! Started logfile: J1045-2927_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:24:20 2016 obs J1045-2927_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1045-2927_S_2014_08_05_pus_uva.fits ! AN table 1: 111 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.69009 visibilities/baseline/integration-bin. ! Found source: J1045-2927 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 13788 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1045-2927_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.928429Jy sigma=0.007191 ! Fit after self-cal, rms=0.840624Jy sigma=0.006486 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.029 mas, bmaj=10.37 mas, bpa=19.57 degrees ! Estimated noise=1370.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112336 Jy ! Component: 100 - total flux cleaned = 0.16281 Jy ! Total flux subtracted in 100 components = 0.16281 Jy ! Clean residual min=-0.019441 max=0.043601 Jy/beam ! Clean residual mean=-0.000039 rms=0.006167 Jy/beam ! Combined flux in latest and established models = 0.16281 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.16281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181118Jy sigma=0.001185 ! Fit after self-cal, rms=0.180869Jy sigma=0.001181 ! Inverting map ! Added new window around map position (-10.5, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0438312 Jy ! Component: 100 - total flux cleaned = 0.0745679 Jy ! Total flux subtracted in 100 components = 0.0745679 Jy ! Clean residual min=-0.014851 max=0.018154 Jy/beam ! Clean residual mean=-0.000033 rms=0.004327 Jy/beam ! Combined flux in latest and established models = 0.237378 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 62 components and 0.237378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161316Jy sigma=0.000996 ! Fit after self-cal, rms=0.159946Jy sigma=0.000987 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.063 mas, bmaj=12.76 mas, bpa=16.89 degrees ! Estimated noise=789.581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0428983 Jy ! Component: 100 - total flux cleaned = 0.0687953 Jy ! Component: 150 - total flux cleaned = 0.0857354 Jy ! Component: 200 - total flux cleaned = 0.0970278 Jy ! Total flux subtracted in 200 components = 0.0970278 Jy ! Clean residual min=-0.010536 max=0.011232 Jy/beam ! Clean residual mean=-0.000082 rms=0.002727 Jy/beam ! Combined flux in latest and established models = 0.334406 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 114 components and 0.334406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145443Jy sigma=0.000859 ! Fit after self-cal, rms=0.144605Jy sigma=0.000854 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.91 HN 0.92 KP 1.00 ! LA 1.18 MK 1.00* NL 1.25 OV 0.97 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 HN 1.20 KP 0.97 ! LA 1.16 MK 1.00* NL 0.79 OV 1.00 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.17 HN 1.01 KP 0.85 ! LA 0.91 MK 1.00* NL 1.01 OV 0.96 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 1.09 KP 0.82 ! LA 0.87 MK 1.00* NL 1.09 OV 0.97 ! PT 1.01 SC 0.97 ! ! ! Fit before self-cal, rms=0.144605Jy sigma=0.000854 ! Fit after self-cal, rms=0.130210Jy sigma=0.000823 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.08 mas, bmaj=12.87 mas, bpa=16.94 degrees ! Estimated noise=771.589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139937 Jy ! Component: 100 - total flux cleaned = 0.000555599 Jy ! Component: 150 - total flux cleaned = 2.4184e-05 Jy ! Component: 200 - total flux cleaned = -0.00011984 Jy ! Total flux subtracted in 200 components = -0.00011984 Jy ! Clean residual min=-0.006684 max=0.007437 Jy/beam ! Clean residual mean=-0.000124 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 0.334286 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 136 components and 0.334286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129489Jy sigma=0.000818 ! Fit after self-cal, rms=0.129386Jy sigma=0.000817 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129386Jy sigma=0.000817 ! Fit after self-cal, rms=0.110416Jy sigma=0.000798 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.086 mas, bmaj=12.9 mas, bpa=16.93 degrees ! Estimated noise=757.508 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133451 Jy ! Component: 100 - total flux cleaned = 0.00147078 Jy ! Component: 150 - total flux cleaned = 0.00101888 Jy ! Component: 200 - total flux cleaned = 0.00061149 Jy ! Total flux subtracted in 200 components = 0.00061149 Jy ! Clean residual min=-0.004331 max=0.006624 Jy/beam ! Clean residual mean=-0.000042 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.334898 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 159 components and 0.334898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110077Jy sigma=0.000795 ! Fit after self-cal, rms=0.110004Jy sigma=0.000795 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-30.5, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00626935 Jy ! Component: 100 - total flux cleaned = 0.00996436 Jy ! Component: 150 - total flux cleaned = 0.0123804 Jy ! Component: 200 - total flux cleaned = 0.0135465 Jy ! Total flux subtracted in 200 components = 0.0135465 Jy ! Clean residual min=-0.003629 max=0.003248 Jy/beam ! Clean residual mean=-0.000020 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.348444 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 197 components and 0.348444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109605Jy sigma=0.000791 ! Fit after self-cal, rms=0.109536Jy sigma=0.000790 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109536Jy sigma=0.000790 ! Fit after self-cal, rms=0.108093Jy sigma=0.000790 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.067 mas, bmaj=12.82 mas, bpa=17.01 degrees ! Estimated noise=749.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022401 Jy ! Component: 100 - total flux cleaned = 0.00350446 Jy ! Component: 150 - total flux cleaned = 0.00409328 Jy ! Component: 200 - total flux cleaned = 0.00454496 Jy ! Total flux subtracted in 200 components = 0.00454496 Jy ! Clean residual min=-0.002923 max=0.002739 Jy/beam ! Clean residual mean=-0.000016 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.352989 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 223 components and 0.352989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107947Jy sigma=0.000789 ! Fit after self-cal, rms=0.107916Jy sigma=0.000789 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000552825 Jy ! Component: 100 - total flux cleaned = 0.00106221 Jy ! Component: 150 - total flux cleaned = 0.00138492 Jy ! Component: 200 - total flux cleaned = 0.00162385 Jy ! Total flux subtracted in 200 components = 0.00162385 Jy ! Clean residual min=-0.002756 max=0.002611 Jy/beam ! Clean residual mean=-0.000014 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.354613 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 242 components and 0.354613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107832Jy sigma=0.000788 ! Fit after self-cal, rms=0.107810Jy sigma=0.000788 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107810Jy sigma=0.000788 ! Fit after self-cal, rms=0.106883Jy sigma=0.000788 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.612 mas, bmaj=21.54 mas, bpa=7.105 degrees ! Estimated noise=848.848 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124178 Jy ! Component: 100 - total flux cleaned = 0.00166289 Jy ! Component: 150 - total flux cleaned = 0.00188536 Jy ! Component: 200 - total flux cleaned = 0.00188578 Jy ! Total flux subtracted in 200 components = 0.00188578 Jy ! Clean residual min=-0.002614 max=0.002308 Jy/beam ! Clean residual mean=-0.000021 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.356499 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 276 components and 0.356499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106840Jy sigma=0.000788 ! Fit after self-cal, rms=0.106820Jy sigma=0.000788 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030982 Jy ! Component: 100 - total flux cleaned = 0.000622499 Jy ! Component: 150 - total flux cleaned = 0.000660494 Jy ! Component: 200 - total flux cleaned = 0.000728738 Jy ! Total flux subtracted in 200 components = 0.000728738 Jy ! Clean residual min=-0.002490 max=0.002256 Jy/beam ! Clean residual mean=-0.000019 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.357228 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 293 components and 0.357228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106799Jy sigma=0.000787 ! Fit after self-cal, rms=0.106791Jy sigma=0.000787 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.058 mas, bmaj=12.76 mas, bpa=16.99 degrees ! Estimated noise=744.96 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.058 x 12.76 at 16.99 degrees (North through East) ! Clean map min=-0.006946 max=0.14276 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=10.38 mas, bpa=19.62 degrees ! Estimated noise=1289.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107378 Jy ! Component: 100 - total flux cleaned = 0.164135 Jy ! Component: 150 - total flux cleaned = 0.203376 Jy ! Component: 200 - total flux cleaned = 0.233422 Jy ! Total flux subtracted in 200 components = 0.233422 Jy ! Clean residual min=-0.009964 max=0.017584 Jy/beam ! Clean residual mean=-0.000037 rms=0.003530 Jy/beam ! Combined flux in latest and established models = 0.233422 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 56 model components to the UV plane model. ! The established model now contains 56 components and 0.233422 Jy ! Inverting map and beam ! Estimated beam: bmin=4.058 mas, bmaj=12.76 mas, bpa=16.99 degrees ! Estimated noise=744.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0383389 Jy ! Component: 100 - total flux cleaned = 0.0620297 Jy ! Component: 150 - total flux cleaned = 0.0772784 Jy ! Component: 200 - total flux cleaned = 0.0874184 Jy ! Total flux subtracted in 200 components = 0.0874184 Jy ! Clean residual min=-0.006282 max=0.005731 Jy/beam ! Clean residual mean=-0.000053 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 0.32084 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 125 components and 0.32084 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.612 mas, bmaj=21.54 mas, bpa=7.105 degrees ! Estimated noise=848.848 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103559 Jy ! Component: 100 - total flux cleaned = 0.017683 Jy ! Component: 150 - total flux cleaned = 0.0232358 Jy ! Component: 200 - total flux cleaned = 0.0257674 Jy ! Total flux subtracted in 200 components = 0.0257674 Jy ! Clean residual min=-0.003763 max=0.003711 Jy/beam ! Clean residual mean=-0.000041 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.346607 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171541 Jy ! Component: 100 - total flux cleaned = 0.00335833 Jy ! Component: 150 - total flux cleaned = 0.00480018 Jy ! Component: 200 - total flux cleaned = 0.00576403 Jy ! Total flux subtracted in 200 components = 0.00576403 Jy ! Clean residual min=-0.003250 max=0.003028 Jy/beam ! Clean residual mean=-0.000029 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.352371 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 206 components and 0.352372 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.058 mas, bmaj=12.76 mas, bpa=16.99 degrees ! Estimated noise=744.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000520447 Jy ! Component: 100 - total flux cleaned = 0.00109586 Jy ! Component: 150 - total flux cleaned = 0.00158472 Jy ! Component: 200 - total flux cleaned = 0.00159499 Jy ! Total flux subtracted in 200 components = 0.00159499 Jy ! Clean residual min=-0.003586 max=0.002891 Jy/beam ! Clean residual mean=-0.000016 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.353967 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 228 components and 0.353967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107009Jy sigma=0.000789 ! Fit after self-cal, rms=0.106816Jy sigma=0.000788 wmodel J1045-2927_S_2014_08_05_pus_map.mod ! Writing 228 model components to file: J1045-2927_S_2014_08_05_pus_map.mod wobs J1045-2927_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1045-2927_S_2014_08_05_pus_uvs.fits wwins J1045-2927_S_2014_08_05_pus_map.win ! wwins: Wrote 4 windows to J1045-2927_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196182 Jy ! Component: 100 - total flux cleaned = -0.000433721 Jy ! Component: 150 - total flux cleaned = -0.000609641 Jy ! Component: 200 - total flux cleaned = -0.000735831 Jy ! Component: 250 - total flux cleaned = -0.000853767 Jy ! Component: 300 - total flux cleaned = -0.00104409 Jy ! Component: 350 - total flux cleaned = -0.00137272 Jy ! Component: 400 - total flux cleaned = -0.00165352 Jy ! Component: 450 - total flux cleaned = -0.00182428 Jy ! Component: 500 - total flux cleaned = -0.00189002 Jy ! Component: 550 - total flux cleaned = -0.00195402 Jy ! Component: 600 - total flux cleaned = -0.00195371 Jy ! Component: 650 - total flux cleaned = -0.00204466 Jy ! Component: 700 - total flux cleaned = -0.00201435 Jy ! Component: 750 - total flux cleaned = -0.00207245 Jy ! Component: 800 - total flux cleaned = -0.00198578 Jy ! Component: 850 - total flux cleaned = -0.00201423 Jy ! Component: 900 - total flux cleaned = -0.00190345 Jy ! Component: 950 - total flux cleaned = -0.00193044 Jy ! Component: 1000 - total flux cleaned = -0.00190392 Jy ! Component: 1050 - total flux cleaned = -0.00200871 Jy ! Component: 1100 - total flux cleaned = -0.00205953 Jy ! Component: 1150 - total flux cleaned = -0.00208513 Jy ! Component: 1200 - total flux cleaned = -0.00213501 Jy ! Component: 1250 - total flux cleaned = -0.00215897 Jy ! Component: 1300 - total flux cleaned = -0.00218281 Jy ! Component: 1350 - total flux cleaned = -0.00223023 Jy ! Component: 1400 - total flux cleaned = -0.00227681 Jy ! Component: 1450 - total flux cleaned = -0.00236786 Jy ! Component: 1500 - total flux cleaned = -0.002277 Jy ! Component: 1550 - total flux cleaned = -0.00232184 Jy ! Component: 1600 - total flux cleaned = -0.00234357 Jy ! Component: 1650 - total flux cleaned = -0.00230023 Jy ! Component: 1700 - total flux cleaned = -0.0023429 Jy ! Component: 1750 - total flux cleaned = -0.00246877 Jy ! Component: 1800 - total flux cleaned = -0.00253061 Jy ! Component: 1850 - total flux cleaned = -0.00265301 Jy ! Component: 1900 - total flux cleaned = -0.0026126 Jy ! Component: 1950 - total flux cleaned = -0.00269265 Jy ! Component: 2000 - total flux cleaned = -0.0027123 Jy ! Component: 2050 - total flux cleaned = -0.0027513 Jy ! Component: 2100 - total flux cleaned = -0.00282841 Jy ! Component: 2150 - total flux cleaned = -0.00288521 Jy ! Component: 2200 - total flux cleaned = -0.0029229 Jy ! Component: 2250 - total flux cleaned = -0.00296011 Jy ! Component: 2300 - total flux cleaned = -0.00305164 Jy ! Component: 2350 - total flux cleaned = -0.00303363 Jy ! Component: 2400 - total flux cleaned = -0.00303395 Jy ! Component: 2450 - total flux cleaned = -0.00310534 Jy ! Component: 2500 - total flux cleaned = -0.00307073 Jy ! Component: 2550 - total flux cleaned = -0.00312311 Jy ! Component: 2600 - total flux cleaned = -0.00315737 Jy ! Component: 2650 - total flux cleaned = -0.00319132 Jy ! Component: 2700 - total flux cleaned = -0.00324169 Jy ! Component: 2750 - total flux cleaned = -0.00332466 Jy ! Component: 2800 - total flux cleaned = -0.00329173 Jy ! Component: 2850 - total flux cleaned = -0.0033571 Jy ! Component: 2900 - total flux cleaned = -0.00337304 Jy ! Component: 2950 - total flux cleaned = -0.003405 Jy ! Component: 3000 - total flux cleaned = -0.00340485 Jy ! Component: 3050 - total flux cleaned = -0.00337337 Jy ! Component: 3100 - total flux cleaned = -0.00337331 Jy ! Component: 3150 - total flux cleaned = -0.00334244 Jy ! Component: 3200 - total flux cleaned = -0.00335759 Jy ! Component: 3250 - total flux cleaned = -0.00334241 Jy ! Component: 3300 - total flux cleaned = -0.00331241 Jy ! Component: 3350 - total flux cleaned = -0.00329738 Jy ! Component: 3400 - total flux cleaned = -0.0032679 Jy ! Component: 3450 - total flux cleaned = -0.00326787 Jy ! Component: 3500 - total flux cleaned = -0.00322454 Jy ! Component: 3550 - total flux cleaned = -0.00321028 Jy ! Component: 3600 - total flux cleaned = -0.00322454 Jy ! Component: 3650 - total flux cleaned = -0.00322462 Jy ! Component: 3700 - total flux cleaned = -0.00316853 Jy ! Component: 3750 - total flux cleaned = -0.00314084 Jy ! Component: 3800 - total flux cleaned = -0.00311345 Jy ! Component: 3850 - total flux cleaned = -0.00307264 Jy ! Component: 3900 - total flux cleaned = -0.00311319 Jy ! Component: 3950 - total flux cleaned = -0.00307297 Jy ! Component: 4000 - total flux cleaned = -0.00301971 Jy ! Component: 4050 - total flux cleaned = -0.00299349 Jy ! Total flux subtracted in 4096 components = -0.00304578 Jy ! Clean residual min=-0.000742 max=0.000721 Jy/beam ! Clean residual mean=-0.000001 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.350921 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 503 components and 0.350921 Jy ![Exited script file: muppet] wmap "J1045-2927_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.058 x 12.76 at 16.99 degrees (North through East) ! Clean map min=-0.0056316 max=0.14314 Jy/beam ! Writing clean map to FITS file: J1045-2927_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.143145 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000249168 device "J1045-2927_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1045-2927_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.5222 0.5222 1.0444 2.0888 4.1776 8.35521 16.7104 33.4208 66.8417 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.143 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.058 x 12.76 at 16.99 degrees (North through East) ! Clean map min=-0.0056316 max=0.14314 Jy/beam quit ! Quitting program ! Log file J1045-2927_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:24:25 2016