! Started logfile: J0854+0720_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:22:16 2016 obs J0854+0720_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0854+0720_S_2014_08_05_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.684337 visibilities/baseline/integration-bin. ! Found source: J0854+0720 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 10224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0854+0720_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.940728Jy sigma=0.009321 ! Fit after self-cal, rms=0.908118Jy sigma=0.009038 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.685 mas, bmaj=8.864 mas, bpa=16.06 degrees ! Estimated noise=1163.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0725133 Jy ! Component: 100 - total flux cleaned = 0.0894465 Jy ! Total flux subtracted in 100 components = 0.0894465 Jy ! Clean residual min=-0.004172 max=0.006545 Jy/beam ! Clean residual mean=-0.000060 rms=0.001215 Jy/beam ! Combined flux in latest and established models = 0.0894466 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0894466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088825Jy sigma=0.000781 ! Fit after self-cal, rms=0.088772Jy sigma=0.000781 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.635 mas, bmaj=10.04 mas, bpa=16.27 degrees ! Estimated noise=718.433 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00900429 Jy ! Component: 100 - total flux cleaned = 0.0132064 Jy ! Component: 150 - total flux cleaned = 0.0155717 Jy ! Component: 200 - total flux cleaned = 0.0169623 Jy ! Total flux subtracted in 200 components = 0.0169623 Jy ! Clean residual min=-0.003220 max=0.003406 Jy/beam ! Clean residual mean=-0.000003 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.106409 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 46 components and 0.106409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087909Jy sigma=0.000772 ! Fit after self-cal, rms=0.087904Jy sigma=0.000772 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.85 HN 1.01 KP 1.05 ! LA 1.14 MK 1.00* NL 1.00 OV 0.96 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.09 HN 1.06 KP 0.99 ! LA 1.05 MK 1.00* NL 1.00 OV 1.04 ! PT 0.96 SC 1.06 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.14 HN 1.09 KP 0.92 ! LA 0.85 MK 1.00* NL 0.95 OV 0.93 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 1.13 KP 0.89 ! LA 0.86 MK 1.00* NL 1.06 OV 0.95 ! PT 1.00 SC 0.95 ! ! ! Fit before self-cal, rms=0.087904Jy sigma=0.000772 ! Fit after self-cal, rms=0.086623Jy sigma=0.000766 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.664 mas, bmaj=10.16 mas, bpa=16.56 degrees ! Estimated noise=714.608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140546 Jy ! Component: 100 - total flux cleaned = -0.00175655 Jy ! Component: 150 - total flux cleaned = -0.00175758 Jy ! Component: 200 - total flux cleaned = -0.00177893 Jy ! Total flux subtracted in 200 components = -0.00177893 Jy ! Clean residual min=-0.002910 max=0.002613 Jy/beam ! Clean residual mean=0.000001 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.10463 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.10463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086589Jy sigma=0.000766 ! Fit after self-cal, rms=0.086611Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086611Jy sigma=0.000765 ! Fit after self-cal, rms=0.091583Jy sigma=0.000764 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.642 mas, bmaj=10.17 mas, bpa=16.37 degrees ! Estimated noise=712.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000516737 Jy ! Component: 100 - total flux cleaned = -0.00057839 Jy ! Component: 150 - total flux cleaned = -0.000645597 Jy ! Component: 200 - total flux cleaned = -0.000687501 Jy ! Total flux subtracted in 200 components = -0.000687501 Jy ! Clean residual min=-0.002249 max=0.002177 Jy/beam ! Clean residual mean=0.000013 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.103942 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 0.103942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091570Jy sigma=0.000764 ! Fit after self-cal, rms=0.091653Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196411 Jy ! Component: 100 - total flux cleaned = -0.0002118 Jy ! Component: 150 - total flux cleaned = -0.000211616 Jy ! Component: 200 - total flux cleaned = -0.000211674 Jy ! Total flux subtracted in 200 components = -0.000211674 Jy ! Clean residual min=-0.002255 max=0.002150 Jy/beam ! Clean residual mean=0.000012 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.103731 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.103731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091649Jy sigma=0.000763 ! Fit after self-cal, rms=0.091649Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091649Jy sigma=0.000763 ! Fit after self-cal, rms=0.092810Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.629 mas, bmaj=10.18 mas, bpa=16.43 degrees ! Estimated noise=713.439 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125462 Jy ! Component: 100 - total flux cleaned = -0.000167782 Jy ! Component: 150 - total flux cleaned = -0.000221804 Jy ! Component: 200 - total flux cleaned = -0.000266465 Jy ! Total flux subtracted in 200 components = -0.000266465 Jy ! Clean residual min=-0.002155 max=0.002079 Jy/beam ! Clean residual mean=0.000014 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.103464 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 85 components and 0.103464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092804Jy sigma=0.000763 ! Fit after self-cal, rms=0.092819Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.25763e-05 Jy ! Component: 100 - total flux cleaned = -6.24504e-05 Jy ! Component: 150 - total flux cleaned = -6.9226e-05 Jy ! Component: 200 - total flux cleaned = -7.56413e-05 Jy ! Total flux subtracted in 200 components = -7.56413e-05 Jy ! Clean residual min=-0.002140 max=0.002067 Jy/beam ! Clean residual mean=0.000013 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.103389 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 93 components and 0.103389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092816Jy sigma=0.000763 ! Fit after self-cal, rms=0.092817Jy sigma=0.000763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092817Jy sigma=0.000763 ! Fit after self-cal, rms=0.093192Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.172 mas, bmaj=12.37 mas, bpa=13.1 degrees ! Estimated noise=806.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111534 Jy ! Component: 100 - total flux cleaned = -0.000109706 Jy ! Component: 150 - total flux cleaned = -0.000117667 Jy ! Component: 200 - total flux cleaned = -0.000131275 Jy ! Total flux subtracted in 200 components = -0.000131275 Jy ! Clean residual min=-0.002095 max=0.002022 Jy/beam ! Clean residual mean=0.000022 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.103257 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 105 components and 0.103257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093190Jy sigma=0.000763 ! Fit after self-cal, rms=0.093195Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.26195e-05 Jy ! Component: 100 - total flux cleaned = -3.30472e-05 Jy ! Component: 150 - total flux cleaned = -5.0613e-05 Jy ! Component: 200 - total flux cleaned = -5.58726e-05 Jy ! Total flux subtracted in 200 components = -5.58726e-05 Jy ! Clean residual min=-0.002093 max=0.002025 Jy/beam ! Clean residual mean=0.000022 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.103202 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 109 components and 0.103202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093194Jy sigma=0.000763 ! Fit after self-cal, rms=0.093196Jy sigma=0.000763 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.619 mas, bmaj=10.18 mas, bpa=16.48 degrees ! Estimated noise=713.744 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.619 x 10.18 at 16.48 degrees (North through East) ! Clean map min=-0.002023 max=0.094912 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.651 mas, bmaj=8.964 mas, bpa=16.31 degrees ! Estimated noise=1161.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.072255 Jy ! Component: 100 - total flux cleaned = 0.0893176 Jy ! Component: 150 - total flux cleaned = 0.0963774 Jy ! Component: 200 - total flux cleaned = 0.099765 Jy ! Total flux subtracted in 200 components = 0.099765 Jy ! Clean residual min=-0.002928 max=0.002961 Jy/beam ! Clean residual mean=0.000000 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.099765 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.099765 Jy ! Inverting map and beam ! Estimated beam: bmin=4.619 mas, bmaj=10.18 mas, bpa=16.48 degrees ! Estimated noise=713.744 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271873 Jy ! Component: 100 - total flux cleaned = 0.00359997 Jy ! Component: 150 - total flux cleaned = 0.00364826 Jy ! Component: 200 - total flux cleaned = 0.00364854 Jy ! Total flux subtracted in 200 components = 0.00364854 Jy ! Clean residual min=-0.002055 max=0.001981 Jy/beam ! Clean residual mean=0.000014 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.103414 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 51 components and 0.103414 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.172 mas, bmaj=12.37 mas, bpa=13.1 degrees ! Estimated noise=806.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.8693e-05 Jy ! Component: 100 - total flux cleaned = 0.000137525 Jy ! Component: 150 - total flux cleaned = 0.000137836 Jy ! Component: 200 - total flux cleaned = 7.26933e-05 Jy ! Total flux subtracted in 200 components = 7.26933e-05 Jy ! Clean residual min=-0.002154 max=0.001977 Jy/beam ! Clean residual mean=0.000022 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.103486 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.92246e-05 Jy ! Component: 100 - total flux cleaned = -9.3074e-05 Jy ! Component: 150 - total flux cleaned = -0.000144156 Jy ! Component: 200 - total flux cleaned = -0.000191707 Jy ! Total flux subtracted in 200 components = -0.000191707 Jy ! Clean residual min=-0.002180 max=0.001981 Jy/beam ! Clean residual mean=0.000022 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.103295 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 84 components and 0.103295 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.619 mas, bmaj=10.18 mas, bpa=16.48 degrees ! Estimated noise=713.744 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000354585 Jy ! Component: 100 - total flux cleaned = -0.000507816 Jy ! Component: 150 - total flux cleaned = -0.000508696 Jy ! Component: 200 - total flux cleaned = -0.000508487 Jy ! Total flux subtracted in 200 components = -0.000508487 Jy ! Clean residual min=-0.002002 max=0.001894 Jy/beam ! Clean residual mean=0.000013 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.102786 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 98 components and 0.102786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093135Jy sigma=0.000763 ! Fit after self-cal, rms=0.093118Jy sigma=0.000763 wmodel J0854+0720_S_2014_08_05_pus_map.mod ! Writing 98 model components to file: J0854+0720_S_2014_08_05_pus_map.mod wobs J0854+0720_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0854+0720_S_2014_08_05_pus_uvs.fits wwins J0854+0720_S_2014_08_05_pus_map.win ! wwins: Wrote 2 windows to J0854+0720_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 6.28312e-05 Jy ! Component: 100 - total flux cleaned = 0.000432536 Jy ! Component: 150 - total flux cleaned = 0.000528152 Jy ! Component: 200 - total flux cleaned = 0.000618468 Jy ! Component: 250 - total flux cleaned = 0.000618406 Jy ! Component: 300 - total flux cleaned = 0.000618532 Jy ! Component: 350 - total flux cleaned = 0.00067253 Jy ! Component: 400 - total flux cleaned = 0.000803672 Jy ! Component: 450 - total flux cleaned = 0.000931121 Jy ! Component: 500 - total flux cleaned = 0.00110469 Jy ! Component: 550 - total flux cleaned = 0.00124958 Jy ! Component: 600 - total flux cleaned = 0.00136713 Jy ! Component: 650 - total flux cleaned = 0.00143629 Jy ! Component: 700 - total flux cleaned = 0.00148194 Jy ! Component: 750 - total flux cleaned = 0.00159258 Jy ! Component: 800 - total flux cleaned = 0.00165726 Jy ! Component: 850 - total flux cleaned = 0.00169909 Jy ! Component: 900 - total flux cleaned = 0.00174076 Jy ! Component: 950 - total flux cleaned = 0.00182217 Jy ! Component: 1000 - total flux cleaned = 0.00188188 Jy ! Component: 1050 - total flux cleaned = 0.00192109 Jy ! Component: 1100 - total flux cleaned = 0.0019405 Jy ! Component: 1150 - total flux cleaned = 0.00194045 Jy ! Component: 1200 - total flux cleaned = 0.0019404 Jy ! Component: 1250 - total flux cleaned = 0.00194052 Jy ! Component: 1300 - total flux cleaned = 0.0019766 Jy ! Component: 1350 - total flux cleaned = 0.0019767 Jy ! Component: 1400 - total flux cleaned = 0.00197681 Jy ! Component: 1450 - total flux cleaned = 0.00202867 Jy ! Component: 1500 - total flux cleaned = 0.00204537 Jy ! Component: 1550 - total flux cleaned = 0.00201204 Jy ! Component: 1600 - total flux cleaned = 0.00206194 Jy ! Component: 1650 - total flux cleaned = 0.00206182 Jy ! Component: 1700 - total flux cleaned = 0.00207826 Jy ! Component: 1750 - total flux cleaned = 0.00214227 Jy ! Component: 1800 - total flux cleaned = 0.00215796 Jy ! Component: 1850 - total flux cleaned = 0.00215807 Jy ! Component: 1900 - total flux cleaned = 0.002189 Jy ! Component: 1950 - total flux cleaned = 0.00228055 Jy ! Component: 2000 - total flux cleaned = 0.00225016 Jy ! Component: 2050 - total flux cleaned = 0.00233984 Jy ! Component: 2100 - total flux cleaned = 0.00232491 Jy ! Component: 2150 - total flux cleaned = 0.00232495 Jy ! Component: 2200 - total flux cleaned = 0.00236827 Jy ! Component: 2250 - total flux cleaned = 0.00236808 Jy ! Component: 2300 - total flux cleaned = 0.00235387 Jy ! Component: 2350 - total flux cleaned = 0.00239611 Jy ! Component: 2400 - total flux cleaned = 0.0024099 Jy ! Component: 2450 - total flux cleaned = 0.00245146 Jy ! Component: 2500 - total flux cleaned = 0.00247882 Jy ! Component: 2550 - total flux cleaned = 0.00249231 Jy ! Component: 2600 - total flux cleaned = 0.00250568 Jy ! Component: 2650 - total flux cleaned = 0.00254559 Jy ! Component: 2700 - total flux cleaned = 0.00255885 Jy ! Component: 2750 - total flux cleaned = 0.00258493 Jy ! Component: 2800 - total flux cleaned = 0.00255911 Jy ! Component: 2850 - total flux cleaned = 0.00257196 Jy ! Component: 2900 - total flux cleaned = 0.00259715 Jy ! Component: 2950 - total flux cleaned = 0.00257192 Jy ! Component: 3000 - total flux cleaned = 0.0025843 Jy ! Component: 3050 - total flux cleaned = 0.00255949 Jy ! Component: 3100 - total flux cleaned = 0.00255952 Jy ! Component: 3150 - total flux cleaned = 0.00254719 Jy ! Component: 3200 - total flux cleaned = 0.00254721 Jy ! Component: 3250 - total flux cleaned = 0.00251102 Jy ! Component: 3300 - total flux cleaned = 0.00251108 Jy ! Component: 3350 - total flux cleaned = 0.00248731 Jy ! Component: 3400 - total flux cleaned = 0.00246372 Jy ! Component: 3450 - total flux cleaned = 0.00244026 Jy ! Component: 3500 - total flux cleaned = 0.0023938 Jy ! Component: 3550 - total flux cleaned = 0.00238223 Jy ! Component: 3600 - total flux cleaned = 0.00233651 Jy ! Component: 3650 - total flux cleaned = 0.00233647 Jy ! Component: 3700 - total flux cleaned = 0.00231376 Jy ! Component: 3750 - total flux cleaned = 0.00230244 Jy ! Component: 3800 - total flux cleaned = 0.00223563 Jy ! Component: 3850 - total flux cleaned = 0.00223573 Jy ! Component: 3900 - total flux cleaned = 0.00219189 Jy ! Component: 3950 - total flux cleaned = 0.0021483 Jy ! Component: 4000 - total flux cleaned = 0.0021375 Jy ! Component: 4050 - total flux cleaned = 0.00213728 Jy ! Total flux subtracted in 4096 components = 0.00203001 Jy ! Clean residual min=-0.000602 max=0.000631 Jy/beam ! Clean residual mean=0.000002 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.104816 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 398 components and 0.104816 Jy ![Exited script file: muppet] wmap "J0854+0720_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.619 x 10.18 at 16.48 degrees (North through East) ! Clean map min=-0.0015025 max=0.094847 Jy/beam ! Writing clean map to FITS file: J0854+0720_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0948468 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000210041 device "J0854+0720_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0854+0720_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.664358 0.664358 1.32872 2.65743 5.31487 10.6297 21.2595 42.5189 85.0379 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.094 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.619 x 10.18 at 16.48 degrees (North through East) ! Clean map min=-0.0015025 max=0.094847 Jy/beam quit ! Quitting program ! Log file J0854+0720_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:22:21 2016