! Started logfile: J1141-1216_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:25:31 2016 obs J1141-1216_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1141-1216_S_2014_08_05_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.55225 visibilities/baseline/integration-bin. ! Found source: J1141-1216 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 12028 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1141-1216_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 431 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 411 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 408 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 393 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.950340Jy sigma=0.009358 ! Fit after self-cal, rms=0.916601Jy sigma=0.009023 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.559 mas, bmaj=11.52 mas, bpa=15.67 degrees ! Estimated noise=1250.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0679059 Jy ! Component: 100 - total flux cleaned = 0.084709 Jy ! Total flux subtracted in 100 components = 0.084709 Jy ! Clean residual min=-0.006715 max=0.007673 Jy/beam ! Clean residual mean=-0.000033 rms=0.001987 Jy/beam ! Combined flux in latest and established models = 0.0847091 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0847091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087179Jy sigma=0.000805 ! Fit after self-cal, rms=0.086853Jy sigma=0.000802 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.243 mas, bmaj=12.38 mas, bpa=13.46 degrees ! Estimated noise=683.228 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00766527 Jy ! Component: 100 - total flux cleaned = 0.0115163 Jy ! Component: 150 - total flux cleaned = 0.013859 Jy ! Component: 200 - total flux cleaned = 0.0153258 Jy ! Total flux subtracted in 200 components = 0.0153258 Jy ! Clean residual min=-0.004395 max=0.003926 Jy/beam ! Clean residual mean=-0.000056 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.100035 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 43 components and 0.100035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086165Jy sigma=0.000796 ! Fit after self-cal, rms=0.086127Jy sigma=0.000795 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.80 HN 1.01 KP 1.01 ! LA 1.03 MK 1.00* NL 1.03 OV 0.93 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.95 HN 1.02 KP 1.02 ! LA 1.05 MK 1.00* NL 1.11 OV 0.99 ! PT 1.14 SC 1.06 ! ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.13 HN 1.01 KP 0.97 ! LA 0.96 MK 1.00* NL 1.01 OV 1.01 ! PT 1.06 SC 0.95 ! ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 0.91 HN 0.95 KP 0.88 ! LA 0.83 MK 1.00* NL 1.21 OV 1.00 ! PT 1.01 SC 0.93 ! ! ! Fit before self-cal, rms=0.086127Jy sigma=0.000795 ! Fit after self-cal, rms=0.084382Jy sigma=0.000788 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.216 mas, bmaj=12.39 mas, bpa=13.51 degrees ! Estimated noise=683.819 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000284904 Jy ! Component: 100 - total flux cleaned = -8.11247e-05 Jy ! Component: 150 - total flux cleaned = -0.000108132 Jy ! Component: 200 - total flux cleaned = -0.000160135 Jy ! Total flux subtracted in 200 components = -0.000160135 Jy ! Clean residual min=-0.004555 max=0.003608 Jy/beam ! Clean residual mean=-0.000052 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.0998747 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.0998747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084345Jy sigma=0.000788 ! Fit after self-cal, rms=0.084328Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084328Jy sigma=0.000787 ! Fit after self-cal, rms=0.091244Jy sigma=0.000777 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.193 mas, bmaj=12.39 mas, bpa=13.43 degrees ! Estimated noise=682.873 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293615 Jy ! Component: 100 - total flux cleaned = 0.000245409 Jy ! Component: 150 - total flux cleaned = 0.000206933 Jy ! Component: 200 - total flux cleaned = 0.000174635 Jy ! Total flux subtracted in 200 components = 0.000174635 Jy ! Clean residual min=-0.002421 max=0.002657 Jy/beam ! Clean residual mean=-0.000013 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.100049 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.100049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091190Jy sigma=0.000777 ! Fit after self-cal, rms=0.091546Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (127, -33). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014935 Jy ! Component: 100 - total flux cleaned = 0.00173593 Jy ! Component: 150 - total flux cleaned = 0.00170495 Jy ! Component: 200 - total flux cleaned = 0.00167833 Jy ! Total flux subtracted in 200 components = 0.00167833 Jy ! Clean residual min=-0.002289 max=0.002212 Jy/beam ! Clean residual mean=-0.000012 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.101728 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 0.101728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091487Jy sigma=0.000776 ! Fit after self-cal, rms=0.091474Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091474Jy sigma=0.000776 ! Fit after self-cal, rms=0.093486Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.186 mas, bmaj=12.38 mas, bpa=13.44 degrees ! Estimated noise=683.068 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000679457 Jy ! Component: 100 - total flux cleaned = 0.000616841 Jy ! Component: 150 - total flux cleaned = 0.000589533 Jy ! Component: 200 - total flux cleaned = 0.000615214 Jy ! Total flux subtracted in 200 components = 0.000615214 Jy ! Clean residual min=-0.002323 max=0.002248 Jy/beam ! Clean residual mean=-0.000011 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.102343 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 102 components and 0.102343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093460Jy sigma=0.000775 ! Fit after self-cal, rms=0.093532Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020033 Jy ! Component: 100 - total flux cleaned = 0.000223503 Jy ! Component: 150 - total flux cleaned = 0.000244982 Jy ! Component: 200 - total flux cleaned = 0.000245141 Jy ! Total flux subtracted in 200 components = 0.000245141 Jy ! Clean residual min=-0.002298 max=0.002214 Jy/beam ! Clean residual mean=-0.000011 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.102588 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 114 components and 0.102588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093521Jy sigma=0.000775 ! Fit after self-cal, rms=0.093521Jy sigma=0.000775 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093521Jy sigma=0.000775 ! Fit after self-cal, rms=0.094054Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.542 mas, bmaj=15.87 mas, bpa=8.082 degrees ! Estimated noise=783.893 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012595 Jy ! Component: 100 - total flux cleaned = 0.00010101 Jy ! Component: 150 - total flux cleaned = 2.23934e-05 Jy ! Component: 200 - total flux cleaned = -2.9298e-05 Jy ! Total flux subtracted in 200 components = -2.9298e-05 Jy ! Clean residual min=-0.002623 max=0.002325 Jy/beam ! Clean residual mean=-0.000017 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.102559 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 124 components and 0.102559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094039Jy sigma=0.000775 ! Fit after self-cal, rms=0.094048Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011242 Jy ! Component: 100 - total flux cleaned = 8.13684e-05 Jy ! Component: 150 - total flux cleaned = 3.78596e-05 Jy ! Component: 200 - total flux cleaned = 1.0926e-05 Jy ! Total flux subtracted in 200 components = 1.0926e-05 Jy ! Clean residual min=-0.002635 max=0.002283 Jy/beam ! Clean residual mean=-0.000017 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.10257 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 131 components and 0.10257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094042Jy sigma=0.000775 ! Fit after self-cal, rms=0.094038Jy sigma=0.000775 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.181 mas, bmaj=12.37 mas, bpa=13.45 degrees ! Estimated noise=683.128 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.181 x 12.37 at 13.45 degrees (North through East) ! Clean map min=-0.002534 max=0.085233 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=11.52 mas, bpa=15.65 degrees ! Estimated noise=1255.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0675328 Jy ! Component: 100 - total flux cleaned = 0.0859595 Jy ! Component: 150 - total flux cleaned = 0.0938563 Jy ! Component: 200 - total flux cleaned = 0.0976153 Jy ! Total flux subtracted in 200 components = 0.0976153 Jy ! Clean residual min=-0.004799 max=0.004662 Jy/beam ! Clean residual mean=-0.000013 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.0976154 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0976154 Jy ! Inverting map and beam ! Estimated beam: bmin=4.181 mas, bmaj=12.37 mas, bpa=13.45 degrees ! Estimated noise=683.128 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331029 Jy ! Component: 100 - total flux cleaned = 0.00428663 Jy ! Component: 150 - total flux cleaned = 0.0050111 Jy ! Component: 200 - total flux cleaned = 0.00539591 Jy ! Total flux subtracted in 200 components = 0.00539591 Jy ! Clean residual min=-0.002447 max=0.002032 Jy/beam ! Clean residual mean=-0.000010 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.103011 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 56 components and 0.103011 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.542 mas, bmaj=15.87 mas, bpa=8.082 degrees ! Estimated noise=783.893 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379906 Jy ! Component: 100 - total flux cleaned = 0.000419654 Jy ! Component: 150 - total flux cleaned = 0.000291906 Jy ! Component: 200 - total flux cleaned = 0.000207634 Jy ! Total flux subtracted in 200 components = 0.000207634 Jy ! Clean residual min=-0.002581 max=0.002072 Jy/beam ! Clean residual mean=-0.000017 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.103219 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102394 Jy ! Component: 100 - total flux cleaned = -0.000170678 Jy ! Component: 150 - total flux cleaned = -0.000232383 Jy ! Component: 200 - total flux cleaned = -0.000251675 Jy ! Total flux subtracted in 200 components = -0.000251675 Jy ! Clean residual min=-0.002487 max=0.002107 Jy/beam ! Clean residual mean=-0.000016 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.102967 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 91 components and 0.102967 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.181 mas, bmaj=12.37 mas, bpa=13.45 degrees ! Estimated noise=683.128 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123964 Jy ! Component: 100 - total flux cleaned = -0.000229919 Jy ! Component: 150 - total flux cleaned = -0.000197381 Jy ! Component: 200 - total flux cleaned = -0.000197137 Jy ! Total flux subtracted in 200 components = -0.000197137 Jy ! Clean residual min=-0.002129 max=0.002037 Jy/beam ! Clean residual mean=-0.000010 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.10277 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 112 components and 0.10277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094000Jy sigma=0.000775 ! Fit after self-cal, rms=0.093985Jy sigma=0.000775 wmodel J1141-1216_S_2014_08_05_pus_map.mod ! Writing 112 model components to file: J1141-1216_S_2014_08_05_pus_map.mod wobs J1141-1216_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1141-1216_S_2014_08_05_pus_uvs.fits wwins J1141-1216_S_2014_08_05_pus_map.win ! wwins: Wrote 3 windows to J1141-1216_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000429174 Jy ! Component: 100 - total flux cleaned = -0.000430968 Jy ! Component: 150 - total flux cleaned = -0.000492685 Jy ! Component: 200 - total flux cleaned = -0.000374949 Jy ! Component: 250 - total flux cleaned = -0.00031747 Jy ! Component: 300 - total flux cleaned = -0.000210341 Jy ! Component: 350 - total flux cleaned = -0.000261888 Jy ! Component: 400 - total flux cleaned = -0.000262297 Jy ! Component: 450 - total flux cleaned = -0.000262522 Jy ! Component: 500 - total flux cleaned = -0.000238658 Jy ! Component: 550 - total flux cleaned = -0.000147936 Jy ! Component: 600 - total flux cleaned = -0.000103867 Jy ! Component: 650 - total flux cleaned = -6.11122e-05 Jy ! Component: 700 - total flux cleaned = 2.11012e-06 Jy ! Component: 750 - total flux cleaned = 2.29002e-05 Jy ! Component: 800 - total flux cleaned = 8.29734e-05 Jy ! Component: 850 - total flux cleaned = 8.24013e-05 Jy ! Component: 900 - total flux cleaned = 0.000101535 Jy ! Component: 950 - total flux cleaned = 8.20504e-05 Jy ! Component: 1000 - total flux cleaned = 0.000156196 Jy ! Component: 1050 - total flux cleaned = 0.000174582 Jy ! Component: 1100 - total flux cleaned = 0.000192494 Jy ! Component: 1150 - total flux cleaned = 0.000175141 Jy ! Component: 1200 - total flux cleaned = 0.000227708 Jy ! Component: 1250 - total flux cleaned = 0.000227626 Jy ! Component: 1300 - total flux cleaned = 0.000227014 Jy ! Component: 1350 - total flux cleaned = 0.000193415 Jy ! Component: 1400 - total flux cleaned = 0.000193266 Jy ! Component: 1450 - total flux cleaned = 0.000111486 Jy ! Component: 1500 - total flux cleaned = 0.000111348 Jy ! Component: 1550 - total flux cleaned = 4.76467e-05 Jy ! Component: 1600 - total flux cleaned = 6.31389e-05 Jy ! Component: 1650 - total flux cleaned = -3.02744e-05 Jy ! Component: 1700 - total flux cleaned = 3.10035e-05 Jy ! Component: 1750 - total flux cleaned = 3.08059e-05 Jy ! Component: 1800 - total flux cleaned = 6.68209e-07 Jy ! Component: 1850 - total flux cleaned = 1.55433e-05 Jy ! Component: 1900 - total flux cleaned = 4.52117e-05 Jy ! Component: 1950 - total flux cleaned = 0.000103765 Jy ! Component: 2000 - total flux cleaned = 7.47364e-05 Jy ! Component: 2050 - total flux cleaned = 0.000132028 Jy ! Component: 2100 - total flux cleaned = 0.000146047 Jy ! Component: 2150 - total flux cleaned = 0.000146145 Jy ! Component: 2200 - total flux cleaned = 0.000188187 Jy ! Component: 2250 - total flux cleaned = 0.000188172 Jy ! Component: 2300 - total flux cleaned = 0.000174404 Jy ! Component: 2350 - total flux cleaned = 0.000256532 Jy ! Component: 2400 - total flux cleaned = 0.000256375 Jy ! Component: 2450 - total flux cleaned = 0.000269674 Jy ! Component: 2500 - total flux cleaned = 0.000256118 Jy ! Component: 2550 - total flux cleaned = 0.000282681 Jy ! Component: 2600 - total flux cleaned = 0.000282708 Jy ! Component: 2650 - total flux cleaned = 0.000321929 Jy ! Component: 2700 - total flux cleaned = 0.000283126 Jy ! Component: 2750 - total flux cleaned = 0.00034747 Jy ! Component: 2800 - total flux cleaned = 0.000347311 Jy ! Component: 2850 - total flux cleaned = 0.000385406 Jy ! Component: 2900 - total flux cleaned = 0.00041075 Jy ! Component: 2950 - total flux cleaned = 0.000398238 Jy ! Component: 3000 - total flux cleaned = 0.000435551 Jy ! Component: 3050 - total flux cleaned = 0.000410873 Jy ! Component: 3100 - total flux cleaned = 0.000398747 Jy ! Component: 3150 - total flux cleaned = 0.000435407 Jy ! Component: 3200 - total flux cleaned = 0.000411115 Jy ! Component: 3250 - total flux cleaned = 0.000459344 Jy ! Component: 3300 - total flux cleaned = 0.000435463 Jy ! Component: 3350 - total flux cleaned = 0.000471219 Jy ! Component: 3400 - total flux cleaned = 0.000459277 Jy ! Component: 3450 - total flux cleaned = 0.000459345 Jy ! Component: 3500 - total flux cleaned = 0.000471052 Jy ! Component: 3550 - total flux cleaned = 0.000447703 Jy ! Component: 3600 - total flux cleaned = 0.000424506 Jy ! Component: 3650 - total flux cleaned = 0.000482363 Jy ! Component: 3700 - total flux cleaned = 0.000459409 Jy ! Component: 3750 - total flux cleaned = 0.000447942 Jy ! Component: 3800 - total flux cleaned = 0.000448045 Jy ! Component: 3850 - total flux cleaned = 0.000436707 Jy ! Component: 3900 - total flux cleaned = 0.000425391 Jy ! Component: 3950 - total flux cleaned = 0.000447929 Jy ! Component: 4000 - total flux cleaned = 0.000447957 Jy ! Component: 4050 - total flux cleaned = 0.000425602 Jy ! Total flux subtracted in 4096 components = 0.000459053 Jy ! Clean residual min=-0.000784 max=0.000612 Jy/beam ! Clean residual mean=-0.000006 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.103229 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 418 components and 0.103229 Jy ![Exited script file: muppet] wmap "J1141-1216_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.181 x 12.37 at 13.45 degrees (North through East) ! Clean map min=-0.0020758 max=0.085291 Jy/beam ! Writing clean map to FITS file: J1141-1216_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0852909 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214999 device "J1141-1216_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1141-1216_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.756232 0.756232 1.51246 3.02493 6.04985 12.0997 24.1994 48.3988 96.7977 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.085 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.181 x 12.37 at 13.45 degrees (North through East) ! Clean map min=-0.0020758 max=0.085291 Jy/beam quit ! Quitting program ! Log file J1141-1216_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:25:36 2016