! Started logfile: J1153-1105_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:26:15 2016 obs J1153-1105_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1153-1105_S_2014_08_05_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.61419 visibilities/baseline/integration-bin. ! Found source: J1153-1105 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 9176 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1153-1105_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.839160Jy sigma=0.008302 ! Fit after self-cal, rms=0.816524Jy sigma=0.008086 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.574 mas, bmaj=11.26 mas, bpa=15.1 degrees ! Estimated noise=1081.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.144619 Jy ! Component: 100 - total flux cleaned = 0.176156 Jy ! Total flux subtracted in 100 components = 0.176156 Jy ! Clean residual min=-0.006105 max=0.008805 Jy/beam ! Clean residual mean=0.000014 rms=0.001825 Jy/beam ! Combined flux in latest and established models = 0.176156 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.176156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093711Jy sigma=0.000855 ! Fit after self-cal, rms=0.093738Jy sigma=0.000854 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.469 mas, bmaj=12.55 mas, bpa=13.49 degrees ! Estimated noise=779.332 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100077 Jy ! Component: 100 - total flux cleaned = 0.0140582 Jy ! Component: 150 - total flux cleaned = 0.0162423 Jy ! Component: 200 - total flux cleaned = 0.0175082 Jy ! Total flux subtracted in 200 components = 0.0175082 Jy ! Clean residual min=-0.004153 max=0.005299 Jy/beam ! Clean residual mean=-0.000034 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 0.193665 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 36 components and 0.193665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092607Jy sigma=0.000846 ! Fit after self-cal, rms=0.092602Jy sigma=0.000846 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.87 HN 0.98 KP 1.06 ! LA 1.07 MK 1.00* NL 0.95 OV 0.96 ! PT 1.17 SC 0.96 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.06 KP 0.99 ! LA 1.03 MK 1.00* NL 1.01 OV 0.98 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.20 HN 1.07 KP 0.90 ! LA 0.82 MK 1.00* NL 0.99 OV 0.95 ! PT 0.96 SC 1.07 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.06 HN 0.90 KP 1.01 ! LA 0.79 MK 1.00* NL 1.24 OV 1.03 ! PT 1.02 SC 0.96 ! ! ! Fit before self-cal, rms=0.092602Jy sigma=0.000846 ! Fit after self-cal, rms=0.088541Jy sigma=0.000818 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.466 mas, bmaj=12.6 mas, bpa=13.58 degrees ! Estimated noise=777.538 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00170594 Jy ! Component: 100 - total flux cleaned = -0.00196934 Jy ! Component: 150 - total flux cleaned = -0.00192999 Jy ! Component: 200 - total flux cleaned = -0.00190038 Jy ! Total flux subtracted in 200 components = -0.00190038 Jy ! Clean residual min=-0.003562 max=0.004687 Jy/beam ! Clean residual mean=-0.000030 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 0.191764 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.191764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088465Jy sigma=0.000818 ! Fit after self-cal, rms=0.088446Jy sigma=0.000817 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088446Jy sigma=0.000817 ! Fit after self-cal, rms=0.094089Jy sigma=0.000799 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.459 mas, bmaj=12.58 mas, bpa=13.46 degrees ! Estimated noise=776.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000840997 Jy ! Component: 100 - total flux cleaned = 0.00100433 Jy ! Component: 150 - total flux cleaned = 0.00103147 Jy ! Component: 200 - total flux cleaned = 0.00107909 Jy ! Total flux subtracted in 200 components = 0.00107909 Jy ! Clean residual min=-0.002472 max=0.002432 Jy/beam ! Clean residual mean=-0.000004 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.192843 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.192843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094075Jy sigma=0.000798 ! Fit after self-cal, rms=0.094309Jy sigma=0.000798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.42525e-05 Jy ! Component: 100 - total flux cleaned = 7.65601e-05 Jy ! Component: 150 - total flux cleaned = 0.000111876 Jy ! Component: 200 - total flux cleaned = 0.000161366 Jy ! Total flux subtracted in 200 components = 0.000161366 Jy ! Clean residual min=-0.002456 max=0.002428 Jy/beam ! Clean residual mean=-0.000004 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.193005 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.193005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094304Jy sigma=0.000798 ! Fit after self-cal, rms=0.094305Jy sigma=0.000798 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094305Jy sigma=0.000798 ! Fit after self-cal, rms=0.107505Jy sigma=0.000800 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.44 mas, bmaj=12.54 mas, bpa=13.45 degrees ! Estimated noise=782.997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178704 Jy ! Component: 100 - total flux cleaned = 0.00268805 Jy ! Component: 150 - total flux cleaned = 0.00324041 Jy ! Component: 200 - total flux cleaned = 0.00354684 Jy ! Total flux subtracted in 200 components = 0.00354684 Jy ! Clean residual min=-0.002600 max=0.002546 Jy/beam ! Clean residual mean=0.000006 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.196552 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 87 components and 0.196552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107429Jy sigma=0.000799 ! Fit after self-cal, rms=0.107630Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.84623e-06 Jy ! Component: 100 - total flux cleaned = 7.74973e-05 Jy ! Component: 150 - total flux cleaned = 0.000109346 Jy ! Component: 200 - total flux cleaned = 0.000139602 Jy ! Total flux subtracted in 200 components = 0.000139602 Jy ! Clean residual min=-0.002573 max=0.002557 Jy/beam ! Clean residual mean=0.000006 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.196691 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 95 components and 0.196691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107629Jy sigma=0.000799 ! Fit after self-cal, rms=0.107631Jy sigma=0.000799 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107631Jy sigma=0.000799 ! Fit after self-cal, rms=0.109350Jy sigma=0.000799 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.795 mas, bmaj=15.76 mas, bpa=10.44 degrees ! Estimated noise=893.726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189918 Jy ! Component: 100 - total flux cleaned = 0.00278805 Jy ! Component: 150 - total flux cleaned = 0.00331276 Jy ! Component: 200 - total flux cleaned = 0.003565 Jy ! Total flux subtracted in 200 components = 0.003565 Jy ! Clean residual min=-0.002659 max=0.002736 Jy/beam ! Clean residual mean=0.000009 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.200256 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 127 components and 0.200256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109274Jy sigma=0.000799 ! Fit after self-cal, rms=0.109277Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.99528e-05 Jy ! Component: 100 - total flux cleaned = 0.000119128 Jy ! Component: 150 - total flux cleaned = 0.000172421 Jy ! Component: 200 - total flux cleaned = 0.000212674 Jy ! Total flux subtracted in 200 components = 0.000212674 Jy ! Clean residual min=-0.002635 max=0.002735 Jy/beam ! Clean residual mean=0.000008 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.200469 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 128 components and 0.200469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109275Jy sigma=0.000799 ! Fit after self-cal, rms=0.109275Jy sigma=0.000799 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.428 mas, bmaj=12.5 mas, bpa=13.42 degrees ! Estimated noise=789.106 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.428 x 12.5 at 13.42 degrees (North through East) ! Clean map min=-0.0025144 max=0.18665 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.54 mas, bmaj=11.23 mas, bpa=15.1 degrees ! Estimated noise=1087.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.145413 Jy ! Component: 100 - total flux cleaned = 0.177244 Jy ! Component: 150 - total flux cleaned = 0.187148 Jy ! Component: 200 - total flux cleaned = 0.19183 Jy ! Total flux subtracted in 200 components = 0.19183 Jy ! Clean residual min=-0.003907 max=0.003940 Jy/beam ! Clean residual mean=0.000005 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.19183 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.19183 Jy ! Inverting map and beam ! Estimated beam: bmin=4.428 mas, bmaj=12.5 mas, bpa=13.42 degrees ! Estimated noise=789.106 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00348193 Jy ! Component: 100 - total flux cleaned = 0.00549333 Jy ! Component: 150 - total flux cleaned = 0.00669657 Jy ! Component: 200 - total flux cleaned = 0.00742265 Jy ! Total flux subtracted in 200 components = 0.00742265 Jy ! Clean residual min=-0.002651 max=0.002568 Jy/beam ! Clean residual mean=0.000008 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.199252 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 39 components and 0.199252 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.795 mas, bmaj=15.76 mas, bpa=10.44 degrees ! Estimated noise=893.726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00088678 Jy ! Component: 100 - total flux cleaned = 0.00116767 Jy ! Component: 150 - total flux cleaned = 0.00123975 Jy ! Component: 200 - total flux cleaned = 0.00129005 Jy ! Total flux subtracted in 200 components = 0.00129005 Jy ! Clean residual min=-0.002646 max=0.002759 Jy/beam ! Clean residual mean=0.000008 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.200542 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.42055e-05 Jy ! Component: 100 - total flux cleaned = 5.50861e-05 Jy ! Component: 150 - total flux cleaned = 6.52367e-05 Jy ! Component: 200 - total flux cleaned = 8.44209e-05 Jy ! Total flux subtracted in 200 components = 8.44209e-05 Jy ! Clean residual min=-0.002637 max=0.002774 Jy/beam ! Clean residual mean=0.000008 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.200627 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 65 components and 0.200627 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.428 mas, bmaj=12.5 mas, bpa=13.42 degrees ! Estimated noise=789.106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000374836 Jy ! Component: 100 - total flux cleaned = -0.0004673 Jy ! Component: 150 - total flux cleaned = -0.000526562 Jy ! Component: 200 - total flux cleaned = -0.000539882 Jy ! Total flux subtracted in 200 components = -0.000539882 Jy ! Clean residual min=-0.002611 max=0.002581 Jy/beam ! Clean residual mean=0.000006 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.200087 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 78 components and 0.200087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109301Jy sigma=0.000799 ! Fit after self-cal, rms=0.109309Jy sigma=0.000799 wmodel J1153-1105_S_2014_08_05_pus_map.mod ! Writing 78 model components to file: J1153-1105_S_2014_08_05_pus_map.mod wobs J1153-1105_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1153-1105_S_2014_08_05_pus_uvs.fits wwins J1153-1105_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J1153-1105_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000424559 Jy ! Component: 100 - total flux cleaned = 0.000902942 Jy ! Component: 150 - total flux cleaned = 0.00142914 Jy ! Component: 200 - total flux cleaned = 0.00192477 Jy ! Component: 250 - total flux cleaned = 0.00214365 Jy ! Component: 300 - total flux cleaned = 0.00224862 Jy ! Component: 350 - total flux cleaned = 0.00231725 Jy ! Component: 400 - total flux cleaned = 0.00248044 Jy ! Component: 450 - total flux cleaned = 0.00260659 Jy ! Component: 500 - total flux cleaned = 0.00260738 Jy ! Component: 550 - total flux cleaned = 0.0026974 Jy ! Component: 600 - total flux cleaned = 0.00272649 Jy ! Component: 650 - total flux cleaned = 0.00275418 Jy ! Component: 700 - total flux cleaned = 0.00278219 Jy ! Component: 750 - total flux cleaned = 0.00283634 Jy ! Component: 800 - total flux cleaned = 0.00286278 Jy ! Component: 850 - total flux cleaned = 0.00283688 Jy ! Component: 900 - total flux cleaned = 0.00288915 Jy ! Component: 950 - total flux cleaned = 0.00288929 Jy ! Component: 1000 - total flux cleaned = 0.00296424 Jy ! Component: 1050 - total flux cleaned = 0.00296391 Jy ! Component: 1100 - total flux cleaned = 0.00289123 Jy ! Component: 1150 - total flux cleaned = 0.00289111 Jy ! Component: 1200 - total flux cleaned = 0.0028912 Jy ! Component: 1250 - total flux cleaned = 0.00284538 Jy ! Component: 1300 - total flux cleaned = 0.0028452 Jy ! Component: 1350 - total flux cleaned = 0.00275565 Jy ! Component: 1400 - total flux cleaned = 0.00273359 Jy ! Component: 1450 - total flux cleaned = 0.00279894 Jy ! Component: 1500 - total flux cleaned = 0.00279908 Jy ! Component: 1550 - total flux cleaned = 0.00286307 Jy ! Component: 1600 - total flux cleaned = 0.00294731 Jy ! Component: 1650 - total flux cleaned = 0.00296786 Jy ! Component: 1700 - total flux cleaned = 0.00300899 Jy ! Component: 1750 - total flux cleaned = 0.00311 Jy ! Component: 1800 - total flux cleaned = 0.00310985 Jy ! Component: 1850 - total flux cleaned = 0.00314976 Jy ! Component: 1900 - total flux cleaned = 0.00314972 Jy ! Component: 1950 - total flux cleaned = 0.00326655 Jy ! Component: 2000 - total flux cleaned = 0.00324723 Jy ! Component: 2050 - total flux cleaned = 0.00328549 Jy ! Component: 2100 - total flux cleaned = 0.00330442 Jy ! Component: 2150 - total flux cleaned = 0.00330437 Jy ! Component: 2200 - total flux cleaned = 0.0033232 Jy ! Component: 2250 - total flux cleaned = 0.00335995 Jy ! Component: 2300 - total flux cleaned = 0.00337802 Jy ! Component: 2350 - total flux cleaned = 0.00339611 Jy ! Component: 2400 - total flux cleaned = 0.00343183 Jy ! Component: 2450 - total flux cleaned = 0.00346722 Jy ! Component: 2500 - total flux cleaned = 0.00343209 Jy ! Component: 2550 - total flux cleaned = 0.00344974 Jy ! Component: 2600 - total flux cleaned = 0.0034324 Jy ! Component: 2650 - total flux cleaned = 0.00346671 Jy ! Component: 2700 - total flux cleaned = 0.0034836 Jy ! Component: 2750 - total flux cleaned = 0.00351706 Jy ! Component: 2800 - total flux cleaned = 0.00353374 Jy ! Component: 2850 - total flux cleaned = 0.00355021 Jy ! Component: 2900 - total flux cleaned = 0.00356679 Jy ! Component: 2950 - total flux cleaned = 0.00359949 Jy ! Component: 3000 - total flux cleaned = 0.0035996 Jy ! Component: 3050 - total flux cleaned = 0.00366424 Jy ! Component: 3100 - total flux cleaned = 0.00364827 Jy ! Component: 3150 - total flux cleaned = 0.00361638 Jy ! Component: 3200 - total flux cleaned = 0.00361647 Jy ! Component: 3250 - total flux cleaned = 0.0036482 Jy ! Component: 3300 - total flux cleaned = 0.00372642 Jy ! Component: 3350 - total flux cleaned = 0.00372633 Jy ! Component: 3400 - total flux cleaned = 0.0037108 Jy ! Component: 3450 - total flux cleaned = 0.00375692 Jy ! Component: 3500 - total flux cleaned = 0.00377228 Jy ! Component: 3550 - total flux cleaned = 0.00381798 Jy ! Component: 3600 - total flux cleaned = 0.00383305 Jy ! Component: 3650 - total flux cleaned = 0.00380286 Jy ! Component: 3700 - total flux cleaned = 0.00387794 Jy ! Component: 3750 - total flux cleaned = 0.00386305 Jy ! Component: 3800 - total flux cleaned = 0.00389293 Jy ! Component: 3850 - total flux cleaned = 0.00386326 Jy ! Component: 3900 - total flux cleaned = 0.00392236 Jy ! Component: 3950 - total flux cleaned = 0.00393708 Jy ! Component: 4000 - total flux cleaned = 0.00398113 Jy ! Component: 4050 - total flux cleaned = 0.00401035 Jy ! Total flux subtracted in 4096 components = 0.00399583 Jy ! Clean residual min=-0.000986 max=0.000868 Jy/beam ! Clean residual mean=0.000002 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.204083 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 392 components and 0.204083 Jy ![Exited script file: muppet] wmap "J1153-1105_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.428 x 12.5 at 13.42 degrees (North through East) ! Clean map min=-0.0018503 max=0.18674 Jy/beam ! Writing clean map to FITS file: J1153-1105_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.186738 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000305791 device "J1153-1105_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1153-1105_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.491261 0.491261 0.982523 1.96505 3.93009 7.86018 15.7204 31.4407 62.8814 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.186 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.428 x 12.5 at 13.42 degrees (North through East) ! Clean map min=-0.0018503 max=0.18674 Jy/beam quit ! Quitting program ! Log file J1153-1105_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:26:20 2016