! Started logfile: J1151-1723_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:26:04 2016 obs J1151-1723_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1151-1723_S_2014_08_05_pus_uva.fits ! AN table 1: 91 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.624176 visibilities/baseline/integration-bin. ! Found source: J1151-1723 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 10224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1151-1723_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.686385Jy sigma=0.006573 ! Fit after self-cal, rms=0.618873Jy sigma=0.005897 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=12.2 mas, bpa=13.91 degrees ! Estimated noise=1090.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.291191 Jy ! Component: 100 - total flux cleaned = 0.41427 Jy ! Total flux subtracted in 100 components = 0.41427 Jy ! Clean residual min=-0.037629 max=0.073453 Jy/beam ! Clean residual mean=0.000212 rms=0.010817 Jy/beam ! Combined flux in latest and established models = 0.41427 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.41427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182511Jy sigma=0.001617 ! Fit after self-cal, rms=0.181552Jy sigma=0.001609 ! Inverting map ! Added new window around map position (-5.5, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0792568 Jy ! Component: 100 - total flux cleaned = 0.123642 Jy ! Total flux subtracted in 100 components = 0.123642 Jy ! Clean residual min=-0.020141 max=0.025518 Jy/beam ! Clean residual mean=0.000086 rms=0.005440 Jy/beam ! Combined flux in latest and established models = 0.537912 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 38 components and 0.537912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133040Jy sigma=0.001158 ! Fit after self-cal, rms=0.131335Jy sigma=0.001141 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.030826 Jy ! Component: 100 - total flux cleaned = 0.0475448 Jy ! Total flux subtracted in 100 components = 0.0475448 Jy ! Clean residual min=-0.012613 max=0.014812 Jy/beam ! Clean residual mean=0.000040 rms=0.003677 Jy/beam ! Combined flux in latest and established models = 0.585457 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 58 components and 0.585456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121936Jy sigma=0.001072 ! Fit after self-cal, rms=0.121393Jy sigma=0.001067 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.587 mas, bmaj=14.09 mas, bpa=12.98 degrees ! Estimated noise=744.039 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125224 Jy ! Component: 100 - total flux cleaned = 0.0186409 Jy ! Component: 150 - total flux cleaned = 0.0213993 Jy ! Component: 200 - total flux cleaned = 0.0222737 Jy ! Total flux subtracted in 200 components = 0.0222737 Jy ! Clean residual min=-0.012274 max=0.014366 Jy/beam ! Clean residual mean=0.000109 rms=0.003903 Jy/beam ! Combined flux in latest and established models = 0.60773 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 84 components and 0.60773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119371Jy sigma=0.001060 ! Fit after self-cal, rms=0.119279Jy sigma=0.001059 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.88 HN 0.87 KP 1.03 ! LA 1.07 MK 1.00* NL 1.31 OV 0.96 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.05 HN 0.98 KP 1.08 ! LA 1.02 MK 1.00* NL 1.30 OV 1.00 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.18 HN 1.05 KP 0.87 ! LA 0.82 MK 1.00* NL 0.99 OV 0.93 ! PT 1.05 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.06 HN 0.99 KP 0.86 ! LA 0.79 MK 1.00* NL 1.12 OV 0.99 ! PT 1.02 SC 1.00 ! ! ! Fit before self-cal, rms=0.119279Jy sigma=0.001059 ! Fit after self-cal, rms=0.096386Jy sigma=0.000855 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.592 mas, bmaj=14.15 mas, bpa=12.74 degrees ! Estimated noise=753.079 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00494887 Jy ! Component: 100 - total flux cleaned = -0.00568209 Jy ! Component: 150 - total flux cleaned = -0.0060778 Jy ! Component: 200 - total flux cleaned = -0.00641431 Jy ! Total flux subtracted in 200 components = -0.00641431 Jy ! Clean residual min=-0.007245 max=0.007326 Jy/beam ! Clean residual mean=-0.000018 rms=0.002006 Jy/beam ! Combined flux in latest and established models = 0.601316 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 102 components and 0.601316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095218Jy sigma=0.000847 ! Fit after self-cal, rms=0.095228Jy sigma=0.000847 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095228Jy sigma=0.000847 ! Fit after self-cal, rms=0.089442Jy sigma=0.000800 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.595 mas, bmaj=14.1 mas, bpa=12.63 degrees ! Estimated noise=746.227 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001071 Jy ! Component: 100 - total flux cleaned = 0.00127217 Jy ! Component: 150 - total flux cleaned = 0.00149764 Jy ! Component: 200 - total flux cleaned = 0.00155323 Jy ! Total flux subtracted in 200 components = 0.00155323 Jy ! Clean residual min=-0.003031 max=0.003248 Jy/beam ! Clean residual mean=0.000005 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.602869 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 119 components and 0.602869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089350Jy sigma=0.000799 ! Fit after self-cal, rms=0.089362Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193177 Jy ! Component: 100 - total flux cleaned = 0.00282444 Jy ! Component: 150 - total flux cleaned = 0.00323692 Jy ! Component: 200 - total flux cleaned = 0.00352412 Jy ! Total flux subtracted in 200 components = 0.00352412 Jy ! Clean residual min=-0.002567 max=0.002783 Jy/beam ! Clean residual mean=-0.000010 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.606393 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 141 components and 0.606393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089190Jy sigma=0.000797 ! Fit after self-cal, rms=0.089180Jy sigma=0.000797 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089180Jy sigma=0.000797 ! Fit after self-cal, rms=0.089113Jy sigma=0.000797 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.595 mas, bmaj=14.1 mas, bpa=12.59 degrees ! Estimated noise=745.643 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123563 Jy ! Component: 100 - total flux cleaned = 0.00184601 Jy ! Component: 150 - total flux cleaned = 0.00219828 Jy ! Component: 200 - total flux cleaned = 0.00235669 Jy ! Total flux subtracted in 200 components = 0.00235669 Jy ! Clean residual min=-0.002468 max=0.002609 Jy/beam ! Clean residual mean=-0.000007 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.60875 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 154 components and 0.60875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089061Jy sigma=0.000797 ! Fit after self-cal, rms=0.089058Jy sigma=0.000797 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (37, 75.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120789 Jy ! Component: 100 - total flux cleaned = 0.00147842 Jy ! Component: 150 - total flux cleaned = 0.00160979 Jy ! Component: 200 - total flux cleaned = 0.00189381 Jy ! Total flux subtracted in 200 components = 0.00189381 Jy ! Clean residual min=-0.002135 max=0.002283 Jy/beam ! Clean residual mean=-0.000008 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.610643 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 184 components and 0.610643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088981Jy sigma=0.000796 ! Fit after self-cal, rms=0.088978Jy sigma=0.000796 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088978Jy sigma=0.000796 ! Fit after self-cal, rms=0.088991Jy sigma=0.000796 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.924 mas, bmaj=17.98 mas, bpa=11.79 degrees ! Estimated noise=831.667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000249097 Jy ! Component: 100 - total flux cleaned = 0.000463952 Jy ! Component: 150 - total flux cleaned = 0.000572445 Jy ! Component: 200 - total flux cleaned = 0.000571796 Jy ! Total flux subtracted in 200 components = 0.000571796 Jy ! Clean residual min=-0.002272 max=0.001853 Jy/beam ! Clean residual mean=-0.000000 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.611215 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 210 components and 0.611215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088975Jy sigma=0.000796 ! Fit after self-cal, rms=0.088974Jy sigma=0.000796 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135793 Jy ! Component: 100 - total flux cleaned = 0.000112412 Jy ! Component: 150 - total flux cleaned = 6.9963e-05 Jy ! Component: 200 - total flux cleaned = 7.05873e-05 Jy ! Total flux subtracted in 200 components = 7.05873e-05 Jy ! Clean residual min=-0.002233 max=0.001820 Jy/beam ! Clean residual mean=-0.000000 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.611286 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 221 components and 0.611286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088964Jy sigma=0.000796 ! Fit after self-cal, rms=0.088963Jy sigma=0.000796 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.596 mas, bmaj=14.1 mas, bpa=12.58 degrees ! Estimated noise=745.681 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.596 x 14.1 at 12.58 degrees (North through East) ! Clean map min=-0.0021104 max=0.35417 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.611 mas, bmaj=12.18 mas, bpa=13.43 degrees ! Estimated noise=1091.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.294555 Jy ! Component: 100 - total flux cleaned = 0.422392 Jy ! Component: 150 - total flux cleaned = 0.493989 Jy ! Component: 200 - total flux cleaned = 0.5354 Jy ! Total flux subtracted in 200 components = 0.5354 Jy ! Clean residual min=-0.011730 max=0.020982 Jy/beam ! Clean residual mean=0.000079 rms=0.003522 Jy/beam ! Combined flux in latest and established models = 0.5354 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.5354 Jy ! Inverting map and beam ! Estimated beam: bmin=4.596 mas, bmaj=14.1 mas, bpa=12.58 degrees ! Estimated noise=745.681 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0317269 Jy ! Component: 100 - total flux cleaned = 0.048604 Jy ! Component: 150 - total flux cleaned = 0.0588514 Jy ! Component: 200 - total flux cleaned = 0.0654528 Jy ! Total flux subtracted in 200 components = 0.0654528 Jy ! Clean residual min=-0.003401 max=0.004161 Jy/beam ! Clean residual mean=0.000036 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.600853 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 84 components and 0.600853 Jy ! Inverting map ! Added new window around map position (25.5, -52.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00474023 Jy ! Component: 100 - total flux cleaned = 0.00821867 Jy ! Component: 150 - total flux cleaned = 0.00979553 Jy ! Component: 200 - total flux cleaned = 0.0100948 Jy ! Total flux subtracted in 200 components = 0.0100948 Jy ! Clean residual min=-0.002664 max=0.002773 Jy/beam ! Clean residual mean=0.000003 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.610948 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 113 components and 0.610948 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.924 mas, bmaj=17.98 mas, bpa=11.79 degrees ! Estimated noise=831.667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000744015 Jy ! Component: 100 - total flux cleaned = 0.00041316 Jy ! Component: 150 - total flux cleaned = 5.61724e-05 Jy ! Component: 200 - total flux cleaned = -0.00021544 Jy ! Total flux subtracted in 200 components = -0.00021544 Jy ! Clean residual min=-0.002207 max=0.002224 Jy/beam ! Clean residual mean=0.000002 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.610732 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102259 Jy ! Component: 100 - total flux cleaned = -0.000148795 Jy ! Component: 150 - total flux cleaned = -0.000190425 Jy ! Component: 200 - total flux cleaned = -0.000190308 Jy ! Total flux subtracted in 200 components = -0.000190308 Jy ! Clean residual min=-0.001976 max=0.002109 Jy/beam ! Clean residual mean=0.000003 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.610542 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 170 components and 0.610542 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.596 mas, bmaj=14.1 mas, bpa=12.58 degrees ! Estimated noise=745.681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000611212 Jy ! Component: 100 - total flux cleaned = 0.000555493 Jy ! Component: 150 - total flux cleaned = 0.000378347 Jy ! Component: 200 - total flux cleaned = 0.00015815 Jy ! Total flux subtracted in 200 components = 0.00015815 Jy ! Clean residual min=-0.002137 max=0.002364 Jy/beam ! Clean residual mean=0.000001 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.6107 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 196 components and 0.6107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089056Jy sigma=0.000796 ! Fit after self-cal, rms=0.089035Jy sigma=0.000796 wmodel J1151-1723_S_2014_08_05_pus_map.mod ! Writing 196 model components to file: J1151-1723_S_2014_08_05_pus_map.mod wobs J1151-1723_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1151-1723_S_2014_08_05_pus_uvs.fits wwins J1151-1723_S_2014_08_05_pus_map.win ! wwins: Wrote 5 windows to J1151-1723_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000626532 Jy ! Component: 100 - total flux cleaned = 0.000807564 Jy ! Component: 150 - total flux cleaned = 0.000808847 Jy ! Component: 200 - total flux cleaned = 0.000683817 Jy ! Component: 250 - total flux cleaned = 0.000595084 Jy ! Component: 300 - total flux cleaned = 0.000422487 Jy ! Component: 350 - total flux cleaned = 0.000255801 Jy ! Component: 400 - total flux cleaned = 6.7484e-05 Jy ! Component: 450 - total flux cleaned = -0.000116298 Jy ! Component: 500 - total flux cleaned = -0.000243862 Jy ! Component: 550 - total flux cleaned = -0.000393117 Jy ! Component: 600 - total flux cleaned = -0.000513855 Jy ! Component: 650 - total flux cleaned = -0.000584546 Jy ! Component: 700 - total flux cleaned = -0.00079134 Jy ! Component: 750 - total flux cleaned = -0.000858326 Jy ! Component: 800 - total flux cleaned = -0.000990966 Jy ! Component: 850 - total flux cleaned = -0.00112103 Jy ! Component: 900 - total flux cleaned = -0.0012486 Jy ! Component: 950 - total flux cleaned = -0.0013739 Jy ! Component: 1000 - total flux cleaned = -0.00151739 Jy ! Component: 1050 - total flux cleaned = -0.00161835 Jy ! Component: 1100 - total flux cleaned = -0.00171767 Jy ! Component: 1150 - total flux cleaned = -0.0018153 Jy ! Component: 1200 - total flux cleaned = -0.0018924 Jy ! Component: 1250 - total flux cleaned = -0.00194901 Jy ! Component: 1300 - total flux cleaned = -0.00196797 Jy ! Component: 1350 - total flux cleaned = -0.00205941 Jy ! Component: 1400 - total flux cleaned = -0.00211338 Jy ! Component: 1450 - total flux cleaned = -0.00214898 Jy ! Component: 1500 - total flux cleaned = -0.00221878 Jy ! Component: 1550 - total flux cleaned = -0.00223598 Jy ! Component: 1600 - total flux cleaned = -0.00226992 Jy ! Component: 1650 - total flux cleaned = -0.00226995 Jy ! Component: 1700 - total flux cleaned = -0.00225336 Jy ! Component: 1750 - total flux cleaned = -0.0023021 Jy ! Component: 1800 - total flux cleaned = -0.00226968 Jy ! Component: 1850 - total flux cleaned = -0.00223785 Jy ! Component: 1900 - total flux cleaned = -0.00226975 Jy ! Component: 1950 - total flux cleaned = -0.0023164 Jy ! Component: 2000 - total flux cleaned = -0.00228536 Jy ! Component: 2050 - total flux cleaned = -0.00228521 Jy ! Component: 2100 - total flux cleaned = -0.00219471 Jy ! Component: 2150 - total flux cleaned = -0.00220979 Jy ! Component: 2200 - total flux cleaned = -0.00222463 Jy ! Component: 2250 - total flux cleaned = -0.00218091 Jy ! Component: 2300 - total flux cleaned = -0.00219531 Jy ! Component: 2350 - total flux cleaned = -0.00213826 Jy ! Component: 2400 - total flux cleaned = -0.00216666 Jy ! Component: 2450 - total flux cleaned = -0.00215272 Jy ! Component: 2500 - total flux cleaned = -0.00215276 Jy ! Component: 2550 - total flux cleaned = -0.00215293 Jy ! Component: 2600 - total flux cleaned = -0.00219341 Jy ! Component: 2650 - total flux cleaned = -0.00221995 Jy ! Component: 2700 - total flux cleaned = -0.00223291 Jy ! Component: 2750 - total flux cleaned = -0.00223286 Jy ! Component: 2800 - total flux cleaned = -0.00224599 Jy ! Component: 2850 - total flux cleaned = -0.00224581 Jy ! Component: 2900 - total flux cleaned = -0.00225849 Jy ! Component: 2950 - total flux cleaned = -0.00222046 Jy ! Component: 3000 - total flux cleaned = -0.00217055 Jy ! Component: 3050 - total flux cleaned = -0.00217055 Jy ! Component: 3100 - total flux cleaned = -0.00218297 Jy ! Component: 3150 - total flux cleaned = -0.00218286 Jy ! Component: 3200 - total flux cleaned = -0.00218291 Jy ! Component: 3250 - total flux cleaned = -0.00218293 Jy ! Component: 3300 - total flux cleaned = -0.00215917 Jy ! Component: 3350 - total flux cleaned = -0.00217084 Jy ! Component: 3400 - total flux cleaned = -0.00213563 Jy ! Component: 3450 - total flux cleaned = -0.00210081 Jy ! Component: 3500 - total flux cleaned = -0.00212388 Jy ! Component: 3550 - total flux cleaned = -0.00211244 Jy ! Component: 3600 - total flux cleaned = -0.00210125 Jy ! Component: 3650 - total flux cleaned = -0.00206749 Jy ! Component: 3700 - total flux cleaned = -0.00207862 Jy ! Component: 3750 - total flux cleaned = -0.00205647 Jy ! Component: 3800 - total flux cleaned = -0.00205654 Jy ! Component: 3850 - total flux cleaned = -0.00202388 Jy ! Component: 3900 - total flux cleaned = -0.00205647 Jy ! Component: 3950 - total flux cleaned = -0.00203486 Jy ! Component: 4000 - total flux cleaned = -0.00198139 Jy ! Component: 4050 - total flux cleaned = -0.00198147 Jy ! Total flux subtracted in 4096 components = -0.00197103 Jy ! Clean residual min=-0.000793 max=0.000700 Jy/beam ! Clean residual mean=0.000003 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.608729 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 480 components and 0.608729 Jy ![Exited script file: muppet] wmap "J1151-1723_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.596 x 14.1 at 12.58 degrees (North through East) ! Clean map min=-0.0016286 max=0.35632 Jy/beam ! Writing clean map to FITS file: J1151-1723_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.356321 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00019873 device "J1151-1723_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1151-1723_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.167319 0.167319 0.334637 0.669274 1.33855 2.6771 5.35419 10.7084 21.4168 42.8335 85.6671 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.356 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.596 x 14.1 at 12.58 degrees (North through East) ! Clean map min=-0.0016286 max=0.35632 Jy/beam quit ! Quitting program ! Log file J1151-1723_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:26:09 2016