! Started logfile: J0909+0835_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:22:31 2016 obs J0909+0835_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0909+0835_S_2014_08_05_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.67381 visibilities/baseline/integration-bin. ! Found source: J0909+0835 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 6792 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0909+0835_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.807030Jy sigma=0.008482 ! Fit after self-cal, rms=0.766872Jy sigma=0.008055 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.832 mas, bmaj=8.827 mas, bpa=17.29 degrees ! Estimated noise=1004.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.183265 Jy ! Component: 100 - total flux cleaned = 0.223292 Jy ! Total flux subtracted in 100 components = 0.223292 Jy ! Clean residual min=-0.007885 max=0.011729 Jy/beam ! Clean residual mean=-0.000068 rms=0.002199 Jy/beam ! Combined flux in latest and established models = 0.223292 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.223292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089082Jy sigma=0.000849 ! Fit after self-cal, rms=0.089081Jy sigma=0.000849 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.678 mas, bmaj=9.844 mas, bpa=16.58 degrees ! Estimated noise=831.988 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139485 Jy ! Component: 100 - total flux cleaned = 0.020588 Jy ! Component: 150 - total flux cleaned = 0.0242792 Jy ! Component: 200 - total flux cleaned = 0.0264614 Jy ! Total flux subtracted in 200 components = 0.0264614 Jy ! Clean residual min=-0.005339 max=0.006441 Jy/beam ! Clean residual mean=-0.000040 rms=0.001532 Jy/beam ! Combined flux in latest and established models = 0.249753 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 40 components and 0.249753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086851Jy sigma=0.000828 ! Fit after self-cal, rms=0.086855Jy sigma=0.000828 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.89 HN 1.04 KP 1.06 ! LA 1.14 MK 1.00* NL 0.95 OV 0.98 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.09 KP 1.01 ! LA 1.08 MK 1.00* NL 0.98 OV 1.02 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.18 HN 1.10 KP 0.90 ! LA 0.86 MK 1.00* NL 0.95 OV 0.92 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.06 HN 1.06 KP 0.85 ! LA 0.80 MK 1.00* NL 1.04 OV 0.99 ! PT 1.04 SC 0.96 ! ! ! Fit before self-cal, rms=0.086855Jy sigma=0.000828 ! Fit after self-cal, rms=0.080584Jy sigma=0.000781 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.706 mas, bmaj=9.941 mas, bpa=16.97 degrees ! Estimated noise=826.535 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00363725 Jy ! Component: 100 - total flux cleaned = -0.00389945 Jy ! Component: 150 - total flux cleaned = -0.00396474 Jy ! Component: 200 - total flux cleaned = -0.00396014 Jy ! Total flux subtracted in 200 components = -0.00396014 Jy ! Clean residual min=-0.004113 max=0.004238 Jy/beam ! Clean residual mean=-0.000049 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.245793 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.245793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080317Jy sigma=0.000779 ! Fit after self-cal, rms=0.080329Jy sigma=0.000779 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080329Jy sigma=0.000779 ! Fit after self-cal, rms=0.082338Jy sigma=0.000770 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.693 mas, bmaj=9.943 mas, bpa=16.79 degrees ! Estimated noise=825.092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143638 Jy ! Component: 100 - total flux cleaned = -0.00187552 Jy ! Component: 150 - total flux cleaned = -0.00208753 Jy ! Component: 200 - total flux cleaned = -0.00212526 Jy ! Total flux subtracted in 200 components = -0.00212526 Jy ! Clean residual min=-0.002598 max=0.002446 Jy/beam ! Clean residual mean=-0.000027 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.243668 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 66 components and 0.243668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082271Jy sigma=0.000769 ! Fit after self-cal, rms=0.082335Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100648 Jy ! Component: 100 - total flux cleaned = -7.62961e-06 Jy ! Component: 150 - total flux cleaned = -6.0583e-06 Jy ! Component: 200 - total flux cleaned = -6.16584e-06 Jy ! Total flux subtracted in 200 components = -6.16584e-06 Jy ! Clean residual min=-0.002601 max=0.002433 Jy/beam ! Clean residual mean=-0.000028 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.243662 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 70 components and 0.243662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082320Jy sigma=0.000769 ! Fit after self-cal, rms=0.082321Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082321Jy sigma=0.000769 ! Fit after self-cal, rms=0.082669Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.694 mas, bmaj=9.957 mas, bpa=16.79 degrees ! Estimated noise=825.137 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000667036 Jy ! Component: 100 - total flux cleaned = -0.000829201 Jy ! Component: 150 - total flux cleaned = -0.000911898 Jy ! Component: 200 - total flux cleaned = -0.000912297 Jy ! Total flux subtracted in 200 components = -0.000912297 Jy ! Clean residual min=-0.002522 max=0.002389 Jy/beam ! Clean residual mean=-0.000024 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.242749 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.242749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082651Jy sigma=0.000769 ! Fit after self-cal, rms=0.082660Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.16196e-05 Jy ! Component: 100 - total flux cleaned = -4.42636e-06 Jy ! Component: 150 - total flux cleaned = -1.5848e-05 Jy ! Component: 200 - total flux cleaned = -1.56809e-05 Jy ! Total flux subtracted in 200 components = -1.56809e-05 Jy ! Clean residual min=-0.002519 max=0.002376 Jy/beam ! Clean residual mean=-0.000024 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.242734 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 80 components and 0.242734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082656Jy sigma=0.000768 ! Fit after self-cal, rms=0.082657Jy sigma=0.000768 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082657Jy sigma=0.000768 ! Fit after self-cal, rms=0.082843Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.19 mas, bmaj=12.01 mas, bpa=11.06 degrees ! Estimated noise=926.517 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0005553 Jy ! Component: 100 - total flux cleaned = -0.000589024 Jy ! Component: 150 - total flux cleaned = -0.000597778 Jy ! Component: 200 - total flux cleaned = -0.000583546 Jy ! Total flux subtracted in 200 components = -0.000583546 Jy ! Clean residual min=-0.002922 max=0.002402 Jy/beam ! Clean residual mean=-0.000037 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.24215 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 89 components and 0.24215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082839Jy sigma=0.000768 ! Fit after self-cal, rms=0.082843Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.87703e-05 Jy ! Component: 100 - total flux cleaned = -9.78539e-06 Jy ! Component: 150 - total flux cleaned = 7.87299e-07 Jy ! Component: 200 - total flux cleaned = 7.31865e-07 Jy ! Total flux subtracted in 200 components = 7.31865e-07 Jy ! Clean residual min=-0.002903 max=0.002396 Jy/beam ! Clean residual mean=-0.000037 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.242151 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 105 components and 0.242151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082842Jy sigma=0.000768 ! Fit after self-cal, rms=0.082842Jy sigma=0.000768 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.693 mas, bmaj=9.964 mas, bpa=16.82 degrees ! Estimated noise=825.219 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.693 x 9.964 at 16.82 degrees (North through East) ! Clean map min=-0.0024724 max=0.23511 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.829 mas, bmaj=8.91 mas, bpa=17.55 degrees ! Estimated noise=999.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.182185 Jy ! Component: 100 - total flux cleaned = 0.222183 Jy ! Component: 150 - total flux cleaned = 0.233791 Jy ! Component: 200 - total flux cleaned = 0.238489 Jy ! Total flux subtracted in 200 components = 0.238489 Jy ! Clean residual min=-0.003370 max=0.003100 Jy/beam ! Clean residual mean=-0.000027 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.238489 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.238489 Jy ! Inverting map and beam ! Estimated beam: bmin=4.693 mas, bmaj=9.964 mas, bpa=16.82 degrees ! Estimated noise=825.219 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240674 Jy ! Component: 100 - total flux cleaned = 0.00301184 Jy ! Component: 150 - total flux cleaned = 0.00338302 Jy ! Component: 200 - total flux cleaned = 0.00353352 Jy ! Total flux subtracted in 200 components = 0.00353352 Jy ! Clean residual min=-0.002525 max=0.002261 Jy/beam ! Clean residual mean=-0.000024 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.242023 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.242023 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.19 mas, bmaj=12.01 mas, bpa=11.06 degrees ! Estimated noise=926.517 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.63968e-05 Jy ! Component: 100 - total flux cleaned = 4.87069e-06 Jy ! Component: 150 - total flux cleaned = -1.92061e-05 Jy ! Component: 200 - total flux cleaned = -2.95663e-05 Jy ! Total flux subtracted in 200 components = -2.95663e-05 Jy ! Clean residual min=-0.003010 max=0.002432 Jy/beam ! Clean residual mean=-0.000038 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.241993 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.42063e-08 Jy ! Component: 100 - total flux cleaned = 3.02252e-08 Jy ! Component: 150 - total flux cleaned = 5.0186e-07 Jy ! Component: 200 - total flux cleaned = 8.44264e-06 Jy ! Total flux subtracted in 200 components = 8.44264e-06 Jy ! Clean residual min=-0.002988 max=0.002425 Jy/beam ! Clean residual mean=-0.000038 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.242001 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 42 components and 0.242001 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.693 mas, bmaj=9.964 mas, bpa=16.82 degrees ! Estimated noise=825.219 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154358 Jy ! Component: 100 - total flux cleaned = 0.000183481 Jy ! Component: 150 - total flux cleaned = 0.000210946 Jy ! Component: 200 - total flux cleaned = 0.000264081 Jy ! Total flux subtracted in 200 components = 0.000264081 Jy ! Clean residual min=-0.002401 max=0.002276 Jy/beam ! Clean residual mean=-0.000023 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.242266 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.242266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082877Jy sigma=0.000769 ! Fit after self-cal, rms=0.082876Jy sigma=0.000769 wmodel J0909+0835_S_2014_08_05_pus_map.mod ! Writing 48 model components to file: J0909+0835_S_2014_08_05_pus_map.mod wobs J0909+0835_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0909+0835_S_2014_08_05_pus_uvs.fits wwins J0909+0835_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J0909+0835_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000585869 Jy ! Component: 100 - total flux cleaned = -0.000317885 Jy ! Component: 150 - total flux cleaned = 3.80791e-06 Jy ! Component: 200 - total flux cleaned = 0.000271613 Jy ! Component: 250 - total flux cleaned = 0.000559794 Jy ! Component: 300 - total flux cleaned = 0.00077563 Jy ! Component: 350 - total flux cleaned = 0.000984995 Jy ! Component: 400 - total flux cleaned = 0.00124617 Jy ! Component: 450 - total flux cleaned = 0.00141538 Jy ! Component: 500 - total flux cleaned = 0.00141559 Jy ! Component: 550 - total flux cleaned = 0.00141627 Jy ! Component: 600 - total flux cleaned = 0.0014687 Jy ! Component: 650 - total flux cleaned = 0.00149364 Jy ! Component: 700 - total flux cleaned = 0.0013684 Jy ! Component: 750 - total flux cleaned = 0.00134438 Jy ! Component: 800 - total flux cleaned = 0.00120084 Jy ! Component: 850 - total flux cleaned = 0.00110695 Jy ! Component: 900 - total flux cleaned = 0.000968231 Jy ! Component: 950 - total flux cleaned = 0.000899935 Jy ! Component: 1000 - total flux cleaned = 0.000810506 Jy ! Component: 1050 - total flux cleaned = 0.000810511 Jy ! Component: 1100 - total flux cleaned = 0.00070241 Jy ! Component: 1150 - total flux cleaned = 0.000744965 Jy ! Component: 1200 - total flux cleaned = 0.000639915 Jy ! Component: 1250 - total flux cleaned = 0.000536689 Jy ! Component: 1300 - total flux cleaned = 0.000394895 Jy ! Component: 1350 - total flux cleaned = 0.000375202 Jy ! Component: 1400 - total flux cleaned = 0.000256808 Jy ! Component: 1450 - total flux cleaned = 0.000159689 Jy ! Component: 1500 - total flux cleaned = 8.2805e-05 Jy ! Component: 1550 - total flux cleaned = 6.40525e-05 Jy ! Component: 1600 - total flux cleaned = 7.96958e-06 Jy ! Component: 1650 - total flux cleaned = -0.00010255 Jy ! Component: 1700 - total flux cleaned = -0.000211749 Jy ! Component: 1750 - total flux cleaned = -0.000211557 Jy ! Component: 1800 - total flux cleaned = -0.000247446 Jy ! Component: 1850 - total flux cleaned = -0.000335284 Jy ! Component: 1900 - total flux cleaned = -0.000352364 Jy ! Component: 1950 - total flux cleaned = -0.000386758 Jy ! Component: 2000 - total flux cleaned = -0.000437545 Jy ! Component: 2050 - total flux cleaned = -0.000471046 Jy ! Component: 2100 - total flux cleaned = -0.000454628 Jy ! Component: 2150 - total flux cleaned = -0.000487564 Jy ! Component: 2200 - total flux cleaned = -0.00052022 Jy ! Component: 2250 - total flux cleaned = -0.000504248 Jy ! Component: 2300 - total flux cleaned = -0.00058372 Jy ! Component: 2350 - total flux cleaned = -0.00059932 Jy ! Component: 2400 - total flux cleaned = -0.000630606 Jy ! Component: 2450 - total flux cleaned = -0.000630407 Jy ! Component: 2500 - total flux cleaned = -0.000767667 Jy ! Component: 2550 - total flux cleaned = -0.000752498 Jy ! Component: 2600 - total flux cleaned = -0.000827529 Jy ! Component: 2650 - total flux cleaned = -0.000916446 Jy ! Component: 2700 - total flux cleaned = -0.000975135 Jy ! Component: 2750 - total flux cleaned = -0.00103325 Jy ! Component: 2800 - total flux cleaned = -0.00104762 Jy ! Component: 2850 - total flux cleaned = -0.00111891 Jy ! Component: 2900 - total flux cleaned = -0.00118927 Jy ! Component: 2950 - total flux cleaned = -0.00125916 Jy ! Component: 3000 - total flux cleaned = -0.00131466 Jy ! Component: 3050 - total flux cleaned = -0.00134226 Jy ! Component: 3100 - total flux cleaned = -0.00141039 Jy ! Component: 3150 - total flux cleaned = -0.00147778 Jy ! Component: 3200 - total flux cleaned = -0.00155785 Jy ! Component: 3250 - total flux cleaned = -0.00158442 Jy ! Component: 3300 - total flux cleaned = -0.00167624 Jy ! Component: 3350 - total flux cleaned = -0.00167625 Jy ! Component: 3400 - total flux cleaned = -0.00172792 Jy ! Component: 3450 - total flux cleaned = -0.00175371 Jy ! Component: 3500 - total flux cleaned = -0.00184236 Jy ! Component: 3550 - total flux cleaned = -0.00190506 Jy ! Component: 3600 - total flux cleaned = -0.00189269 Jy ! Component: 3650 - total flux cleaned = -0.00199141 Jy ! Component: 3700 - total flux cleaned = -0.00202799 Jy ! Component: 3750 - total flux cleaned = -0.0020886 Jy ! Component: 3800 - total flux cleaned = -0.00217271 Jy ! Component: 3850 - total flux cleaned = -0.00219641 Jy ! Component: 3900 - total flux cleaned = -0.00222007 Jy ! Component: 3950 - total flux cleaned = -0.00230233 Jy ! Component: 4000 - total flux cleaned = -0.00234881 Jy ! Component: 4050 - total flux cleaned = -0.00236033 Jy ! Total flux subtracted in 4096 components = -0.00240629 Jy ! Clean residual min=-0.000691 max=0.000714 Jy/beam ! Clean residual mean=-0.000005 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.239859 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 317 components and 0.239859 Jy ![Exited script file: muppet] wmap "J0909+0835_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.693 x 9.964 at 16.82 degrees (North through East) ! Clean map min=-0.002379 max=0.23527 Jy/beam ! Writing clean map to FITS file: J0909+0835_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.235271 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000222225 device "J0909+0835_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0909+0835_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.283365 0.283365 0.56673 1.13346 2.26692 4.53384 9.06767 18.1353 36.2707 72.5414 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.235 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.693 x 9.964 at 16.82 degrees (North through East) ! Clean map min=-0.002379 max=0.23527 Jy/beam quit ! Quitting program ! Log file J0909+0835_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:22:36 2016