! Started logfile: J0524-3126_X_2014_08_05_pus_uvs.log on Sat Nov 12 21:07:09 2016
obs J0524-3126_X_2014_08_05_pus_uva.fits
! Reading UV FITS file: J0524-3126_X_2014_08_05_pus_uva.fits
! AN table 1: 121 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.781084 visibilities/baseline/integration-bin.
! Found source: J0524-3126
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 414 lines of history.
! 
! Reading 51036 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0524-3126_X_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004711Jy  sigma=0.009375
! Fit after  self-cal, rms=0.960651Jy  sigma=0.008990
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7858 mas, bmaj=4.044 mas, bpa=14.57 degrees
! Estimated noise=781.508 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0336459 Jy
! Component: 100  -  total flux cleaned = 0.0410467 Jy
! Total flux subtracted in 100 components = 0.0410467 Jy
! Clean residual min=-0.002605 max=0.002893 Jy/beam
! Clean residual mean=0.000006 rms=0.000733 Jy/beam
! Combined flux in latest and established models = 0.0410467 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0410467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091952Jy  sigma=0.000749
! Fit after  self-cal, rms=0.090267Jy  sigma=0.000732
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00440069 Jy
! Component: 100  -  total flux cleaned = 0.00409142 Jy
! Total flux subtracted in 100 components = 0.00409142 Jy
! Clean residual min=-0.002223 max=0.002513 Jy/beam
! Clean residual mean=0.000007 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.0451381 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 18 components and 0.0451381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089980Jy  sigma=0.000731
! Fit after  self-cal, rms=0.089910Jy  sigma=0.000731
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.01 mas, bmaj=4.552 mas, bpa=13.61 degrees
! Estimated noise=344.208 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00138891 Jy
! Component: 100  -  total flux cleaned = -0.00168368 Jy
! Component: 150  -  total flux cleaned = -0.00192829 Jy
! Component: 200  -  total flux cleaned = -0.00217414 Jy
! Total flux subtracted in 200 components = -0.00217414 Jy
! Clean residual min=-0.001738 max=0.001522 Jy/beam
! Clean residual mean=0.000001 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.0429639 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 28 components and 0.0429639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089810Jy  sigma=0.000730
! Fit after  self-cal, rms=0.089649Jy  sigma=0.000730
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.16     HN        0.84     KP        1.05     
!   LA        1.04     MK        1.00*    NL        1.06     OV        1.08     
!   PT        1.07     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.09     HN        0.89     KP        1.01     
!   LA        1.01     MK        1.00*    NL        1.03     OV        1.09     
!   PT        1.07     SC        1.04     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        0.93     KP        0.95     
!   LA        1.06     MK        1.00*    NL        0.93     OV        1.15     
!   PT        1.00     SC        1.05     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.13     HN        0.90     KP        0.95     
!   LA        1.01     MK        1.00*    NL        0.97     OV        1.03     
!   PT        1.02     SC        1.05     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.13     HN        0.83     KP        0.86     
!   LA        1.06     MK        1.00*    NL        1.04     OV        1.11     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.04     HN        0.85     KP        0.87     
!   LA        1.00     MK        1.00*    NL        1.01     OV        1.10     
!   PT        0.99     SC        1.07     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        0.88     KP        0.90     
!   LA        0.93     MK        1.00*    NL        1.05     OV        1.07     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.13     HN        0.87     KP        0.90     
!   LA        0.93     MK        1.00*    NL        1.06     OV        1.12     
!   PT        1.00     SC        0.94     
! 
! 
! Correcting IF 9.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        0.88     KP        0.89     
!   LA        1.01     MK        1.00*    NL        0.99     OV        1.09     
!   PT        1.04     SC        0.96     
! 
! 
! Correcting IF 10.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        0.82     KP        0.93     
!   LA        0.98     MK        1.00*    NL        1.00     OV        1.06     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 11.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        0.83     KP        0.91     
!   LA        1.05     MK        1.00*    NL        0.97     OV        1.06     
!   PT        0.93     SC        0.97     
! 
! 
! Correcting IF 12.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.03     HN        0.75     KP        0.87     
!   LA        1.02     MK        1.00*    NL        0.95     OV        1.01     
!   PT        1.01     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.089649Jy  sigma=0.000730
! Fit after  self-cal, rms=0.083614Jy  sigma=0.000728
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.004 mas, bmaj=4.45 mas, bpa=13.23 degrees
! Estimated noise=340.819 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000194908 Jy
! Component: 100  -  total flux cleaned = 0.000223528 Jy
! Component: 150  -  total flux cleaned = 0.000248466 Jy
! Component: 200  -  total flux cleaned = 0.000263371 Jy
! Total flux subtracted in 200 components = 0.000263371 Jy
! Clean residual min=-0.001012 max=0.001117 Jy/beam
! Clean residual mean=-0.000002 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.0432273 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 37 components and 0.0432273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083611Jy  sigma=0.000728
! Fit after  self-cal, rms=0.083384Jy  sigma=0.000728
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083384Jy  sigma=0.000728
! Fit after  self-cal, rms=0.082370Jy  sigma=0.000728
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=4.412 mas, bpa=13.11 degrees
! Estimated noise=340.095 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000234581 Jy
! Component: 100  -  total flux cleaned = 0.000257958 Jy
! Component: 150  -  total flux cleaned = 0.000271847 Jy
! Component: 200  -  total flux cleaned = 0.000284873 Jy
! Total flux subtracted in 200 components = 0.000284873 Jy
! Clean residual min=-0.000976 max=0.001228 Jy/beam
! Clean residual mean=-0.000003 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.0435122 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 39 components and 0.0435122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082368Jy  sigma=0.000728
! Fit after  self-cal, rms=0.082312Jy  sigma=0.000727
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.78171e-05 Jy
! Component: 100  -  total flux cleaned = -0.000116562 Jy
! Component: 150  -  total flux cleaned = -0.000110275 Jy
! Component: 200  -  total flux cleaned = -0.000116287 Jy
! Total flux subtracted in 200 components = -0.000116287 Jy
! Clean residual min=-0.000984 max=0.001205 Jy/beam
! Clean residual mean=-0.000003 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.0433959 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 44 components and 0.0433959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082311Jy  sigma=0.000727
! Fit after  self-cal, rms=0.082301Jy  sigma=0.000727
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082301Jy  sigma=0.000727
! Fit after  self-cal, rms=0.082070Jy  sigma=0.000727
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9999 mas, bmaj=4.396 mas, bpa=13.11 degrees
! Estimated noise=339.796 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000132333 Jy
! Component: 100  -  total flux cleaned = 0.000181843 Jy
! Component: 150  -  total flux cleaned = 0.000176554 Jy
! Component: 200  -  total flux cleaned = 0.000176332 Jy
! Total flux subtracted in 200 components = 0.000176332 Jy
! Clean residual min=-0.000950 max=0.001205 Jy/beam
! Clean residual mean=-0.000001 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.0435722 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 54 components and 0.0435722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082069Jy  sigma=0.000727
! Fit after  self-cal, rms=0.082076Jy  sigma=0.000727
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.24611e-06 Jy
! Component: 100  -  total flux cleaned = -4.33938e-06 Jy
! Component: 150  -  total flux cleaned = -1.17834e-07 Jy
! Component: 200  -  total flux cleaned = -5.65747e-08 Jy
! Total flux subtracted in 200 components = -5.65747e-08 Jy
! Clean residual min=-0.000968 max=0.001134 Jy/beam
! Clean residual mean=-0.000002 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.0435722 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 59 components and 0.0435722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082076Jy  sigma=0.000727
! Fit after  self-cal, rms=0.082065Jy  sigma=0.000727
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082065Jy  sigma=0.000727
! Fit after  self-cal, rms=0.082008Jy  sigma=0.000727
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.24 mas, bmaj=6.671 mas, bpa=2.882 degrees
! Estimated noise=402.016 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.84924e-05 Jy
! Component: 100  -  total flux cleaned = 0.000109551 Jy
! Component: 150  -  total flux cleaned = 0.000125559 Jy
! Component: 200  -  total flux cleaned = 0.000138541 Jy
! Total flux subtracted in 200 components = 0.000138541 Jy
! Clean residual min=-0.001287 max=0.001444 Jy/beam
! Clean residual mean=-0.000002 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.0437107 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 67 components and 0.0437107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082008Jy  sigma=0.000727
! Fit after  self-cal, rms=0.082014Jy  sigma=0.000727
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.72376e-05 Jy
! Component: 100  -  total flux cleaned = -7.66958e-05 Jy
! Component: 150  -  total flux cleaned = -7.13223e-05 Jy
! Component: 200  -  total flux cleaned = -7.60163e-05 Jy
! Total flux subtracted in 200 components = -7.60163e-05 Jy
! Clean residual min=-0.001258 max=0.001420 Jy/beam
! Clean residual mean=-0.000004 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.0436347 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 72 components and 0.0436347 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082014Jy  sigma=0.000727
! Fit after  self-cal, rms=0.082010Jy  sigma=0.000727
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9989 mas, bmaj=4.382 mas, bpa=13.11 degrees
! Estimated noise=339.353 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9989 x 4.382 at 13.11 degrees (North through East)
! Clean map  min=-0.0035531  max=0.047825 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7831 mas, bmaj=3.906 mas, bpa=14.12 degrees
! Estimated noise=748.165 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0355854 Jy
! Component: 100  -  total flux cleaned = 0.0435528 Jy
! Component: 150  -  total flux cleaned = 0.044982 Jy
! Component: 200  -  total flux cleaned = 0.0452156 Jy
! Total flux subtracted in 200 components = 0.0452156 Jy
! Clean residual min=-0.002080 max=0.002040 Jy/beam
! Clean residual mean=0.000001 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.0452156 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0452156 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9989 mas, bmaj=4.382 mas, bpa=13.11 degrees
! Estimated noise=339.353 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000687588 Jy
! Component: 100  -  total flux cleaned = -0.000767043 Jy
! Component: 150  -  total flux cleaned = -0.00083267 Jy
! Component: 200  -  total flux cleaned = -0.000860273 Jy
! Total flux subtracted in 200 components = -0.000860273 Jy
! Clean residual min=-0.001067 max=0.001239 Jy/beam
! Clean residual mean=0.000001 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.0443554 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 31 components and 0.0443554 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.24 mas, bmaj=6.671 mas, bpa=2.882 degrees
! Estimated noise=402.016 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.87595e-05 Jy
! Component: 100  -  total flux cleaned = -0.00013473 Jy
! Component: 150  -  total flux cleaned = -0.000211197 Jy
! Component: 200  -  total flux cleaned = -0.000257732 Jy
! Total flux subtracted in 200 components = -0.000257732 Jy
! Clean residual min=-0.001365 max=0.001458 Jy/beam
! Clean residual mean=-0.000001 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.0440976 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.0167e-05 Jy
! Component: 100  -  total flux cleaned = -7.6071e-05 Jy
! Component: 150  -  total flux cleaned = -9.75657e-05 Jy
! Component: 200  -  total flux cleaned = -0.000126697 Jy
! Total flux subtracted in 200 components = -0.000126697 Jy
! Clean residual min=-0.001329 max=0.001416 Jy/beam
! Clean residual mean=-0.000001 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.0439709 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 40 components and 0.0439709 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9989 mas, bmaj=4.382 mas, bpa=13.11 degrees
! Estimated noise=339.353 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137112 Jy
! Component: 100  -  total flux cleaned = 5.59252e-05 Jy
! Component: 150  -  total flux cleaned = 2.37233e-06 Jy
! Component: 200  -  total flux cleaned = -4.39284e-05 Jy
! Total flux subtracted in 200 components = -4.39284e-05 Jy
! Clean residual min=-0.000988 max=0.001183 Jy/beam
! Clean residual mean=-0.000001 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.043927 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 53 components and 0.043927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082014Jy  sigma=0.000727
! Fit after  self-cal, rms=0.082021Jy  sigma=0.000727
wmodel J0524-3126_X_2014_08_05_pus_map.mod
! Writing 53 model components to file: J0524-3126_X_2014_08_05_pus_map.mod
wobs J0524-3126_X_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J0524-3126_X_2014_08_05_pus_uvs.fits
wwins J0524-3126_X_2014_08_05_pus_map.win
! wwins: Wrote 1 windows to J0524-3126_X_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000281734 Jy
! Component: 100  -  total flux cleaned = 0.000471843 Jy
! Component: 150  -  total flux cleaned = 0.000664488 Jy
! Component: 200  -  total flux cleaned = 0.000801646 Jy
! Component: 250  -  total flux cleaned = 0.000859657 Jy
! Component: 300  -  total flux cleaned = 0.000859427 Jy
! Component: 350  -  total flux cleaned = 0.000832496 Jy
! Component: 400  -  total flux cleaned = 0.000793543 Jy
! Component: 450  -  total flux cleaned = 0.00073057 Jy
! Component: 500  -  total flux cleaned = 0.000669618 Jy
! Component: 550  -  total flux cleaned = 0.000645798 Jy
! Component: 600  -  total flux cleaned = 0.000599509 Jy
! Component: 650  -  total flux cleaned = 0.00059963 Jy
! Component: 700  -  total flux cleaned = 0.000610602 Jy
! Component: 750  -  total flux cleaned = 0.000599828 Jy
! Component: 800  -  total flux cleaned = 0.000589536 Jy
! Component: 850  -  total flux cleaned = 0.000579585 Jy
! Component: 900  -  total flux cleaned = 0.00057944 Jy
! Component: 950  -  total flux cleaned = 0.000550321 Jy
! Component: 1000  -  total flux cleaned = 0.000531291 Jy
! Component: 1050  -  total flux cleaned = 0.000512906 Jy
! Component: 1100  -  total flux cleaned = 0.000503913 Jy
! Component: 1150  -  total flux cleaned = 0.000503994 Jy
! Component: 1200  -  total flux cleaned = 0.000486562 Jy
! Component: 1250  -  total flux cleaned = 0.000460914 Jy
! Component: 1300  -  total flux cleaned = 0.000427303 Jy
! Component: 1350  -  total flux cleaned = 0.000377795 Jy
! Component: 1400  -  total flux cleaned = 0.000337274 Jy
! Component: 1450  -  total flux cleaned = 0.0002819 Jy
! Component: 1500  -  total flux cleaned = 0.000242941 Jy
! Component: 1550  -  total flux cleaned = 0.000174073 Jy
! Component: 1600  -  total flux cleaned = 0.000151624 Jy
! Component: 1650  -  total flux cleaned = 0.000114449 Jy
! Component: 1700  -  total flux cleaned = 7.06122e-05 Jy
! Component: 1750  -  total flux cleaned = 3.48463e-05 Jy
! Component: 1800  -  total flux cleaned = -4.63717e-07 Jy
! Component: 1850  -  total flux cleaned = -2.83942e-05 Jy
! Component: 1900  -  total flux cleaned = -5.59127e-05 Jy
! Component: 1950  -  total flux cleaned = -6.94029e-05 Jy
! Component: 2000  -  total flux cleaned = -8.28622e-05 Jy
! Total flux subtracted in 2048 components = -8.94495e-05 Jy
! Clean residual min=-0.000391 max=0.000403 Jy/beam
! Clean residual mean=-0.000002 rms=0.000140 Jy/beam
! Combined flux in latest and established models = 0.0438376 Jy
keep
! Adding 159 model components to the UV plane model.
! The established model now contains 212 components and 0.0438376 Jy
![Exited script file: muppet]
wmap "J0524-3126_X_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9989 x 4.382 at 13.11 degrees (North through East)
! Clean map  min=-0.0034611  max=0.047467 Jy/beam
! Writing clean map to FITS file: J0524-3126_X_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0474674 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000139333 
device "J0524-3126_X_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J0524-3126_X_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.880602 0.880602 1.7612 3.52241 7.04481 14.0896 28.1793 56.3585
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.047 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9989 x 4.382 at 13.11 degrees (North through East)
! Clean map  min=-0.0034611  max=0.047467 Jy/beam
quit
! Quitting program
! Log file J0524-3126_X_2014_08_05_pus_uvs.log closed on Sat Nov 12 21:07:12 2016