! Started logfile: J1012-3740_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:23:52 2016 obs J1012-3740_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1012-3740_S_2014_08_05_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.608197 visibilities/baseline/integration-bin. ! Found source: J1012-3740 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 13356 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1012-3740_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.972951Jy sigma=0.006443 ! Fit after self-cal, rms=0.918397Jy sigma=0.006155 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=10.07 mas, bpa=17.98 degrees ! Estimated noise=1342.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0680231 Jy ! Component: 100 - total flux cleaned = 0.0834018 Jy ! Total flux subtracted in 100 components = 0.0834018 Jy ! Clean residual min=-0.004109 max=0.006240 Jy/beam ! Clean residual mean=-0.000028 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.0834018 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0834018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125541Jy sigma=0.000755 ! Fit after self-cal, rms=0.125210Jy sigma=0.000754 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.965 mas, bmaj=12.49 mas, bpa=15.42 degrees ! Estimated noise=934.911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.007947 Jy ! Component: 100 - total flux cleaned = 0.0116606 Jy ! Component: 150 - total flux cleaned = 0.0136088 Jy ! Component: 200 - total flux cleaned = 0.0146405 Jy ! Total flux subtracted in 200 components = 0.0146405 Jy ! Clean residual min=-0.002762 max=0.002940 Jy/beam ! Clean residual mean=0.000034 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.0980423 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 36 components and 0.0980423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124705Jy sigma=0.000751 ! Fit after self-cal, rms=0.124728Jy sigma=0.000750 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.83 HN 1.03 KP 1.02 ! LA 1.15 MK 1.00* NL 1.09 OV 0.99 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 1.03 KP 1.00 ! LA 1.04 MK 1.00* NL 1.08 OV 1.05 ! PT 1.07 SC 1.02 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.08 HN 1.04 KP 0.89 ! LA 0.83 MK 1.00* NL 1.04 OV 0.99 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.08 KP 0.86 ! LA 0.81 MK 1.00* NL 1.18 OV 0.96 ! PT 1.02 SC 1.01 ! ! ! Fit before self-cal, rms=0.124728Jy sigma=0.000750 ! Fit after self-cal, rms=0.125177Jy sigma=0.000747 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.964 mas, bmaj=12.58 mas, bpa=15.55 degrees ! Estimated noise=937.755 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025422 Jy ! Component: 100 - total flux cleaned = 0.000273719 Jy ! Component: 150 - total flux cleaned = 0.000272368 Jy ! Component: 200 - total flux cleaned = 0.000272391 Jy ! Total flux subtracted in 200 components = 0.000272391 Jy ! Clean residual min=-0.003277 max=0.002280 Jy/beam ! Clean residual mean=0.000044 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.0983147 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.0983147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125170Jy sigma=0.000747 ! Fit after self-cal, rms=0.125230Jy sigma=0.000747 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125230Jy sigma=0.000747 ! Fit after self-cal, rms=0.125719Jy sigma=0.000746 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.961 mas, bmaj=12.56 mas, bpa=15.54 degrees ! Estimated noise=937.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190477 Jy ! Component: 100 - total flux cleaned = 9.54629e-05 Jy ! Component: 150 - total flux cleaned = 1.7386e-05 Jy ! Component: 200 - total flux cleaned = -1.44623e-05 Jy ! Total flux subtracted in 200 components = -1.44623e-05 Jy ! Clean residual min=-0.002451 max=0.002253 Jy/beam ! Clean residual mean=0.000039 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.0983002 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 61 components and 0.0983002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125708Jy sigma=0.000746 ! Fit after self-cal, rms=0.125749Jy sigma=0.000746 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137611 Jy ! Component: 100 - total flux cleaned = 7.56994e-05 Jy ! Component: 150 - total flux cleaned = 3.6348e-05 Jy ! Component: 200 - total flux cleaned = 1.27474e-05 Jy ! Total flux subtracted in 200 components = 1.27474e-05 Jy ! Clean residual min=-0.002489 max=0.002248 Jy/beam ! Clean residual mean=0.000039 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.098313 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 67 components and 0.098313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125744Jy sigma=0.000746 ! Fit after self-cal, rms=0.125744Jy sigma=0.000746 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125744Jy sigma=0.000746 ! Fit after self-cal, rms=0.125859Jy sigma=0.000745 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.962 mas, bmaj=12.52 mas, bpa=15.57 degrees ! Estimated noise=939.097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154397 Jy ! Component: 100 - total flux cleaned = 6.00633e-05 Jy ! Component: 150 - total flux cleaned = 2.92172e-05 Jy ! Component: 200 - total flux cleaned = 1.60637e-05 Jy ! Total flux subtracted in 200 components = 1.60637e-05 Jy ! Clean residual min=-0.002401 max=0.002226 Jy/beam ! Clean residual mean=0.000038 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.0983291 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 70 components and 0.098329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125852Jy sigma=0.000745 ! Fit after self-cal, rms=0.125853Jy sigma=0.000745 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.0687e-05 Jy ! Component: 100 - total flux cleaned = 3.51437e-05 Jy ! Component: 150 - total flux cleaned = -1.59724e-05 Jy ! Component: 200 - total flux cleaned = -2.53314e-05 Jy ! Total flux subtracted in 200 components = -2.53314e-05 Jy ! Clean residual min=-0.002417 max=0.002234 Jy/beam ! Clean residual mean=0.000038 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.0983037 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 71 components and 0.0983037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125850Jy sigma=0.000745 ! Fit after self-cal, rms=0.125849Jy sigma=0.000745 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125849Jy sigma=0.000745 ! Fit after self-cal, rms=0.125735Jy sigma=0.000745 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.693 mas, bmaj=25.18 mas, bpa=4.016 degrees ! Estimated noise=1068.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.26151e-05 Jy ! Component: 100 - total flux cleaned = -5.18858e-05 Jy ! Component: 150 - total flux cleaned = -6.38255e-05 Jy ! Component: 200 - total flux cleaned = -7.53957e-05 Jy ! Total flux subtracted in 200 components = -7.53957e-05 Jy ! Clean residual min=-0.002101 max=0.002051 Jy/beam ! Clean residual mean=0.000062 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.0982283 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 82 components and 0.0982283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125731Jy sigma=0.000745 ! Fit after self-cal, rms=0.125725Jy sigma=0.000745 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.59237e-05 Jy ! Component: 100 - total flux cleaned = -3.47264e-05 Jy ! Component: 150 - total flux cleaned = -4.43295e-05 Jy ! Component: 200 - total flux cleaned = -5.35796e-05 Jy ! Total flux subtracted in 200 components = -5.35796e-05 Jy ! Clean residual min=-0.002102 max=0.002050 Jy/beam ! Clean residual mean=0.000062 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.0981747 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 85 components and 0.0981747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125722Jy sigma=0.000745 ! Fit after self-cal, rms=0.125721Jy sigma=0.000745 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.963 mas, bmaj=12.48 mas, bpa=15.57 degrees ! Estimated noise=939.805 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.963 x 12.48 at 15.57 degrees (North through East) ! Clean map min=-0.0023883 max=0.088155 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=10.07 mas, bpa=18.17 degrees ! Estimated noise=1355.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0685812 Jy ! Component: 100 - total flux cleaned = 0.0846462 Jy ! Component: 150 - total flux cleaned = 0.0909439 Jy ! Component: 200 - total flux cleaned = 0.0942664 Jy ! Total flux subtracted in 200 components = 0.0942664 Jy ! Clean residual min=-0.003285 max=0.003394 Jy/beam ! Clean residual mean=0.000013 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.0942663 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0942663 Jy ! Inverting map and beam ! Estimated beam: bmin=3.963 mas, bmaj=12.48 mas, bpa=15.57 degrees ! Estimated noise=939.805 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022963 Jy ! Component: 100 - total flux cleaned = 0.00331912 Jy ! Component: 150 - total flux cleaned = 0.00358324 Jy ! Component: 200 - total flux cleaned = 0.00362146 Jy ! Total flux subtracted in 200 components = 0.00362146 Jy ! Clean residual min=-0.002502 max=0.002293 Jy/beam ! Clean residual mean=0.000038 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0978878 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 37 components and 0.0978878 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.693 mas, bmaj=25.18 mas, bpa=4.016 degrees ! Estimated noise=1068.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179368 Jy ! Component: 100 - total flux cleaned = 0.000179174 Jy ! Component: 150 - total flux cleaned = 0.000165789 Jy ! Component: 200 - total flux cleaned = 0.000166202 Jy ! Total flux subtracted in 200 components = 0.000166202 Jy ! Clean residual min=-0.002139 max=0.002110 Jy/beam ! Clean residual mean=0.000062 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.098054 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.18364e-05 Jy ! Component: 100 - total flux cleaned = 1.19491e-05 Jy ! Component: 150 - total flux cleaned = 2.28785e-05 Jy ! Component: 200 - total flux cleaned = 2.32459e-05 Jy ! Total flux subtracted in 200 components = 2.32459e-05 Jy ! Clean residual min=-0.002134 max=0.002100 Jy/beam ! Clean residual mean=0.000062 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.0980772 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.0980772 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.963 mas, bmaj=12.48 mas, bpa=15.57 degrees ! Estimated noise=939.805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110411 Jy ! Component: 100 - total flux cleaned = 0.000109334 Jy ! Component: 150 - total flux cleaned = 9.54124e-05 Jy ! Component: 200 - total flux cleaned = 8.36217e-05 Jy ! Total flux subtracted in 200 components = 8.36217e-05 Jy ! Clean residual min=-0.002444 max=0.002289 Jy/beam ! Clean residual mean=0.000038 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.0981609 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.0981609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125724Jy sigma=0.000745 ! Fit after self-cal, rms=0.125714Jy sigma=0.000745 wmodel J1012-3740_S_2014_08_05_pus_map.mod ! Writing 52 model components to file: J1012-3740_S_2014_08_05_pus_map.mod wobs J1012-3740_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1012-3740_S_2014_08_05_pus_uvs.fits wwins J1012-3740_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J1012-3740_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.27838e-05 Jy ! Component: 100 - total flux cleaned = -0.000202256 Jy ! Component: 150 - total flux cleaned = -0.000135281 Jy ! Component: 200 - total flux cleaned = -7.03915e-05 Jy ! Component: 250 - total flux cleaned = -0.000102164 Jy ! Component: 300 - total flux cleaned = -0.000102604 Jy ! Component: 350 - total flux cleaned = -0.000192995 Jy ! Component: 400 - total flux cleaned = -0.000310157 Jy ! Component: 450 - total flux cleaned = -0.000338328 Jy ! Component: 500 - total flux cleaned = -0.000310291 Jy ! Component: 550 - total flux cleaned = -0.000337742 Jy ! Component: 600 - total flux cleaned = -0.000310392 Jy ! Component: 650 - total flux cleaned = -0.000230469 Jy ! Component: 700 - total flux cleaned = -0.000178806 Jy ! Component: 750 - total flux cleaned = -0.000178514 Jy ! Component: 800 - total flux cleaned = -0.000203124 Jy ! Component: 850 - total flux cleaned = -0.00012848 Jy ! Component: 900 - total flux cleaned = -6.21595e-06 Jy ! Component: 950 - total flux cleaned = 6.53406e-05 Jy ! Component: 1000 - total flux cleaned = 8.87736e-05 Jy ! Component: 1050 - total flux cleaned = 0.000158021 Jy ! Component: 1100 - total flux cleaned = 0.000203654 Jy ! Component: 1150 - total flux cleaned = 0.000248924 Jy ! Component: 1200 - total flux cleaned = 0.000315123 Jy ! Component: 1250 - total flux cleaned = 0.000467127 Jy ! Component: 1300 - total flux cleaned = 0.000423901 Jy ! Component: 1350 - total flux cleaned = 0.000551 Jy ! Component: 1400 - total flux cleaned = 0.0006343 Jy ! Component: 1450 - total flux cleaned = 0.000716583 Jy ! Component: 1500 - total flux cleaned = 0.000777441 Jy ! Component: 1550 - total flux cleaned = 0.000898225 Jy ! Component: 1600 - total flux cleaned = 0.000977282 Jy ! Component: 1650 - total flux cleaned = 0.00103597 Jy ! Component: 1700 - total flux cleaned = 0.00115203 Jy ! Component: 1750 - total flux cleaned = 0.0011521 Jy ! Component: 1800 - total flux cleaned = 0.00124676 Jy ! Component: 1850 - total flux cleaned = 0.00132141 Jy ! Component: 1900 - total flux cleaned = 0.0013765 Jy ! Component: 1950 - total flux cleaned = 0.00139501 Jy ! Component: 2000 - total flux cleaned = 0.00152093 Jy ! Component: 2050 - total flux cleaned = 0.00159211 Jy ! Component: 2100 - total flux cleaned = 0.00169765 Jy ! Component: 2150 - total flux cleaned = 0.00176728 Jy ! Component: 2200 - total flux cleaned = 0.00190502 Jy ! Component: 2250 - total flux cleaned = 0.00202414 Jy ! Component: 2300 - total flux cleaned = 0.00212502 Jy ! Component: 2350 - total flux cleaned = 0.00222504 Jy ! Component: 2400 - total flux cleaned = 0.00235691 Jy ! Component: 2450 - total flux cleaned = 0.00242192 Jy ! Component: 2500 - total flux cleaned = 0.00251877 Jy ! Component: 2550 - total flux cleaned = 0.00261459 Jy ! Component: 2600 - total flux cleaned = 0.00269394 Jy ! Component: 2650 - total flux cleaned = 0.00275678 Jy ! Component: 2700 - total flux cleaned = 0.00281874 Jy ! Component: 2750 - total flux cleaned = 0.00289576 Jy ! Component: 2800 - total flux cleaned = 0.00298702 Jy ! Component: 2850 - total flux cleaned = 0.00303229 Jy ! Component: 2900 - total flux cleaned = 0.00303212 Jy ! Component: 2950 - total flux cleaned = 0.00310638 Jy ! Component: 3000 - total flux cleaned = 0.0031651 Jy ! Component: 3050 - total flux cleaned = 0.00317981 Jy ! Component: 3100 - total flux cleaned = 0.00323773 Jy ! Component: 3150 - total flux cleaned = 0.00325207 Jy ! Component: 3200 - total flux cleaned = 0.00329491 Jy ! Component: 3250 - total flux cleaned = 0.00330901 Jy ! Component: 3300 - total flux cleaned = 0.00330927 Jy ! Component: 3350 - total flux cleaned = 0.00332326 Jy ! Component: 3400 - total flux cleaned = 0.00336462 Jy ! Component: 3450 - total flux cleaned = 0.00336476 Jy ! Component: 3500 - total flux cleaned = 0.00339189 Jy ! Component: 3550 - total flux cleaned = 0.00340511 Jy ! Component: 3600 - total flux cleaned = 0.00343169 Jy ! Component: 3650 - total flux cleaned = 0.00336536 Jy ! Component: 3700 - total flux cleaned = 0.00339181 Jy ! Component: 3750 - total flux cleaned = 0.003418 Jy ! Component: 3800 - total flux cleaned = 0.00339229 Jy ! Component: 3850 - total flux cleaned = 0.0034438 Jy ! Component: 3900 - total flux cleaned = 0.00345653 Jy ! Component: 3950 - total flux cleaned = 0.00349449 Jy ! Component: 4000 - total flux cleaned = 0.0034945 Jy ! Component: 4050 - total flux cleaned = 0.00348203 Jy ! Total flux subtracted in 4096 components = 0.00351938 Jy ! Clean residual min=-0.000820 max=0.000795 Jy/beam ! Clean residual mean=0.000006 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.10168 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 339 components and 0.10168 Jy ![Exited script file: muppet] wmap "J1012-3740_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.963 x 12.48 at 15.57 degrees (North through East) ! Clean map min=-0.0018328 max=0.088568 Jy/beam ! Writing clean map to FITS file: J1012-3740_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0885682 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000233438 device "J1012-3740_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1012-3740_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.790707 0.790707 1.58141 3.16283 6.32565 12.6513 25.3026 50.6052 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.088 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.963 x 12.48 at 15.57 degrees (North through East) ! Clean map min=-0.0018328 max=0.088568 Jy/beam quit ! Quitting program ! Log file J1012-3740_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:23:57 2016