! Started logfile: J1254+0233_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:27:42 2016 obs J1254+0233_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1254+0233_S_2014_08_05_pus_uva.fits ! AN table 1: 102 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.784532 visibilities/baseline/integration-bin. ! Found source: J1254+0233 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 14404 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1254+0233_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.865448Jy sigma=0.008695 ! Fit after self-cal, rms=0.822540Jy sigma=0.008349 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.735 mas, bmaj=9.242 mas, bpa=18.68 degrees ! Estimated noise=894.323 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137801 Jy ! Component: 100 - total flux cleaned = 0.167857 Jy ! Total flux subtracted in 100 components = 0.167857 Jy ! Clean residual min=-0.005195 max=0.008420 Jy/beam ! Clean residual mean=-0.000021 rms=0.001431 Jy/beam ! Combined flux in latest and established models = 0.167857 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.167857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090808Jy sigma=0.000816 ! Fit after self-cal, rms=0.090799Jy sigma=0.000816 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.378 mas, bmaj=10.24 mas, bpa=18.45 degrees ! Estimated noise=595.666 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113702 Jy ! Component: 100 - total flux cleaned = 0.0160178 Jy ! Component: 150 - total flux cleaned = 0.0186127 Jy ! Component: 200 - total flux cleaned = 0.0203733 Jy ! Total flux subtracted in 200 components = 0.0203733 Jy ! Clean residual min=-0.003545 max=0.003567 Jy/beam ! Clean residual mean=-0.000005 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.18823 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 51 components and 0.18823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089255Jy sigma=0.000805 ! Fit after self-cal, rms=0.089256Jy sigma=0.000805 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.84 HN 1.02 KP 1.09 ! LA 1.12 MK 1.00* NL 0.93 OV 0.99 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.08 KP 1.04 ! LA 1.06 MK 1.00* NL 0.92 OV 1.00 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.17 HN 1.04 KP 0.92 ! LA 0.85 MK 1.00* NL 0.98 OV 0.95 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 1.05 KP 0.88 ! LA 0.80 MK 1.00* NL 1.06 OV 1.01 ! PT 1.03 SC 1.00 ! ! ! Fit before self-cal, rms=0.089256Jy sigma=0.000805 ! Fit after self-cal, rms=0.084931Jy sigma=0.000782 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.403 mas, bmaj=10.32 mas, bpa=18.57 degrees ! Estimated noise=593.617 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00138025 Jy ! Component: 100 - total flux cleaned = -0.00147157 Jy ! Component: 150 - total flux cleaned = -0.00159573 Jy ! Component: 200 - total flux cleaned = -0.00167763 Jy ! Total flux subtracted in 200 components = -0.00167763 Jy ! Clean residual min=-0.002325 max=0.002190 Jy/beam ! Clean residual mean=0.000001 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.186553 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.186553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084902Jy sigma=0.000782 ! Fit after self-cal, rms=0.084871Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084871Jy sigma=0.000782 ! Fit after self-cal, rms=0.085281Jy sigma=0.000778 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.398 mas, bmaj=10.3 mas, bpa=18.35 degrees ! Estimated noise=592.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00029612 Jy ! Component: 100 - total flux cleaned = -0.000429674 Jy ! Component: 150 - total flux cleaned = -0.000478294 Jy ! Component: 200 - total flux cleaned = -0.000478372 Jy ! Total flux subtracted in 200 components = -0.000478372 Jy ! Clean residual min=-0.001756 max=0.001701 Jy/beam ! Clean residual mean=-0.000002 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.186074 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 74 components and 0.186074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085276Jy sigma=0.000778 ! Fit after self-cal, rms=0.085292Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.3918e-06 Jy ! Component: 100 - total flux cleaned = -1.7341e-05 Jy ! Component: 150 - total flux cleaned = -1.7272e-05 Jy ! Component: 200 - total flux cleaned = -2.51498e-05 Jy ! Total flux subtracted in 200 components = -2.51498e-05 Jy ! Clean residual min=-0.001732 max=0.001678 Jy/beam ! Clean residual mean=-0.000002 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.186049 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 78 components and 0.186049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085290Jy sigma=0.000778 ! Fit after self-cal, rms=0.085289Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085289Jy sigma=0.000778 ! Fit after self-cal, rms=0.085357Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.397 mas, bmaj=10.3 mas, bpa=18.34 degrees ! Estimated noise=592.914 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000141163 Jy ! Component: 100 - total flux cleaned = -0.000150964 Jy ! Component: 150 - total flux cleaned = -0.000159199 Jy ! Component: 200 - total flux cleaned = -0.000166357 Jy ! Total flux subtracted in 200 components = -0.000166357 Jy ! Clean residual min=-0.001725 max=0.001682 Jy/beam ! Clean residual mean=-0.000001 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.185883 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 81 components and 0.185883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085356Jy sigma=0.000778 ! Fit after self-cal, rms=0.085357Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.45389e-06 Jy ! Component: 100 - total flux cleaned = -2.02858e-05 Jy ! Component: 150 - total flux cleaned = -3.32816e-05 Jy ! Component: 200 - total flux cleaned = -3.95673e-05 Jy ! Total flux subtracted in 200 components = -3.95673e-05 Jy ! Clean residual min=-0.001727 max=0.001671 Jy/beam ! Clean residual mean=-0.000001 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.185843 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 82 components and 0.185843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085356Jy sigma=0.000778 ! Fit after self-cal, rms=0.085356Jy sigma=0.000778 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085356Jy sigma=0.000778 ! Fit after self-cal, rms=0.085370Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.236 mas, bmaj=12.44 mas, bpa=12.76 degrees ! Estimated noise=671.444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000285209 Jy ! Component: 100 - total flux cleaned = -0.000324642 Jy ! Component: 150 - total flux cleaned = -0.00035083 Jy ! Component: 200 - total flux cleaned = -0.00037295 Jy ! Total flux subtracted in 200 components = -0.00037295 Jy ! Clean residual min=-0.001928 max=0.001739 Jy/beam ! Clean residual mean=-0.000002 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.18547 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 88 components and 0.18547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085369Jy sigma=0.000778 ! Fit after self-cal, rms=0.085369Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.33622e-05 Jy ! Component: 100 - total flux cleaned = -2.3225e-05 Jy ! Component: 150 - total flux cleaned = -3.67778e-05 Jy ! Component: 200 - total flux cleaned = -4.07029e-05 Jy ! Total flux subtracted in 200 components = -4.07029e-05 Jy ! Clean residual min=-0.001925 max=0.001729 Jy/beam ! Clean residual mean=-0.000002 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.185429 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 95 components and 0.185429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085369Jy sigma=0.000778 ! Fit after self-cal, rms=0.085370Jy sigma=0.000778 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.397 mas, bmaj=10.3 mas, bpa=18.34 degrees ! Estimated noise=592.889 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.397 x 10.3 at 18.34 degrees (North through East) ! Clean map min=-0.0016949 max=0.17903 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=9.265 mas, bpa=18.57 degrees ! Estimated noise=898.652 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138437 Jy ! Component: 100 - total flux cleaned = 0.168655 Jy ! Component: 150 - total flux cleaned = 0.176802 Jy ! Component: 200 - total flux cleaned = 0.180544 Jy ! Total flux subtracted in 200 components = 0.180544 Jy ! Clean residual min=-0.002599 max=0.002679 Jy/beam ! Clean residual mean=-0.000006 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.180544 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.180544 Jy ! Inverting map and beam ! Estimated beam: bmin=4.397 mas, bmaj=10.3 mas, bpa=18.34 degrees ! Estimated noise=592.889 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277006 Jy ! Component: 100 - total flux cleaned = 0.00398045 Jy ! Component: 150 - total flux cleaned = 0.00454456 Jy ! Component: 200 - total flux cleaned = 0.00468182 Jy ! Total flux subtracted in 200 components = 0.00468182 Jy ! Clean residual min=-0.001899 max=0.001587 Jy/beam ! Clean residual mean=-0.000001 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.185226 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 32 components and 0.185226 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.236 mas, bmaj=12.44 mas, bpa=12.76 degrees ! Estimated noise=671.444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.10984e-05 Jy ! Component: 100 - total flux cleaned = 3.25804e-07 Jy ! Component: 150 - total flux cleaned = 1.02376e-05 Jy ! Component: 200 - total flux cleaned = 9.79458e-06 Jy ! Total flux subtracted in 200 components = 9.79458e-06 Jy ! Clean residual min=-0.001964 max=0.001761 Jy/beam ! Clean residual mean=-0.000002 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.185235 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.84466e-06 Jy ! Component: 100 - total flux cleaned = 1.67504e-05 Jy ! Component: 150 - total flux cleaned = 3.08237e-05 Jy ! Component: 200 - total flux cleaned = 3.74773e-05 Jy ! Total flux subtracted in 200 components = 3.74773e-05 Jy ! Clean residual min=-0.001937 max=0.001749 Jy/beam ! Clean residual mean=-0.000002 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.185273 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 0.185273 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.397 mas, bmaj=10.3 mas, bpa=18.34 degrees ! Estimated noise=592.889 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105066 Jy ! Component: 100 - total flux cleaned = 6.04766e-05 Jy ! Component: 150 - total flux cleaned = 4.64376e-05 Jy ! Component: 200 - total flux cleaned = 5.8861e-05 Jy ! Total flux subtracted in 200 components = 5.8861e-05 Jy ! Clean residual min=-0.001795 max=0.001642 Jy/beam ! Clean residual mean=-0.000001 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.185332 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.185332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085375Jy sigma=0.000778 ! Fit after self-cal, rms=0.085375Jy sigma=0.000778 wmodel J1254+0233_S_2014_08_05_pus_map.mod ! Writing 51 model components to file: J1254+0233_S_2014_08_05_pus_map.mod wobs J1254+0233_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1254+0233_S_2014_08_05_pus_uvs.fits wwins J1254+0233_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J1254+0233_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.89018e-05 Jy ! Component: 100 - total flux cleaned = 6.69885e-05 Jy ! Component: 150 - total flux cleaned = 9.40923e-05 Jy ! Component: 200 - total flux cleaned = 0.000146344 Jy ! Component: 250 - total flux cleaned = 0.00024632 Jy ! Component: 300 - total flux cleaned = 0.000318963 Jy ! Component: 350 - total flux cleaned = 0.000484111 Jy ! Component: 400 - total flux cleaned = 0.000621688 Jy ! Component: 450 - total flux cleaned = 0.000777817 Jy ! Component: 500 - total flux cleaned = 0.000951063 Jy ! Component: 550 - total flux cleaned = 0.00103504 Jy ! Component: 600 - total flux cleaned = 0.00113757 Jy ! Component: 650 - total flux cleaned = 0.00113766 Jy ! Component: 700 - total flux cleaned = 0.0012364 Jy ! Component: 750 - total flux cleaned = 0.00125562 Jy ! Component: 800 - total flux cleaned = 0.00129353 Jy ! Component: 850 - total flux cleaned = 0.00127477 Jy ! Component: 900 - total flux cleaned = 0.00125643 Jy ! Component: 950 - total flux cleaned = 0.00123826 Jy ! Component: 1000 - total flux cleaned = 0.00125606 Jy ! Component: 1050 - total flux cleaned = 0.00122142 Jy ! Component: 1100 - total flux cleaned = 0.00120443 Jy ! Component: 1150 - total flux cleaned = 0.00117083 Jy ! Component: 1200 - total flux cleaned = 0.00120403 Jy ! Component: 1250 - total flux cleaned = 0.00128556 Jy ! Component: 1300 - total flux cleaned = 0.00130126 Jy ! Component: 1350 - total flux cleaned = 0.00125375 Jy ! Component: 1400 - total flux cleaned = 0.00133225 Jy ! Component: 1450 - total flux cleaned = 0.00131674 Jy ! Component: 1500 - total flux cleaned = 0.00131714 Jy ! Component: 1550 - total flux cleaned = 0.00137732 Jy ! Component: 1600 - total flux cleaned = 0.00136236 Jy ! Component: 1650 - total flux cleaned = 0.00140642 Jy ! Component: 1700 - total flux cleaned = 0.00140637 Jy ! Component: 1750 - total flux cleaned = 0.00144896 Jy ! Component: 1800 - total flux cleaned = 0.0014203 Jy ! Component: 1850 - total flux cleaned = 0.00140602 Jy ! Component: 1900 - total flux cleaned = 0.00146174 Jy ! Component: 1950 - total flux cleaned = 0.00146179 Jy ! Component: 2000 - total flux cleaned = 0.00147538 Jy ! Component: 2050 - total flux cleaned = 0.00147559 Jy ! Component: 2100 - total flux cleaned = 0.00146225 Jy ! Component: 2150 - total flux cleaned = 0.00146234 Jy ! Component: 2200 - total flux cleaned = 0.00148856 Jy ! Component: 2250 - total flux cleaned = 0.00150139 Jy ! Component: 2300 - total flux cleaned = 0.00148864 Jy ! Component: 2350 - total flux cleaned = 0.00151413 Jy ! Component: 2400 - total flux cleaned = 0.00150154 Jy ! Component: 2450 - total flux cleaned = 0.0015263 Jy ! Component: 2500 - total flux cleaned = 0.00150179 Jy ! Component: 2550 - total flux cleaned = 0.00151401 Jy ! Component: 2600 - total flux cleaned = 0.00153815 Jy ! Component: 2650 - total flux cleaned = 0.00151412 Jy ! Component: 2700 - total flux cleaned = 0.00151423 Jy ! Component: 2750 - total flux cleaned = 0.00157318 Jy ! Component: 2800 - total flux cleaned = 0.00156145 Jy ! Component: 2850 - total flux cleaned = 0.00154974 Jy ! Component: 2900 - total flux cleaned = 0.00154977 Jy ! Component: 2950 - total flux cleaned = 0.00153844 Jy ! Component: 3000 - total flux cleaned = 0.00156111 Jy ! Component: 3050 - total flux cleaned = 0.00154994 Jy ! Component: 3100 - total flux cleaned = 0.00160581 Jy ! Component: 3150 - total flux cleaned = 0.00161679 Jy ! Component: 3200 - total flux cleaned = 0.00166094 Jy ! Component: 3250 - total flux cleaned = 0.00171567 Jy ! Component: 3300 - total flux cleaned = 0.0017265 Jy ! Component: 3350 - total flux cleaned = 0.00178045 Jy ! Component: 3400 - total flux cleaned = 0.00181261 Jy ! Component: 3450 - total flux cleaned = 0.00181261 Jy ! Component: 3500 - total flux cleaned = 0.00187601 Jy ! Component: 3550 - total flux cleaned = 0.00188649 Jy ! Component: 3600 - total flux cleaned = 0.001876 Jy ! Component: 3650 - total flux cleaned = 0.00190706 Jy ! Component: 3700 - total flux cleaned = 0.00193793 Jy ! Component: 3750 - total flux cleaned = 0.001938 Jy ! Component: 3800 - total flux cleaned = 0.00195831 Jy ! Component: 3850 - total flux cleaned = 0.00197852 Jy ! Component: 3900 - total flux cleaned = 0.00199862 Jy ! Component: 3950 - total flux cleaned = 0.00202842 Jy ! Component: 4000 - total flux cleaned = 0.00208773 Jy ! Component: 4050 - total flux cleaned = 0.00209739 Jy ! Total flux subtracted in 4096 components = 0.00211701 Jy ! Clean residual min=-0.000512 max=0.000598 Jy/beam ! Clean residual mean=0.000001 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.187449 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 348 components and 0.187449 Jy ![Exited script file: muppet] wmap "J1254+0233_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.397 x 10.3 at 18.34 degrees (North through East) ! Clean map min=-0.0011734 max=0.17925 Jy/beam ! Writing clean map to FITS file: J1254+0233_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.179249 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000181314 device "J1254+0233_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1254+0233_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.303457 0.303457 0.606913 1.21383 2.42765 4.85531 9.71061 19.4212 38.8425 77.6849 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.179 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.397 x 10.3 at 18.34 degrees (North through East) ! Clean map min=-0.0011734 max=0.17925 Jy/beam quit ! Quitting program ! Log file J1254+0233_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:27:48 2016