! Started logfile: J1057-2433_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:24:31 2016 obs J1057-2433_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1057-2433_S_2014_08_05_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.76495 visibilities/baseline/integration-bin. ! Found source: J1057-2433 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 16936 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1057-2433_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.945655Jy sigma=0.007445 ! Fit after self-cal, rms=0.882076Jy sigma=0.006965 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=10.67 mas, bpa=18.35 degrees ! Estimated noise=1100.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0852617 Jy ! Component: 100 - total flux cleaned = 0.132538 Jy ! Total flux subtracted in 100 components = 0.132538 Jy ! Clean residual min=-0.011608 max=0.028862 Jy/beam ! Clean residual mean=-0.000113 rms=0.005178 Jy/beam ! Combined flux in latest and established models = 0.132538 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.132538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163929Jy sigma=0.001114 ! Fit after self-cal, rms=0.162903Jy sigma=0.001108 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.023 mas, bmaj=12.43 mas, bpa=16.36 degrees ! Estimated noise=698.218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0565049 Jy ! Component: 100 - total flux cleaned = 0.0890567 Jy ! Component: 150 - total flux cleaned = 0.109659 Jy ! Component: 200 - total flux cleaned = 0.123302 Jy ! Total flux subtracted in 200 components = 0.123302 Jy ! Clean residual min=-0.010584 max=0.022063 Jy/beam ! Clean residual mean=-0.000208 rms=0.004341 Jy/beam ! Combined flux in latest and established models = 0.25584 Jy ! Performing phase self-cal ! Adding 80 model components to the UV plane model. ! The established model now contains 110 components and 0.25584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142111Jy sigma=0.000879 ! Fit after self-cal, rms=0.141170Jy sigma=0.000872 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.86 HN 1.29 KP 1.05 ! LA 1.04 MK 1.00* NL 1.18 OV 1.01 ! PT 0.85 SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 1.30 KP 0.99 ! LA 1.01 MK 1.00* NL 1.60 OV 1.05 ! PT 0.84 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.10 HN 1.36 KP 0.90 ! LA 0.81 MK 1.00* NL 1.79 OV 0.98 ! PT 0.83 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00 HN 1.28 KP 0.90 ! LA 0.75 MK 1.00* NL 1.84 OV 1.04 ! PT 0.86 SC 0.89 ! ! ! Fit before self-cal, rms=0.141170Jy sigma=0.000872 ! Fit after self-cal, rms=0.167831Jy sigma=0.000825 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.028 mas, bmaj=13.24 mas, bpa=17.72 degrees ! Estimated noise=736.299 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00294255 Jy ! Component: 100 - total flux cleaned = 0.0036053 Jy ! Component: 150 - total flux cleaned = 0.00407988 Jy ! Component: 200 - total flux cleaned = 0.00435595 Jy ! Total flux subtracted in 200 components = 0.00435595 Jy ! Clean residual min=-0.007837 max=0.012528 Jy/beam ! Clean residual mean=-0.000132 rms=0.003239 Jy/beam ! Combined flux in latest and established models = 0.260196 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 121 components and 0.260196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167735Jy sigma=0.000824 ! Fit after self-cal, rms=0.168958Jy sigma=0.000822 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168958Jy sigma=0.000822 ! Fit after self-cal, rms=0.150114Jy sigma=0.000813 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.976 mas, bmaj=12.67 mas, bpa=16.82 degrees ! Estimated noise=721.224 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118145 Jy ! Component: 100 - total flux cleaned = 0.00152193 Jy ! Component: 150 - total flux cleaned = 0.00176422 Jy ! Component: 200 - total flux cleaned = 0.00198847 Jy ! Total flux subtracted in 200 components = 0.00198847 Jy ! Clean residual min=-0.007120 max=0.011059 Jy/beam ! Clean residual mean=-0.000083 rms=0.002987 Jy/beam ! Combined flux in latest and established models = 0.262185 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 129 components and 0.262185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150064Jy sigma=0.000812 ! Fit after self-cal, rms=0.150086Jy sigma=0.000812 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000246659 Jy ! Component: 100 - total flux cleaned = 0.00054198 Jy ! Component: 150 - total flux cleaned = 0.000755118 Jy ! Component: 200 - total flux cleaned = 0.000903456 Jy ! Total flux subtracted in 200 components = 0.000903456 Jy ! Clean residual min=-0.007196 max=0.010701 Jy/beam ! Clean residual mean=-0.000081 rms=0.002970 Jy/beam ! Combined flux in latest and established models = 0.263088 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 131 components and 0.263088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150048Jy sigma=0.000811 ! Fit after self-cal, rms=0.150040Jy sigma=0.000811 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150040Jy sigma=0.000811 ! Fit after self-cal, rms=0.146797Jy sigma=0.000811 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.98 mas, bmaj=12.55 mas, bpa=16.71 degrees ! Estimated noise=718.632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000823287 Jy ! Component: 100 - total flux cleaned = 0.00110696 Jy ! Component: 150 - total flux cleaned = 0.00126379 Jy ! Component: 200 - total flux cleaned = 0.0014587 Jy ! Total flux subtracted in 200 components = 0.0014587 Jy ! Clean residual min=-0.007086 max=0.010651 Jy/beam ! Clean residual mean=-0.000081 rms=0.002941 Jy/beam ! Combined flux in latest and established models = 0.264547 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 131 components and 0.264547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146760Jy sigma=0.000811 ! Fit after self-cal, rms=0.146701Jy sigma=0.000811 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172813 Jy ! Component: 100 - total flux cleaned = 0.00037813 Jy ! Component: 150 - total flux cleaned = 0.000565855 Jy ! Component: 200 - total flux cleaned = 0.000697314 Jy ! Total flux subtracted in 200 components = 0.000697314 Jy ! Clean residual min=-0.007148 max=0.010545 Jy/beam ! Clean residual mean=-0.000080 rms=0.002927 Jy/beam ! Combined flux in latest and established models = 0.265244 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 134 components and 0.265244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146672Jy sigma=0.000810 ! Fit after self-cal, rms=0.146670Jy sigma=0.000810 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146670Jy sigma=0.000810 ! Fit after self-cal, rms=0.144102Jy sigma=0.000810 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.53 mas, bmaj=19.95 mas, bpa=9.305 degrees ! Estimated noise=808.944 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028172 Jy ! Component: 100 - total flux cleaned = 0.00311419 Jy ! Component: 150 - total flux cleaned = 0.00345468 Jy ! Component: 200 - total flux cleaned = 0.00383335 Jy ! Total flux subtracted in 200 components = 0.00383335 Jy ! Clean residual min=-0.010121 max=0.015082 Jy/beam ! Clean residual mean=-0.000128 rms=0.004450 Jy/beam ! Combined flux in latest and established models = 0.269077 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 137 components and 0.269078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144083Jy sigma=0.000810 ! Fit after self-cal, rms=0.143926Jy sigma=0.000810 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219369 Jy ! Component: 100 - total flux cleaned = 0.00059646 Jy ! Component: 150 - total flux cleaned = 0.000863612 Jy ! Component: 200 - total flux cleaned = 0.00111338 Jy ! Total flux subtracted in 200 components = 0.00111338 Jy ! Clean residual min=-0.009959 max=0.015044 Jy/beam ! Clean residual mean=-0.000124 rms=0.004406 Jy/beam ! Combined flux in latest and established models = 0.270191 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 139 components and 0.270191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143937Jy sigma=0.000810 ! Fit after self-cal, rms=0.143913Jy sigma=0.000809 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.987 mas, bmaj=12.54 mas, bpa=16.78 degrees ! Estimated noise=718.911 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.987 x 12.54 at 16.78 degrees (North through East) ! Clean map min=-0.0071957 max=0.10049 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=10.55 mas, bpa=18.72 degrees ! Estimated noise=1137.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0880913 Jy ! Component: 100 - total flux cleaned = 0.138673 Jy ! Component: 150 - total flux cleaned = 0.17208 Jy ! Component: 200 - total flux cleaned = 0.195803 Jy ! Total flux subtracted in 200 components = 0.195803 Jy ! Clean residual min=-0.008387 max=0.015786 Jy/beam ! Clean residual mean=-0.000073 rms=0.003016 Jy/beam ! Combined flux in latest and established models = 0.195803 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 73 model components to the UV plane model. ! The established model now contains 73 components and 0.195803 Jy ! Inverting map and beam ! Estimated beam: bmin=3.987 mas, bmaj=12.54 mas, bpa=16.78 degrees ! Estimated noise=718.911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0276617 Jy ! Component: 100 - total flux cleaned = 0.0436563 Jy ! Component: 150 - total flux cleaned = 0.053526 Jy ! Component: 200 - total flux cleaned = 0.0596952 Jy ! Total flux subtracted in 200 components = 0.0596952 Jy ! Clean residual min=-0.007722 max=0.011883 Jy/beam ! Clean residual mean=-0.000090 rms=0.003073 Jy/beam ! Combined flux in latest and established models = 0.255498 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 106 components and 0.255498 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.53 mas, bmaj=19.95 mas, bpa=9.305 degrees ! Estimated noise=808.944 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00756069 Jy ! Component: 100 - total flux cleaned = 0.0102005 Jy ! Component: 150 - total flux cleaned = 0.010628 Jy ! Component: 200 - total flux cleaned = 0.0110141 Jy ! Total flux subtracted in 200 components = 0.0110141 Jy ! Clean residual min=-0.010600 max=0.015725 Jy/beam ! Clean residual mean=-0.000131 rms=0.004499 Jy/beam ! Combined flux in latest and established models = 0.266512 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000449007 Jy ! Component: 100 - total flux cleaned = 0.000702722 Jy ! Component: 150 - total flux cleaned = 0.00102103 Jy ! Component: 200 - total flux cleaned = 0.00132435 Jy ! Total flux subtracted in 200 components = 0.00132435 Jy ! Clean residual min=-0.010471 max=0.015701 Jy/beam ! Clean residual mean=-0.000127 rms=0.004463 Jy/beam ! Combined flux in latest and established models = 0.267836 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 116 components and 0.267836 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.987 mas, bmaj=12.54 mas, bpa=16.78 degrees ! Estimated noise=718.911 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00225748 Jy ! Component: 100 - total flux cleaned = -0.00247888 Jy ! Component: 150 - total flux cleaned = -0.0026555 Jy ! Component: 200 - total flux cleaned = -0.00272436 Jy ! Total flux subtracted in 200 components = -0.00272436 Jy ! Clean residual min=-0.007326 max=0.011250 Jy/beam ! Clean residual mean=-0.000079 rms=0.002942 Jy/beam ! Combined flux in latest and established models = 0.265112 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 122 components and 0.265112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144174Jy sigma=0.000812 ! Fit after self-cal, rms=0.144240Jy sigma=0.000811 wmodel J1057-2433_S_2014_08_05_pus_map.mod ! Writing 122 model components to file: J1057-2433_S_2014_08_05_pus_map.mod wobs J1057-2433_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1057-2433_S_2014_08_05_pus_uvs.fits wwins J1057-2433_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J1057-2433_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00476602 Jy ! Component: 100 - total flux cleaned = 0.00893627 Jy ! Component: 150 - total flux cleaned = 0.0127275 Jy ! Component: 200 - total flux cleaned = 0.0162592 Jy ! Component: 250 - total flux cleaned = 0.019593 Jy ! Component: 300 - total flux cleaned = 0.0227608 Jy ! Component: 350 - total flux cleaned = 0.0255391 Jy ! Component: 400 - total flux cleaned = 0.0281975 Jy ! Component: 450 - total flux cleaned = 0.0307465 Jy ! Component: 500 - total flux cleaned = 0.0332999 Jy ! Component: 550 - total flux cleaned = 0.0356548 Jy ! Component: 600 - total flux cleaned = 0.0378231 Jy ! Component: 650 - total flux cleaned = 0.0397238 Jy ! Component: 700 - total flux cleaned = 0.0416549 Jy ! Component: 750 - total flux cleaned = 0.043527 Jy ! Component: 800 - total flux cleaned = 0.0449136 Jy ! Component: 850 - total flux cleaned = 0.0461796 Jy ! Component: 900 - total flux cleaned = 0.0475796 Jy ! Component: 950 - total flux cleaned = 0.0489436 Jy ! Component: 1000 - total flux cleaned = 0.0500387 Jy ! Component: 1050 - total flux cleaned = 0.0512623 Jy ! Component: 1100 - total flux cleaned = 0.0523076 Jy ! Component: 1150 - total flux cleaned = 0.052966 Jy ! Component: 1200 - total flux cleaned = 0.0536801 Jy ! Component: 1250 - total flux cleaned = 0.0541705 Jy ! Component: 1300 - total flux cleaned = 0.0545832 Jy ! Component: 1350 - total flux cleaned = 0.0552573 Jy ! Component: 1400 - total flux cleaned = 0.0554542 Jy ! Component: 1450 - total flux cleaned = 0.0559086 Jy ! Component: 1500 - total flux cleaned = 0.0563558 Jy ! Component: 1550 - total flux cleaned = 0.0568565 Jy ! Component: 1600 - total flux cleaned = 0.0572247 Jy ! Component: 1650 - total flux cleaned = 0.0578287 Jy ! Component: 1700 - total flux cleaned = 0.0582444 Jy ! Component: 1750 - total flux cleaned = 0.0587107 Jy ! Component: 1800 - total flux cleaned = 0.05917 Jy ! Component: 1850 - total flux cleaned = 0.0597341 Jy ! Component: 1900 - total flux cleaned = 0.0601221 Jy ! Component: 1950 - total flux cleaned = 0.0606694 Jy ! Component: 2000 - total flux cleaned = 0.0610452 Jy ! Component: 2050 - total flux cleaned = 0.0614691 Jy ! Component: 2100 - total flux cleaned = 0.0619908 Jy ! Component: 2150 - total flux cleaned = 0.0622979 Jy ! Component: 2200 - total flux cleaned = 0.0627532 Jy ! Component: 2250 - total flux cleaned = 0.0632514 Jy ! Component: 2300 - total flux cleaned = 0.0635936 Jy ! Component: 2350 - total flux cleaned = 0.0638835 Jy ! Component: 2400 - total flux cleaned = 0.0643127 Jy ! Component: 2450 - total flux cleaned = 0.0645476 Jy ! Component: 2500 - total flux cleaned = 0.0648724 Jy ! Component: 2550 - total flux cleaned = 0.0650565 Jy ! Component: 2600 - total flux cleaned = 0.0654633 Jy ! Component: 2650 - total flux cleaned = 0.065775 Jy ! Component: 2700 - total flux cleaned = 0.0660826 Jy ! Component: 2750 - total flux cleaned = 0.0662124 Jy ! Component: 2800 - total flux cleaned = 0.0664689 Jy ! Component: 2850 - total flux cleaned = 0.0667224 Jy ! Component: 2900 - total flux cleaned = 0.0670558 Jy ! Component: 2950 - total flux cleaned = 0.0672616 Jy ! Component: 3000 - total flux cleaned = 0.0674243 Jy ! Component: 3050 - total flux cleaned = 0.0676656 Jy ! Component: 3100 - total flux cleaned = 0.067943 Jy ! Component: 3150 - total flux cleaned = 0.0680998 Jy ! Component: 3200 - total flux cleaned = 0.0683321 Jy ! Component: 3250 - total flux cleaned = 0.068447 Jy ! Component: 3300 - total flux cleaned = 0.0685226 Jy ! Component: 3350 - total flux cleaned = 0.0687099 Jy ! Component: 3400 - total flux cleaned = 0.0688581 Jy ! Component: 3450 - total flux cleaned = 0.0689312 Jy ! Component: 3500 - total flux cleaned = 0.069076 Jy ! Component: 3550 - total flux cleaned = 0.0692181 Jy ! Component: 3600 - total flux cleaned = 0.0693245 Jy ! Component: 3650 - total flux cleaned = 0.0695348 Jy ! Component: 3700 - total flux cleaned = 0.069604 Jy ! Component: 3750 - total flux cleaned = 0.069707 Jy ! Component: 3800 - total flux cleaned = 0.0698426 Jy ! Component: 3850 - total flux cleaned = 0.069876 Jy ! Component: 3900 - total flux cleaned = 0.0700423 Jy ! Component: 3950 - total flux cleaned = 0.0701738 Jy ! Component: 4000 - total flux cleaned = 0.0702709 Jy ! Component: 4050 - total flux cleaned = 0.0703672 Jy ! Total flux subtracted in 4096 components = 0.0703987 Jy ! Clean residual min=-0.001804 max=0.001783 Jy/beam ! Clean residual mean=0.000004 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.33551 Jy keep ! Adding 565 model components to the UV plane model. ! The established model now contains 687 components and 0.335511 Jy ![Exited script file: muppet] wmap "J1057-2433_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.987 x 12.54 at 16.78 degrees (North through East) ! Clean map min=-0.0034115 max=0.10045 Jy/beam ! Writing clean map to FITS file: J1057-2433_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.100449 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000701702 device "J1057-2433_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1057-2433_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.09569 2.09569 4.19139 8.38278 16.7656 33.5311 67.0622 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.1 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.987 x 12.54 at 16.78 degrees (North through East) ! Clean map min=-0.0034115 max=0.10045 Jy/beam quit ! Quitting program ! Log file J1057-2433_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:24:37 2016