! Started logfile: J1249+2817_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:27:32 2016 obs J1249+2817_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1249+2817_S_2014_08_05_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.713788 visibilities/baseline/integration-bin. ! Found source: J1249+2817 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 10664 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1249+2817_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.925916Jy sigma=0.010288 ! Fit after self-cal, rms=0.909792Jy sigma=0.010147 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.96 mas, bmaj=7.325 mas, bpa=27.62 degrees ! Estimated noise=1024.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0703951 Jy ! Component: 100 - total flux cleaned = 0.0862617 Jy ! Total flux subtracted in 100 components = 0.0862617 Jy ! Clean residual min=-0.003712 max=0.005537 Jy/beam ! Clean residual mean=0.000008 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.0862617 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0862617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078352Jy sigma=0.000793 ! Fit after self-cal, rms=0.078338Jy sigma=0.000793 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.698 mas, bmaj=8.063 mas, bpa=25.09 degrees ! Estimated noise=627.243 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00670766 Jy ! Component: 100 - total flux cleaned = 0.00965381 Jy ! Component: 150 - total flux cleaned = 0.0114153 Jy ! Component: 200 - total flux cleaned = 0.012531 Jy ! Total flux subtracted in 200 components = 0.012531 Jy ! Clean residual min=-0.002797 max=0.003601 Jy/beam ! Clean residual mean=0.000023 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.0987928 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 31 components and 0.0987928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077684Jy sigma=0.000788 ! Fit after self-cal, rms=0.077677Jy sigma=0.000788 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.89 HN 0.96 KP 0.99 ! LA 1.10 MK 1.00* NL 1.00 OV 0.97 ! PT 1.15 SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.01 KP 0.99 ! LA 1.04 MK 1.00* NL 1.01 OV 0.99 ! PT 1.14 SC 1.06 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.15 HN 1.02 KP 0.88 ! LA 0.82 MK 1.00* NL 0.95 OV 0.93 ! PT 1.09 SC 1.06 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.98 HN 1.04 KP 0.86 ! LA 0.75 MK 1.00* NL 1.05 OV 0.93 ! PT 1.10 SC 1.05 ! ! ! Fit before self-cal, rms=0.077677Jy sigma=0.000788 ! Fit after self-cal, rms=0.075306Jy sigma=0.000777 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.73 mas, bmaj=8.074 mas, bpa=24.76 degrees ! Estimated noise=624.993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.62419e-05 Jy ! Component: 100 - total flux cleaned = -0.000135328 Jy ! Component: 150 - total flux cleaned = -0.000207323 Jy ! Component: 200 - total flux cleaned = -0.000250354 Jy ! Total flux subtracted in 200 components = -0.000250354 Jy ! Clean residual min=-0.002628 max=0.002559 Jy/beam ! Clean residual mean=0.000013 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.0985424 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.0985424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075286Jy sigma=0.000777 ! Fit after self-cal, rms=0.075266Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075266Jy sigma=0.000777 ! Fit after self-cal, rms=0.076304Jy sigma=0.000773 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.711 mas, bmaj=8.082 mas, bpa=24.74 degrees ! Estimated noise=623.396 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.86296e-05 Jy ! Component: 100 - total flux cleaned = -9.83416e-05 Jy ! Component: 150 - total flux cleaned = -9.88328e-05 Jy ! Component: 200 - total flux cleaned = -0.000116135 Jy ! Total flux subtracted in 200 components = -0.000116135 Jy ! Clean residual min=-0.001934 max=0.001837 Jy/beam ! Clean residual mean=0.000004 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0984263 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.0984263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076296Jy sigma=0.000773 ! Fit after self-cal, rms=0.076320Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.11109e-05 Jy ! Component: 100 - total flux cleaned = -3.77436e-05 Jy ! Component: 150 - total flux cleaned = -8.28751e-06 Jy ! Component: 200 - total flux cleaned = 5.90548e-06 Jy ! Total flux subtracted in 200 components = 5.90548e-06 Jy ! Clean residual min=-0.001935 max=0.001850 Jy/beam ! Clean residual mean=0.000004 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0984322 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.0984322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076315Jy sigma=0.000773 ! Fit after self-cal, rms=0.076314Jy sigma=0.000773 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076314Jy sigma=0.000773 ! Fit after self-cal, rms=0.076299Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.706 mas, bmaj=8.084 mas, bpa=24.76 degrees ! Estimated noise=622.564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.53906e-05 Jy ! Component: 100 - total flux cleaned = -6.52691e-05 Jy ! Component: 150 - total flux cleaned = -3.89589e-05 Jy ! Component: 200 - total flux cleaned = -2.59619e-05 Jy ! Total flux subtracted in 200 components = -2.59619e-05 Jy ! Clean residual min=-0.001901 max=0.001810 Jy/beam ! Clean residual mean=0.000004 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.0984062 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.0984062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076295Jy sigma=0.000773 ! Fit after self-cal, rms=0.076297Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.03527e-05 Jy ! Component: 100 - total flux cleaned = 2.23381e-05 Jy ! Component: 150 - total flux cleaned = 3.39155e-05 Jy ! Component: 200 - total flux cleaned = 5.64487e-05 Jy ! Total flux subtracted in 200 components = 5.64487e-05 Jy ! Clean residual min=-0.001910 max=0.001804 Jy/beam ! Clean residual mean=0.000004 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0984627 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.0984627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076294Jy sigma=0.000773 ! Fit after self-cal, rms=0.076294Jy sigma=0.000773 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076294Jy sigma=0.000773 ! Fit after self-cal, rms=0.076247Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.32 mas, bmaj=9.737 mas, bpa=5.748 degrees ! Estimated noise=705.297 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000566213 Jy ! Component: 100 - total flux cleaned = 0.000649191 Jy ! Component: 150 - total flux cleaned = 0.000700248 Jy ! Component: 200 - total flux cleaned = 0.000745393 Jy ! Total flux subtracted in 200 components = 0.000745393 Jy ! Clean residual min=-0.001959 max=0.001717 Jy/beam ! Clean residual mean=0.000007 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.0992081 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 57 components and 0.0992081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076249Jy sigma=0.000773 ! Fit after self-cal, rms=0.076247Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.38478e-05 Jy ! Component: 100 - total flux cleaned = 0.000101522 Jy ! Component: 150 - total flux cleaned = 0.000115132 Jy ! Component: 200 - total flux cleaned = 0.000127612 Jy ! Total flux subtracted in 200 components = 0.000127612 Jy ! Clean residual min=-0.001952 max=0.001723 Jy/beam ! Clean residual mean=0.000007 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.0993357 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 64 components and 0.0993357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076248Jy sigma=0.000773 ! Fit after self-cal, rms=0.076247Jy sigma=0.000773 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.702 mas, bmaj=8.085 mas, bpa=24.81 degrees ! Estimated noise=622.057 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.702 x 8.085 at 24.81 degrees (North through East) ! Clean map min=-0.0018353 max=0.090578 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.96 mas, bmaj=7.342 mas, bpa=27.31 degrees ! Estimated noise=1017.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0698634 Jy ! Component: 100 - total flux cleaned = 0.085754 Jy ! Component: 150 - total flux cleaned = 0.0913019 Jy ! Component: 200 - total flux cleaned = 0.0940788 Jy ! Total flux subtracted in 200 components = 0.0940788 Jy ! Clean residual min=-0.002899 max=0.002765 Jy/beam ! Clean residual mean=0.000002 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.0940788 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0940788 Jy ! Inverting map and beam ! Estimated beam: bmin=4.702 mas, bmaj=8.085 mas, bpa=24.81 degrees ! Estimated noise=622.057 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279552 Jy ! Component: 100 - total flux cleaned = 0.00425835 Jy ! Component: 150 - total flux cleaned = 0.005118 Jy ! Component: 200 - total flux cleaned = 0.00538468 Jy ! Total flux subtracted in 200 components = 0.00538468 Jy ! Clean residual min=-0.001938 max=0.001703 Jy/beam ! Clean residual mean=0.000003 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.0994635 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 43 components and 0.0994635 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.32 mas, bmaj=9.737 mas, bpa=5.748 degrees ! Estimated noise=705.297 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000807119 Jy ! Component: 100 - total flux cleaned = 0.0011718 Jy ! Component: 150 - total flux cleaned = 0.00133569 Jy ! Component: 200 - total flux cleaned = 0.00143344 Jy ! Total flux subtracted in 200 components = 0.00143344 Jy ! Clean residual min=-0.001768 max=0.001533 Jy/beam ! Clean residual mean=0.000006 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.100897 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.21937e-05 Jy ! Component: 100 - total flux cleaned = 9.58818e-05 Jy ! Component: 150 - total flux cleaned = 0.00012663 Jy ! Component: 200 - total flux cleaned = 0.000145634 Jy ! Total flux subtracted in 200 components = 0.000145634 Jy ! Clean residual min=-0.001752 max=0.001537 Jy/beam ! Clean residual mean=0.000006 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.101043 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 82 components and 0.101043 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.702 mas, bmaj=8.085 mas, bpa=24.81 degrees ! Estimated noise=622.057 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000306836 Jy ! Component: 100 - total flux cleaned = -0.000368408 Jy ! Component: 150 - total flux cleaned = -0.000405839 Jy ! Component: 200 - total flux cleaned = -0.000423555 Jy ! Total flux subtracted in 200 components = -0.000423555 Jy ! Clean residual min=-0.001856 max=0.001637 Jy/beam ! Clean residual mean=0.000004 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.100619 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 96 components and 0.100619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076224Jy sigma=0.000772 ! Fit after self-cal, rms=0.076224Jy sigma=0.000772 wmodel J1249+2817_S_2014_08_05_pus_map.mod ! Writing 96 model components to file: J1249+2817_S_2014_08_05_pus_map.mod wobs J1249+2817_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1249+2817_S_2014_08_05_pus_uvs.fits wwins J1249+2817_S_2014_08_05_pus_map.win ! wwins: Wrote 2 windows to J1249+2817_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000332904 Jy ! Component: 100 - total flux cleaned = -0.000277246 Jy ! Component: 150 - total flux cleaned = -0.000169497 Jy ! Component: 200 - total flux cleaned = -0.000170311 Jy ! Component: 250 - total flux cleaned = -0.000120007 Jy ! Component: 300 - total flux cleaned = 2.52015e-05 Jy ! Component: 350 - total flux cleaned = 9.60419e-05 Jy ! Component: 400 - total flux cleaned = 0.000187831 Jy ! Component: 450 - total flux cleaned = 0.000209841 Jy ! Component: 500 - total flux cleaned = 0.000144664 Jy ! Component: 550 - total flux cleaned = 0.000231607 Jy ! Component: 600 - total flux cleaned = 0.000273994 Jy ! Component: 650 - total flux cleaned = 0.000274283 Jy ! Component: 700 - total flux cleaned = 0.000274378 Jy ! Component: 750 - total flux cleaned = 0.000274887 Jy ! Component: 800 - total flux cleaned = 0.000352355 Jy ! Component: 850 - total flux cleaned = 0.000333387 Jy ! Component: 900 - total flux cleaned = 0.000333763 Jy ! Component: 950 - total flux cleaned = 0.000406945 Jy ! Component: 1000 - total flux cleaned = 0.000407115 Jy ! Component: 1050 - total flux cleaned = 0.000460515 Jy ! Component: 1100 - total flux cleaned = 0.000442939 Jy ! Component: 1150 - total flux cleaned = 0.000477216 Jy ! Component: 1200 - total flux cleaned = 0.000460033 Jy ! Component: 1250 - total flux cleaned = 0.00044315 Jy ! Component: 1300 - total flux cleaned = 0.000394138 Jy ! Component: 1350 - total flux cleaned = 0.000410318 Jy ! Component: 1400 - total flux cleaned = 0.000346651 Jy ! Component: 1450 - total flux cleaned = 0.000331199 Jy ! Component: 1500 - total flux cleaned = 0.000331303 Jy ! Component: 1550 - total flux cleaned = 0.000330992 Jy ! Component: 1600 - total flux cleaned = 0.000270333 Jy ! Component: 1650 - total flux cleaned = 0.000240571 Jy ! Component: 1700 - total flux cleaned = 0.000240486 Jy ! Component: 1750 - total flux cleaned = 0.000225694 Jy ! Component: 1800 - total flux cleaned = 0.000211088 Jy ! Component: 1850 - total flux cleaned = 0.000211041 Jy ! Component: 1900 - total flux cleaned = 0.000168843 Jy ! Component: 1950 - total flux cleaned = 0.000224265 Jy ! Component: 2000 - total flux cleaned = 0.000183121 Jy ! Component: 2050 - total flux cleaned = 0.000210142 Jy ! Component: 2100 - total flux cleaned = 0.000196529 Jy ! Component: 2150 - total flux cleaned = 0.000170248 Jy ! Component: 2200 - total flux cleaned = 0.000157288 Jy ! Component: 2250 - total flux cleaned = 0.000222026 Jy ! Component: 2300 - total flux cleaned = 0.000170804 Jy ! Component: 2350 - total flux cleaned = 0.000221377 Jy ! Component: 2400 - total flux cleaned = 0.000183614 Jy ! Component: 2450 - total flux cleaned = 0.000245967 Jy ! Component: 2500 - total flux cleaned = 0.000258262 Jy ! Component: 2550 - total flux cleaned = 0.000282614 Jy ! Component: 2600 - total flux cleaned = 0.00028252 Jy ! Component: 2650 - total flux cleaned = 0.000330527 Jy ! Component: 2700 - total flux cleaned = 0.000330566 Jy ! Component: 2750 - total flux cleaned = 0.000354146 Jy ! Component: 2800 - total flux cleaned = 0.000342608 Jy ! Component: 2850 - total flux cleaned = 0.000296547 Jy ! Component: 2900 - total flux cleaned = 0.000342449 Jy ! Component: 2950 - total flux cleaned = 0.000353904 Jy ! Component: 3000 - total flux cleaned = 0.000365139 Jy ! Component: 3050 - total flux cleaned = 0.000365075 Jy ! Component: 3100 - total flux cleaned = 0.000320918 Jy ! Component: 3150 - total flux cleaned = 0.000353876 Jy ! Component: 3200 - total flux cleaned = 0.000343001 Jy ! Component: 3250 - total flux cleaned = 0.000299751 Jy ! Component: 3300 - total flux cleaned = 0.000299752 Jy ! Component: 3350 - total flux cleaned = 0.000289126 Jy ! Component: 3400 - total flux cleaned = 0.000278645 Jy ! Component: 3450 - total flux cleaned = 0.000299674 Jy ! Component: 3500 - total flux cleaned = 0.000268467 Jy ! Component: 3550 - total flux cleaned = 0.00027862 Jy ! Component: 3600 - total flux cleaned = 0.000288949 Jy ! Component: 3650 - total flux cleaned = 0.000217783 Jy ! Component: 3700 - total flux cleaned = 0.000207712 Jy ! Component: 3750 - total flux cleaned = 0.000217734 Jy ! Component: 3800 - total flux cleaned = 0.000207832 Jy ! Component: 3850 - total flux cleaned = 0.000217736 Jy ! Component: 3900 - total flux cleaned = 0.000207911 Jy ! Component: 3950 - total flux cleaned = 0.000169041 Jy ! Component: 4000 - total flux cleaned = 0.000188385 Jy ! Component: 4050 - total flux cleaned = 0.000188412 Jy ! Total flux subtracted in 4096 components = 0.000140699 Jy ! Clean residual min=-0.000554 max=0.000514 Jy/beam ! Clean residual mean=0.000001 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.10076 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 369 components and 0.10076 Jy ![Exited script file: muppet] wmap "J1249+2817_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.702 x 8.085 at 24.81 degrees (North through East) ! Clean map min=-0.0014556 max=0.09044 Jy/beam ! Writing clean map to FITS file: J1249+2817_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0904399 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000179901 device "J1249+2817_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1249+2817_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.596753 0.596753 1.19351 2.38701 4.77402 9.54805 19.0961 38.1922 76.3844 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.09 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.702 x 8.085 at 24.81 degrees (North through East) ! Clean map min=-0.0014556 max=0.09044 Jy/beam quit ! Quitting program ! Log file J1249+2817_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:27:37 2016