! Started logfile: J1445-1629_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:30:18 2016 obs J1445-1629_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1445-1629_S_2014_08_05_pus_uva.fits ! AN table 1: 33 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.387879 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1445-1629 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 2304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1445-1629_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.709241Jy sigma=0.006941 ! Fit after self-cal, rms=0.704551Jy sigma=0.006898 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=11.25 mas, bpa=12.43 degrees ! Estimated noise=1823.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.223282 Jy ! Component: 100 - total flux cleaned = 0.279566 Jy ! Total flux subtracted in 100 components = 0.279566 Jy ! Clean residual min=-0.010136 max=0.022535 Jy/beam ! Clean residual mean=0.000058 rms=0.003802 Jy/beam ! Combined flux in latest and established models = 0.279566 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.279566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097266Jy sigma=0.000888 ! Fit after self-cal, rms=0.097276Jy sigma=0.000888 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024219 Jy ! Component: 100 - total flux cleaned = 0.0370632 Jy ! Total flux subtracted in 100 components = 0.0370632 Jy ! Clean residual min=-0.007999 max=0.008358 Jy/beam ! Clean residual mean=0.000028 rms=0.002246 Jy/beam ! Combined flux in latest and established models = 0.316629 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 25 components and 0.316629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088269Jy sigma=0.000806 ! Fit after self-cal, rms=0.088260Jy sigma=0.000806 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=11.56 mas, bpa=13.52 degrees ! Estimated noise=1526.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120913 Jy ! Component: 100 - total flux cleaned = 0.0186969 Jy ! Component: 150 - total flux cleaned = 0.0227635 Jy ! Component: 200 - total flux cleaned = 0.0254236 Jy ! Total flux subtracted in 200 components = 0.0254236 Jy ! Clean residual min=-0.006844 max=0.007414 Jy/beam ! Clean residual mean=0.000018 rms=0.001977 Jy/beam ! Combined flux in latest and established models = 0.342053 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 84 components and 0.342053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086170Jy sigma=0.000792 ! Fit after self-cal, rms=0.086161Jy sigma=0.000792 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.88 HN 1.00 KP 1.05 ! LA 1.09 MK 1.00* NL 1.00 OV 1.02 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.04 KP 0.97 ! LA 1.05 MK 1.00* NL 1.03 OV 1.04 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.17 HN 1.00 KP 0.89 ! LA 0.84 MK 1.00* NL 0.99 OV 0.98 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 1.00 KP 0.88 ! LA 0.82 MK 1.00* NL 1.09 OV 1.07 ! PT 1.03 SC 0.97 ! ! ! Fit before self-cal, rms=0.086161Jy sigma=0.000792 ! Fit after self-cal, rms=0.079391Jy sigma=0.000755 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.831 mas, bmaj=12.23 mas, bpa=11.76 degrees ! Estimated noise=1588.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150466 Jy ! Component: 100 - total flux cleaned = -0.00171645 Jy ! Component: 150 - total flux cleaned = -0.00171724 Jy ! Component: 200 - total flux cleaned = -0.00171581 Jy ! Total flux subtracted in 200 components = -0.00171581 Jy ! Clean residual min=-0.004493 max=0.005211 Jy/beam ! Clean residual mean=0.000009 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.340337 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 94 components and 0.340337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079353Jy sigma=0.000755 ! Fit after self-cal, rms=0.079339Jy sigma=0.000755 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079339Jy sigma=0.000755 ! Fit after self-cal, rms=0.079328Jy sigma=0.000755 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.836 mas, bmaj=12.25 mas, bpa=11.77 degrees ! Estimated noise=1588.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111287 Jy ! Component: 100 - total flux cleaned = -0.00128696 Jy ! Component: 150 - total flux cleaned = -0.00133481 Jy ! Component: 200 - total flux cleaned = -0.0013342 Jy ! Total flux subtracted in 200 components = -0.0013342 Jy ! Clean residual min=-0.004437 max=0.005139 Jy/beam ! Clean residual mean=0.000009 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.339003 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 98 components and 0.339003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079303Jy sigma=0.000754 ! Fit after self-cal, rms=0.079301Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.44132e-05 Jy ! Component: 100 - total flux cleaned = -3.23702e-05 Jy ! Component: 150 - total flux cleaned = -3.20735e-05 Jy ! Component: 200 - total flux cleaned = -5.0564e-05 Jy ! Total flux subtracted in 200 components = -5.0564e-05 Jy ! Clean residual min=-0.004368 max=0.005134 Jy/beam ! Clean residual mean=0.000009 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 0.338952 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 100 components and 0.338952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079291Jy sigma=0.000754 ! Fit after self-cal, rms=0.079290Jy sigma=0.000754 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079290Jy sigma=0.000754 ! Fit after self-cal, rms=0.079273Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.84 mas, bmaj=12.27 mas, bpa=11.77 degrees ! Estimated noise=1587.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000892752 Jy ! Component: 100 - total flux cleaned = -0.00107399 Jy ! Component: 150 - total flux cleaned = -0.0011483 Jy ! Component: 200 - total flux cleaned = -0.00114917 Jy ! Total flux subtracted in 200 components = -0.00114917 Jy ! Clean residual min=-0.004335 max=0.005068 Jy/beam ! Clean residual mean=0.000010 rms=0.001250 Jy/beam ! Combined flux in latest and established models = 0.337803 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 103 components and 0.337803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079258Jy sigma=0.000754 ! Fit after self-cal, rms=0.079258Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.2201e-05 Jy ! Component: 100 - total flux cleaned = -1.00531e-05 Jy ! Component: 150 - total flux cleaned = 4.88567e-06 Jy ! Component: 200 - total flux cleaned = 1.95202e-05 Jy ! Total flux subtracted in 200 components = 1.95202e-05 Jy ! Clean residual min=-0.004294 max=0.005068 Jy/beam ! Clean residual mean=0.000010 rms=0.001247 Jy/beam ! Combined flux in latest and established models = 0.337823 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 106 components and 0.337823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079252Jy sigma=0.000754 ! Fit after self-cal, rms=0.079251Jy sigma=0.000754 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079251Jy sigma=0.000754 ! Fit after self-cal, rms=0.079229Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.032 mas, bmaj=16.31 mas, bpa=0.826 degrees ! Estimated noise=1864.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150462 Jy ! Component: 100 - total flux cleaned = 0.000127955 Jy ! Component: 150 - total flux cleaned = 0.000128046 Jy ! Component: 200 - total flux cleaned = 0.000143028 Jy ! Total flux subtracted in 200 components = 0.000143028 Jy ! Clean residual min=-0.004972 max=0.006627 Jy/beam ! Clean residual mean=0.000016 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 0.337966 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 120 components and 0.337966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079230Jy sigma=0.000754 ! Fit after self-cal, rms=0.079226Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129533 Jy ! Component: 100 - total flux cleaned = 7.64327e-05 Jy ! Component: 150 - total flux cleaned = 9.1234e-05 Jy ! Component: 200 - total flux cleaned = 9.13116e-05 Jy ! Total flux subtracted in 200 components = 9.13116e-05 Jy ! Clean residual min=-0.004927 max=0.006601 Jy/beam ! Clean residual mean=0.000016 rms=0.001582 Jy/beam ! Combined flux in latest and established models = 0.338057 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 128 components and 0.338057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079233Jy sigma=0.000754 ! Fit after self-cal, rms=0.079230Jy sigma=0.000754 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=12.28 mas, bpa=11.77 degrees ! Estimated noise=1586.99 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.844 x 12.28 at 11.77 degrees (North through East) ! Clean map min=-0.004026 max=0.29228 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=11.3 mas, bpa=12.49 degrees ! Estimated noise=1861.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.222495 Jy ! Component: 100 - total flux cleaned = 0.278664 Jy ! Component: 150 - total flux cleaned = 0.302478 Jy ! Component: 200 - total flux cleaned = 0.314901 Jy ! Total flux subtracted in 200 components = 0.314901 Jy ! Clean residual min=-0.006813 max=0.006325 Jy/beam ! Clean residual mean=0.000026 rms=0.001675 Jy/beam ! Combined flux in latest and established models = 0.314901 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.314901 Jy ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=12.28 mas, bpa=11.77 degrees ! Estimated noise=1586.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104926 Jy ! Component: 100 - total flux cleaned = 0.0158216 Jy ! Component: 150 - total flux cleaned = 0.0187533 Jy ! Component: 200 - total flux cleaned = 0.0204312 Jy ! Total flux subtracted in 200 components = 0.0204312 Jy ! Clean residual min=-0.004685 max=0.005065 Jy/beam ! Clean residual mean=0.000012 rms=0.001271 Jy/beam ! Combined flux in latest and established models = 0.335333 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 46 components and 0.335332 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.032 mas, bmaj=16.31 mas, bpa=0.826 degrees ! Estimated noise=1864.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167184 Jy ! Component: 100 - total flux cleaned = 0.00221027 Jy ! Component: 150 - total flux cleaned = 0.00229636 Jy ! Component: 200 - total flux cleaned = 0.00237552 Jy ! Total flux subtracted in 200 components = 0.00237552 Jy ! Clean residual min=-0.005016 max=0.006714 Jy/beam ! Clean residual mean=0.000016 rms=0.001594 Jy/beam ! Combined flux in latest and established models = 0.337708 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.3253e-05 Jy ! Component: 100 - total flux cleaned = 0.000108524 Jy ! Component: 150 - total flux cleaned = 0.000141997 Jy ! Component: 200 - total flux cleaned = 0.000158136 Jy ! Total flux subtracted in 200 components = 0.000158136 Jy ! Clean residual min=-0.005004 max=0.006681 Jy/beam ! Clean residual mean=0.000016 rms=0.001589 Jy/beam ! Combined flux in latest and established models = 0.337866 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 66 components and 0.337866 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=12.28 mas, bpa=11.77 degrees ! Estimated noise=1586.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000936604 Jy ! Component: 100 - total flux cleaned = -0.000999872 Jy ! Component: 150 - total flux cleaned = -0.00104917 Jy ! Component: 200 - total flux cleaned = -0.00109527 Jy ! Total flux subtracted in 200 components = -0.00109527 Jy ! Clean residual min=-0.004459 max=0.005058 Jy/beam ! Clean residual mean=0.000010 rms=0.001250 Jy/beam ! Combined flux in latest and established models = 0.336771 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 81 components and 0.336771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079247Jy sigma=0.000754 ! Fit after self-cal, rms=0.079245Jy sigma=0.000754 wmodel J1445-1629_S_2014_08_05_pus_map.mod ! Writing 81 model components to file: J1445-1629_S_2014_08_05_pus_map.mod wobs J1445-1629_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1445-1629_S_2014_08_05_pus_uvs.fits wwins J1445-1629_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J1445-1629_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128603 Jy ! Component: 100 - total flux cleaned = 0.00159437 Jy ! Component: 150 - total flux cleaned = 0.00180584 Jy ! Component: 200 - total flux cleaned = 0.00174231 Jy ! Component: 250 - total flux cleaned = 0.00162119 Jy ! Component: 300 - total flux cleaned = 0.00139079 Jy ! Component: 350 - total flux cleaned = 0.00117013 Jy ! Component: 400 - total flux cleaned = 0.00100961 Jy ! Component: 450 - total flux cleaned = 0.000751927 Jy ! Component: 500 - total flux cleaned = 0.000553536 Jy ! Component: 550 - total flux cleaned = 0.000407301 Jy ! Component: 600 - total flux cleaned = 0.000174244 Jy ! Component: 650 - total flux cleaned = 0.000175192 Jy ! Component: 700 - total flux cleaned = 0.000130887 Jy ! Component: 750 - total flux cleaned = 8.9245e-05 Jy ! Component: 800 - total flux cleaned = 0.00017114 Jy ! Component: 850 - total flux cleaned = 4.96291e-05 Jy ! Component: 900 - total flux cleaned = 9.98528e-06 Jy ! Component: 950 - total flux cleaned = -6.6609e-05 Jy ! Component: 1000 - total flux cleaned = 7.97721e-06 Jy ! Component: 1050 - total flux cleaned = 0.000116605 Jy ! Component: 1100 - total flux cleaned = 0.000222404 Jy ! Component: 1150 - total flux cleaned = 0.000361438 Jy ! Component: 1200 - total flux cleaned = 0.000464084 Jy ! Component: 1250 - total flux cleaned = 0.000529962 Jy ! Component: 1300 - total flux cleaned = 0.000626709 Jy ! Component: 1350 - total flux cleaned = 0.000625935 Jy ! Component: 1400 - total flux cleaned = 0.000657409 Jy ! Component: 1450 - total flux cleaned = 0.000749503 Jy ! Component: 1500 - total flux cleaned = 0.000778813 Jy ! Component: 1550 - total flux cleaned = 0.00080828 Jy ! Component: 1600 - total flux cleaned = 0.000895263 Jy ! Component: 1650 - total flux cleaned = 0.000895365 Jy ! Component: 1700 - total flux cleaned = 0.000980143 Jy ! Component: 1750 - total flux cleaned = 0.00103572 Jy ! Component: 1800 - total flux cleaned = 0.0010908 Jy ! Component: 1850 - total flux cleaned = 0.00125198 Jy ! Component: 1900 - total flux cleaned = 0.00125256 Jy ! Component: 1950 - total flux cleaned = 0.00140895 Jy ! Component: 2000 - total flux cleaned = 0.00151161 Jy ! Component: 2050 - total flux cleaned = 0.00161178 Jy ! Component: 2100 - total flux cleaned = 0.00161149 Jy ! Component: 2150 - total flux cleaned = 0.00173456 Jy ! Component: 2200 - total flux cleaned = 0.00178324 Jy ! Component: 2250 - total flux cleaned = 0.00187878 Jy ! Component: 2300 - total flux cleaned = 0.00194938 Jy ! Component: 2350 - total flux cleaned = 0.00197271 Jy ! Component: 2400 - total flux cleaned = 0.00201869 Jy ! Component: 2450 - total flux cleaned = 0.00208672 Jy ! Component: 2500 - total flux cleaned = 0.00217597 Jy ! Component: 2550 - total flux cleaned = 0.00219785 Jy ! Component: 2600 - total flux cleaned = 0.00235032 Jy ! Component: 2650 - total flux cleaned = 0.00226393 Jy ! Component: 2700 - total flux cleaned = 0.00224244 Jy ! Component: 2750 - total flux cleaned = 0.0022004 Jy ! Component: 2800 - total flux cleaned = 0.00224264 Jy ! Component: 2850 - total flux cleaned = 0.00222193 Jy ! Component: 2900 - total flux cleaned = 0.00226273 Jy ! Component: 2950 - total flux cleaned = 0.00220208 Jy ! Component: 3000 - total flux cleaned = 0.00220181 Jy ! Component: 3050 - total flux cleaned = 0.00210262 Jy ! Component: 3100 - total flux cleaned = 0.00212224 Jy ! Component: 3150 - total flux cleaned = 0.00204499 Jy ! Component: 3200 - total flux cleaned = 0.00206438 Jy ! Component: 3250 - total flux cleaned = 0.00206446 Jy ! Component: 3300 - total flux cleaned = 0.00202659 Jy ! Component: 3350 - total flux cleaned = 0.00200782 Jy ! Component: 3400 - total flux cleaned = 0.0019892 Jy ! Component: 3450 - total flux cleaned = 0.00195237 Jy ! Component: 3500 - total flux cleaned = 0.00197077 Jy ! Component: 3550 - total flux cleaned = 0.0019527 Jy ! Component: 3600 - total flux cleaned = 0.00189849 Jy ! Component: 3650 - total flux cleaned = 0.00186258 Jy ! Component: 3700 - total flux cleaned = 0.00182689 Jy ! Component: 3750 - total flux cleaned = 0.00173797 Jy ! Component: 3800 - total flux cleaned = 0.00170254 Jy ! Component: 3850 - total flux cleaned = 0.00168503 Jy ! Component: 3900 - total flux cleaned = 0.00159703 Jy ! Component: 3950 - total flux cleaned = 0.00159712 Jy ! Component: 4000 - total flux cleaned = 0.0014748 Jy ! Component: 4050 - total flux cleaned = 0.00138765 Jy ! Total flux subtracted in 4096 components = 0.00131806 Jy ! Clean residual min=-0.000995 max=0.000943 Jy/beam ! Clean residual mean=0.000004 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.338089 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 387 components and 0.338089 Jy ![Exited script file: muppet] wmap "J1445-1629_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.844 x 12.28 at 11.77 degrees (North through East) ! Clean map min=-0.0023349 max=0.29248 Jy/beam ! Writing clean map to FITS file: J1445-1629_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.29248 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000310613 device "J1445-1629_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1445-1629_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.3186 0.3186 0.6372 1.2744 2.5488 5.0976 10.1952 20.3904 40.7808 81.5616 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.292 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.844 x 12.28 at 11.77 degrees (North through East) ! Clean map min=-0.0023349 max=0.29248 Jy/beam quit ! Quitting program ! Log file J1445-1629_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:30:23 2016