! Started logfile: J0631+2020_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:17:29 2016 obs J0631+2020_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0631+2020_S_2014_08_05_pus_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.735249 visibilities/baseline/integration-bin. ! Found source: J0631+2020 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 7676 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0631+2020_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.870162Jy sigma=0.009563 ! Fit after self-cal, rms=0.853990Jy sigma=0.009377 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.943 mas, bmaj=8.025 mas, bpa=26.75 degrees ! Estimated noise=886.128 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113901 Jy ! Component: 100 - total flux cleaned = 0.138788 Jy ! Total flux subtracted in 100 components = 0.138788 Jy ! Clean residual min=-0.004571 max=0.007243 Jy/beam ! Clean residual mean=-0.000035 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 0.138788 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.138788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081425Jy sigma=0.000804 ! Fit after self-cal, rms=0.081420Jy sigma=0.000804 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.866 mas, bmaj=8.736 mas, bpa=23.84 degrees ! Estimated noise=751.623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110313 Jy ! Component: 100 - total flux cleaned = 0.0174903 Jy ! Component: 150 - total flux cleaned = 0.021754 Jy ! Component: 200 - total flux cleaned = 0.0246511 Jy ! Total flux subtracted in 200 components = 0.0246511 Jy ! Clean residual min=-0.003036 max=0.003564 Jy/beam ! Clean residual mean=-0.000004 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.163439 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 60 components and 0.163439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079624Jy sigma=0.000786 ! Fit after self-cal, rms=0.079609Jy sigma=0.000786 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.88 HN 0.95 KP 1.07 ! LA 1.11 MK 1.00* NL 0.97 OV 0.99 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.07 HN 1.02 KP 1.03 ! LA 1.10 MK 1.00* NL 0.99 OV 1.01 ! PT 1.01 SC 1.09 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.13 HN 1.01 KP 0.89 ! LA 0.83 MK 1.00* NL 1.02 OV 0.94 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 0.97 KP 0.88 ! LA 0.77 MK 1.00* NL 1.08 OV 1.01 ! PT 1.02 SC 1.04 ! ! ! Fit before self-cal, rms=0.079609Jy sigma=0.000786 ! Fit after self-cal, rms=0.076140Jy sigma=0.000766 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.926 mas, bmaj=8.734 mas, bpa=23.31 degrees ! Estimated noise=745.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633085 Jy ! Component: 100 - total flux cleaned = 0.000630158 Jy ! Component: 150 - total flux cleaned = 0.00070074 Jy ! Component: 200 - total flux cleaned = 0.000759954 Jy ! Total flux subtracted in 200 components = 0.000759954 Jy ! Clean residual min=-0.002468 max=0.002477 Jy/beam ! Clean residual mean=-0.000003 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.164199 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.164199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076093Jy sigma=0.000766 ! Fit after self-cal, rms=0.076096Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076096Jy sigma=0.000766 ! Fit after self-cal, rms=0.077615Jy sigma=0.000763 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.901 mas, bmaj=8.723 mas, bpa=23.48 degrees ! Estimated noise=745.548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221955 Jy ! Component: 100 - total flux cleaned = 8.73756e-05 Jy ! Component: 150 - total flux cleaned = 2.96662e-05 Jy ! Component: 200 - total flux cleaned = -2.36868e-05 Jy ! Total flux subtracted in 200 components = -2.36868e-05 Jy ! Clean residual min=-0.002496 max=0.002192 Jy/beam ! Clean residual mean=-0.000000 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.164175 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 77 components and 0.164175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077602Jy sigma=0.000763 ! Fit after self-cal, rms=0.077630Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.77796e-05 Jy ! Component: 100 - total flux cleaned = -0.000119594 Jy ! Component: 150 - total flux cleaned = -0.000146585 Jy ! Component: 200 - total flux cleaned = -0.000146816 Jy ! Total flux subtracted in 200 components = -0.000146816 Jy ! Clean residual min=-0.002490 max=0.002163 Jy/beam ! Clean residual mean=-0.000001 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.164028 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 80 components and 0.164028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077625Jy sigma=0.000763 ! Fit after self-cal, rms=0.077622Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077622Jy sigma=0.000763 ! Fit after self-cal, rms=0.077776Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.9 mas, bmaj=8.719 mas, bpa=23.53 degrees ! Estimated noise=745.695 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.86095e-05 Jy ! Component: 100 - total flux cleaned = -9.96257e-05 Jy ! Component: 150 - total flux cleaned = -0.000122657 Jy ! Component: 200 - total flux cleaned = -0.000133413 Jy ! Total flux subtracted in 200 components = -0.000133413 Jy ! Clean residual min=-0.002492 max=0.002153 Jy/beam ! Clean residual mean=-0.000001 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.163895 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 83 components and 0.163895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077771Jy sigma=0.000763 ! Fit after self-cal, rms=0.077771Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.26375e-05 Jy ! Component: 100 - total flux cleaned = -2.24729e-05 Jy ! Component: 150 - total flux cleaned = -2.24282e-05 Jy ! Component: 200 - total flux cleaned = -3.17327e-05 Jy ! Total flux subtracted in 200 components = -3.17327e-05 Jy ! Clean residual min=-0.002492 max=0.002146 Jy/beam ! Clean residual mean=-0.000001 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.163863 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 86 components and 0.163863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077769Jy sigma=0.000763 ! Fit after self-cal, rms=0.077768Jy sigma=0.000763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077768Jy sigma=0.000763 ! Fit after self-cal, rms=0.077850Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.675 mas, bmaj=10.34 mas, bpa=10.46 degrees ! Estimated noise=828.088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.06405e-05 Jy ! Component: 100 - total flux cleaned = -0.000141784 Jy ! Component: 150 - total flux cleaned = -0.000163105 Jy ! Component: 200 - total flux cleaned = -0.000172844 Jy ! Total flux subtracted in 200 components = -0.000172844 Jy ! Clean residual min=-0.002680 max=0.002450 Jy/beam ! Clean residual mean=-0.000002 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.16369 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 99 components and 0.16369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077848Jy sigma=0.000763 ! Fit after self-cal, rms=0.077846Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.71309e-05 Jy ! Component: 100 - total flux cleaned = -4.66631e-05 Jy ! Component: 150 - total flux cleaned = -5.49774e-05 Jy ! Component: 200 - total flux cleaned = -6.24722e-05 Jy ! Total flux subtracted in 200 components = -6.24722e-05 Jy ! Clean residual min=-0.002676 max=0.002461 Jy/beam ! Clean residual mean=-0.000003 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.163628 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 102 components and 0.163628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077846Jy sigma=0.000763 ! Fit after self-cal, rms=0.077845Jy sigma=0.000763 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.899 mas, bmaj=8.718 mas, bpa=23.59 degrees ! Estimated noise=745.915 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.899 x 8.718 at 23.59 degrees (North through East) ! Clean map min=-0.0024796 max=0.1459 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.964 mas, bmaj=7.983 mas, bpa=26.5 degrees ! Estimated noise=879.358 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112937 Jy ! Component: 100 - total flux cleaned = 0.137687 Jy ! Component: 150 - total flux cleaned = 0.146263 Jy ! Component: 200 - total flux cleaned = 0.151401 Jy ! Total flux subtracted in 200 components = 0.151401 Jy ! Clean residual min=-0.003142 max=0.003211 Jy/beam ! Clean residual mean=-0.000014 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.151401 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.151401 Jy ! Inverting map and beam ! Estimated beam: bmin=4.899 mas, bmaj=8.718 mas, bpa=23.59 degrees ! Estimated noise=745.915 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00458025 Jy ! Component: 100 - total flux cleaned = 0.00731061 Jy ! Component: 150 - total flux cleaned = 0.00907433 Jy ! Component: 200 - total flux cleaned = 0.010258 Jy ! Total flux subtracted in 200 components = 0.010258 Jy ! Clean residual min=-0.002558 max=0.002294 Jy/beam ! Clean residual mean=-0.000005 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.161659 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 65 components and 0.161659 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.675 mas, bmaj=10.34 mas, bpa=10.46 degrees ! Estimated noise=828.088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121265 Jy ! Component: 100 - total flux cleaned = 0.00138119 Jy ! Component: 150 - total flux cleaned = 0.00150962 Jy ! Component: 200 - total flux cleaned = 0.00157999 Jy ! Total flux subtracted in 200 components = 0.00157999 Jy ! Clean residual min=-0.002692 max=0.002512 Jy/beam ! Clean residual mean=-0.000004 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.163239 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.04669e-05 Jy ! Component: 100 - total flux cleaned = 4.46159e-05 Jy ! Component: 150 - total flux cleaned = 5.80369e-05 Jy ! Component: 200 - total flux cleaned = 7.0401e-05 Jy ! Total flux subtracted in 200 components = 7.0401e-05 Jy ! Clean residual min=-0.002678 max=0.002507 Jy/beam ! Clean residual mean=-0.000003 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.16331 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 0.16331 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.899 mas, bmaj=8.718 mas, bpa=23.59 degrees ! Estimated noise=745.915 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.47492e-05 Jy ! Component: 100 - total flux cleaned = -3.49777e-05 Jy ! Component: 150 - total flux cleaned = -1.60033e-05 Jy ! Component: 200 - total flux cleaned = 1.84599e-05 Jy ! Total flux subtracted in 200 components = 1.84599e-05 Jy ! Clean residual min=-0.002471 max=0.002116 Jy/beam ! Clean residual mean=-0.000002 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.163328 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 87 components and 0.163328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077856Jy sigma=0.000763 ! Fit after self-cal, rms=0.077852Jy sigma=0.000763 wmodel J0631+2020_S_2014_08_05_pus_map.mod ! Writing 87 model components to file: J0631+2020_S_2014_08_05_pus_map.mod wobs J0631+2020_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0631+2020_S_2014_08_05_pus_uvs.fits wwins J0631+2020_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J0631+2020_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000707119 Jy ! Component: 100 - total flux cleaned = -0.000747371 Jy ! Component: 150 - total flux cleaned = -0.00056591 Jy ! Component: 200 - total flux cleaned = -0.000324086 Jy ! Component: 250 - total flux cleaned = -0.000224882 Jy ! Component: 300 - total flux cleaned = -0.000160519 Jy ! Component: 350 - total flux cleaned = -9.89004e-05 Jy ! Component: 400 - total flux cleaned = 2.00083e-05 Jy ! Component: 450 - total flux cleaned = 4.88505e-05 Jy ! Component: 500 - total flux cleaned = 2.14012e-05 Jy ! Component: 550 - total flux cleaned = 7.5945e-05 Jy ! Component: 600 - total flux cleaned = 7.53268e-05 Jy ! Component: 650 - total flux cleaned = -2.2517e-06 Jy ! Component: 700 - total flux cleaned = -5.16718e-05 Jy ! Component: 750 - total flux cleaned = -0.00012487 Jy ! Component: 800 - total flux cleaned = -0.000172785 Jy ! Component: 850 - total flux cleaned = -0.000313317 Jy ! Component: 900 - total flux cleaned = -0.000404427 Jy ! Component: 950 - total flux cleaned = -0.000560507 Jy ! Component: 1000 - total flux cleaned = -0.000691647 Jy ! Component: 1050 - total flux cleaned = -0.000884123 Jy ! Component: 1100 - total flux cleaned = -0.00103081 Jy ! Component: 1150 - total flux cleaned = -0.00121632 Jy ! Component: 1200 - total flux cleaned = -0.001378 Jy ! Component: 1250 - total flux cleaned = -0.00153725 Jy ! Component: 1300 - total flux cleaned = -0.00169358 Jy ! Component: 1350 - total flux cleaned = -0.00180912 Jy ! Component: 1400 - total flux cleaned = -0.00194157 Jy ! Component: 1450 - total flux cleaned = -0.002072 Jy ! Component: 1500 - total flux cleaned = -0.00220019 Jy ! Component: 1550 - total flux cleaned = -0.00227229 Jy ! Component: 1600 - total flux cleaned = -0.00239688 Jy ! Component: 1650 - total flux cleaned = -0.00250188 Jy ! Component: 1700 - total flux cleaned = -0.00258791 Jy ! Component: 1750 - total flux cleaned = -0.00270677 Jy ! Component: 1800 - total flux cleaned = -0.00282407 Jy ! Component: 1850 - total flux cleaned = -0.00293969 Jy ! Component: 1900 - total flux cleaned = -0.00298882 Jy ! Component: 1950 - total flux cleaned = -0.00305322 Jy ! Component: 2000 - total flux cleaned = -0.00314927 Jy ! Component: 2050 - total flux cleaned = -0.00324403 Jy ! Component: 2100 - total flux cleaned = -0.0032755 Jy ! Component: 2150 - total flux cleaned = -0.00341441 Jy ! Component: 2200 - total flux cleaned = -0.0034907 Jy ! Component: 2250 - total flux cleaned = -0.00356644 Jy ! Component: 2300 - total flux cleaned = -0.00365606 Jy ! Component: 2350 - total flux cleaned = -0.00375952 Jy ! Component: 2400 - total flux cleaned = -0.00381797 Jy ! Component: 2450 - total flux cleaned = -0.00391894 Jy ! Component: 2500 - total flux cleaned = -0.00399042 Jy ! Component: 2550 - total flux cleaned = -0.0040893 Jy ! Component: 2600 - total flux cleaned = -0.00414532 Jy ! Component: 2650 - total flux cleaned = -0.00417267 Jy ! Component: 2700 - total flux cleaned = -0.00419985 Jy ! Component: 2750 - total flux cleaned = -0.0042539 Jy ! Component: 2800 - total flux cleaned = -0.00430758 Jy ! Component: 2850 - total flux cleaned = -0.00433404 Jy ! Component: 2900 - total flux cleaned = -0.00433421 Jy ! Component: 2950 - total flux cleaned = -0.00436018 Jy ! Component: 3000 - total flux cleaned = -0.00438615 Jy ! Component: 3050 - total flux cleaned = -0.00441196 Jy ! Component: 3100 - total flux cleaned = -0.00444997 Jy ! Component: 3150 - total flux cleaned = -0.00446252 Jy ! Component: 3200 - total flux cleaned = -0.00448749 Jy ! Component: 3250 - total flux cleaned = -0.00452464 Jy ! Component: 3300 - total flux cleaned = -0.00453684 Jy ! Component: 3350 - total flux cleaned = -0.0045248 Jy ! Component: 3400 - total flux cleaned = -0.00459718 Jy ! Component: 3450 - total flux cleaned = -0.00457342 Jy ! Component: 3500 - total flux cleaned = -0.00463285 Jy ! Component: 3550 - total flux cleaned = -0.00463293 Jy ! Component: 3600 - total flux cleaned = -0.00467976 Jy ! Component: 3650 - total flux cleaned = -0.00471456 Jy ! Component: 3700 - total flux cleaned = -0.00476064 Jy ! Component: 3750 - total flux cleaned = -0.00478336 Jy ! Component: 3800 - total flux cleaned = -0.00478333 Jy ! Component: 3850 - total flux cleaned = -0.00483958 Jy ! Component: 3900 - total flux cleaned = -0.00483957 Jy ! Component: 3950 - total flux cleaned = -0.0048839 Jy ! Component: 4000 - total flux cleaned = -0.00487276 Jy ! Component: 4050 - total flux cleaned = -0.00496047 Jy ! Total flux subtracted in 4096 components = -0.00496043 Jy ! Clean residual min=-0.000785 max=0.000665 Jy/beam ! Clean residual mean=-0.000002 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.158368 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 395 components and 0.158368 Jy ![Exited script file: muppet] wmap "J0631+2020_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.899 x 8.718 at 23.59 degrees (North through East) ! Clean map min=-0.0014991 max=0.14581 Jy/beam ! Writing clean map to FITS file: J0631+2020_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.145812 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000209006 device "J0631+2020_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0631+2020_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.430018 0.430018 0.860037 1.72007 3.44015 6.88029 13.7606 27.5212 55.0424 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.145 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.899 x 8.718 at 23.59 degrees (North through East) ! Clean map min=-0.0014991 max=0.14581 Jy/beam quit ! Quitting program ! Log file J0631+2020_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:17:34 2016