! Started logfile: J0735+2341_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:19:43 2016 obs J0735+2341_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0735+2341_S_2014_08_05_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.690334 visibilities/baseline/integration-bin. ! Found source: J0735+2341 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 15284 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0735+2341_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.934953Jy sigma=0.010292 ! Fit after self-cal, rms=0.895453Jy sigma=0.009848 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.883 mas, bmaj=8.615 mas, bpa=2.792 degrees ! Estimated noise=1038.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0813508 Jy ! Component: 100 - total flux cleaned = 0.123324 Jy ! Total flux subtracted in 100 components = 0.123324 Jy ! Clean residual min=-0.021979 max=0.028454 Jy/beam ! Clean residual mean=-0.000024 rms=0.006789 Jy/beam ! Combined flux in latest and established models = 0.123324 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.123324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150413Jy sigma=0.001575 ! Fit after self-cal, rms=0.149493Jy sigma=0.001567 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.757 mas, bmaj=9.429 mas, bpa=0.4754 degrees ! Estimated noise=527.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.046515 Jy ! Component: 100 - total flux cleaned = 0.075992 Jy ! Component: 150 - total flux cleaned = 0.0956681 Jy ! Component: 200 - total flux cleaned = 0.109041 Jy ! Total flux subtracted in 200 components = 0.109041 Jy ! Clean residual min=-0.022306 max=0.031595 Jy/beam ! Clean residual mean=-0.000031 rms=0.007406 Jy/beam ! Combined flux in latest and established models = 0.232365 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 58 components and 0.232365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132053Jy sigma=0.001363 ! Fit after self-cal, rms=0.130710Jy sigma=0.001349 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.13 HN 1.05 KP 0.74 ! LA 0.84 MK 1.00* NL 1.19 OV 1.59 ! PT 0.90 SC 0.85 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.34 HN 1.04 KP 0.76 ! LA 0.80 MK 1.00* NL 1.26 OV 1.85 ! PT 0.86 SC 0.94 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.44 HN 1.01 KP 0.71 ! LA 0.67 MK 1.00* NL 1.15 OV 1.89 ! PT 0.80 SC 1.17 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.08 HN 0.97 KP 0.78 ! LA 0.72 MK 1.00* NL 1.24 OV 1.47 ! PT 0.73 SC 1.40 ! ! ! Fit before self-cal, rms=0.130710Jy sigma=0.001349 ! Fit after self-cal, rms=0.138842Jy sigma=0.001202 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.911 mas, bmaj=9.38 mas, bpa=0.1516 degrees ! Estimated noise=512.135 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00166722 Jy ! Component: 100 - total flux cleaned = -0.00170121 Jy ! Component: 150 - total flux cleaned = -0.00148087 Jy ! Component: 200 - total flux cleaned = -0.00138672 Jy ! Total flux subtracted in 200 components = -0.00138672 Jy ! Clean residual min=-0.016131 max=0.023787 Jy/beam ! Clean residual mean=0.000079 rms=0.005558 Jy/beam ! Combined flux in latest and established models = 0.230978 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 67 components and 0.230978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138465Jy sigma=0.001199 ! Fit after self-cal, rms=0.140370Jy sigma=0.001191 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140370Jy sigma=0.001191 ! Fit after self-cal, rms=0.197726Jy sigma=0.001112 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.269 mas, bmaj=8.967 mas, bpa=-4.538 degrees ! Estimated noise=521.468 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.37528e-05 Jy ! Component: 100 - total flux cleaned = 4.4668e-05 Jy ! Component: 150 - total flux cleaned = -0.000296476 Jy ! Component: 200 - total flux cleaned = -0.000492237 Jy ! Total flux subtracted in 200 components = -0.000492237 Jy ! Clean residual min=-0.013690 max=0.021171 Jy/beam ! Clean residual mean=0.000055 rms=0.004822 Jy/beam ! Combined flux in latest and established models = 0.230486 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 79 components and 0.230486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197384Jy sigma=0.001110 ! Fit after self-cal, rms=0.198430Jy sigma=0.001108 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-73, 39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019765 Jy ! Component: 100 - total flux cleaned = 0.0249552 Jy ! Component: 150 - total flux cleaned = 0.0267332 Jy ! Component: 200 - total flux cleaned = 0.0267168 Jy ! Total flux subtracted in 200 components = 0.0267168 Jy ! Clean residual min=-0.012025 max=0.019749 Jy/beam ! Clean residual mean=0.000041 rms=0.004240 Jy/beam ! Combined flux in latest and established models = 0.257203 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 107 components and 0.257203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194327Jy sigma=0.001070 ! Fit after self-cal, rms=0.192979Jy sigma=0.001061 ! Inverting map ! Added new window around map position (-126, 123). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184127 Jy ! Component: 100 - total flux cleaned = 0.0289121 Jy ! Component: 150 - total flux cleaned = 0.0337538 Jy ! Component: 200 - total flux cleaned = 0.035649 Jy ! Total flux subtracted in 200 components = 0.035649 Jy ! Clean residual min=-0.012540 max=0.017477 Jy/beam ! Clean residual mean=0.000041 rms=0.003946 Jy/beam ! Combined flux in latest and established models = 0.292852 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 148 components and 0.292852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187975Jy sigma=0.001038 ! Fit after self-cal, rms=0.187039Jy sigma=0.001032 ! Inverting map ! Added new window around map position (32.5, 57). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015905 Jy ! Component: 100 - total flux cleaned = 0.0255967 Jy ! Component: 150 - total flux cleaned = 0.033184 Jy ! Component: 200 - total flux cleaned = 0.0371065 Jy ! Total flux subtracted in 200 components = 0.0371065 Jy ! Clean residual min=-0.011832 max=0.013187 Jy/beam ! Clean residual mean=-0.000014 rms=0.003553 Jy/beam ! Combined flux in latest and established models = 0.329958 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 188 components and 0.329958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183384Jy sigma=0.001010 ! Fit after self-cal, rms=0.182030Jy sigma=0.001005 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182030Jy sigma=0.001005 ! Fit after self-cal, rms=0.139338Jy sigma=0.000972 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.357 mas, bmaj=9.11 mas, bpa=-2.65 degrees ! Estimated noise=496.579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00973697 Jy ! Component: 100 - total flux cleaned = 0.0151636 Jy ! Component: 150 - total flux cleaned = 0.0195726 Jy ! Component: 200 - total flux cleaned = 0.02269 Jy ! Total flux subtracted in 200 components = 0.02269 Jy ! Clean residual min=-0.011135 max=0.012649 Jy/beam ! Clean residual mean=-0.000029 rms=0.002980 Jy/beam ! Combined flux in latest and established models = 0.352648 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 215 components and 0.352648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137551Jy sigma=0.000959 ! Fit after self-cal, rms=0.136833Jy sigma=0.000956 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-77.5, -54.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00661206 Jy ! Component: 100 - total flux cleaned = 0.00742348 Jy ! Component: 150 - total flux cleaned = 0.00741461 Jy ! Component: 200 - total flux cleaned = 0.00780076 Jy ! Total flux subtracted in 200 components = 0.00780076 Jy ! Clean residual min=-0.010205 max=0.009667 Jy/beam ! Clean residual mean=-0.000040 rms=0.002711 Jy/beam ! Combined flux in latest and established models = 0.360449 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 246 components and 0.360449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134856Jy sigma=0.000938 ! Fit after self-cal, rms=0.134173Jy sigma=0.000935 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134173Jy sigma=0.000935 ! Fit after self-cal, rms=0.131436Jy sigma=0.000930 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.047 mas, bmaj=10.54 mas, bpa=-19.99 degrees ! Estimated noise=510.651 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00557291 Jy ! Component: 100 - total flux cleaned = 0.00672217 Jy ! Component: 150 - total flux cleaned = 0.00752112 Jy ! Component: 200 - total flux cleaned = 0.0080693 Jy ! Total flux subtracted in 200 components = 0.0080693 Jy ! Clean residual min=-0.009606 max=0.009602 Jy/beam ! Clean residual mean=-0.000044 rms=0.002811 Jy/beam ! Combined flux in latest and established models = 0.368518 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 277 components and 0.368518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130366Jy sigma=0.000925 ! Fit after self-cal, rms=0.129964Jy sigma=0.000923 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296033 Jy ! Component: 100 - total flux cleaned = 0.0029513 Jy ! Component: 150 - total flux cleaned = 0.0027993 Jy ! Component: 200 - total flux cleaned = 0.00265358 Jy ! Total flux subtracted in 200 components = 0.00265358 Jy ! Clean residual min=-0.009887 max=0.009065 Jy/beam ! Clean residual mean=-0.000046 rms=0.002720 Jy/beam ! Combined flux in latest and established models = 0.371172 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 300 components and 0.371172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129317Jy sigma=0.000920 ! Fit after self-cal, rms=0.129084Jy sigma=0.000919 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.443 mas, bmaj=9.169 mas, bpa=-3.426 degrees ! Estimated noise=496.29 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.443 x 9.169 at -3.426 degrees (North through East) ! Clean map min=-0.0085716 max=0.11069 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.533 mas, bmaj=8.24 mas, bpa=-0.4617 degrees ! Estimated noise=1009.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0781281 Jy ! Component: 100 - total flux cleaned = 0.122256 Jy ! Component: 150 - total flux cleaned = 0.153922 Jy ! Component: 200 - total flux cleaned = 0.180339 Jy ! Total flux subtracted in 200 components = 0.180339 Jy ! Clean residual min=-0.016724 max=0.020176 Jy/beam ! Clean residual mean=0.000010 rms=0.005308 Jy/beam ! Combined flux in latest and established models = 0.180339 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.180339 Jy ! Inverting map and beam ! Estimated beam: bmin=6.443 mas, bmaj=9.169 mas, bpa=-3.426 degrees ! Estimated noise=496.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0286357 Jy ! Component: 100 - total flux cleaned = 0.0512043 Jy ! Component: 150 - total flux cleaned = 0.0691745 Jy ! Component: 200 - total flux cleaned = 0.0841899 Jy ! Total flux subtracted in 200 components = 0.0841899 Jy ! Clean residual min=-0.012462 max=0.014356 Jy/beam ! Clean residual mean=-0.000005 rms=0.004145 Jy/beam ! Combined flux in latest and established models = 0.264529 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 94 components and 0.264529 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.047 mas, bmaj=10.54 mas, bpa=-19.99 degrees ! Estimated noise=510.651 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187016 Jy ! Component: 100 - total flux cleaned = 0.0322619 Jy ! Component: 150 - total flux cleaned = 0.0434556 Jy ! Component: 200 - total flux cleaned = 0.0513174 Jy ! Total flux subtracted in 200 components = 0.0513174 Jy ! Clean residual min=-0.012013 max=0.013871 Jy/beam ! Clean residual mean=-0.000027 rms=0.003715 Jy/beam ! Combined flux in latest and established models = 0.315846 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00656811 Jy ! Component: 100 - total flux cleaned = 0.0131865 Jy ! Component: 150 - total flux cleaned = 0.0183851 Jy ! Component: 200 - total flux cleaned = 0.0230752 Jy ! Total flux subtracted in 200 components = 0.0230752 Jy ! Clean residual min=-0.010236 max=0.011782 Jy/beam ! Clean residual mean=-0.000031 rms=0.003136 Jy/beam ! Combined flux in latest and established models = 0.338921 Jy ! Adding 103 model components to the UV plane model. ! The established model now contains 182 components and 0.338921 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.443 mas, bmaj=9.169 mas, bpa=-3.426 degrees ! Estimated noise=496.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214655 Jy ! Component: 100 - total flux cleaned = 0.00416876 Jy ! Component: 150 - total flux cleaned = 0.00532879 Jy ! Component: 200 - total flux cleaned = 0.00662464 Jy ! Total flux subtracted in 200 components = 0.00662464 Jy ! Clean residual min=-0.009396 max=0.009998 Jy/beam ! Clean residual mean=-0.000032 rms=0.002640 Jy/beam ! Combined flux in latest and established models = 0.345546 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 217 components and 0.345546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130967Jy sigma=0.000931 ! Fit after self-cal, rms=0.131071Jy sigma=0.000928 wmodel J0735+2341_S_2014_08_05_pus_map.mod ! Writing 217 model components to file: J0735+2341_S_2014_08_05_pus_map.mod wobs J0735+2341_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0735+2341_S_2014_08_05_pus_uvs.fits wwins J0735+2341_S_2014_08_05_pus_map.win ! wwins: Wrote 5 windows to J0735+2341_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319486 Jy ! Component: 100 - total flux cleaned = 0.00527458 Jy ! Component: 150 - total flux cleaned = 0.00542689 Jy ! Component: 200 - total flux cleaned = 0.0058537 Jy ! Component: 250 - total flux cleaned = 0.00653516 Jy ! Component: 300 - total flux cleaned = 0.00692968 Jy ! Component: 350 - total flux cleaned = 0.00718366 Jy ! Component: 400 - total flux cleaned = 0.00705845 Jy ! Component: 450 - total flux cleaned = 0.00730164 Jy ! Component: 500 - total flux cleaned = 0.00777721 Jy ! Component: 550 - total flux cleaned = 0.00835646 Jy ! Component: 600 - total flux cleaned = 0.00892388 Jy ! Component: 650 - total flux cleaned = 0.00937015 Jy ! Component: 700 - total flux cleaned = 0.0097009 Jy ! Component: 750 - total flux cleaned = 0.0105591 Jy ! Component: 800 - total flux cleaned = 0.0116097 Jy ! Component: 850 - total flux cleaned = 0.0122303 Jy ! Component: 900 - total flux cleaned = 0.0133498 Jy ! Component: 950 - total flux cleaned = 0.0139518 Jy ! Component: 1000 - total flux cleaned = 0.0148407 Jy ! Component: 1050 - total flux cleaned = 0.0154257 Jy ! Component: 1100 - total flux cleaned = 0.0165791 Jy ! Component: 1150 - total flux cleaned = 0.0175279 Jy ! Component: 1200 - total flux cleaned = 0.0184626 Jy ! Component: 1250 - total flux cleaned = 0.0190152 Jy ! Component: 1300 - total flux cleaned = 0.0197451 Jy ! Component: 1350 - total flux cleaned = 0.0202846 Jy ! Component: 1400 - total flux cleaned = 0.0209974 Jy ! Component: 1450 - total flux cleaned = 0.0214386 Jy ! Component: 1500 - total flux cleaned = 0.0220486 Jy ! Component: 1550 - total flux cleaned = 0.0226514 Jy ! Component: 1600 - total flux cleaned = 0.0232471 Jy ! Component: 1650 - total flux cleaned = 0.0238356 Jy ! Component: 1700 - total flux cleaned = 0.0243347 Jy ! Component: 1750 - total flux cleaned = 0.0246641 Jy ! Component: 1800 - total flux cleaned = 0.0252338 Jy ! Component: 1850 - total flux cleaned = 0.0257986 Jy ! Component: 1900 - total flux cleaned = 0.0262775 Jy ! Component: 1950 - total flux cleaned = 0.0269878 Jy ! Component: 2000 - total flux cleaned = 0.0273779 Jy ! Component: 2050 - total flux cleaned = 0.0280741 Jy ! Component: 2100 - total flux cleaned = 0.0286089 Jy ! Component: 2150 - total flux cleaned = 0.0294423 Jy ! Component: 2200 - total flux cleaned = 0.0298938 Jy ! Component: 2250 - total flux cleaned = 0.0308611 Jy ! Component: 2300 - total flux cleaned = 0.0312296 Jy ! Component: 2350 - total flux cleaned = 0.0317426 Jy ! Component: 2400 - total flux cleaned = 0.0325406 Jy ! Component: 2450 - total flux cleaned = 0.0332593 Jy ! Component: 2500 - total flux cleaned = 0.0339002 Jy ! Component: 2550 - total flux cleaned = 0.0343946 Jy ! Component: 2600 - total flux cleaned = 0.0348841 Jy ! Component: 2650 - total flux cleaned = 0.03544 Jy ! Component: 2700 - total flux cleaned = 0.0361292 Jy ! Component: 2750 - total flux cleaned = 0.0364707 Jy ! Component: 2800 - total flux cleaned = 0.0370136 Jy ! Component: 2850 - total flux cleaned = 0.0375517 Jy ! Component: 2900 - total flux cleaned = 0.0379518 Jy ! Component: 2950 - total flux cleaned = 0.03868 Jy ! Component: 3000 - total flux cleaned = 0.0390086 Jy ! Component: 3050 - total flux cleaned = 0.0396593 Jy ! Component: 3100 - total flux cleaned = 0.0401114 Jy ! Component: 3150 - total flux cleaned = 0.0404962 Jy ! Component: 3200 - total flux cleaned = 0.0410682 Jy ! Component: 3250 - total flux cleaned = 0.0414473 Jy ! Component: 3300 - total flux cleaned = 0.0420732 Jy ! Component: 3350 - total flux cleaned = 0.0425695 Jy ! Component: 3400 - total flux cleaned = 0.0430002 Jy ! Component: 3450 - total flux cleaned = 0.0434891 Jy ! Component: 3500 - total flux cleaned = 0.0440354 Jy ! Component: 3550 - total flux cleaned = 0.0444565 Jy ! Component: 3600 - total flux cleaned = 0.044934 Jy ! Component: 3650 - total flux cleaned = 0.0452304 Jy ! Component: 3700 - total flux cleaned = 0.0457019 Jy ! Component: 3750 - total flux cleaned = 0.0460528 Jy ! Component: 3800 - total flux cleaned = 0.0465747 Jy ! Component: 3850 - total flux cleaned = 0.0469776 Jy ! Component: 3900 - total flux cleaned = 0.0472636 Jy ! Component: 3950 - total flux cleaned = 0.0476613 Jy ! Component: 4000 - total flux cleaned = 0.0481116 Jy ! Component: 4050 - total flux cleaned = 0.0483918 Jy ! Total flux subtracted in 4096 components = 0.0488919 Jy ! Clean residual min=-0.002870 max=0.003765 Jy/beam ! Clean residual mean=-0.000011 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.394438 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 522 components and 0.394438 Jy ![Exited script file: muppet] wmap "J0735+2341_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.443 x 9.169 at -3.426 degrees (North through East) ! Clean map min=-0.0082529 max=0.10668 Jy/beam ! Writing clean map to FITS file: J0735+2341_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.106681 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00108631 device "J0735+2341_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0735+2341_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.05482 3.05482 6.10963 12.2193 24.4385 48.8771 97.7541 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0032 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.106 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.443 x 9.169 at -3.426 degrees (North through East) ! Clean map min=-0.0082529 max=0.10668 Jy/beam quit ! Quitting program ! Log file J0735+2341_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:19:49 2016