! Started logfile: J0713+1935_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:18:39 2016 obs J0713+1935_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0713+1935_S_2014_08_05_pus_uva.fits ! AN table 1: 71 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.772144 visibilities/baseline/integration-bin. ! Found source: J0713+1935 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 9868 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0713+1935_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.904575Jy sigma=0.010101 ! Fit after self-cal, rms=0.886532Jy sigma=0.009935 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.982 mas, bmaj=7.984 mas, bpa=15.76 degrees ! Estimated noise=970.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0876009 Jy ! Component: 100 - total flux cleaned = 0.107625 Jy ! Total flux subtracted in 100 components = 0.107625 Jy ! Clean residual min=-0.004592 max=0.007382 Jy/beam ! Clean residual mean=-0.000002 rms=0.001374 Jy/beam ! Combined flux in latest and established models = 0.107625 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.107625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082193Jy sigma=0.000803 ! Fit after self-cal, rms=0.082176Jy sigma=0.000803 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.627 mas, bmaj=8.941 mas, bpa=14.98 degrees ! Estimated noise=651.259 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104108 Jy ! Component: 100 - total flux cleaned = 0.0156214 Jy ! Component: 150 - total flux cleaned = 0.0189327 Jy ! Component: 200 - total flux cleaned = 0.0211365 Jy ! Total flux subtracted in 200 components = 0.0211365 Jy ! Clean residual min=-0.003450 max=0.003484 Jy/beam ! Clean residual mean=0.000007 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.128762 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 40 components and 0.128762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080676Jy sigma=0.000788 ! Fit after self-cal, rms=0.080667Jy sigma=0.000788 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.85 HN 0.98 KP 1.08 ! LA 1.10 MK 1.00* NL 0.86 OV 1.00 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.04 KP 1.01 ! LA 1.05 MK 1.00* NL 1.03 OV 1.02 ! PT 0.99 SC 1.09 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.14 HN 1.07 KP 0.92 ! LA 0.86 MK 1.00* NL 1.04 OV 0.92 ! PT 0.98 SC 1.09 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.05 HN 1.02 KP 0.89 ! LA 0.83 MK 1.00* NL 1.12 OV 0.97 ! PT 1.04 SC 1.02 ! ! ! Fit before self-cal, rms=0.080667Jy sigma=0.000788 ! Fit after self-cal, rms=0.077410Jy sigma=0.000776 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.687 mas, bmaj=8.997 mas, bpa=14.83 degrees ! Estimated noise=649.252 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.96901e-05 Jy ! Component: 100 - total flux cleaned = 0.000134253 Jy ! Component: 150 - total flux cleaned = 0.000190627 Jy ! Component: 200 - total flux cleaned = 0.000164583 Jy ! Total flux subtracted in 200 components = 0.000164583 Jy ! Clean residual min=-0.002737 max=0.002687 Jy/beam ! Clean residual mean=0.000000 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.128927 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.128927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077363Jy sigma=0.000776 ! Fit after self-cal, rms=0.077363Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077363Jy sigma=0.000775 ! Fit after self-cal, rms=0.077068Jy sigma=0.000768 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.656 mas, bmaj=8.974 mas, bpa=14.97 degrees ! Estimated noise=647.969 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.13621e-05 Jy ! Component: 100 - total flux cleaned = -0.00011674 Jy ! Component: 150 - total flux cleaned = -0.000156606 Jy ! Component: 200 - total flux cleaned = -0.000142008 Jy ! Total flux subtracted in 200 components = -0.000142008 Jy ! Clean residual min=-0.001843 max=0.001973 Jy/beam ! Clean residual mean=0.000003 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.128785 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 64 components and 0.128785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077056Jy sigma=0.000768 ! Fit after self-cal, rms=0.077070Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.88756e-05 Jy ! Component: 100 - total flux cleaned = 2.04766e-05 Jy ! Component: 150 - total flux cleaned = -1.92609e-06 Jy ! Component: 200 - total flux cleaned = -1.16308e-05 Jy ! Total flux subtracted in 200 components = -1.16308e-05 Jy ! Clean residual min=-0.001852 max=0.001965 Jy/beam ! Clean residual mean=0.000003 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.128773 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 0.128773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077067Jy sigma=0.000768 ! Fit after self-cal, rms=0.077066Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077066Jy sigma=0.000768 ! Fit after self-cal, rms=0.077140Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.655 mas, bmaj=8.959 mas, bpa=14.85 degrees ! Estimated noise=647.666 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.17161e-05 Jy ! Component: 100 - total flux cleaned = -3.91174e-05 Jy ! Component: 150 - total flux cleaned = -5.12231e-05 Jy ! Component: 200 - total flux cleaned = -4.22112e-05 Jy ! Total flux subtracted in 200 components = -4.22112e-05 Jy ! Clean residual min=-0.001837 max=0.001951 Jy/beam ! Clean residual mean=0.000003 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.128731 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 0.128731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077137Jy sigma=0.000768 ! Fit after self-cal, rms=0.077134Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.0504e-05 Jy ! Component: 100 - total flux cleaned = 4.43644e-05 Jy ! Component: 150 - total flux cleaned = 2.97737e-05 Jy ! Component: 200 - total flux cleaned = 2.97001e-05 Jy ! Total flux subtracted in 200 components = 2.97001e-05 Jy ! Clean residual min=-0.001839 max=0.001951 Jy/beam ! Clean residual mean=0.000003 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.12876 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 76 components and 0.12876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077133Jy sigma=0.000768 ! Fit after self-cal, rms=0.077133Jy sigma=0.000768 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077133Jy sigma=0.000768 ! Fit after self-cal, rms=0.077155Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.438 mas, bmaj=10.51 mas, bpa=8.934 degrees ! Estimated noise=715.346 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135877 Jy ! Component: 100 - total flux cleaned = 7.81873e-05 Jy ! Component: 150 - total flux cleaned = 4.59003e-05 Jy ! Component: 200 - total flux cleaned = 2.78065e-05 Jy ! Total flux subtracted in 200 components = 2.78065e-05 Jy ! Clean residual min=-0.001896 max=0.002211 Jy/beam ! Clean residual mean=0.000003 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.128788 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 77 components and 0.128788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077154Jy sigma=0.000768 ! Fit after self-cal, rms=0.077152Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.75949e-07 Jy ! Component: 100 - total flux cleaned = -8.15389e-06 Jy ! Component: 150 - total flux cleaned = -2.12678e-06 Jy ! Component: 200 - total flux cleaned = -2.25141e-06 Jy ! Total flux subtracted in 200 components = -2.25141e-06 Jy ! Clean residual min=-0.001893 max=0.002210 Jy/beam ! Clean residual mean=0.000003 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.128786 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 81 components and 0.128786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077153Jy sigma=0.000768 ! Fit after self-cal, rms=0.077152Jy sigma=0.000768 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.656 mas, bmaj=8.951 mas, bpa=14.78 degrees ! Estimated noise=647.455 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.656 x 8.951 at 14.78 degrees (North through East) ! Clean map min=-0.001819 max=0.11309 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.99 mas, bmaj=8.023 mas, bpa=15.49 degrees ! Estimated noise=966.668 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.087105 Jy ! Component: 100 - total flux cleaned = 0.10736 Jy ! Component: 150 - total flux cleaned = 0.115181 Jy ! Component: 200 - total flux cleaned = 0.119193 Jy ! Total flux subtracted in 200 components = 0.119193 Jy ! Clean residual min=-0.002401 max=0.002644 Jy/beam ! Clean residual mean=-0.000002 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.119193 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.119193 Jy ! Inverting map and beam ! Estimated beam: bmin=4.656 mas, bmaj=8.951 mas, bpa=14.78 degrees ! Estimated noise=647.455 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00381266 Jy ! Component: 100 - total flux cleaned = 0.00597814 Jy ! Component: 150 - total flux cleaned = 0.00732405 Jy ! Component: 200 - total flux cleaned = 0.00821395 Jy ! Total flux subtracted in 200 components = 0.00821395 Jy ! Clean residual min=-0.001838 max=0.001910 Jy/beam ! Clean residual mean=0.000001 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.127407 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 35 components and 0.127407 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.438 mas, bmaj=10.51 mas, bpa=8.934 degrees ! Estimated noise=715.346 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000774305 Jy ! Component: 100 - total flux cleaned = 0.00110001 Jy ! Component: 150 - total flux cleaned = 0.00116074 Jy ! Component: 200 - total flux cleaned = 0.00117025 Jy ! Total flux subtracted in 200 components = 0.00117025 Jy ! Clean residual min=-0.001914 max=0.002229 Jy/beam ! Clean residual mean=0.000003 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.128577 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.64833e-07 Jy ! Component: 100 - total flux cleaned = 9.16197e-06 Jy ! Component: 150 - total flux cleaned = 1.7777e-05 Jy ! Component: 200 - total flux cleaned = 2.60987e-05 Jy ! Total flux subtracted in 200 components = 2.60987e-05 Jy ! Clean residual min=-0.001910 max=0.002225 Jy/beam ! Clean residual mean=0.000003 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.128603 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 0.128603 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.656 mas, bmaj=8.951 mas, bpa=14.78 degrees ! Estimated noise=647.455 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.1539e-05 Jy ! Component: 100 - total flux cleaned = -0.000124107 Jy ! Component: 150 - total flux cleaned = -0.000109763 Jy ! Component: 200 - total flux cleaned = -9.5893e-05 Jy ! Total flux subtracted in 200 components = -9.5893e-05 Jy ! Clean residual min=-0.001802 max=0.001910 Jy/beam ! Clean residual mean=0.000003 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.128507 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.128507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077157Jy sigma=0.000768 ! Fit after self-cal, rms=0.077158Jy sigma=0.000768 wmodel J0713+1935_S_2014_08_05_pus_map.mod ! Writing 56 model components to file: J0713+1935_S_2014_08_05_pus_map.mod wobs J0713+1935_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0713+1935_S_2014_08_05_pus_uvs.fits wwins J0713+1935_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J0713+1935_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000435768 Jy ! Component: 100 - total flux cleaned = 0.000771395 Jy ! Component: 150 - total flux cleaned = 0.000974779 Jy ! Component: 200 - total flux cleaned = 0.00108568 Jy ! Component: 250 - total flux cleaned = 0.00121869 Jy ! Component: 300 - total flux cleaned = 0.00132171 Jy ! Component: 350 - total flux cleaned = 0.00137211 Jy ! Component: 400 - total flux cleaned = 0.0014453 Jy ! Component: 450 - total flux cleaned = 0.00146853 Jy ! Component: 500 - total flux cleaned = 0.00142154 Jy ! Component: 550 - total flux cleaned = 0.00142123 Jy ! Component: 600 - total flux cleaned = 0.00137608 Jy ! Component: 650 - total flux cleaned = 0.00128749 Jy ! Component: 700 - total flux cleaned = 0.0012442 Jy ! Component: 750 - total flux cleaned = 0.00122292 Jy ! Component: 800 - total flux cleaned = 0.00118085 Jy ! Component: 850 - total flux cleaned = 0.0011806 Jy ! Component: 900 - total flux cleaned = 0.00116056 Jy ! Component: 950 - total flux cleaned = 0.00114068 Jy ! Component: 1000 - total flux cleaned = 0.00116015 Jy ! Component: 1050 - total flux cleaned = 0.00108266 Jy ! Component: 1100 - total flux cleaned = 0.00106383 Jy ! Component: 1150 - total flux cleaned = 0.00110176 Jy ! Component: 1200 - total flux cleaned = 0.0011202 Jy ! Component: 1250 - total flux cleaned = 0.00108372 Jy ! Component: 1300 - total flux cleaned = 0.0011016 Jy ! Component: 1350 - total flux cleaned = 0.00108395 Jy ! Component: 1400 - total flux cleaned = 0.00108388 Jy ! Component: 1450 - total flux cleaned = 0.00106647 Jy ! Component: 1500 - total flux cleaned = 0.0010665 Jy ! Component: 1550 - total flux cleaned = 0.00101582 Jy ! Component: 1600 - total flux cleaned = 0.000998922 Jy ! Component: 1650 - total flux cleaned = 0.000965554 Jy ! Component: 1700 - total flux cleaned = 0.000981652 Jy ! Component: 1750 - total flux cleaned = 0.000949458 Jy ! Component: 1800 - total flux cleaned = 0.000933728 Jy ! Component: 1850 - total flux cleaned = 0.000902178 Jy ! Component: 1900 - total flux cleaned = 0.000839984 Jy ! Component: 1950 - total flux cleaned = 0.000886222 Jy ! Component: 2000 - total flux cleaned = 0.000870956 Jy ! Component: 2050 - total flux cleaned = 0.000841047 Jy ! Component: 2100 - total flux cleaned = 0.000856173 Jy ! Component: 2150 - total flux cleaned = 0.000841307 Jy ! Component: 2200 - total flux cleaned = 0.000826794 Jy ! Component: 2250 - total flux cleaned = 0.000812327 Jy ! Component: 2300 - total flux cleaned = 0.000841023 Jy ! Component: 2350 - total flux cleaned = 0.000783986 Jy ! Component: 2400 - total flux cleaned = 0.000868375 Jy ! Component: 2450 - total flux cleaned = 0.0007706 Jy ! Component: 2500 - total flux cleaned = 0.00078447 Jy ! Component: 2550 - total flux cleaned = 0.000784512 Jy ! Component: 2600 - total flux cleaned = 0.000743708 Jy ! Component: 2650 - total flux cleaned = 0.000757236 Jy ! Component: 2700 - total flux cleaned = 0.000757344 Jy ! Component: 2750 - total flux cleaned = 0.000744063 Jy ! Component: 2800 - total flux cleaned = 0.000730977 Jy ! Component: 2850 - total flux cleaned = 0.00069192 Jy ! Component: 2900 - total flux cleaned = 0.00073081 Jy ! Component: 2950 - total flux cleaned = 0.000717818 Jy ! Component: 3000 - total flux cleaned = 0.00070513 Jy ! Component: 3050 - total flux cleaned = 0.000680013 Jy ! Component: 3100 - total flux cleaned = 0.00069254 Jy ! Component: 3150 - total flux cleaned = 0.000704962 Jy ! Component: 3200 - total flux cleaned = 0.000717176 Jy ! Component: 3250 - total flux cleaned = 0.000668182 Jy ! Component: 3300 - total flux cleaned = 0.00066822 Jy ! Component: 3350 - total flux cleaned = 0.000704387 Jy ! Component: 3400 - total flux cleaned = 0.000656501 Jy ! Component: 3450 - total flux cleaned = 0.000644575 Jy ! Component: 3500 - total flux cleaned = 0.000620938 Jy ! Component: 3550 - total flux cleaned = 0.000585832 Jy ! Component: 3600 - total flux cleaned = 0.000620784 Jy ! Component: 3650 - total flux cleaned = 0.000585904 Jy ! Component: 3700 - total flux cleaned = 0.00058581 Jy ! Component: 3750 - total flux cleaned = 0.000597312 Jy ! Component: 3800 - total flux cleaned = 0.000653985 Jy ! Component: 3850 - total flux cleaned = 0.000665181 Jy ! Component: 3900 - total flux cleaned = 0.000698727 Jy ! Component: 3950 - total flux cleaned = 0.000698636 Jy ! Component: 4000 - total flux cleaned = 0.000665475 Jy ! Component: 4050 - total flux cleaned = 0.000676516 Jy ! Total flux subtracted in 4096 components = 0.000698313 Jy ! Clean residual min=-0.000864 max=0.000673 Jy/beam ! Clean residual mean=0.000002 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.129206 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 344 components and 0.129206 Jy ![Exited script file: muppet] wmap "J0713+1935_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.656 x 8.951 at 14.78 degrees (North through East) ! Clean map min=-0.0013396 max=0.113 Jy/beam ! Writing clean map to FITS file: J0713+1935_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113005 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000208425 device "J0713+1935_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0713+1935_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.553316 0.553316 1.10663 2.21326 4.42652 8.85305 17.7061 35.4122 70.8244 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.656 x 8.951 at 14.78 degrees (North through East) ! Clean map min=-0.0013396 max=0.113 Jy/beam quit ! Quitting program ! Log file J0713+1935_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:18:44 2016