! Started logfile: J0958-3612_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:23:25 2016
obs J0958-3612_S_2014_08_05_pus_uva.fits
! Reading UV FITS file: J0958-3612_S_2014_08_05_pus_uva.fits
! AN table 1: 114 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.527485 visibilities/baseline/integration-bin.
! Found source: J0958-3612
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 360 lines of history.
! 
! Reading 10824 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0958-3612_S_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 308 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 308 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 308 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 308 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.941162Jy  sigma=0.006869
! Fit after  self-cal, rms=0.882352Jy  sigma=0.006447
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.032 mas, bmaj=11.74 mas, bpa=20.61 degrees
! Estimated noise=1452.91 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0920672 Jy
! Component: 100  -  total flux cleaned = 0.119692 Jy
! Total flux subtracted in 100 components = 0.119692 Jy
! Clean residual min=-0.010860 max=0.020177 Jy/beam
! Clean residual mean=-0.000123 rms=0.003587 Jy/beam
! Combined flux in latest and established models = 0.119692 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.119692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124737Jy  sigma=0.000862
! Fit after  self-cal, rms=0.124668Jy  sigma=0.000862
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.051 mas, bmaj=14.82 mas, bpa=20.3 degrees
! Estimated noise=940.172 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9, 3.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0324205 Jy
! Component: 100  -  total flux cleaned = 0.0519604 Jy
! Component: 150  -  total flux cleaned = 0.0645828 Jy
! Component: 200  -  total flux cleaned = 0.0736418 Jy
! Total flux subtracted in 200 components = 0.0736418 Jy
! Clean residual min=-0.006596 max=0.010137 Jy/beam
! Clean residual mean=-0.000151 rms=0.002132 Jy/beam
! Combined flux in latest and established models = 0.193333 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 68 components and 0.193333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115530Jy  sigma=0.000785
! Fit after  self-cal, rms=0.114680Jy  sigma=0.000780
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.86     HN        1.00*    KP        1.05     
!   LA        1.04     MK        1.00*    NL        1.15     OV        0.98     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        1.00*    KP        0.99     
!   LA        0.99     MK        1.00*    NL        1.22     OV        1.00     
!   PT        0.93     SC        1.03     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.24     HN        1.00*    KP        0.87     
!   LA        0.79     MK        1.00*    NL        1.20     OV        0.92     
!   PT        0.93     SC        1.10     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.00*    KP        0.86     
!   LA        0.77     MK        1.00*    NL        1.26     OV        0.98     
!   PT        0.97     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.114680Jy  sigma=0.000780
! Fit after  self-cal, rms=0.114453Jy  sigma=0.000765
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.094 mas, bmaj=15.27 mas, bpa=20.45 degrees
! Estimated noise=918.396 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00674923 Jy
! Component: 100  -  total flux cleaned = 0.00935158 Jy
! Component: 150  -  total flux cleaned = 0.00944364 Jy
! Component: 200  -  total flux cleaned = 0.00943951 Jy
! Total flux subtracted in 200 components = 0.00943951 Jy
! Clean residual min=-0.004348 max=0.004648 Jy/beam
! Clean residual mean=-0.000023 rms=0.001131 Jy/beam
! Combined flux in latest and established models = 0.202773 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 97 components and 0.202773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.114009Jy  sigma=0.000761
! Fit after  self-cal, rms=0.113993Jy  sigma=0.000760
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113993Jy  sigma=0.000760
! Fit after  self-cal, rms=0.114401Jy  sigma=0.000759
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.098 mas, bmaj=15.17 mas, bpa=20.3 degrees
! Estimated noise=914.928 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247377 Jy
! Component: 100  -  total flux cleaned = 0.00248043 Jy
! Component: 150  -  total flux cleaned = 0.00248009 Jy
! Component: 200  -  total flux cleaned = 0.00261607 Jy
! Total flux subtracted in 200 components = 0.00261607 Jy
! Clean residual min=-0.003989 max=0.004612 Jy/beam
! Clean residual mean=-0.000016 rms=0.001025 Jy/beam
! Combined flux in latest and established models = 0.205389 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 119 components and 0.205389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.114228Jy  sigma=0.000758
! Fit after  self-cal, rms=0.114189Jy  sigma=0.000758
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-25, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00435298 Jy
! Component: 100  -  total flux cleaned = 0.00542576 Jy
! Component: 150  -  total flux cleaned = 0.00571023 Jy
! Component: 200  -  total flux cleaned = 0.00583319 Jy
! Total flux subtracted in 200 components = 0.00583319 Jy
! Clean residual min=-0.003755 max=0.003197 Jy/beam
! Clean residual mean=0.000008 rms=0.000880 Jy/beam
! Combined flux in latest and established models = 0.211222 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 141 components and 0.211222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113990Jy  sigma=0.000756
! Fit after  self-cal, rms=0.113955Jy  sigma=0.000756
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113955Jy  sigma=0.000756
! Fit after  self-cal, rms=0.113255Jy  sigma=0.000756
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.097 mas, bmaj=15.13 mas, bpa=20.27 degrees
! Estimated noise=910.708 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203714 Jy
! Component: 100  -  total flux cleaned = 0.00250132 Jy
! Component: 150  -  total flux cleaned = 0.00277526 Jy
! Component: 200  -  total flux cleaned = 0.00292353 Jy
! Total flux subtracted in 200 components = 0.00292353 Jy
! Clean residual min=-0.003737 max=0.003263 Jy/beam
! Clean residual mean=0.000004 rms=0.000813 Jy/beam
! Combined flux in latest and established models = 0.214146 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 165 components and 0.214146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113173Jy  sigma=0.000755
! Fit after  self-cal, rms=0.113147Jy  sigma=0.000755
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000669039 Jy
! Component: 100  -  total flux cleaned = 0.000915201 Jy
! Component: 150  -  total flux cleaned = 0.00100057 Jy
! Component: 200  -  total flux cleaned = 0.00103967 Jy
! Total flux subtracted in 200 components = 0.00103967 Jy
! Clean residual min=-0.003673 max=0.003221 Jy/beam
! Clean residual mean=0.000008 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.215185 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 184 components and 0.215185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113102Jy  sigma=0.000755
! Fit after  self-cal, rms=0.113090Jy  sigma=0.000755
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113090Jy  sigma=0.000755
! Fit after  self-cal, rms=0.112877Jy  sigma=0.000755
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.471 mas, bmaj=28.15 mas, bpa=7.929 degrees
! Estimated noise=1006.32 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000739413 Jy
! Component: 100  -  total flux cleaned = 0.00107426 Jy
! Component: 150  -  total flux cleaned = 0.00125028 Jy
! Component: 200  -  total flux cleaned = 0.00132236 Jy
! Total flux subtracted in 200 components = 0.00132236 Jy
! Clean residual min=-0.003650 max=0.003965 Jy/beam
! Clean residual mean=0.000006 rms=0.000947 Jy/beam
! Combined flux in latest and established models = 0.216508 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 198 components and 0.216508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112854Jy  sigma=0.000755
! Fit after  self-cal, rms=0.112843Jy  sigma=0.000755
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000214277 Jy
! Component: 100  -  total flux cleaned = 0.000429752 Jy
! Component: 150  -  total flux cleaned = 0.000474018 Jy
! Component: 200  -  total flux cleaned = 0.000534867 Jy
! Total flux subtracted in 200 components = 0.000534867 Jy
! Clean residual min=-0.003590 max=0.003932 Jy/beam
! Clean residual mean=0.000010 rms=0.000941 Jy/beam
! Combined flux in latest and established models = 0.217043 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 206 components and 0.217043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112828Jy  sigma=0.000755
! Fit after  self-cal, rms=0.112820Jy  sigma=0.000755
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.106 mas, bmaj=15.14 mas, bpa=20.23 degrees
! Estimated noise=909.54 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.106 x 15.14 at 20.23 degrees (North through East)
! Clean map  min=-0.0035584  max=0.10493 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.04 mas, bmaj=11.89 mas, bpa=20.47 degrees
! Estimated noise=1419.86 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0888794 Jy
! Component: 100  -  total flux cleaned = 0.119956 Jy
! Component: 150  -  total flux cleaned = 0.140222 Jy
! Component: 200  -  total flux cleaned = 0.154543 Jy
! Total flux subtracted in 200 components = 0.154543 Jy
! Clean residual min=-0.006451 max=0.008183 Jy/beam
! Clean residual mean=-0.000070 rms=0.002090 Jy/beam
! Combined flux in latest and established models = 0.154543 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 41 model components to the UV plane model.
! The established model now contains 41 components and 0.154543 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.106 mas, bmaj=15.14 mas, bpa=20.23 degrees
! Estimated noise=909.54 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0163219 Jy
! Component: 100  -  total flux cleaned = 0.0270963 Jy
! Component: 150  -  total flux cleaned = 0.0350883 Jy
! Component: 200  -  total flux cleaned = 0.0411326 Jy
! Total flux subtracted in 200 components = 0.0411326 Jy
! Clean residual min=-0.004643 max=0.004652 Jy/beam
! Clean residual mean=-0.000059 rms=0.001236 Jy/beam
! Combined flux in latest and established models = 0.195676 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 103 components and 0.195676 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.471 mas, bmaj=28.15 mas, bpa=7.929 degrees
! Estimated noise=1006.32 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00617229 Jy
! Component: 100  -  total flux cleaned = 0.0103423 Jy
! Component: 150  -  total flux cleaned = 0.0133495 Jy
! Component: 200  -  total flux cleaned = 0.0155885 Jy
! Total flux subtracted in 200 components = 0.0155885 Jy
! Clean residual min=-0.003612 max=0.003404 Jy/beam
! Clean residual mean=-0.000022 rms=0.001037 Jy/beam
! Combined flux in latest and established models = 0.211264 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00172838 Jy
! Component: 100  -  total flux cleaned = 0.00308213 Jy
! Component: 150  -  total flux cleaned = 0.00414298 Jy
! Component: 200  -  total flux cleaned = 0.00453188 Jy
! Total flux subtracted in 200 components = 0.00453188 Jy
! Clean residual min=-0.003359 max=0.003547 Jy/beam
! Clean residual mean=0.000000 rms=0.000960 Jy/beam
! Combined flux in latest and established models = 0.215796 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 155 components and 0.215796 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.106 mas, bmaj=15.14 mas, bpa=20.23 degrees
! Estimated noise=909.54 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000359523 Jy
! Component: 100  -  total flux cleaned = -0.000285519 Jy
! Component: 150  -  total flux cleaned = -3.15882e-05 Jy
! Component: 200  -  total flux cleaned = 0.000189385 Jy
! Total flux subtracted in 200 components = 0.000189385 Jy
! Clean residual min=-0.003506 max=0.003224 Jy/beam
! Clean residual mean=-0.000000 rms=0.000793 Jy/beam
! Combined flux in latest and established models = 0.215985 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 177 components and 0.215985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112870Jy  sigma=0.000755
! Fit after  self-cal, rms=0.112839Jy  sigma=0.000755
wmodel J0958-3612_S_2014_08_05_pus_map.mod
! Writing 177 model components to file: J0958-3612_S_2014_08_05_pus_map.mod
wobs J0958-3612_S_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J0958-3612_S_2014_08_05_pus_uvs.fits
wwins J0958-3612_S_2014_08_05_pus_map.win
! wwins: Wrote 3 windows to J0958-3612_S_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000464802 Jy
! Component: 100  -  total flux cleaned = -0.000265551 Jy
! Component: 150  -  total flux cleaned = 0.00013886 Jy
! Component: 200  -  total flux cleaned = 0.000381571 Jy
! Component: 250  -  total flux cleaned = 0.000347136 Jy
! Component: 300  -  total flux cleaned = 0.000206637 Jy
! Component: 350  -  total flux cleaned = 0.00020545 Jy
! Component: 400  -  total flux cleaned = 4.2855e-05 Jy
! Component: 450  -  total flux cleaned = 1.1264e-05 Jy
! Component: 500  -  total flux cleaned = -1.87848e-05 Jy
! Component: 550  -  total flux cleaned = -1.86303e-05 Jy
! Component: 600  -  total flux cleaned = 3.89431e-05 Jy
! Component: 650  -  total flux cleaned = 9.53807e-05 Jy
! Component: 700  -  total flux cleaned = 9.59969e-05 Jy
! Component: 750  -  total flux cleaned = 9.63436e-05 Jy
! Component: 800  -  total flux cleaned = 7.0394e-05 Jy
! Component: 850  -  total flux cleaned = 0.000146481 Jy
! Component: 900  -  total flux cleaned = 9.65655e-05 Jy
! Component: 950  -  total flux cleaned = 0.00012081 Jy
! Component: 1000  -  total flux cleaned = 9.70521e-05 Jy
! Component: 1050  -  total flux cleaned = 5.00145e-05 Jy
! Component: 1100  -  total flux cleaned = 4.10112e-06 Jy
! Component: 1150  -  total flux cleaned = 4.00766e-06 Jy
! Component: 1200  -  total flux cleaned = 4.30732e-06 Jy
! Component: 1250  -  total flux cleaned = 4.20968e-06 Jy
! Component: 1300  -  total flux cleaned = 4.75613e-05 Jy
! Component: 1350  -  total flux cleaned = 8.94454e-05 Jy
! Component: 1400  -  total flux cleaned = 6.86214e-05 Jy
! Component: 1450  -  total flux cleaned = 0.000109114 Jy
! Component: 1500  -  total flux cleaned = 6.81697e-05 Jy
! Component: 1550  -  total flux cleaned = 6.81348e-05 Jy
! Component: 1600  -  total flux cleaned = 8.71847e-05 Jy
! Component: 1650  -  total flux cleaned = 0.000106208 Jy
! Component: 1700  -  total flux cleaned = 0.000124983 Jy
! Component: 1750  -  total flux cleaned = 0.000143387 Jy
! Component: 1800  -  total flux cleaned = 7.10259e-05 Jy
! Component: 1850  -  total flux cleaned = 8.93263e-05 Jy
! Component: 1900  -  total flux cleaned = 8.93933e-05 Jy
! Component: 1950  -  total flux cleaned = 3.71077e-05 Jy
! Component: 2000  -  total flux cleaned = -4.88751e-05 Jy
! Component: 2050  -  total flux cleaned = -1.46974e-05 Jy
! Component: 2100  -  total flux cleaned = -8.15325e-05 Jy
! Component: 2150  -  total flux cleaned = -8.144e-05 Jy
! Component: 2200  -  total flux cleaned = -0.000114211 Jy
! Component: 2250  -  total flux cleaned = -9.82849e-05 Jy
! Component: 2300  -  total flux cleaned = -0.000146088 Jy
! Component: 2350  -  total flux cleaned = -0.000145868 Jy
! Component: 2400  -  total flux cleaned = -0.000145745 Jy
! Component: 2450  -  total flux cleaned = -0.000130641 Jy
! Component: 2500  -  total flux cleaned = -0.000115465 Jy
! Component: 2550  -  total flux cleaned = -0.000190849 Jy
! Component: 2600  -  total flux cleaned = -0.000160963 Jy
! Component: 2650  -  total flux cleaned = -0.000101787 Jy
! Component: 2700  -  total flux cleaned = -0.000160262 Jy
! Component: 2750  -  total flux cleaned = -0.000174592 Jy
! Component: 2800  -  total flux cleaned = -0.000131889 Jy
! Component: 2850  -  total flux cleaned = -0.000160446 Jy
! Component: 2900  -  total flux cleaned = -0.000202336 Jy
! Component: 2950  -  total flux cleaned = -0.000188368 Jy
! Component: 3000  -  total flux cleaned = -0.000160567 Jy
! Component: 3050  -  total flux cleaned = -0.000187642 Jy
! Component: 3100  -  total flux cleaned = -0.000120316 Jy
! Component: 3150  -  total flux cleaned = -0.000147074 Jy
! Component: 3200  -  total flux cleaned = -0.000133702 Jy
! Component: 3250  -  total flux cleaned = -9.42926e-05 Jy
! Component: 3300  -  total flux cleaned = -2.9365e-05 Jy
! Component: 3350  -  total flux cleaned = 9.26427e-06 Jy
! Component: 3400  -  total flux cleaned = 4.76457e-05 Jy
! Component: 3450  -  total flux cleaned = 9.84526e-05 Jy
! Component: 3500  -  total flux cleaned = 0.000148773 Jy
! Component: 3550  -  total flux cleaned = 0.000186335 Jy
! Component: 3600  -  total flux cleaned = 0.000235998 Jy
! Component: 3650  -  total flux cleaned = 0.000285355 Jy
! Component: 3700  -  total flux cleaned = 0.000322097 Jy
! Component: 3750  -  total flux cleaned = 0.000395186 Jy
! Component: 3800  -  total flux cleaned = 0.00044341 Jy
! Component: 3850  -  total flux cleaned = 0.000455378 Jy
! Component: 3900  -  total flux cleaned = 0.000526967 Jy
! Component: 3950  -  total flux cleaned = 0.000574409 Jy
! Component: 4000  -  total flux cleaned = 0.000645092 Jy
! Component: 4050  -  total flux cleaned = 0.000703746 Jy
! Total flux subtracted in 4096 components = 0.000750366 Jy
! Clean residual min=-0.000689 max=0.000699 Jy/beam
! Clean residual mean=-0.000003 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.216736 Jy
keep
! Adding 276 model components to the UV plane model.
! The established model now contains 453 components and 0.216736 Jy
![Exited script file: muppet]
wmap "J0958-3612_S_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.106 x 15.14 at 20.23 degrees (North through East)
! Clean map  min=-0.0016754  max=0.10553 Jy/beam
! Writing clean map to FITS file: J0958-3612_S_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.105534 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000224591 
device "J0958-3612_S_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J0958-3612_S_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.638441 0.638441 1.27688 2.55376 5.10753 10.2151 20.4301 40.8602 81.7205
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.105 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.106 x 15.14 at 20.23 degrees (North through East)
! Clean map  min=-0.0016754  max=0.10553 Jy/beam
quit
! Quitting program
! Log file J0958-3612_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:23:30 2016