! Started logfile: J1155-1017_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:26:21 2016 obs J1155-1017_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1155-1017_S_2014_08_05_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622584 visibilities/baseline/integration-bin. ! Found source: J1155-1017 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 13784 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1155-1017_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 317 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 377 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 377 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 257 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.942715Jy sigma=0.009559 ! Fit after self-cal, rms=0.905378Jy sigma=0.009213 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.461 mas, bmaj=11.09 mas, bpa=14.2 degrees ! Estimated noise=920.339 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.075983 Jy ! Component: 100 - total flux cleaned = 0.092555 Jy ! Total flux subtracted in 100 components = 0.092555 Jy ! Clean residual min=-0.006043 max=0.006716 Jy/beam ! Clean residual mean=-0.000014 rms=0.001487 Jy/beam ! Combined flux in latest and established models = 0.092555 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.092555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083533Jy sigma=0.000803 ! Fit after self-cal, rms=0.083188Jy sigma=0.000799 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.379 mas, bmaj=12.23 mas, bpa=12.21 degrees ! Estimated noise=640.643 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194895 Jy ! Component: 100 - total flux cleaned = 0.00171384 Jy ! Component: 150 - total flux cleaned = 0.00152122 Jy ! Component: 200 - total flux cleaned = 0.00151437 Jy ! Total flux subtracted in 200 components = 0.00151437 Jy ! Clean residual min=-0.004425 max=0.004388 Jy/beam ! Clean residual mean=-0.000015 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.0940694 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0940694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082822Jy sigma=0.000796 ! Fit after self-cal, rms=0.082808Jy sigma=0.000796 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.86 HN 0.98 KP 1.01 ! LA 0.99 MK 1.00* NL 1.00 OV 0.97 ! PT 1.16 SC 0.99 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.22 HN 1.02 KP 0.98 ! LA 1.02 MK 1.00* NL 0.95 OV 1.00 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.10 HN 1.03 KP 0.96 ! LA 0.78 MK 1.00* NL 0.98 OV 0.89 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.08 HN 0.91 KP 1.08 ! LA 0.82 MK 1.00* NL 1.10 OV 0.98 ! PT 1.21 SC 0.93 ! ! ! Fit before self-cal, rms=0.082808Jy sigma=0.000796 ! Fit after self-cal, rms=0.080567Jy sigma=0.000786 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.357 mas, bmaj=12.22 mas, bpa=12.25 degrees ! Estimated noise=634.403 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0004368 Jy ! Component: 100 - total flux cleaned = -0.000438722 Jy ! Component: 150 - total flux cleaned = -0.000406485 Jy ! Component: 200 - total flux cleaned = -0.000355128 Jy ! Total flux subtracted in 200 components = -0.000355128 Jy ! Clean residual min=-0.003525 max=0.004388 Jy/beam ! Clean residual mean=-0.000012 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 0.0937142 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.0937142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080524Jy sigma=0.000786 ! Fit after self-cal, rms=0.080482Jy sigma=0.000785 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080482Jy sigma=0.000785 ! Fit after self-cal, rms=0.088377Jy sigma=0.000769 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.337 mas, bmaj=12.2 mas, bpa=11.94 degrees ! Estimated noise=635.855 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000616041 Jy ! Component: 100 - total flux cleaned = 0.000582693 Jy ! Component: 150 - total flux cleaned = 0.000523279 Jy ! Component: 200 - total flux cleaned = 0.000473382 Jy ! Total flux subtracted in 200 components = 0.000473382 Jy ! Clean residual min=-0.001928 max=0.001942 Jy/beam ! Clean residual mean=0.000006 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0941876 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.0941876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088351Jy sigma=0.000768 ! Fit after self-cal, rms=0.088970Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109941 Jy ! Component: 100 - total flux cleaned = -0.000111142 Jy ! Component: 150 - total flux cleaned = -7.53983e-05 Jy ! Component: 200 - total flux cleaned = -2.6691e-05 Jy ! Total flux subtracted in 200 components = -2.6691e-05 Jy ! Clean residual min=-0.001917 max=0.001795 Jy/beam ! Clean residual mean=0.000002 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.0941609 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.0941609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088963Jy sigma=0.000767 ! Fit after self-cal, rms=0.088969Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088969Jy sigma=0.000767 ! Fit after self-cal, rms=0.092040Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.329 mas, bmaj=12.18 mas, bpa=11.89 degrees ! Estimated noise=636.012 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000325115 Jy ! Component: 100 - total flux cleaned = 0.000308436 Jy ! Component: 150 - total flux cleaned = 0.000293096 Jy ! Component: 200 - total flux cleaned = 0.000266193 Jy ! Total flux subtracted in 200 components = 0.000266193 Jy ! Clean residual min=-0.001881 max=0.001814 Jy/beam ! Clean residual mean=0.000003 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0944271 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.0944271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092033Jy sigma=0.000767 ! Fit after self-cal, rms=0.092136Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.36776e-06 Jy ! Component: 100 - total flux cleaned = 1.17513e-05 Jy ! Component: 150 - total flux cleaned = 3.20486e-05 Jy ! Component: 200 - total flux cleaned = 5.98125e-05 Jy ! Total flux subtracted in 200 components = 5.98125e-05 Jy ! Clean residual min=-0.001851 max=0.001786 Jy/beam ! Clean residual mean=0.000003 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0944869 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.0944869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092133Jy sigma=0.000767 ! Fit after self-cal, rms=0.092137Jy sigma=0.000767 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092137Jy sigma=0.000767 ! Fit after self-cal, rms=0.092806Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.976 mas, bmaj=15.98 mas, bpa=3.988 degrees ! Estimated noise=731.942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000243455 Jy ! Component: 100 - total flux cleaned = 0.00027666 Jy ! Component: 150 - total flux cleaned = 0.000297636 Jy ! Component: 200 - total flux cleaned = 0.000310548 Jy ! Total flux subtracted in 200 components = 0.000310548 Jy ! Clean residual min=-0.001678 max=0.001350 Jy/beam ! Clean residual mean=0.000004 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0947975 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.0947975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092804Jy sigma=0.000767 ! Fit after self-cal, rms=0.092820Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.18533e-05 Jy ! Component: 100 - total flux cleaned = 3.40199e-05 Jy ! Component: 150 - total flux cleaned = 4.52811e-05 Jy ! Component: 200 - total flux cleaned = 5.597e-05 Jy ! Total flux subtracted in 200 components = 5.597e-05 Jy ! Clean residual min=-0.001657 max=0.001342 Jy/beam ! Clean residual mean=0.000004 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0948535 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.0948535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092819Jy sigma=0.000767 ! Fit after self-cal, rms=0.092820Jy sigma=0.000767 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.325 mas, bmaj=12.17 mas, bpa=11.85 degrees ! Estimated noise=636.263 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.325 x 12.17 at 11.85 degrees (North through East) ! Clean map min=-0.0017816 max=0.096995 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=11.02 mas, bpa=13.86 degrees ! Estimated noise=917.591 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.075797 Jy ! Component: 100 - total flux cleaned = 0.0923268 Jy ! Component: 150 - total flux cleaned = 0.0947454 Jy ! Component: 200 - total flux cleaned = 0.0951165 Jy ! Total flux subtracted in 200 components = 0.0951165 Jy ! Clean residual min=-0.003221 max=0.003161 Jy/beam ! Clean residual mean=0.000003 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.0951165 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0951165 Jy ! Inverting map and beam ! Estimated beam: bmin=4.325 mas, bmaj=12.17 mas, bpa=11.85 degrees ! Estimated noise=636.263 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.09159e-05 Jy ! Component: 100 - total flux cleaned = -0.000267597 Jy ! Component: 150 - total flux cleaned = -0.000407277 Jy ! Component: 200 - total flux cleaned = -0.000377673 Jy ! Total flux subtracted in 200 components = -0.000377673 Jy ! Clean residual min=-0.001843 max=0.001701 Jy/beam ! Clean residual mean=0.000003 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.0947389 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 24 components and 0.0947389 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.976 mas, bmaj=15.98 mas, bpa=3.988 degrees ! Estimated noise=731.942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107134 Jy ! Component: 100 - total flux cleaned = 0.000153684 Jy ! Component: 150 - total flux cleaned = 0.000181352 Jy ! Component: 200 - total flux cleaned = 0.000192692 Jy ! Total flux subtracted in 200 components = 0.000192692 Jy ! Clean residual min=-0.001647 max=0.001335 Jy/beam ! Clean residual mean=0.000004 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.0949316 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.04236e-05 Jy ! Component: 100 - total flux cleaned = 1.96881e-05 Jy ! Component: 150 - total flux cleaned = 2.90961e-05 Jy ! Component: 200 - total flux cleaned = 3.75605e-05 Jy ! Total flux subtracted in 200 components = 3.75605e-05 Jy ! Clean residual min=-0.001643 max=0.001340 Jy/beam ! Clean residual mean=0.000004 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0949691 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.0949691 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.325 mas, bmaj=12.17 mas, bpa=11.85 degrees ! Estimated noise=636.263 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000327381 Jy ! Component: 100 - total flux cleaned = -0.000329292 Jy ! Component: 150 - total flux cleaned = -0.000329986 Jy ! Component: 200 - total flux cleaned = -0.00033007 Jy ! Total flux subtracted in 200 components = -0.00033007 Jy ! Clean residual min=-0.001816 max=0.001777 Jy/beam ! Clean residual mean=0.000003 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.094639 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.094639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092833Jy sigma=0.000767 ! Fit after self-cal, rms=0.092845Jy sigma=0.000767 wmodel J1155-1017_S_2014_08_05_pus_map.mod ! Writing 38 model components to file: J1155-1017_S_2014_08_05_pus_map.mod wobs J1155-1017_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1155-1017_S_2014_08_05_pus_uvs.fits wwins J1155-1017_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J1155-1017_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.86129e-05 Jy ! Component: 100 - total flux cleaned = -1.59282e-05 Jy ! Component: 150 - total flux cleaned = 6.30428e-05 Jy ! Component: 200 - total flux cleaned = 8.92158e-05 Jy ! Component: 250 - total flux cleaned = 0.000210512 Jy ! Component: 300 - total flux cleaned = 0.000327725 Jy ! Component: 350 - total flux cleaned = 0.000395978 Jy ! Component: 400 - total flux cleaned = 0.000439729 Jy ! Component: 450 - total flux cleaned = 0.00046093 Jy ! Component: 500 - total flux cleaned = 0.000565598 Jy ! Component: 550 - total flux cleaned = 0.000606409 Jy ! Component: 600 - total flux cleaned = 0.000606316 Jy ! Component: 650 - total flux cleaned = 0.000645715 Jy ! Component: 700 - total flux cleaned = 0.00066518 Jy ! Component: 750 - total flux cleaned = 0.000684383 Jy ! Component: 800 - total flux cleaned = 0.000684492 Jy ! Component: 850 - total flux cleaned = 0.0007032 Jy ! Component: 900 - total flux cleaned = 0.000738927 Jy ! Component: 950 - total flux cleaned = 0.000721081 Jy ! Component: 1000 - total flux cleaned = 0.000703621 Jy ! Component: 1050 - total flux cleaned = 0.000651958 Jy ! Component: 1100 - total flux cleaned = 0.000651902 Jy ! Component: 1150 - total flux cleaned = 0.000601937 Jy ! Component: 1200 - total flux cleaned = 0.000618365 Jy ! Component: 1250 - total flux cleaned = 0.000602409 Jy ! Component: 1300 - total flux cleaned = 0.000538992 Jy ! Component: 1350 - total flux cleaned = 0.000523461 Jy ! Component: 1400 - total flux cleaned = 0.00052374 Jy ! Component: 1450 - total flux cleaned = 0.000539101 Jy ! Component: 1500 - total flux cleaned = 0.000493705 Jy ! Component: 1550 - total flux cleaned = 0.000463973 Jy ! Component: 1600 - total flux cleaned = 0.000434377 Jy ! Component: 1650 - total flux cleaned = 0.000376302 Jy ! Component: 1700 - total flux cleaned = 0.000405242 Jy ! Component: 1750 - total flux cleaned = 0.000348544 Jy ! Component: 1800 - total flux cleaned = 0.000320525 Jy ! Component: 1850 - total flux cleaned = 0.000334735 Jy ! Component: 1900 - total flux cleaned = 0.000307075 Jy ! Component: 1950 - total flux cleaned = 0.000293485 Jy ! Component: 2000 - total flux cleaned = 0.000266673 Jy ! Component: 2050 - total flux cleaned = 0.000266603 Jy ! Component: 2100 - total flux cleaned = 0.000266614 Jy ! Component: 2150 - total flux cleaned = 0.000214602 Jy ! Component: 2200 - total flux cleaned = 0.000227562 Jy ! Component: 2250 - total flux cleaned = 0.000265832 Jy ! Component: 2300 - total flux cleaned = 0.000290995 Jy ! Component: 2350 - total flux cleaned = 0.000365698 Jy ! Component: 2400 - total flux cleaned = 0.000365616 Jy ! Component: 2450 - total flux cleaned = 0.000402303 Jy ! Component: 2500 - total flux cleaned = 0.000462941 Jy ! Component: 2550 - total flux cleaned = 0.000474986 Jy ! Component: 2600 - total flux cleaned = 0.000510537 Jy ! Component: 2650 - total flux cleaned = 0.000569386 Jy ! Component: 2700 - total flux cleaned = 0.000627525 Jy ! Component: 2750 - total flux cleaned = 0.000661976 Jy ! Component: 2800 - total flux cleaned = 0.000719254 Jy ! Component: 2850 - total flux cleaned = 0.000719207 Jy ! Component: 2900 - total flux cleaned = 0.000764329 Jy ! Component: 2950 - total flux cleaned = 0.000797783 Jy ! Component: 3000 - total flux cleaned = 0.000853127 Jy ! Component: 3050 - total flux cleaned = 0.000831212 Jy ! Component: 3100 - total flux cleaned = 0.000885875 Jy ! Component: 3150 - total flux cleaned = 0.000929312 Jy ! Component: 3200 - total flux cleaned = 0.000950869 Jy ! Component: 3250 - total flux cleaned = 0.00099354 Jy ! Component: 3300 - total flux cleaned = 0.00100405 Jy ! Component: 3350 - total flux cleaned = 0.00105659 Jy ! Component: 3400 - total flux cleaned = 0.00107742 Jy ! Component: 3450 - total flux cleaned = 0.00109813 Jy ! Component: 3500 - total flux cleaned = 0.00120061 Jy ! Component: 3550 - total flux cleaned = 0.00122093 Jy ! Component: 3600 - total flux cleaned = 0.00125125 Jy ! Component: 3650 - total flux cleaned = 0.00131143 Jy ! Component: 3700 - total flux cleaned = 0.00136111 Jy ! Component: 3750 - total flux cleaned = 0.00141045 Jy ! Component: 3800 - total flux cleaned = 0.00143983 Jy ! Component: 3850 - total flux cleaned = 0.00151773 Jy ! Component: 3900 - total flux cleaned = 0.00158539 Jy ! Component: 3950 - total flux cleaned = 0.00164311 Jy ! Component: 4000 - total flux cleaned = 0.0016527 Jy ! Component: 4050 - total flux cleaned = 0.00175706 Jy ! Total flux subtracted in 4096 components = 0.00180419 Jy ! Clean residual min=-0.000583 max=0.000541 Jy/beam ! Clean residual mean=0.000003 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.0964432 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 296 components and 0.0964432 Jy ![Exited script file: muppet] wmap "J1155-1017_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.325 x 12.17 at 11.85 degrees (North through East) ! Clean map min=-0.0013552 max=0.096846 Jy/beam ! Writing clean map to FITS file: J1155-1017_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0968465 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000176073 device "J1155-1017_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1155-1017_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.545417 0.545417 1.09083 2.18167 4.36334 8.72668 17.4534 34.9067 69.8134 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.096 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.325 x 12.17 at 11.85 degrees (North through East) ! Clean map min=-0.0013552 max=0.096846 Jy/beam quit ! Quitting program ! Log file J1155-1017_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:26:26 2016