! Started logfile: J0853+0654_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:22:10 2016
obs J0853+0654_S_2014_08_05_pus_uva.fits
! Reading UV FITS file: J0853+0654_S_2014_08_05_pus_uva.fits
! AN table 1: 83 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.66158 visibilities/baseline/integration-bin.
! Found source: J0853+0654
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 360 lines of history.
! 
! Reading 9884 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0853+0654_S_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.527457Jy  sigma=0.005106
! Fit after  self-cal, rms=0.355008Jy  sigma=0.003282
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.702 mas, bmaj=8.807 mas, bpa=16.18 degrees
! Estimated noise=939.149 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.533458 Jy
! Component: 100  -  total flux cleaned = 0.649982 Jy
! Total flux subtracted in 100 components = 0.649982 Jy
! Clean residual min=-0.022207 max=0.039823 Jy/beam
! Clean residual mean=-0.000432 rms=0.007118 Jy/beam
! Combined flux in latest and established models = 0.649982 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.649982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.172618Jy  sigma=0.001356
! Fit after  self-cal, rms=0.172617Jy  sigma=0.001356
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.593 mas, bmaj=10.03 mas, bpa=16.45 degrees
! Estimated noise=740.993 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0442321 Jy
! Component: 100  -  total flux cleaned = 0.0657622 Jy
! Component: 150  -  total flux cleaned = 0.0776432 Jy
! Component: 200  -  total flux cleaned = 0.084798 Jy
! Total flux subtracted in 200 components = 0.084798 Jy
! Clean residual min=-0.017892 max=0.027182 Jy/beam
! Clean residual mean=-0.000091 rms=0.005770 Jy/beam
! Combined flux in latest and established models = 0.73478 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 41 components and 0.73478 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160915Jy  sigma=0.001238
! Fit after  self-cal, rms=0.160911Jy  sigma=0.001238
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.87     HN        1.07     KP        1.05     
!   LA        1.12     MK        1.00*    NL        0.94     OV        0.99     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.11     KP        1.00     
!   LA        1.07     MK        1.00*    NL        0.90     OV        1.02     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.16     HN        1.10     KP        0.89     
!   LA        0.86     MK        1.00*    NL        0.96     OV        0.94     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        1.14     KP        0.86     
!   LA        0.80     MK        1.00*    NL        1.06     OV        0.99     
!   PT        1.02     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.160911Jy  sigma=0.001238
! Fit after  self-cal, rms=0.132080Jy  sigma=0.000981
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.636 mas, bmaj=10.16 mas, bpa=16.97 degrees
! Estimated noise=733.728 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0147239 Jy
! Component: 100  -  total flux cleaned = -0.0182187 Jy
! Component: 150  -  total flux cleaned = -0.0184783 Jy
! Component: 200  -  total flux cleaned = -0.018696 Jy
! Total flux subtracted in 200 components = -0.018696 Jy
! Clean residual min=-0.013522 max=0.017252 Jy/beam
! Clean residual mean=-0.000095 rms=0.004193 Jy/beam
! Combined flux in latest and established models = 0.716084 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 53 components and 0.716084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128741Jy  sigma=0.000969
! Fit after  self-cal, rms=0.128756Jy  sigma=0.000969
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128756Jy  sigma=0.000969
! Fit after  self-cal, rms=0.109645Jy  sigma=0.000808
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.608 mas, bmaj=10.14 mas, bpa=16.5 degrees
! Estimated noise=731.437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00491322 Jy
! Component: 100  -  total flux cleaned = -0.00544529 Jy
! Component: 150  -  total flux cleaned = -0.00604776 Jy
! Component: 200  -  total flux cleaned = -0.00666737 Jy
! Total flux subtracted in 200 components = -0.00666737 Jy
! Clean residual min=-0.004515 max=0.003982 Jy/beam
! Clean residual mean=-0.000039 rms=0.000980 Jy/beam
! Combined flux in latest and established models = 0.709416 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 61 components and 0.709416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109001Jy  sigma=0.000800
! Fit after  self-cal, rms=0.109167Jy  sigma=0.000800
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.21345e-06 Jy
! Component: 100  -  total flux cleaned = -9.09581e-06 Jy
! Component: 150  -  total flux cleaned = 7.06389e-05 Jy
! Component: 200  -  total flux cleaned = 6.68425e-05 Jy
! Total flux subtracted in 200 components = 6.68425e-05 Jy
! Clean residual min=-0.004054 max=0.003444 Jy/beam
! Clean residual mean=-0.000040 rms=0.000903 Jy/beam
! Combined flux in latest and established models = 0.709483 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 64 components and 0.709483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109054Jy  sigma=0.000798
! Fit after  self-cal, rms=0.109051Jy  sigma=0.000798
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109051Jy  sigma=0.000798
! Fit after  self-cal, rms=0.109888Jy  sigma=0.000797
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.599 mas, bmaj=10.15 mas, bpa=16.54 degrees
! Estimated noise=731.248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00182087 Jy
! Component: 100  -  total flux cleaned = -0.00191508 Jy
! Component: 150  -  total flux cleaned = -0.00211954 Jy
! Component: 200  -  total flux cleaned = -0.00235822 Jy
! Total flux subtracted in 200 components = -0.00235822 Jy
! Clean residual min=-0.003653 max=0.002629 Jy/beam
! Clean residual mean=-0.000025 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.707125 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 70 components and 0.707125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109735Jy  sigma=0.000795
! Fit after  self-cal, rms=0.109746Jy  sigma=0.000795
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000210741 Jy
! Component: 100  -  total flux cleaned = -0.000304759 Jy
! Component: 150  -  total flux cleaned = -0.000388484 Jy
! Component: 200  -  total flux cleaned = -0.000387381 Jy
! Total flux subtracted in 200 components = -0.000387381 Jy
! Clean residual min=-0.003470 max=0.002434 Jy/beam
! Clean residual mean=-0.000026 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.706738 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 77 components and 0.706738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109716Jy  sigma=0.000794
! Fit after  self-cal, rms=0.109715Jy  sigma=0.000794
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109715Jy  sigma=0.000794
! Fit after  self-cal, rms=0.110209Jy  sigma=0.000794
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.09 mas, bmaj=12.35 mas, bpa=13.95 degrees
! Estimated noise=827.701 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000870639 Jy
! Component: 100  -  total flux cleaned = -0.000919627 Jy
! Component: 150  -  total flux cleaned = -0.000922002 Jy
! Component: 200  -  total flux cleaned = -0.00095576 Jy
! Total flux subtracted in 200 components = -0.00095576 Jy
! Clean residual min=-0.003211 max=0.002250 Jy/beam
! Clean residual mean=-0.000033 rms=0.000672 Jy/beam
! Combined flux in latest and established models = 0.705782 Jy
selfcal
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 78 components and 0.705782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110166Jy  sigma=0.000793
! Fit after  self-cal, rms=0.110171Jy  sigma=0.000793
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.47507e-05 Jy
! Component: 100  -  total flux cleaned = -4.3931e-05 Jy
! Component: 150  -  total flux cleaned = -4.43199e-05 Jy
! Component: 200  -  total flux cleaned = -7.07772e-05 Jy
! Total flux subtracted in 200 components = -7.07772e-05 Jy
! Clean residual min=-0.003087 max=0.002192 Jy/beam
! Clean residual mean=-0.000034 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.705711 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 79 components and 0.705711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110167Jy  sigma=0.000793
! Fit after  self-cal, rms=0.110166Jy  sigma=0.000793
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.593 mas, bmaj=10.16 mas, bpa=16.56 degrees
! Estimated noise=731.1 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.593 x 10.16 at 16.56 degrees (North through East)
! Clean map  min=-0.0030799  max=0.68069 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110166Jy  sigma=0.000793
! Fit after  self-cal, rms=0.103166Jy  sigma=0.000702
! Inverting map and beam 
! Estimated beam: bmin=4.588 mas, bmaj=10.16 mas, bpa=16.59 degrees
! Estimated noise=731.205 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.60127e-05 Jy
! Component: 100  -  total flux cleaned = 5.00344e-05 Jy
! Component: 150  -  total flux cleaned = 1.71481e-05 Jy
! Component: 200  -  total flux cleaned = -1.41952e-05 Jy
! Total flux subtracted in 200 components = -1.41952e-05 Jy
! Clean residual min=-0.003063 max=0.002068 Jy/beam
! Clean residual mean=-0.000018 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.705697 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 82 components and 0.705697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103145Jy  sigma=0.000702
! Fit after  self-cal, rms=0.103145Jy  sigma=0.000702
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.54491e-05 Jy
! Component: 100  -  total flux cleaned = -5.40275e-05 Jy
! Component: 150  -  total flux cleaned = -7.95252e-05 Jy
! Component: 200  -  total flux cleaned = -0.000104043 Jy
! Total flux subtracted in 200 components = -0.000104043 Jy
! Clean residual min=-0.002972 max=0.002065 Jy/beam
! Clean residual mean=-0.000018 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.705593 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 84 components and 0.705593 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103133Jy  sigma=0.000701
! Fit after  self-cal, rms=0.103133Jy  sigma=0.000701
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103133Jy  sigma=0.000701
! Fit after  self-cal, rms=0.103249Jy  sigma=0.000701
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.683 mas, bmaj=8.885 mas, bpa=16.27 degrees
! Estimated noise=931.602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.528974 Jy
! Component: 100  -  total flux cleaned = 0.644351 Jy
! Component: 150  -  total flux cleaned = 0.674463 Jy
! Component: 200  -  total flux cleaned = 0.687717 Jy
! Total flux subtracted in 200 components = 0.687717 Jy
! Clean residual min=-0.004127 max=0.006137 Jy/beam
! Clean residual mean=-0.000073 rms=0.001008 Jy/beam
! Combined flux in latest and established models = 0.687717 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.687717 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.585 mas, bmaj=10.16 mas, bpa=16.6 degrees
! Estimated noise=731.156 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00834627 Jy
! Component: 100  -  total flux cleaned = 0.0126186 Jy
! Component: 150  -  total flux cleaned = 0.0149047 Jy
! Component: 200  -  total flux cleaned = 0.0155901 Jy
! Total flux subtracted in 200 components = 0.0155901 Jy
! Clean residual min=-0.002670 max=0.002136 Jy/beam
! Clean residual mean=-0.000026 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.703307 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 46 components and 0.703307 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.085 mas, bmaj=12.35 mas, bpa=14.06 degrees
! Estimated noise=828.435 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125986 Jy
! Component: 100  -  total flux cleaned = 0.00142375 Jy
! Component: 150  -  total flux cleaned = 0.00152353 Jy
! Component: 200  -  total flux cleaned = 0.00154053 Jy
! Total flux subtracted in 200 components = 0.00154053 Jy
! Clean residual min=-0.002807 max=0.002170 Jy/beam
! Clean residual mean=-0.000035 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.704848 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.86848e-07 Jy
! Component: 100  -  total flux cleaned = 1.48965e-05 Jy
! Component: 150  -  total flux cleaned = 1.48998e-05 Jy
! Component: 200  -  total flux cleaned = 1.57542e-05 Jy
! Total flux subtracted in 200 components = 1.57542e-05 Jy
! Clean residual min=-0.002832 max=0.002170 Jy/beam
! Clean residual mean=-0.000035 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.704863 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 62 components and 0.704863 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.585 mas, bmaj=10.16 mas, bpa=16.6 degrees
! Estimated noise=731.156 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000382672 Jy
! Component: 100  -  total flux cleaned = -0.000413793 Jy
! Component: 150  -  total flux cleaned = -0.00033407 Jy
! Component: 200  -  total flux cleaned = -0.000284495 Jy
! Total flux subtracted in 200 components = -0.000284495 Jy
! Clean residual min=-0.002606 max=0.002133 Jy/beam
! Clean residual mean=-0.000022 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.704579 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 70 components and 0.704579 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103226Jy  sigma=0.000701
! Fit after  self-cal, rms=0.103226Jy  sigma=0.000701
wmodel J0853+0654_S_2014_08_05_pus_map.mod
! Writing 70 model components to file: J0853+0654_S_2014_08_05_pus_map.mod
wobs J0853+0654_S_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J0853+0654_S_2014_08_05_pus_uvs.fits
wwins J0853+0654_S_2014_08_05_pus_map.win
! wwins: Wrote 1 windows to J0853+0654_S_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000567044 Jy
! Component: 100  -  total flux cleaned = -0.000826551 Jy
! Component: 150  -  total flux cleaned = -0.00117392 Jy
! Component: 200  -  total flux cleaned = -0.001568 Jy
! Component: 250  -  total flux cleaned = -0.0018195 Jy
! Component: 300  -  total flux cleaned = -0.00203209 Jy
! Component: 350  -  total flux cleaned = -0.00226728 Jy
! Component: 400  -  total flux cleaned = -0.00246685 Jy
! Component: 450  -  total flux cleaned = -0.0026877 Jy
! Component: 500  -  total flux cleaned = -0.00282108 Jy
! Component: 550  -  total flux cleaned = -0.00295135 Jy
! Component: 600  -  total flux cleaned = -0.00310448 Jy
! Component: 650  -  total flux cleaned = -0.00322874 Jy
! Component: 700  -  total flux cleaned = -0.00330225 Jy
! Component: 750  -  total flux cleaned = -0.00344502 Jy
! Component: 800  -  total flux cleaned = -0.00353816 Jy
! Component: 850  -  total flux cleaned = -0.00360722 Jy
! Component: 900  -  total flux cleaned = -0.00374245 Jy
! Component: 950  -  total flux cleaned = -0.00380845 Jy
! Component: 1000  -  total flux cleaned = -0.00389517 Jy
! Component: 1050  -  total flux cleaned = -0.00389569 Jy
! Component: 1100  -  total flux cleaned = -0.00402201 Jy
! Component: 1150  -  total flux cleaned = -0.00412506 Jy
! Component: 1200  -  total flux cleaned = -0.00412478 Jy
! Component: 1250  -  total flux cleaned = -0.00424443 Jy
! Component: 1300  -  total flux cleaned = -0.00428363 Jy
! Component: 1350  -  total flux cleaned = -0.00439991 Jy
! Component: 1400  -  total flux cleaned = -0.00447639 Jy
! Component: 1450  -  total flux cleaned = -0.00455198 Jy
! Component: 1500  -  total flux cleaned = -0.00466334 Jy
! Component: 1550  -  total flux cleaned = -0.0047181 Jy
! Component: 1600  -  total flux cleaned = -0.0048261 Jy
! Component: 1650  -  total flux cleaned = -0.00486166 Jy
! Component: 1700  -  total flux cleaned = -0.00498438 Jy
! Component: 1750  -  total flux cleaned = -0.00501899 Jy
! Component: 1800  -  total flux cleaned = -0.00507032 Jy
! Component: 1850  -  total flux cleaned = -0.00517122 Jy
! Component: 1900  -  total flux cleaned = -0.00522105 Jy
! Component: 1950  -  total flux cleaned = -0.00535181 Jy
! Component: 2000  -  total flux cleaned = -0.0053838 Jy
! Component: 2050  -  total flux cleaned = -0.00539972 Jy
! Component: 2100  -  total flux cleaned = -0.00544712 Jy
! Component: 2150  -  total flux cleaned = -0.00549405 Jy
! Component: 2200  -  total flux cleaned = -0.00555586 Jy
! Component: 2250  -  total flux cleaned = -0.00555581 Jy
! Component: 2300  -  total flux cleaned = -0.00558627 Jy
! Component: 2350  -  total flux cleaned = -0.00560132 Jy
! Component: 2400  -  total flux cleaned = -0.00564539 Jy
! Component: 2450  -  total flux cleaned = -0.00564557 Jy
! Component: 2500  -  total flux cleaned = -0.00573192 Jy
! Component: 2550  -  total flux cleaned = -0.00573178 Jy
! Component: 2600  -  total flux cleaned = -0.00571768 Jy
! Component: 2650  -  total flux cleaned = -0.00578752 Jy
! Component: 2700  -  total flux cleaned = -0.00574611 Jy
! Component: 2750  -  total flux cleaned = -0.00574635 Jy
! Component: 2800  -  total flux cleaned = -0.00577353 Jy
! Component: 2850  -  total flux cleaned = -0.00576012 Jy
! Component: 2900  -  total flux cleaned = -0.00577351 Jy
! Component: 2950  -  total flux cleaned = -0.00576025 Jy
! Component: 3000  -  total flux cleaned = -0.0057471 Jy
! Component: 3050  -  total flux cleaned = -0.00575991 Jy
! Component: 3100  -  total flux cleaned = -0.00572126 Jy
! Component: 3150  -  total flux cleaned = -0.00570862 Jy
! Component: 3200  -  total flux cleaned = -0.00567078 Jy
! Component: 3250  -  total flux cleaned = -0.00569574 Jy
! Component: 3300  -  total flux cleaned = -0.0056583 Jy
! Component: 3350  -  total flux cleaned = -0.00567064 Jy
! Component: 3400  -  total flux cleaned = -0.00564631 Jy
! Component: 3450  -  total flux cleaned = -0.0056463 Jy
! Component: 3500  -  total flux cleaned = -0.00564625 Jy
! Component: 3550  -  total flux cleaned = -0.00559845 Jy
! Component: 3600  -  total flux cleaned = -0.00557497 Jy
! Component: 3650  -  total flux cleaned = -0.00558669 Jy
! Component: 3700  -  total flux cleaned = -0.00559838 Jy
! Component: 3750  -  total flux cleaned = -0.00557522 Jy
! Component: 3800  -  total flux cleaned = -0.00560972 Jy
! Component: 3850  -  total flux cleaned = -0.00555249 Jy
! Component: 3900  -  total flux cleaned = -0.0055299 Jy
! Component: 3950  -  total flux cleaned = -0.0055186 Jy
! Component: 4000  -  total flux cleaned = -0.00548498 Jy
! Component: 4050  -  total flux cleaned = -0.00548493 Jy
! Total flux subtracted in 4096 components = -0.00546288 Jy
! Clean residual min=-0.000574 max=0.000723 Jy/beam
! Clean residual mean=-0.000004 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.699116 Jy
keep
! Adding 296 model components to the UV plane model.
! The established model now contains 366 components and 0.699116 Jy
![Exited script file: muppet]
wmap "J0853+0654_S_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.585 x 10.16 at 16.6 degrees (North through East)
! Clean map  min=-0.0022111  max=0.68143 Jy/beam
! Writing clean map to FITS file: J0853+0654_S_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.681427 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000212617 
device "J0853+0654_S_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J0853+0654_S_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0936052 0.0936052 0.18721 0.374421 0.748841 1.49768 2.99537 5.99073 11.9815 23.9629 47.9258 95.8517
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.681 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.585 x 10.16 at 16.6 degrees (North through East)
! Clean map  min=-0.0022111  max=0.68143 Jy/beam
quit
! Quitting program
! Log file J0853+0654_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:22:16 2016