! Started logfile: J0559+2353_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:17:24 2016 obs J0559+2353_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0559+2353_S_2014_08_05_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.768056 visibilities/baseline/integration-bin. ! Found source: J0559+2353 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 2212 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0559+2353_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.588173Jy sigma=0.007385 ! Fit after self-cal, rms=0.579136Jy sigma=0.007271 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=7.62 mas, bpa=22.07 degrees ! Estimated noise=1440.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.324396 Jy ! Component: 100 - total flux cleaned = 0.395151 Jy ! Total flux subtracted in 100 components = 0.395151 Jy ! Clean residual min=-0.013909 max=0.020260 Jy/beam ! Clean residual mean=0.000002 rms=0.003802 Jy/beam ! Combined flux in latest and established models = 0.395151 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.395151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092578Jy sigma=0.001039 ! Fit after self-cal, rms=0.092576Jy sigma=0.001039 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.889 mas, bmaj=8.268 mas, bpa=22.38 degrees ! Estimated noise=1224.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274952 Jy ! Component: 100 - total flux cleaned = 0.0406574 Jy ! Component: 150 - total flux cleaned = 0.0484444 Jy ! Component: 200 - total flux cleaned = 0.0534742 Jy ! Total flux subtracted in 200 components = 0.0534742 Jy ! Clean residual min=-0.011839 max=0.011269 Jy/beam ! Clean residual mean=0.000033 rms=0.002825 Jy/beam ! Combined flux in latest and established models = 0.448626 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 51 components and 0.448626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082846Jy sigma=0.000949 ! Fit after self-cal, rms=0.082823Jy sigma=0.000948 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.87 HN 0.96 KP 1.05 ! LA 1.08 MK 1.00* NL 1.01 OV 1.01 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.05 HN 1.03 KP 1.00 ! LA 1.05 MK 1.00* NL 1.04 OV 1.00 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.20 HN 1.03 KP 0.89 ! LA 0.84 MK 1.00* NL 1.01 OV 0.94 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.04 HN 1.02 KP 0.86 ! LA 0.79 MK 1.00* NL 1.09 OV 1.01 ! PT 1.03 SC 0.99 ! ! ! Fit before self-cal, rms=0.082823Jy sigma=0.000948 ! Fit after self-cal, rms=0.064991Jy sigma=0.000784 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.896 mas, bmaj=8.302 mas, bpa=22.3 degrees ! Estimated noise=1218.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-62, 107). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0079045 Jy ! Component: 100 - total flux cleaned = 0.0123141 Jy ! Component: 150 - total flux cleaned = 0.0140764 Jy ! Component: 200 - total flux cleaned = 0.0152953 Jy ! Total flux subtracted in 200 components = 0.0152953 Jy ! Clean residual min=-0.004104 max=0.003565 Jy/beam ! Clean residual mean=0.000012 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.463921 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 91 components and 0.463921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063995Jy sigma=0.000771 ! Fit after self-cal, rms=0.063971Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063971Jy sigma=0.000770 ! Fit after self-cal, rms=0.063728Jy sigma=0.000770 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.9 mas, bmaj=8.303 mas, bpa=22.24 degrees ! Estimated noise=1214.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110327 Jy ! Component: 100 - total flux cleaned = 0.00164542 Jy ! Component: 150 - total flux cleaned = 0.0020327 Jy ! Component: 200 - total flux cleaned = 0.00243869 Jy ! Total flux subtracted in 200 components = 0.00243869 Jy ! Clean residual min=-0.003776 max=0.003527 Jy/beam ! Clean residual mean=0.000008 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.46636 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 108 components and 0.466359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063612Jy sigma=0.000768 ! Fit after self-cal, rms=0.063604Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.95659e-06 Jy ! Component: 100 - total flux cleaned = 0.000407535 Jy ! Component: 150 - total flux cleaned = 0.000665873 Jy ! Component: 200 - total flux cleaned = 0.000929916 Jy ! Total flux subtracted in 200 components = 0.000929916 Jy ! Clean residual min=-0.003687 max=0.003522 Jy/beam ! Clean residual mean=0.000007 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.467289 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 120 components and 0.46729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063570Jy sigma=0.000768 ! Fit after self-cal, rms=0.063566Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063566Jy sigma=0.000768 ! Fit after self-cal, rms=0.063471Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.901 mas, bmaj=8.306 mas, bpa=22.24 degrees ! Estimated noise=1213.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000248336 Jy ! Component: 100 - total flux cleaned = 3.32124e-05 Jy ! Component: 150 - total flux cleaned = 0.000233878 Jy ! Component: 200 - total flux cleaned = 0.000394078 Jy ! Total flux subtracted in 200 components = 0.000394078 Jy ! Clean residual min=-0.003435 max=0.003404 Jy/beam ! Clean residual mean=0.000007 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.467684 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 129 components and 0.467684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063448Jy sigma=0.000767 ! Fit after self-cal, rms=0.063444Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.93653e-05 Jy ! Component: 100 - total flux cleaned = 0.000178913 Jy ! Component: 150 - total flux cleaned = 0.000277928 Jy ! Component: 200 - total flux cleaned = 0.000390218 Jy ! Total flux subtracted in 200 components = 0.000390218 Jy ! Clean residual min=-0.003359 max=0.003412 Jy/beam ! Clean residual mean=0.000006 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.468074 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 136 components and 0.468074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063431Jy sigma=0.000767 ! Fit after self-cal, rms=0.063430Jy sigma=0.000767 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063430Jy sigma=0.000767 ! Fit after self-cal, rms=0.063385Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.121 mas, bmaj=10.25 mas, bpa=6.763 degrees ! Estimated noise=1446.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.62494e-05 Jy ! Component: 100 - total flux cleaned = 0.000129395 Jy ! Component: 150 - total flux cleaned = 0.000174079 Jy ! Component: 200 - total flux cleaned = 0.00018806 Jy ! Total flux subtracted in 200 components = 0.00018806 Jy ! Clean residual min=-0.003918 max=0.003471 Jy/beam ! Clean residual mean=0.000010 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.468262 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 154 components and 0.468262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063379Jy sigma=0.000767 ! Fit after self-cal, rms=0.063377Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.14326e-05 Jy ! Component: 100 - total flux cleaned = 0.000109136 Jy ! Component: 150 - total flux cleaned = 0.00013576 Jy ! Component: 200 - total flux cleaned = 0.000160657 Jy ! Total flux subtracted in 200 components = 0.000160657 Jy ! Clean residual min=-0.003903 max=0.003477 Jy/beam ! Clean residual mean=0.000010 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.468423 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 156 components and 0.468423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063374Jy sigma=0.000767 ! Fit after self-cal, rms=0.063373Jy sigma=0.000767 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.901 mas, bmaj=8.308 mas, bpa=22.26 degrees ! Estimated noise=1213.2 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.901 x 8.308 at 22.26 degrees (North through East) ! Clean map min=-0.0032161 max=0.41705 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=7.642 mas, bpa=21.96 degrees ! Estimated noise=1438.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.323775 Jy ! Component: 100 - total flux cleaned = 0.394425 Jy ! Component: 150 - total flux cleaned = 0.415263 Jy ! Component: 200 - total flux cleaned = 0.425461 Jy ! Total flux subtracted in 200 components = 0.425461 Jy ! Clean residual min=-0.005912 max=0.006145 Jy/beam ! Clean residual mean=0.000018 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 0.425461 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.425461 Jy ! Inverting map and beam ! Estimated beam: bmin=3.901 mas, bmaj=8.308 mas, bpa=22.26 degrees ! Estimated noise=1213.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00882377 Jy ! Component: 100 - total flux cleaned = 0.0152429 Jy ! Component: 150 - total flux cleaned = 0.0202979 Jy ! Component: 200 - total flux cleaned = 0.0243902 Jy ! Total flux subtracted in 200 components = 0.0243902 Jy ! Clean residual min=-0.003890 max=0.003884 Jy/beam ! Clean residual mean=0.000016 rms=0.001129 Jy/beam ! Combined flux in latest and established models = 0.449852 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 75 components and 0.449852 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.121 mas, bmaj=10.25 mas, bpa=6.763 degrees ! Estimated noise=1446.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052322 Jy ! Component: 100 - total flux cleaned = 0.00882193 Jy ! Component: 150 - total flux cleaned = 0.0114779 Jy ! Component: 200 - total flux cleaned = 0.0133609 Jy ! Total flux subtracted in 200 components = 0.0133609 Jy ! Clean residual min=-0.004056 max=0.003351 Jy/beam ! Clean residual mean=0.000016 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.463212 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000921476 Jy ! Component: 100 - total flux cleaned = 0.00164316 Jy ! Component: 150 - total flux cleaned = 0.00229975 Jy ! Component: 200 - total flux cleaned = 0.00281611 Jy ! Total flux subtracted in 200 components = 0.00281611 Jy ! Clean residual min=-0.003878 max=0.003333 Jy/beam ! Clean residual mean=0.000014 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.466029 Jy ! Adding 93 model components to the UV plane model. ! The established model now contains 158 components and 0.466029 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.901 mas, bmaj=8.308 mas, bpa=22.26 degrees ! Estimated noise=1213.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000467773 Jy ! Component: 100 - total flux cleaned = 0.00102175 Jy ! Component: 150 - total flux cleaned = 0.00146812 Jy ! Component: 200 - total flux cleaned = 0.00177074 Jy ! Total flux subtracted in 200 components = 0.00177074 Jy ! Clean residual min=-0.003360 max=0.003329 Jy/beam ! Clean residual mean=0.000006 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.467799 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 177 components and 0.467799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063397Jy sigma=0.000767 ! Fit after self-cal, rms=0.063388Jy sigma=0.000767 wmodel J0559+2353_S_2014_08_05_pus_map.mod ! Writing 177 model components to file: J0559+2353_S_2014_08_05_pus_map.mod wobs J0559+2353_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0559+2353_S_2014_08_05_pus_uvs.fits wwins J0559+2353_S_2014_08_05_pus_map.win ! wwins: Wrote 2 windows to J0559+2353_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.82901e-05 Jy ! Component: 100 - total flux cleaned = 5.07235e-05 Jy ! Component: 150 - total flux cleaned = 0.000484347 Jy ! Component: 200 - total flux cleaned = 0.000844378 Jy ! Component: 250 - total flux cleaned = 0.000930091 Jy ! Component: 300 - total flux cleaned = 0.00105321 Jy ! Component: 350 - total flux cleaned = 0.00120968 Jy ! Component: 400 - total flux cleaned = 0.00135858 Jy ! Component: 450 - total flux cleaned = 0.00153794 Jy ! Component: 500 - total flux cleaned = 0.00167576 Jy ! Component: 550 - total flux cleaned = 0.00170896 Jy ! Component: 600 - total flux cleaned = 0.00174103 Jy ! Component: 650 - total flux cleaned = 0.00167852 Jy ! Component: 700 - total flux cleaned = 0.00167775 Jy ! Component: 750 - total flux cleaned = 0.00158943 Jy ! Component: 800 - total flux cleaned = 0.00156047 Jy ! Component: 850 - total flux cleaned = 0.00142161 Jy ! Component: 900 - total flux cleaned = 0.00136767 Jy ! Component: 950 - total flux cleaned = 0.00126237 Jy ! Component: 1000 - total flux cleaned = 0.00121152 Jy ! Component: 1050 - total flux cleaned = 0.00123667 Jy ! Component: 1100 - total flux cleaned = 0.00116256 Jy ! Component: 1150 - total flux cleaned = 0.00113869 Jy ! Component: 1200 - total flux cleaned = 0.00109175 Jy ! Component: 1250 - total flux cleaned = 0.00111481 Jy ! Component: 1300 - total flux cleaned = 0.00102427 Jy ! Component: 1350 - total flux cleaned = 0.00109083 Jy ! Component: 1400 - total flux cleaned = 0.00109107 Jy ! Component: 1450 - total flux cleaned = 0.00109174 Jy ! Component: 1500 - total flux cleaned = 0.00104986 Jy ! Component: 1550 - total flux cleaned = 0.00100873 Jy ! Component: 1600 - total flux cleaned = 0.00100862 Jy ! Component: 1650 - total flux cleaned = 0.00106794 Jy ! Component: 1700 - total flux cleaned = 0.00104767 Jy ! Component: 1750 - total flux cleaned = 0.00108655 Jy ! Component: 1800 - total flux cleaned = 0.00102956 Jy ! Component: 1850 - total flux cleaned = 0.00112332 Jy ! Component: 1900 - total flux cleaned = 0.00116024 Jy ! Component: 1950 - total flux cleaned = 0.00119629 Jy ! Component: 2000 - total flux cleaned = 0.00119586 Jy ! Component: 2050 - total flux cleaned = 0.00121354 Jy ! Component: 2100 - total flux cleaned = 0.00121348 Jy ! Component: 2150 - total flux cleaned = 0.00128241 Jy ! Component: 2200 - total flux cleaned = 0.0012993 Jy ! Component: 2250 - total flux cleaned = 0.00136635 Jy ! Component: 2300 - total flux cleaned = 0.00139967 Jy ! Component: 2350 - total flux cleaned = 0.00141602 Jy ! Component: 2400 - total flux cleaned = 0.00144876 Jy ! Component: 2450 - total flux cleaned = 0.00146475 Jy ! Component: 2500 - total flux cleaned = 0.00144897 Jy ! Component: 2550 - total flux cleaned = 0.00152767 Jy ! Component: 2600 - total flux cleaned = 0.00157449 Jy ! Component: 2650 - total flux cleaned = 0.00160511 Jy ! Component: 2700 - total flux cleaned = 0.00159003 Jy ! Component: 2750 - total flux cleaned = 0.00160529 Jy ! Component: 2800 - total flux cleaned = 0.00168013 Jy ! Component: 2850 - total flux cleaned = 0.00168034 Jy ! Component: 2900 - total flux cleaned = 0.00175383 Jy ! Component: 2950 - total flux cleaned = 0.00176853 Jy ! Component: 3000 - total flux cleaned = 0.00182625 Jy ! Component: 3050 - total flux cleaned = 0.00188333 Jy ! Component: 3100 - total flux cleaned = 0.00186925 Jy ! Component: 3150 - total flux cleaned = 0.00193936 Jy ! Component: 3200 - total flux cleaned = 0.0019533 Jy ! Component: 3250 - total flux cleaned = 0.0020086 Jy ! Component: 3300 - total flux cleaned = 0.00204965 Jy ! Component: 3350 - total flux cleaned = 0.0020225 Jy ! Component: 3400 - total flux cleaned = 0.00206294 Jy ! Component: 3450 - total flux cleaned = 0.0020899 Jy ! Component: 3500 - total flux cleaned = 0.00214336 Jy ! Component: 3550 - total flux cleaned = 0.00216994 Jy ! Component: 3600 - total flux cleaned = 0.00218307 Jy ! Component: 3650 - total flux cleaned = 0.00220917 Jy ! Component: 3700 - total flux cleaned = 0.00219622 Jy ! Component: 3750 - total flux cleaned = 0.00223496 Jy ! Component: 3800 - total flux cleaned = 0.00223488 Jy ! Component: 3850 - total flux cleaned = 0.00223487 Jy ! Component: 3900 - total flux cleaned = 0.00222216 Jy ! Component: 3950 - total flux cleaned = 0.00222212 Jy ! Component: 4000 - total flux cleaned = 0.00223464 Jy ! Component: 4050 - total flux cleaned = 0.00224714 Jy ! Total flux subtracted in 4096 components = 0.0022595 Jy ! Clean residual min=-0.000750 max=0.000715 Jy/beam ! Clean residual mean=0.000003 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.470059 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 469 components and 0.470059 Jy ![Exited script file: muppet] wmap "J0559+2353_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.901 x 8.308 at 22.26 degrees (North through East) ! Clean map min=-0.0023212 max=0.41743 Jy/beam ! Writing clean map to FITS file: J0559+2353_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.417433 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000211734 device "J0559+2353_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0559+2353_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.152169 0.152169 0.304337 0.608674 1.21735 2.4347 4.86939 9.73879 19.4776 38.9552 77.9103 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.417 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.901 x 8.308 at 22.26 degrees (North through East) ! Clean map min=-0.0023212 max=0.41743 Jy/beam quit ! Quitting program ! Log file J0559+2353_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:17:29 2016