! Started logfile: J0743-0440_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:20:25 2016
obs J0743-0440_S_2014_08_05_pus_uva.fits
! Reading UV FITS file: J0743-0440_S_2014_08_05_pus_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.770062 visibilities/baseline/integration-bin.
! Found source: J0743-0440
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 360 lines of history.
! 
! Reading 9980 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0743-0440_S_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 86 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.879023Jy  sigma=0.007841
! Fit after  self-cal, rms=0.852748Jy  sigma=0.007661
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.436 mas, bmaj=10.14 mas, bpa=21.2 degrees
! Estimated noise=1124.1 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.120924 Jy
! Component: 100  -  total flux cleaned = 0.148372 Jy
! Total flux subtracted in 100 components = 0.148372 Jy
! Clean residual min=-0.006364 max=0.009954 Jy/beam
! Clean residual mean=0.000014 rms=0.001714 Jy/beam
! Combined flux in latest and established models = 0.148372 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.148372 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164090Jy  sigma=0.000848
! Fit after  self-cal, rms=0.163993Jy  sigma=0.000848
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.106 mas, bmaj=11.07 mas, bpa=19.71 degrees
! Estimated noise=827.927 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108801 Jy
! Component: 100  -  total flux cleaned = 0.0153166 Jy
! Component: 150  -  total flux cleaned = 0.0176091 Jy
! Component: 200  -  total flux cleaned = 0.0190206 Jy
! Total flux subtracted in 200 components = 0.0190206 Jy
! Clean residual min=-0.004120 max=0.006330 Jy/beam
! Clean residual mean=0.000010 rms=0.001233 Jy/beam
! Combined flux in latest and established models = 0.167393 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 56 components and 0.167393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.162881Jy  sigma=0.000842
! Fit after  self-cal, rms=0.162860Jy  sigma=0.000842
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.99     KP        1.02     
!   LA        1.06     MK        1.00*    NL        0.92     OV        1.04     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.20     HN        1.05     KP        0.98     
!   LA        1.05     MK        1.00*    NL        0.98     OV        1.10     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.19     HN        0.98     KP        0.87     
!   LA        0.85     MK        1.00*    NL        1.00     OV        0.95     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.06     HN        1.02     KP        0.82     
!   LA        0.82     MK        1.00*    NL        1.09     OV        1.05     
!   PT        1.01     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.162860Jy  sigma=0.000842
! Fit after  self-cal, rms=0.167102Jy  sigma=0.000827
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.119 mas, bmaj=11.06 mas, bpa=19.61 degrees
! Estimated noise=836.465 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000212742 Jy
! Component: 100  -  total flux cleaned = 0.000159118 Jy
! Component: 150  -  total flux cleaned = 0.00011488 Jy
! Component: 200  -  total flux cleaned = 0.000148763 Jy
! Total flux subtracted in 200 components = 0.000148763 Jy
! Clean residual min=-0.003311 max=0.004466 Jy/beam
! Clean residual mean=0.000006 rms=0.000989 Jy/beam
! Combined flux in latest and established models = 0.167542 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 79 components and 0.167542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.166977Jy  sigma=0.000828
! Fit after  self-cal, rms=0.167073Jy  sigma=0.000827
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.167073Jy  sigma=0.000827
! Fit after  self-cal, rms=0.230674Jy  sigma=0.000819
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.126 mas, bmaj=11.08 mas, bpa=19.68 degrees
! Estimated noise=843.95 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000757399 Jy
! Component: 100  -  total flux cleaned = 0.000755916 Jy
! Component: 150  -  total flux cleaned = 0.000661534 Jy
! Component: 200  -  total flux cleaned = 0.000607432 Jy
! Total flux subtracted in 200 components = 0.000607432 Jy
! Clean residual min=-0.002999 max=0.004327 Jy/beam
! Clean residual mean=0.000006 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.168149 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 90 components and 0.168149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.230587Jy  sigma=0.000819
! Fit after  self-cal, rms=0.231146Jy  sigma=0.000819
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10, -25.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00359659 Jy
! Component: 100  -  total flux cleaned = 0.00484417 Jy
! Component: 150  -  total flux cleaned = 0.0053192 Jy
! Component: 200  -  total flux cleaned = 0.00547382 Jy
! Total flux subtracted in 200 components = 0.00547382 Jy
! Clean residual min=-0.002872 max=0.003179 Jy/beam
! Clean residual mean=0.000004 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 0.173623 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 122 components and 0.173623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.230973Jy  sigma=0.000818
! Fit after  self-cal, rms=0.230908Jy  sigma=0.000818
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.230908Jy  sigma=0.000818
! Fit after  self-cal, rms=0.235684Jy  sigma=0.000818
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.128 mas, bmaj=11.06 mas, bpa=19.6 degrees
! Estimated noise=849.834 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155167 Jy
! Component: 100  -  total flux cleaned = 0.00183233 Jy
! Component: 150  -  total flux cleaned = 0.00188109 Jy
! Component: 200  -  total flux cleaned = 0.0018812 Jy
! Total flux subtracted in 200 components = 0.0018812 Jy
! Clean residual min=-0.002827 max=0.003009 Jy/beam
! Clean residual mean=0.000004 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.175504 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 145 components and 0.175504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.235579Jy  sigma=0.000818
! Fit after  self-cal, rms=0.235562Jy  sigma=0.000818
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000280857 Jy
! Component: 100  -  total flux cleaned = 0.000197919 Jy
! Component: 150  -  total flux cleaned = 0.000159518 Jy
! Component: 200  -  total flux cleaned = 0.000197144 Jy
! Total flux subtracted in 200 components = 0.000197144 Jy
! Clean residual min=-0.002852 max=0.002929 Jy/beam
! Clean residual mean=0.000004 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.175701 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 161 components and 0.175701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.235506Jy  sigma=0.000818
! Fit after  self-cal, rms=0.235488Jy  sigma=0.000818
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.235488Jy  sigma=0.000818
! Fit after  self-cal, rms=0.234568Jy  sigma=0.000818
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.738 mas, bmaj=13.7 mas, bpa=10.39 degrees
! Estimated noise=987.832 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144129 Jy
! Component: 100  -  total flux cleaned = 0.00182317 Jy
! Component: 150  -  total flux cleaned = 0.00195792 Jy
! Component: 200  -  total flux cleaned = 0.00207425 Jy
! Total flux subtracted in 200 components = 0.00207425 Jy
! Clean residual min=-0.003140 max=0.003865 Jy/beam
! Clean residual mean=0.000006 rms=0.001007 Jy/beam
! Combined flux in latest and established models = 0.177775 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 177 components and 0.177775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.234465Jy  sigma=0.000818
! Fit after  self-cal, rms=0.234411Jy  sigma=0.000818
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000121913 Jy
! Component: 100  -  total flux cleaned = 5.53255e-05 Jy
! Component: 150  -  total flux cleaned = 2.39003e-05 Jy
! Component: 200  -  total flux cleaned = -6.16491e-05 Jy
! Total flux subtracted in 200 components = -6.16491e-05 Jy
! Clean residual min=-0.003153 max=0.003917 Jy/beam
! Clean residual mean=0.000006 rms=0.001011 Jy/beam
! Combined flux in latest and established models = 0.177714 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 192 components and 0.177714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.234371Jy  sigma=0.000818
! Fit after  self-cal, rms=0.234346Jy  sigma=0.000818
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.128 mas, bmaj=11.06 mas, bpa=19.58 degrees
! Estimated noise=856.366 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.128 x 11.06 at 19.58 degrees (North through East)
! Clean map  min=-0.0050519  max=0.16368 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.457 mas, bmaj=10.11 mas, bpa=21.1 degrees
! Estimated noise=1156.39 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.124335 Jy
! Component: 100  -  total flux cleaned = 0.152439 Jy
! Component: 150  -  total flux cleaned = 0.162647 Jy
! Component: 200  -  total flux cleaned = 0.167084 Jy
! Total flux subtracted in 200 components = 0.167084 Jy
! Clean residual min=-0.004220 max=0.004092 Jy/beam
! Clean residual mean=0.000008 rms=0.001106 Jy/beam
! Combined flux in latest and established models = 0.167084 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.167084 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.128 mas, bmaj=11.06 mas, bpa=19.58 degrees
! Estimated noise=856.366 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00315647 Jy
! Component: 100  -  total flux cleaned = 0.00445796 Jy
! Component: 150  -  total flux cleaned = 0.00533984 Jy
! Component: 200  -  total flux cleaned = 0.00619429 Jy
! Total flux subtracted in 200 components = 0.00619429 Jy
! Clean residual min=-0.002988 max=0.003131 Jy/beam
! Clean residual mean=0.000005 rms=0.000844 Jy/beam
! Combined flux in latest and established models = 0.173278 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 69 components and 0.173278 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.738 mas, bmaj=13.7 mas, bpa=10.39 degrees
! Estimated noise=987.832 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00202824 Jy
! Component: 100  -  total flux cleaned = 0.00270183 Jy
! Component: 150  -  total flux cleaned = 0.00320809 Jy
! Component: 200  -  total flux cleaned = 0.00364999 Jy
! Total flux subtracted in 200 components = 0.00364999 Jy
! Clean residual min=-0.003054 max=0.003872 Jy/beam
! Clean residual mean=0.000006 rms=0.001029 Jy/beam
! Combined flux in latest and established models = 0.176928 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017004 Jy
! Component: 100  -  total flux cleaned = 0.000272774 Jy
! Component: 150  -  total flux cleaned = 0.000367027 Jy
! Component: 200  -  total flux cleaned = 0.000410136 Jy
! Total flux subtracted in 200 components = 0.000410136 Jy
! Clean residual min=-0.003037 max=0.003930 Jy/beam
! Clean residual mean=0.000006 rms=0.001016 Jy/beam
! Combined flux in latest and established models = 0.177338 Jy
! Adding 73 model components to the UV plane model.
! The established model now contains 129 components and 0.177338 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.128 mas, bmaj=11.06 mas, bpa=19.58 degrees
! Estimated noise=856.366 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000144086 Jy
! Component: 100  -  total flux cleaned = 1.20475e-05 Jy
! Component: 150  -  total flux cleaned = 0.000153561 Jy
! Component: 200  -  total flux cleaned = 0.000285932 Jy
! Total flux subtracted in 200 components = 0.000285932 Jy
! Clean residual min=-0.002880 max=0.002999 Jy/beam
! Clean residual mean=0.000004 rms=0.000794 Jy/beam
! Combined flux in latest and established models = 0.177624 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 155 components and 0.177624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.234385Jy  sigma=0.000818
! Fit after  self-cal, rms=0.234395Jy  sigma=0.000818
wmodel J0743-0440_S_2014_08_05_pus_map.mod
! Writing 155 model components to file: J0743-0440_S_2014_08_05_pus_map.mod
wobs J0743-0440_S_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J0743-0440_S_2014_08_05_pus_uvs.fits
wwins J0743-0440_S_2014_08_05_pus_map.win
! wwins: Wrote 2 windows to J0743-0440_S_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000545005 Jy
! Component: 100  -  total flux cleaned = 0.000891551 Jy
! Component: 150  -  total flux cleaned = 0.00145657 Jy
! Component: 200  -  total flux cleaned = 0.00194997 Jy
! Component: 250  -  total flux cleaned = 0.00225092 Jy
! Component: 300  -  total flux cleaned = 0.00241743 Jy
! Component: 350  -  total flux cleaned = 0.00253793 Jy
! Component: 400  -  total flux cleaned = 0.00257731 Jy
! Component: 450  -  total flux cleaned = 0.00276763 Jy
! Component: 500  -  total flux cleaned = 0.00287901 Jy
! Component: 550  -  total flux cleaned = 0.00302395 Jy
! Component: 600  -  total flux cleaned = 0.00305953 Jy
! Component: 650  -  total flux cleaned = 0.00302503 Jy
! Component: 700  -  total flux cleaned = 0.00302498 Jy
! Component: 750  -  total flux cleaned = 0.00295756 Jy
! Component: 800  -  total flux cleaned = 0.00295736 Jy
! Component: 850  -  total flux cleaned = 0.00282726 Jy
! Component: 900  -  total flux cleaned = 0.00279529 Jy
! Component: 950  -  total flux cleaned = 0.00273201 Jy
! Component: 1000  -  total flux cleaned = 0.00282596 Jy
! Component: 1050  -  total flux cleaned = 0.00282573 Jy
! Component: 1100  -  total flux cleaned = 0.0028263 Jy
! Component: 1150  -  total flux cleaned = 0.00291567 Jy
! Component: 1200  -  total flux cleaned = 0.00288547 Jy
! Component: 1250  -  total flux cleaned = 0.00282678 Jy
! Component: 1300  -  total flux cleaned = 0.00279806 Jy
! Component: 1350  -  total flux cleaned = 0.0028555 Jy
! Component: 1400  -  total flux cleaned = 0.00288367 Jy
! Component: 1450  -  total flux cleaned = 0.00277099 Jy
! Component: 1500  -  total flux cleaned = 0.00271553 Jy
! Component: 1550  -  total flux cleaned = 0.00277124 Jy
! Component: 1600  -  total flux cleaned = 0.00277119 Jy
! Component: 1650  -  total flux cleaned = 0.00279827 Jy
! Component: 1700  -  total flux cleaned = 0.00271747 Jy
! Component: 1750  -  total flux cleaned = 0.00277119 Jy
! Component: 1800  -  total flux cleaned = 0.00274482 Jy
! Component: 1850  -  total flux cleaned = 0.00282349 Jy
! Component: 1900  -  total flux cleaned = 0.00282362 Jy
! Component: 1950  -  total flux cleaned = 0.00284951 Jy
! Component: 2000  -  total flux cleaned = 0.00287519 Jy
! Component: 2050  -  total flux cleaned = 0.00287531 Jy
! Component: 2100  -  total flux cleaned = 0.00295102 Jy
! Component: 2150  -  total flux cleaned = 0.00305084 Jy
! Component: 2200  -  total flux cleaned = 0.0030756 Jy
! Component: 2250  -  total flux cleaned = 0.00302606 Jy
! Component: 2300  -  total flux cleaned = 0.00305067 Jy
! Component: 2350  -  total flux cleaned = 0.00305068 Jy
! Component: 2400  -  total flux cleaned = 0.00305071 Jy
! Component: 2450  -  total flux cleaned = 0.00305084 Jy
! Component: 2500  -  total flux cleaned = 0.00305101 Jy
! Component: 2550  -  total flux cleaned = 0.00305117 Jy
! Component: 2600  -  total flux cleaned = 0.00309775 Jy
! Component: 2650  -  total flux cleaned = 0.00307445 Jy
! Component: 2700  -  total flux cleaned = 0.00309753 Jy
! Component: 2750  -  total flux cleaned = 0.00309742 Jy
! Component: 2800  -  total flux cleaned = 0.00309748 Jy
! Component: 2850  -  total flux cleaned = 0.00312021 Jy
! Component: 2900  -  total flux cleaned = 0.00314279 Jy
! Component: 2950  -  total flux cleaned = 0.0031428 Jy
! Component: 3000  -  total flux cleaned = 0.00309821 Jy
! Component: 3050  -  total flux cleaned = 0.00318694 Jy
! Component: 3100  -  total flux cleaned = 0.00323109 Jy
! Component: 3150  -  total flux cleaned = 0.00316544 Jy
! Component: 3200  -  total flux cleaned = 0.00314375 Jy
! Component: 3250  -  total flux cleaned = 0.00316564 Jy
! Component: 3300  -  total flux cleaned = 0.00316576 Jy
! Component: 3350  -  total flux cleaned = 0.00310175 Jy
! Component: 3400  -  total flux cleaned = 0.00312308 Jy
! Component: 3450  -  total flux cleaned = 0.00310193 Jy
! Component: 3500  -  total flux cleaned = 0.00299683 Jy
! Component: 3550  -  total flux cleaned = 0.0029968 Jy
! Component: 3600  -  total flux cleaned = 0.00293459 Jy
! Component: 3650  -  total flux cleaned = 0.00293453 Jy
! Component: 3700  -  total flux cleaned = 0.00289339 Jy
! Component: 3750  -  total flux cleaned = 0.00279123 Jy
! Component: 3800  -  total flux cleaned = 0.00283212 Jy
! Component: 3850  -  total flux cleaned = 0.00283218 Jy
! Component: 3900  -  total flux cleaned = 0.00291249 Jy
! Component: 3950  -  total flux cleaned = 0.00285224 Jy
! Component: 4000  -  total flux cleaned = 0.00285205 Jy
! Component: 4050  -  total flux cleaned = 0.00281235 Jy
! Total flux subtracted in 4096 components = 0.00279271 Jy
! Clean residual min=-0.001198 max=0.001091 Jy/beam
! Clean residual mean=0.000004 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.180417 Jy
keep
! Adding 324 model components to the UV plane model.
! The established model now contains 479 components and 0.180417 Jy
![Exited script file: muppet]
wmap "J0743-0440_S_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.128 x 11.06 at 19.58 degrees (North through East)
! Clean map  min=-0.0044527  max=0.16417 Jy/beam
! Writing clean map to FITS file: J0743-0440_S_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.164167 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000420088 
device "J0743-0440_S_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J0743-0440_S_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.767672 0.767672 1.53534 3.07069 6.14138 12.2828 24.5655 49.131 98.262
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0012 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.164 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.128 x 11.06 at 19.58 degrees (North through East)
! Clean map  min=-0.0044527  max=0.16417 Jy/beam
quit
! Quitting program
! Log file J0743-0440_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:20:30 2016