285298 Jy ! Component: 850 - total flux cleaned = -0.00296612 Jy ! Component: 900 - total flux cleaned = -0.00305484 Jy ! Component: 950 - total flux cleaned = -0.00314223 Jy ! Component: 1000 - total flux cleaned = -0.00320685 Jy ! Component: 1050 - total flux cleaned = -0.00322808 Jy ! Component: 1100 - total flux cleaned = -0.00326989 Jy ! Component: 1150 - total flux cleaned = -0.00333155 Jy ! Component: 1200 - total flux cleaned = -0.00335205 Jy ! Component: 1250 - total flux cleaned = -0.00337203 Jy ! Component: 1300 - total flux cleaned = -0.00327347 Jy ! Component: 1350 - total flux cleaned = -0.00329315 Jy ! Component: 1400 - total flux cleaned = -0.00329285 Jy ! Component: 1450 - total flux cleaned = -0.00325455 Jy ! Component: 1500 - total flux cleaned = -0.00329195 Jy ! Component: 1550 - total flux cleaned = -0.0032734 Jy ! Component: 1600 - total flux cleaned = -0.00327287 Jy ! Component: 1650 - total flux cleaned = -0.00323646 Jy ! Component: 1700 - total flux cleaned = -0.00327217 Jy ! Component: 1750 - total flux cleaned = -0.00328999 Jy ! Component: 1800 - total flux cleaned = -0.00329015 Jy ! Component: 1850 - total flux cleaned = -0.00330733 Jy ! Component: 1900 - total flux cleaned = -0.00330715 Jy ! Component: 1950 - total flux cleaned = -0.00330699 Jy ! Component: 2000 - total flux cleaned = -0.00334085 Jy ! Component: 2050 - total flux cleaned = -0.00332402 Jy ! Component: 2100 - total flux cleaned = -0.00329085 Jy ! Component: 2150 - total flux cleaned = -0.00330728 Jy ! Component: 2200 - total flux cleaned = -0.00335598 Jy ! Component: 2250 - total flux cleaned = -0.0033399 Jy ! Component: 2300 - total flux cleaned = -0.00338786 Jy ! Component: 2350 - total flux cleaned = -0.00335595 Jy ! Component: 2400 - total flux cleaned = -0.00337168 Jy ! Component: 2450 - total flux cleaned = -0.00337169 Jy ! Component: 2500 - total flux cleaned = -0.00335617 Jy ! Component: 2550 - total flux cleaned = -0.00332551 Jy ! Component: 2600 - total flux cleaned = -0.00332564 Jy ! Component: 2650 - total flux cleaned = -0.00332579 Jy ! Component: 2700 - total flux cleaned = -0.00328101 Jy ! Component: 2750 - total flux cleaned = -0.00323648 Jy ! Component: 2800 - total flux cleaned = -0.00319218 Jy ! Component: 2850 - total flux cleaned = -0.00313377 Jy ! Component: 2900 - total flux cleaned = -0.00313382 Jy ! Component: 2950 - total flux cleaned = -0.00313369 Jy ! Component: 3000 - total flux cleaned = -0.00306204 Jy ! Component: 3050 - total flux cleaned = -0.00306198 Jy ! Component: 3100 - total flux cleaned = -0.00299138 Jy ! Component: 3150 - total flux cleaned = -0.00300538 Jy ! Component: 3200 - total flux cleaned = -0.00296357 Jy ! Component: 3250 - total flux cleaned = -0.0029083 Jy ! Component: 3300 - total flux cleaned = -0.00288072 Jy ! Component: 3350 - total flux cleaned = -0.00278515 Jy ! Component: 3400 - total flux cleaned = -0.00275802 Jy ! Component: 3450 - total flux cleaned = -0.00263678 Jy ! Component: 3500 - total flux cleaned = -0.00258327 Jy ! Component: 3550 - total flux cleaned = -0.00246347 Jy ! Component: 3600 - total flux cleaned = -0.00235787 Jy ! Component: 3650 - total flux cleaned = -0.002279 Jy ! Component: 3700 - total flux cleaned = -0.00217463 Jy ! Component: 3750 - total flux cleaned = -0.00216171 Jy ! Component: 3800 - total flux cleaned = -0.00209708 Jy ! Component: 3850 - total flux cleaned = -0.00202016 Jy ! Component: 3900 - total flux cleaned = -0.00190539 Jy ! Component: 3950 - total flux cleaned = -0.00187997 Jy ! Component: 4000 - total flux cleaned = -0.00181689 Jy ! Component: 4050 - total flux cleaned = -0.00175431 Jy ! Total flux subtracted in 4096 components = -0.00165468 Jy ! Clean residual min=-0.000788 max=0.000664 Jy/beam ! Clean residual mean=-0.000001 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.165063 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 392 components and 0.165063 Jy ![Exited script file: muppet] wmap "J1453-2522_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.859 x 16.05 at 18.89 degrees (North through East) ! Clean map min=-0.0024305 max=0.13866 Jy/beam ! Writing clean map to FITS file: J1453-2522_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.138656 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000247294 device "J1453-2522_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1453-2522_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.535054 0.535054 1.07011 2.14021 4.28043 8.56086 17.1217 34.2434 68.4869 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.138 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.859 x 16.05 at 18.89 degrees (North through East) ! Clean map min=-0.0024305 max=0.13866 Jy/beam quit ! Quitting program ! Log file J1453-2522_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:30:34 2016