! Started logfile: J0539-2839_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:17:18 2016
obs J0539-2839_S_2014_08_05_pus_uva.fits
! Reading UV FITS file: J0539-2839_S_2014_08_05_pus_uva.fits
! AN table 1: 16 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.758333 visibilities/baseline/integration-bin.
! Found source: J0539-2839
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 360 lines of history.
! 
! Reading 2184 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0539-2839_S_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.337542Jy  sigma=0.002171
! Fit after  self-cal, rms=0.319030Jy  sigma=0.001977
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.07 mas, bmaj=19.15 mas, bpa=26.91 degrees
! Estimated noise=2940.73 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.68624 Jy
! Component: 100  -  total flux cleaned = 0.87896 Jy
! Total flux subtracted in 100 components = 0.87896 Jy
! Clean residual min=-0.046780 max=0.090115 Jy/beam
! Clean residual mean=-0.000741 rms=0.017591 Jy/beam
! Combined flux in latest and established models = 0.87896 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.87896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.266117Jy  sigma=0.001979
! Fit after  self-cal, rms=0.265977Jy  sigma=0.001978
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.916 mas, bmaj=20.29 mas, bpa=25.49 degrees
! Estimated noise=1914.15 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.12291 Jy
! Component: 100  -  total flux cleaned = 0.189883 Jy
! Component: 150  -  total flux cleaned = 0.227921 Jy
! Component: 200  -  total flux cleaned = 0.249567 Jy
! Total flux subtracted in 200 components = 0.249567 Jy
! Clean residual min=-0.035834 max=0.046651 Jy/beam
! Clean residual mean=-0.000311 rms=0.010819 Jy/beam
! Combined flux in latest and established models = 1.12853 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 77 components and 1.12853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.207506Jy  sigma=0.001392
! Fit after  self-cal, rms=0.207398Jy  sigma=0.001391
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.90     HN        1.43     KP        1.05     
!   LA        1.10     MK        1.00*    NL        0.93     OV        0.96     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        1.53     KP        1.01     
!   LA        1.06     MK        1.00*    NL        0.96     OV        0.98     
!   PT        1.01     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.22     HN        1.52     KP        0.89     
!   LA        0.84     MK        1.00*    NL        0.96     OV        0.91     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.06     HN        1.50     KP        0.86     
!   LA        0.78     MK        1.00*    NL        1.01     OV        0.96     
!   PT        1.02     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.207398Jy  sigma=0.001391
! Fit after  self-cal, rms=0.156360Jy  sigma=0.000890
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.966 mas, bmaj=21.24 mas, bpa=25.96 degrees
! Estimated noise=1947.38 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0248653 Jy
! Component: 100  -  total flux cleaned = -0.0285947 Jy
! Component: 150  -  total flux cleaned = -0.0304988 Jy
! Component: 200  -  total flux cleaned = -0.0312624 Jy
! Total flux subtracted in 200 components = -0.0312624 Jy
! Clean residual min=-0.019863 max=0.014724 Jy/beam
! Clean residual mean=-0.000160 rms=0.004823 Jy/beam
! Combined flux in latest and established models = 1.09726 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 93 components and 1.09726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150911Jy  sigma=0.000841
! Fit after  self-cal, rms=0.150985Jy  sigma=0.000841
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150985Jy  sigma=0.000841
! Fit after  self-cal, rms=0.153245Jy  sigma=0.000831
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.975 mas, bmaj=21.46 mas, bpa=26.03 degrees
! Estimated noise=1947.83 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0135718 Jy
! Component: 100  -  total flux cleaned = -0.0158788 Jy
! Component: 150  -  total flux cleaned = -0.0177958 Jy
! Component: 200  -  total flux cleaned = -0.0188764 Jy
! Total flux subtracted in 200 components = -0.0188764 Jy
! Clean residual min=-0.017249 max=0.012647 Jy/beam
! Clean residual mean=-0.000142 rms=0.004015 Jy/beam
! Combined flux in latest and established models = 1.07839 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 112 components and 1.07839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150735Jy  sigma=0.000815
! Fit after  self-cal, rms=0.150753Jy  sigma=0.000814
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.22348e-05 Jy
! Component: 100  -  total flux cleaned = 0.000348108 Jy
! Component: 150  -  total flux cleaned = 0.000933743 Jy
! Component: 200  -  total flux cleaned = 0.00148563 Jy
! Total flux subtracted in 200 components = 0.00148563 Jy
! Clean residual min=-0.016641 max=0.012349 Jy/beam
! Clean residual mean=-0.000136 rms=0.003927 Jy/beam
! Combined flux in latest and established models = 1.07987 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 121 components and 1.07987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149903Jy  sigma=0.000811
! Fit after  self-cal, rms=0.149898Jy  sigma=0.000811
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149898Jy  sigma=0.000811
! Fit after  self-cal, rms=0.152360Jy  sigma=0.000805
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.982 mas, bmaj=21.64 mas, bpa=26.09 degrees
! Estimated noise=1949.06 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00890411 Jy
! Component: 100  -  total flux cleaned = -0.0108296 Jy
! Component: 150  -  total flux cleaned = -0.0124448 Jy
! Component: 200  -  total flux cleaned = -0.0132605 Jy
! Total flux subtracted in 200 components = -0.0132605 Jy
! Clean residual min=-0.014682 max=0.011240 Jy/beam
! Clean residual mean=-0.000122 rms=0.003436 Jy/beam
! Combined flux in latest and established models = 1.06661 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 131 components and 1.06661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150918Jy  sigma=0.000798
! Fit after  self-cal, rms=0.150945Jy  sigma=0.000798
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.84946e-05 Jy
! Component: 100  -  total flux cleaned = 0.000262775 Jy
! Component: 150  -  total flux cleaned = 0.000583252 Jy
! Component: 200  -  total flux cleaned = 0.000886726 Jy
! Total flux subtracted in 200 components = 0.000886726 Jy
! Clean residual min=-0.014281 max=0.010845 Jy/beam
! Clean residual mean=-0.000120 rms=0.003391 Jy/beam
! Combined flux in latest and established models = 1.0675 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 140 components and 1.0675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150290Jy  sigma=0.000796
! Fit after  self-cal, rms=0.150288Jy  sigma=0.000796
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150288Jy  sigma=0.000796
! Fit after  self-cal, rms=0.152288Jy  sigma=0.000793
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.478 mas, bmaj=29.17 mas, bpa=16.01 degrees
! Estimated noise=2050.87 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00614056 Jy
! Component: 100  -  total flux cleaned = -0.00629989 Jy
! Component: 150  -  total flux cleaned = -0.00630266 Jy
! Component: 200  -  total flux cleaned = -0.00621183 Jy
! Total flux subtracted in 200 components = -0.00621183 Jy
! Clean residual min=-0.013279 max=0.011373 Jy/beam
! Clean residual mean=-0.000142 rms=0.003533 Jy/beam
! Combined flux in latest and established models = 1.06129 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 161 components and 1.06129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151607Jy  sigma=0.000790
! Fit after  self-cal, rms=0.151629Jy  sigma=0.000790
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.08395e-05 Jy
! Component: 100  -  total flux cleaned = -7.42801e-05 Jy
! Component: 150  -  total flux cleaned = 3.71518e-07 Jy
! Component: 200  -  total flux cleaned = 7.19961e-05 Jy
! Total flux subtracted in 200 components = 7.19961e-05 Jy
! Clean residual min=-0.013130 max=0.011214 Jy/beam
! Clean residual mean=-0.000141 rms=0.003508 Jy/beam
! Combined flux in latest and established models = 1.06136 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 173 components and 1.06136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151433Jy  sigma=0.000789
! Fit after  self-cal, rms=0.151431Jy  sigma=0.000789
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.988 mas, bmaj=21.78 mas, bpa=26.13 degrees
! Estimated noise=1948.7 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.988 x 21.78 at 26.13 degrees (North through East)
! Clean map  min=-0.012843  max=0.89214 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151431Jy  sigma=0.000789
! Fit after  self-cal, rms=0.146386Jy  sigma=0.000728
! Inverting map and beam 
! Estimated beam: bmin=3.987 mas, bmaj=21.86 mas, bpa=26.16 degrees
! Estimated noise=1943.6 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0059888 Jy
! Component: 100  -  total flux cleaned = -0.00728294 Jy
! Component: 150  -  total flux cleaned = -0.0079309 Jy
! Component: 200  -  total flux cleaned = -0.00822959 Jy
! Total flux subtracted in 200 components = -0.00822959 Jy
! Clean residual min=-0.011750 max=0.009295 Jy/beam
! Clean residual mean=-0.000091 rms=0.002825 Jy/beam
! Combined flux in latest and established models = 1.05313 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 179 components and 1.05313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.145524Jy  sigma=0.000724
! Fit after  self-cal, rms=0.145526Jy  sigma=0.000724
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000177358 Jy
! Component: 100  -  total flux cleaned = -4.43912e-05 Jy
! Component: 150  -  total flux cleaned = -0.000165718 Jy
! Component: 200  -  total flux cleaned = -5.20836e-05 Jy
! Total flux subtracted in 200 components = -5.20836e-05 Jy
! Clean residual min=-0.011464 max=0.009038 Jy/beam
! Clean residual mean=-0.000093 rms=0.002797 Jy/beam
! Combined flux in latest and established models = 1.05308 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 185 components and 1.05308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.145084Jy  sigma=0.000723
! Fit after  self-cal, rms=0.145086Jy  sigma=0.000723
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.145086Jy  sigma=0.000723
! Fit after  self-cal, rms=0.146676Jy  sigma=0.000722
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.067 mas, bmaj=20.94 mas, bpa=27.55 degrees
! Estimated noise=3041.14 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.708989 Jy
! Component: 100  -  total flux cleaned = 0.868025 Jy
! Component: 150  -  total flux cleaned = 0.931154 Jy
! Component: 200  -  total flux cleaned = 0.967771 Jy
! Total flux subtracted in 200 components = 0.967771 Jy
! Clean residual min=-0.016958 max=0.022827 Jy/beam
! Clean residual mean=-0.000238 rms=0.004654 Jy/beam
! Combined flux in latest and established models = 0.967771 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 41 model components to the UV plane model.
! The established model now contains 41 components and 0.967771 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.992 mas, bmaj=21.95 mas, bpa=26.19 degrees
! Estimated noise=1942.46 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0310923 Jy
! Component: 100  -  total flux cleaned = 0.0483108 Jy
! Component: 150  -  total flux cleaned = 0.0590483 Jy
! Component: 200  -  total flux cleaned = 0.0663387 Jy
! Total flux subtracted in 200 components = 0.0663387 Jy
! Clean residual min=-0.010068 max=0.008067 Jy/beam
! Clean residual mean=-0.000145 rms=0.002653 Jy/beam
! Combined flux in latest and established models = 1.03411 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 90 components and 1.03411 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.518 mas, bmaj=29.33 mas, bpa=16.09 degrees
! Estimated noise=2038.49 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00569462 Jy
! Component: 100  -  total flux cleaned = 0.00936024 Jy
! Component: 150  -  total flux cleaned = 0.0120276 Jy
! Component: 200  -  total flux cleaned = 0.0129594 Jy
! Total flux subtracted in 200 components = 0.0129594 Jy
! Clean residual min=-0.010832 max=0.008932 Jy/beam
! Clean residual mean=-0.000134 rms=0.002965 Jy/beam
! Combined flux in latest and established models = 1.04707 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000601938 Jy
! Component: 100  -  total flux cleaned = 0.00115789 Jy
! Component: 150  -  total flux cleaned = 0.00154539 Jy
! Component: 200  -  total flux cleaned = 0.0017895 Jy
! Total flux subtracted in 200 components = 0.0017895 Jy
! Clean residual min=-0.010691 max=0.008745 Jy/beam
! Clean residual mean=-0.000120 rms=0.002920 Jy/beam
! Combined flux in latest and established models = 1.04886 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 112 components and 1.04886 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.992 mas, bmaj=21.95 mas, bpa=26.19 degrees
! Estimated noise=1942.46 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00171233 Jy
! Component: 100  -  total flux cleaned = -0.0015799 Jy
! Component: 150  -  total flux cleaned = -0.00157698 Jy
! Component: 200  -  total flux cleaned = -0.00135018 Jy
! Total flux subtracted in 200 components = -0.00135018 Jy
! Clean residual min=-0.009495 max=0.007367 Jy/beam
! Clean residual mean=-0.000081 rms=0.002446 Jy/beam
! Combined flux in latest and established models = 1.04751 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 125 components and 1.04751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144708Jy  sigma=0.000715
! Fit after  self-cal, rms=0.144682Jy  sigma=0.000715
wmodel J0539-2839_S_2014_08_05_pus_map.mod
! Writing 125 model components to file: J0539-2839_S_2014_08_05_pus_map.mod
wobs J0539-2839_S_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J0539-2839_S_2014_08_05_pus_uvs.fits
wwins J0539-2839_S_2014_08_05_pus_map.win
! wwins: Wrote 1 windows to J0539-2839_S_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00406946 Jy
! Component: 100  -  total flux cleaned = -0.00743904 Jy
! Component: 150  -  total flux cleaned = -0.00974837 Jy
! Component: 200  -  total flux cleaned = -0.0120309 Jy
! Component: 250  -  total flux cleaned = -0.0141805 Jy
! Component: 300  -  total flux cleaned = -0.0162192 Jy
! Component: 350  -  total flux cleaned = -0.0178533 Jy
! Component: 400  -  total flux cleaned = -0.0192238 Jy
! Component: 450  -  total flux cleaned = -0.0203515 Jy
! Component: 500  -  total flux cleaned = -0.0212532 Jy
! Component: 550  -  total flux cleaned = -0.0218655 Jy
! Component: 600  -  total flux cleaned = -0.022712 Jy
! Component: 650  -  total flux cleaned = -0.0236092 Jy
! Component: 700  -  total flux cleaned = -0.0245554 Jy
! Component: 750  -  total flux cleaned = -0.0252441 Jy
! Component: 800  -  total flux cleaned = -0.0261379 Jy
! Component: 850  -  total flux cleaned = -0.0267857 Jy
! Component: 900  -  total flux cleaned = -0.0271359 Jy
! Component: 950  -  total flux cleaned = -0.027888 Jy
! Component: 1000  -  total flux cleaned = -0.028352 Jy
! Component: 1050  -  total flux cleaned = -0.0288048 Jy
! Component: 1100  -  total flux cleaned = -0.029246 Jy
! Component: 1150  -  total flux cleaned = -0.0294928 Jy
! Component: 1200  -  total flux cleaned = -0.0299137 Jy
! Component: 1250  -  total flux cleaned = -0.0302655 Jy
! Component: 1300  -  total flux cleaned = -0.0306091 Jy
! Component: 1350  -  total flux cleaned = -0.0308329 Jy
! Component: 1400  -  total flux cleaned = -0.0310533 Jy
! Component: 1450  -  total flux cleaned = -0.0311075 Jy
! Component: 1500  -  total flux cleaned = -0.0312675 Jy
! Component: 1550  -  total flux cleaned = -0.0313196 Jy
! Component: 1600  -  total flux cleaned = -0.0314742 Jy
! Component: 1650  -  total flux cleaned = -0.0315244 Jy
! Component: 1700  -  total flux cleaned = -0.0315732 Jy
! Component: 1750  -  total flux cleaned = -0.0314268 Jy
! Component: 1800  -  total flux cleaned = -0.0316208 Jy
! Component: 1850  -  total flux cleaned = -0.0317632 Jy
! Component: 1900  -  total flux cleaned = -0.031857 Jy
! Component: 1950  -  total flux cleaned = -0.0319493 Jy
! Component: 2000  -  total flux cleaned = -0.0320863 Jy
! Component: 2050  -  total flux cleaned = -0.0323112 Jy
! Component: 2100  -  total flux cleaned = -0.0323999 Jy
! Component: 2150  -  total flux cleaned = -0.0323999 Jy
! Component: 2200  -  total flux cleaned = -0.0324864 Jy
! Component: 2250  -  total flux cleaned = -0.032443 Jy
! Component: 2300  -  total flux cleaned = -0.03257 Jy
! Component: 2350  -  total flux cleaned = -0.0325274 Jy
! Component: 2400  -  total flux cleaned = -0.0326518 Jy
! Component: 2450  -  total flux cleaned = -0.0326104 Jy
! Component: 2500  -  total flux cleaned = -0.0325701 Jy
! Component: 2550  -  total flux cleaned = -0.0327714 Jy
! Component: 2600  -  total flux cleaned = -0.0328109 Jy
! Component: 2650  -  total flux cleaned = -0.0328898 Jy
! Component: 2700  -  total flux cleaned = -0.0328893 Jy
! Component: 2750  -  total flux cleaned = -0.0328506 Jy
! Component: 2800  -  total flux cleaned = -0.0330044 Jy
! Component: 2850  -  total flux cleaned = -0.0329282 Jy
! Component: 2900  -  total flux cleaned = -0.0328906 Jy
! Component: 2950  -  total flux cleaned = -0.03289 Jy
! Component: 3000  -  total flux cleaned = -0.0329272 Jy
! Component: 3050  -  total flux cleaned = -0.0330014 Jy
! Component: 3100  -  total flux cleaned = -0.0330011 Jy
! Component: 3150  -  total flux cleaned = -0.0330739 Jy
! Component: 3200  -  total flux cleaned = -0.0331102 Jy
! Component: 3250  -  total flux cleaned = -0.0330744 Jy
! Component: 3300  -  total flux cleaned = -0.0331818 Jy
! Component: 3350  -  total flux cleaned = -0.0332171 Jy
! Component: 3400  -  total flux cleaned = -0.0332525 Jy
! Component: 3450  -  total flux cleaned = -0.033287 Jy
! Component: 3500  -  total flux cleaned = -0.0333566 Jy
! Component: 3550  -  total flux cleaned = -0.0332873 Jy
! Component: 3600  -  total flux cleaned = -0.0332182 Jy
! Component: 3650  -  total flux cleaned = -0.0332181 Jy
! Component: 3700  -  total flux cleaned = -0.0332521 Jy
! Component: 3750  -  total flux cleaned = -0.0331839 Jy
! Component: 3800  -  total flux cleaned = -0.0331841 Jy
! Component: 3850  -  total flux cleaned = -0.0331503 Jy
! Component: 3900  -  total flux cleaned = -0.0331842 Jy
! Component: 3950  -  total flux cleaned = -0.0332516 Jy
! Component: 4000  -  total flux cleaned = -0.0333197 Jy
! Component: 4050  -  total flux cleaned = -0.0332858 Jy
! Total flux subtracted in 4096 components = -0.033354 Jy
! Clean residual min=-0.001981 max=0.001823 Jy/beam
! Clean residual mean=-0.000023 rms=0.000747 Jy/beam
! Combined flux in latest and established models = 1.01415 Jy
keep
! Adding 335 model components to the UV plane model.
! The established model now contains 460 components and 1.01415 Jy
![Exited script file: muppet]
wmap "J0539-2839_S_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.992 x 21.95 at 26.19 degrees (North through East)
! Clean map  min=-0.0058802  max=0.91217 Jy/beam
! Writing clean map to FITS file: J0539-2839_S_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.912166 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000724183 
device "J0539-2839_S_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J0539-2839_S_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.238175 0.238175 0.476349 0.952698 1.9054 3.81079 7.62159 15.2432 30.4863 60.9727
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0021 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.912 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.992 x 21.95 at 26.19 degrees (North through East)
! Clean map  min=-0.0058802  max=0.91217 Jy/beam
quit
! Quitting program
! Log file J0539-2839_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:17:24 2016