! Started logfile: J0924+4511_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:22:48 2016 obs J0924+4511_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0924+4511_S_2014_08_05_pus_uva.fits ! AN table 1: 102 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.78671 visibilities/baseline/integration-bin. ! Found source: J0924+4511 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 14444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0924+4511_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.890632Jy sigma=0.009999 ! Fit after self-cal, rms=0.821109Jy sigma=0.009242 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=6.384 mas, bpa=35.22 degrees ! Estimated noise=883.245 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137899 Jy ! Component: 100 - total flux cleaned = 0.168171 Jy ! Total flux subtracted in 100 components = 0.168171 Jy ! Clean residual min=-0.006332 max=0.009751 Jy/beam ! Clean residual mean=-0.000002 rms=0.001722 Jy/beam ! Combined flux in latest and established models = 0.168171 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.168171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083310Jy sigma=0.000844 ! Fit after self-cal, rms=0.083304Jy sigma=0.000844 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.882 mas, bmaj=7.238 mas, bpa=34.24 degrees ! Estimated noise=532.531 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156584 Jy ! Component: 100 - total flux cleaned = 0.0238845 Jy ! Component: 150 - total flux cleaned = 0.0285655 Jy ! Component: 200 - total flux cleaned = 0.0312984 Jy ! Total flux subtracted in 200 components = 0.0312984 Jy ! Clean residual min=-0.003857 max=0.004361 Jy/beam ! Clean residual mean=0.000025 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 0.199469 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 32 components and 0.199469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080198Jy sigma=0.000811 ! Fit after self-cal, rms=0.080180Jy sigma=0.000811 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.86 HN 0.95 KP 1.05 ! LA 1.09 MK 1.00* NL 0.96 OV 0.97 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.00 KP 1.00 ! LA 1.06 MK 1.00* NL 1.00 OV 1.01 ! PT 1.02 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.15 HN 1.01 KP 0.89 ! LA 0.85 MK 1.00* NL 0.98 OV 0.95 ! PT 0.99 SC 1.10 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.99 KP 0.86 ! LA 0.80 MK 1.00* NL 1.07 OV 1.02 ! PT 1.05 SC 1.08 ! ! ! Fit before self-cal, rms=0.080180Jy sigma=0.000811 ! Fit after self-cal, rms=0.076433Jy sigma=0.000782 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.972 mas, bmaj=7.251 mas, bpa=33.93 degrees ! Estimated noise=528.085 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00222262 Jy ! Component: 100 - total flux cleaned = -0.00233176 Jy ! Component: 150 - total flux cleaned = -0.00228796 Jy ! Component: 200 - total flux cleaned = -0.00232696 Jy ! Total flux subtracted in 200 components = -0.00232696 Jy ! Clean residual min=-0.002528 max=0.002584 Jy/beam ! Clean residual mean=-0.000006 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.197142 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.197142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076307Jy sigma=0.000782 ! Fit after self-cal, rms=0.076313Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076313Jy sigma=0.000782 ! Fit after self-cal, rms=0.078946Jy sigma=0.000778 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.908 mas, bmaj=7.315 mas, bpa=34.3 degrees ! Estimated noise=526.886 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00142589 Jy ! Component: 100 - total flux cleaned = -0.00134347 Jy ! Component: 150 - total flux cleaned = -0.00130917 Jy ! Component: 200 - total flux cleaned = -0.00127996 Jy ! Total flux subtracted in 200 components = -0.00127996 Jy ! Clean residual min=-0.001719 max=0.001500 Jy/beam ! Clean residual mean=0.000003 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.195862 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.195862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078888Jy sigma=0.000777 ! Fit after self-cal, rms=0.078923Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.79288e-05 Jy ! Component: 100 - total flux cleaned = -6.1965e-06 Jy ! Component: 150 - total flux cleaned = 2.60074e-05 Jy ! Component: 200 - total flux cleaned = 5.27896e-05 Jy ! Total flux subtracted in 200 components = 5.27896e-05 Jy ! Clean residual min=-0.001667 max=0.001500 Jy/beam ! Clean residual mean=0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.195915 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 61 components and 0.195915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078913Jy sigma=0.000777 ! Fit after self-cal, rms=0.078911Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078911Jy sigma=0.000777 ! Fit after self-cal, rms=0.079362Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.899 mas, bmaj=7.335 mas, bpa=34.31 degrees ! Estimated noise=526.509 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000717266 Jy ! Component: 100 - total flux cleaned = -0.000684014 Jy ! Component: 150 - total flux cleaned = -0.000656538 Jy ! Component: 200 - total flux cleaned = -0.000620969 Jy ! Total flux subtracted in 200 components = -0.000620969 Jy ! Clean residual min=-0.001545 max=0.001457 Jy/beam ! Clean residual mean=0.000003 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.195294 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 68 components and 0.195294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079350Jy sigma=0.000777 ! Fit after self-cal, rms=0.079356Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.775e-05 Jy ! Component: 100 - total flux cleaned = -1.88176e-05 Jy ! Component: 150 - total flux cleaned = 1.33642e-05 Jy ! Component: 200 - total flux cleaned = 2.78437e-05 Jy ! Total flux subtracted in 200 components = 2.78437e-05 Jy ! Clean residual min=-0.001533 max=0.001458 Jy/beam ! Clean residual mean=0.000003 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.195322 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 72 components and 0.195322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079353Jy sigma=0.000777 ! Fit after self-cal, rms=0.079353Jy sigma=0.000777 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079353Jy sigma=0.000777 ! Fit after self-cal, rms=0.079552Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.82 mas, bmaj=9.354 mas, bpa=72.13 degrees ! Estimated noise=592.469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000266677 Jy ! Component: 100 - total flux cleaned = -0.000256403 Jy ! Component: 150 - total flux cleaned = -0.000247208 Jy ! Component: 200 - total flux cleaned = -0.000246953 Jy ! Total flux subtracted in 200 components = -0.000246953 Jy ! Clean residual min=-0.001338 max=0.001474 Jy/beam ! Clean residual mean=0.000006 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.195075 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 79 components and 0.195075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079549Jy sigma=0.000777 ! Fit after self-cal, rms=0.079551Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.58556e-06 Jy ! Component: 100 - total flux cleaned = -1.55586e-06 Jy ! Component: 150 - total flux cleaned = -1.00923e-06 Jy ! Component: 200 - total flux cleaned = 6.3011e-06 Jy ! Total flux subtracted in 200 components = 6.3011e-06 Jy ! Clean residual min=-0.001341 max=0.001483 Jy/beam ! Clean residual mean=0.000006 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.195081 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 83 components and 0.195081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079551Jy sigma=0.000777 ! Fit after self-cal, rms=0.079551Jy sigma=0.000777 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.893 mas, bmaj=7.345 mas, bpa=34.31 degrees ! Estimated noise=526.345 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.893 x 7.345 at 34.31 degrees (North through East) ! Clean map min=-0.0013966 max=0.1794 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.893 mas, bmaj=6.458 mas, bpa=35.21 degrees ! Estimated noise=884.055 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137955 Jy ! Component: 100 - total flux cleaned = 0.168195 Jy ! Component: 150 - total flux cleaned = 0.178055 Jy ! Component: 200 - total flux cleaned = 0.183587 Jy ! Total flux subtracted in 200 components = 0.183587 Jy ! Clean residual min=-0.002911 max=0.003318 Jy/beam ! Clean residual mean=-0.000005 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.183587 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.183587 Jy ! Inverting map and beam ! Estimated beam: bmin=4.893 mas, bmaj=7.345 mas, bpa=34.31 degrees ! Estimated noise=526.345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00495568 Jy ! Component: 100 - total flux cleaned = 0.0076083 Jy ! Component: 150 - total flux cleaned = 0.00910749 Jy ! Component: 200 - total flux cleaned = 0.0099999 Jy ! Total flux subtracted in 200 components = 0.0099999 Jy ! Clean residual min=-0.001443 max=0.001616 Jy/beam ! Clean residual mean=0.000002 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.193587 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 50 components and 0.193587 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.82 mas, bmaj=9.354 mas, bpa=72.13 degrees ! Estimated noise=592.469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000864608 Jy ! Component: 100 - total flux cleaned = 0.00103866 Jy ! Component: 150 - total flux cleaned = 0.00115188 Jy ! Component: 200 - total flux cleaned = 0.00124217 Jy ! Total flux subtracted in 200 components = 0.00124217 Jy ! Clean residual min=-0.001430 max=0.001601 Jy/beam ! Clean residual mean=0.000006 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.194829 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.17403e-05 Jy ! Component: 100 - total flux cleaned = 8.39621e-05 Jy ! Component: 150 - total flux cleaned = 0.000104134 Jy ! Component: 200 - total flux cleaned = 0.000123139 Jy ! Total flux subtracted in 200 components = 0.000123139 Jy ! Clean residual min=-0.001419 max=0.001564 Jy/beam ! Clean residual mean=0.000006 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.194952 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 0.194952 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.893 mas, bmaj=7.345 mas, bpa=34.31 degrees ! Estimated noise=526.345 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.85839e-05 Jy ! Component: 100 - total flux cleaned = -0.000120411 Jy ! Component: 150 - total flux cleaned = -0.000120348 Jy ! Component: 200 - total flux cleaned = -0.00012062 Jy ! Total flux subtracted in 200 components = -0.00012062 Jy ! Clean residual min=-0.001382 max=0.001473 Jy/beam ! Clean residual mean=0.000003 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.194831 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 74 components and 0.194831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079553Jy sigma=0.000777 ! Fit after self-cal, rms=0.079555Jy sigma=0.000777 wmodel J0924+4511_S_2014_08_05_pus_map.mod ! Writing 74 model components to file: J0924+4511_S_2014_08_05_pus_map.mod wobs J0924+4511_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0924+4511_S_2014_08_05_pus_uvs.fits wwins J0924+4511_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J0924+4511_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00035374 Jy ! Component: 100 - total flux cleaned = 0.000451274 Jy ! Component: 150 - total flux cleaned = 0.000428278 Jy ! Component: 200 - total flux cleaned = 0.000429571 Jy ! Component: 250 - total flux cleaned = 0.000407993 Jy ! Component: 300 - total flux cleaned = 0.000386708 Jy ! Component: 350 - total flux cleaned = 0.000386489 Jy ! Component: 400 - total flux cleaned = 0.000406174 Jy ! Component: 450 - total flux cleaned = 0.000405985 Jy ! Component: 500 - total flux cleaned = 0.000463505 Jy ! Component: 550 - total flux cleaned = 0.000500672 Jy ! Component: 600 - total flux cleaned = 0.000500604 Jy ! Component: 650 - total flux cleaned = 0.000464252 Jy ! Component: 700 - total flux cleaned = 0.000411588 Jy ! Component: 750 - total flux cleaned = 0.000325885 Jy ! Component: 800 - total flux cleaned = 0.000292577 Jy ! Component: 850 - total flux cleaned = 0.000210007 Jy ! Component: 900 - total flux cleaned = 0.000226571 Jy ! Component: 950 - total flux cleaned = 0.000178295 Jy ! Component: 1000 - total flux cleaned = 0.000178116 Jy ! Component: 1050 - total flux cleaned = 0.000193762 Jy ! Component: 1100 - total flux cleaned = 0.000209218 Jy ! Component: 1150 - total flux cleaned = 0.000209037 Jy ! Component: 1200 - total flux cleaned = 0.000238689 Jy ! Component: 1250 - total flux cleaned = 0.000267597 Jy ! Component: 1300 - total flux cleaned = 0.00026768 Jy ! Component: 1350 - total flux cleaned = 0.000267671 Jy ! Component: 1400 - total flux cleaned = 0.0002679 Jy ! Component: 1450 - total flux cleaned = 0.000295715 Jy ! Component: 1500 - total flux cleaned = 0.000323058 Jy ! Component: 1550 - total flux cleaned = 0.00040332 Jy ! Component: 1600 - total flux cleaned = 0.000350151 Jy ! Component: 1650 - total flux cleaned = 0.000389594 Jy ! Component: 1700 - total flux cleaned = 0.000402734 Jy ! Component: 1750 - total flux cleaned = 0.000453748 Jy ! Component: 1800 - total flux cleaned = 0.000453803 Jy ! Component: 1850 - total flux cleaned = 0.000503667 Jy ! Component: 1900 - total flux cleaned = 0.000540561 Jy ! Component: 1950 - total flux cleaned = 0.00051634 Jy ! Component: 2000 - total flux cleaned = 0.000552525 Jy ! Component: 2050 - total flux cleaned = 0.000599884 Jy ! Component: 2100 - total flux cleaned = 0.000576405 Jy ! Component: 2150 - total flux cleaned = 0.000553242 Jy ! Component: 2200 - total flux cleaned = 0.000633849 Jy ! Component: 2250 - total flux cleaned = 0.000656327 Jy ! Component: 2300 - total flux cleaned = 0.000667565 Jy ! Component: 2350 - total flux cleaned = 0.000678604 Jy ! Component: 2400 - total flux cleaned = 0.000744786 Jy ! Component: 2450 - total flux cleaned = 0.000755687 Jy ! Component: 2500 - total flux cleaned = 0.000755739 Jy ! Component: 2550 - total flux cleaned = 0.000819957 Jy ! Component: 2600 - total flux cleaned = 0.000777465 Jy ! Component: 2650 - total flux cleaned = 0.000798374 Jy ! Component: 2700 - total flux cleaned = 0.000839927 Jy ! Component: 2750 - total flux cleaned = 0.000788219 Jy ! Component: 2800 - total flux cleaned = 0.000777974 Jy ! Component: 2850 - total flux cleaned = 0.000818817 Jy ! Component: 2900 - total flux cleaned = 0.00084906 Jy ! Component: 2950 - total flux cleaned = 0.000888918 Jy ! Component: 3000 - total flux cleaned = 0.000839378 Jy ! Component: 3050 - total flux cleaned = 0.000809884 Jy ! Component: 3100 - total flux cleaned = 0.000819718 Jy ! Component: 3150 - total flux cleaned = 0.000868139 Jy ! Component: 3200 - total flux cleaned = 0.000829677 Jy ! Component: 3250 - total flux cleaned = 0.000848792 Jy ! Component: 3300 - total flux cleaned = 0.000877219 Jy ! Component: 3350 - total flux cleaned = 0.000858389 Jy ! Component: 3400 - total flux cleaned = 0.000877007 Jy ! Component: 3450 - total flux cleaned = 0.000867812 Jy ! Component: 3500 - total flux cleaned = 0.00087702 Jy ! Component: 3550 - total flux cleaned = 0.00084031 Jy ! Component: 3600 - total flux cleaned = 0.000858352 Jy ! Component: 3650 - total flux cleaned = 0.0008493 Jy ! Component: 3700 - total flux cleaned = 0.000813358 Jy ! Component: 3750 - total flux cleaned = 0.000831115 Jy ! Component: 3800 - total flux cleaned = 0.000804441 Jy ! Component: 3850 - total flux cleaned = 0.00076034 Jy ! Component: 3900 - total flux cleaned = 0.000760351 Jy ! Component: 3950 - total flux cleaned = 0.000769076 Jy ! Component: 4000 - total flux cleaned = 0.000734386 Jy ! Component: 4050 - total flux cleaned = 0.000743104 Jy ! Total flux subtracted in 4096 components = 0.00074317 Jy ! Clean residual min=-0.000526 max=0.000427 Jy/beam ! Clean residual mean=0.000002 rms=0.000162 Jy/beam ! Combined flux in latest and established models = 0.195574 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 370 components and 0.195575 Jy ![Exited script file: muppet] wmap "J0924+4511_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.893 x 7.345 at 34.31 degrees (North through East) ! Clean map min=-0.0011999 max=0.1795 Jy/beam ! Writing clean map to FITS file: J0924+4511_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.179503 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000160681 device "J0924+4511_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0924+4511_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.268544 0.268544 0.537088 1.07418 2.14835 4.29671 8.59341 17.1868 34.3736 68.7473 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.179 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.893 x 7.345 at 34.31 degrees (North through East) ! Clean map min=-0.0011999 max=0.1795 Jy/beam quit ! Quitting program ! Log file J0924+4511_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:22:53 2016