! Started logfile: J0502-3541_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:16:32 2016 obs J0502-3541_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0502-3541_S_2014_08_05_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.534244 visibilities/baseline/integration-bin. ! Found source: J0502-3541 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 11732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0502-3541_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 316 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 316 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 377 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 316 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.927267Jy sigma=0.007518 ! Fit after self-cal, rms=0.904004Jy sigma=0.007330 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.789 mas, bmaj=22.93 mas, bpa=18.55 degrees ! Estimated noise=1138.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.074387 Jy ! Component: 100 - total flux cleaned = 0.0910525 Jy ! Total flux subtracted in 100 components = 0.0910525 Jy ! Clean residual min=-0.004909 max=0.006032 Jy/beam ! Clean residual mean=0.000025 rms=0.001417 Jy/beam ! Combined flux in latest and established models = 0.0910525 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0910525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100453Jy sigma=0.000763 ! Fit after self-cal, rms=0.100436Jy sigma=0.000763 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.819 mas, bmaj=26.73 mas, bpa=17.99 degrees ! Estimated noise=832.273 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107786 Jy ! Component: 100 - total flux cleaned = 0.0158321 Jy ! Component: 150 - total flux cleaned = 0.0186133 Jy ! Component: 200 - total flux cleaned = 0.0203008 Jy ! Total flux subtracted in 200 components = 0.0203008 Jy ! Clean residual min=-0.002547 max=0.002875 Jy/beam ! Clean residual mean=0.000021 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.111353 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 84 components and 0.111353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099283Jy sigma=0.000755 ! Fit after self-cal, rms=0.099307Jy sigma=0.000754 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.87 HN 1.00* KP 1.06 ! LA 1.09 MK 1.00* NL 1.03 OV 1.02 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 HN 1.00* KP 1.00 ! LA 1.07 MK 1.00* NL 1.00 OV 1.01 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.14 HN 1.00* KP 0.92 ! LA 0.88 MK 1.00* NL 1.00* OV 0.97 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.03 HN 1.00* KP 0.88 ! LA 0.81 MK 1.00* NL 1.05 OV 0.95 ! PT 1.03 SC 1.02 ! ! ! Fit before self-cal, rms=0.099307Jy sigma=0.000754 ! Fit after self-cal, rms=0.096945Jy sigma=0.000749 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.842 mas, bmaj=26.86 mas, bpa=17.97 degrees ! Estimated noise=830.795 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.31953e-06 Jy ! Component: 100 - total flux cleaned = -0.00023524 Jy ! Component: 150 - total flux cleaned = -0.000309457 Jy ! Component: 200 - total flux cleaned = -0.000331983 Jy ! Total flux subtracted in 200 components = -0.000331983 Jy ! Clean residual min=-0.002454 max=0.002855 Jy/beam ! Clean residual mean=0.000008 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.111021 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 97 components and 0.111021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096928Jy sigma=0.000749 ! Fit after self-cal, rms=0.096904Jy sigma=0.000749 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096904Jy sigma=0.000749 ! Fit after self-cal, rms=0.096869Jy sigma=0.000749 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.839 mas, bmaj=26.8 mas, bpa=17.96 degrees ! Estimated noise=830.093 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.96917e-05 Jy ! Component: 100 - total flux cleaned = -0.000150696 Jy ! Component: 150 - total flux cleaned = -0.000194521 Jy ! Component: 200 - total flux cleaned = -0.000234459 Jy ! Total flux subtracted in 200 components = -0.000234459 Jy ! Clean residual min=-0.002376 max=0.002671 Jy/beam ! Clean residual mean=0.000010 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.110787 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 102 components and 0.110787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096858Jy sigma=0.000749 ! Fit after self-cal, rms=0.096861Jy sigma=0.000749 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.33298e-05 Jy ! Component: 100 - total flux cleaned = -5.20393e-05 Jy ! Component: 150 - total flux cleaned = -7.00439e-05 Jy ! Component: 200 - total flux cleaned = -8.75354e-05 Jy ! Total flux subtracted in 200 components = -8.75354e-05 Jy ! Clean residual min=-0.002367 max=0.002633 Jy/beam ! Clean residual mean=0.000009 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.110699 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 104 components and 0.110699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096853Jy sigma=0.000749 ! Fit after self-cal, rms=0.096853Jy sigma=0.000749 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096853Jy sigma=0.000749 ! Fit after self-cal, rms=0.096883Jy sigma=0.000748 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.836 mas, bmaj=26.78 mas, bpa=17.94 degrees ! Estimated noise=830.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.50365e-05 Jy ! Component: 100 - total flux cleaned = -0.000104619 Jy ! Component: 150 - total flux cleaned = -0.000139067 Jy ! Component: 200 - total flux cleaned = -0.000138731 Jy ! Total flux subtracted in 200 components = -0.000138731 Jy ! Clean residual min=-0.002315 max=0.002584 Jy/beam ! Clean residual mean=0.000004 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.110561 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 110 components and 0.110561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096876Jy sigma=0.000748 ! Fit after self-cal, rms=0.096896Jy sigma=0.000748 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.89681e-06 Jy ! Component: 100 - total flux cleaned = -5.61878e-06 Jy ! Component: 150 - total flux cleaned = -2.04896e-05 Jy ! Component: 200 - total flux cleaned = -6.20955e-06 Jy ! Total flux subtracted in 200 components = -6.20955e-06 Jy ! Clean residual min=-0.002290 max=0.002531 Jy/beam ! Clean residual mean=0.000004 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.110554 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 113 components and 0.110554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096892Jy sigma=0.000748 ! Fit after self-cal, rms=0.096892Jy sigma=0.000748 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096892Jy sigma=0.000748 ! Fit after self-cal, rms=0.096933Jy sigma=0.000748 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.58 mas, bmaj=37.72 mas, bpa=6.364 degrees ! Estimated noise=941.256 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000537889 Jy ! Component: 100 - total flux cleaned = 0.000634965 Jy ! Component: 150 - total flux cleaned = 0.000668813 Jy ! Component: 200 - total flux cleaned = 0.000698134 Jy ! Total flux subtracted in 200 components = 0.000698134 Jy ! Clean residual min=-0.001842 max=0.003187 Jy/beam ! Clean residual mean=0.000010 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.111252 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 134 components and 0.111252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096932Jy sigma=0.000748 ! Fit after self-cal, rms=0.096930Jy sigma=0.000748 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.29071e-05 Jy ! Component: 100 - total flux cleaned = 8.36734e-05 Jy ! Component: 150 - total flux cleaned = 0.000108947 Jy ! Component: 200 - total flux cleaned = 0.000120721 Jy ! Total flux subtracted in 200 components = 0.000120721 Jy ! Clean residual min=-0.001841 max=0.003109 Jy/beam ! Clean residual mean=0.000010 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.111373 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 155 components and 0.111373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096930Jy sigma=0.000748 ! Fit after self-cal, rms=0.096925Jy sigma=0.000748 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.834 mas, bmaj=26.74 mas, bpa=17.92 degrees ! Estimated noise=830.1 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.834 x 26.74 at 17.92 degrees (North through East) ! Clean map min=-0.0024033 max=0.096058 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.797 mas, bmaj=22.87 mas, bpa=18.5 degrees ! Estimated noise=1145.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0744617 Jy ! Component: 100 - total flux cleaned = 0.0914522 Jy ! Component: 150 - total flux cleaned = 0.0990679 Jy ! Component: 200 - total flux cleaned = 0.103596 Jy ! Total flux subtracted in 200 components = 0.103596 Jy ! Clean residual min=-0.003462 max=0.003151 Jy/beam ! Clean residual mean=0.000009 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.103596 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.103596 Jy ! Inverting map and beam ! Estimated beam: bmin=3.834 mas, bmaj=26.74 mas, bpa=17.92 degrees ! Estimated noise=830.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442601 Jy ! Component: 100 - total flux cleaned = 0.00675483 Jy ! Component: 150 - total flux cleaned = 0.00792546 Jy ! Component: 200 - total flux cleaned = 0.00819576 Jy ! Total flux subtracted in 200 components = 0.00819576 Jy ! Clean residual min=-0.002269 max=0.002681 Jy/beam ! Clean residual mean=0.000013 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.111792 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 83 components and 0.111792 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.58 mas, bmaj=37.72 mas, bpa=6.364 degrees ! Estimated noise=941.256 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000983472 Jy ! Component: 100 - total flux cleaned = 0.00107365 Jy ! Component: 150 - total flux cleaned = 0.00104797 Jy ! Component: 200 - total flux cleaned = 0.00102405 Jy ! Total flux subtracted in 200 components = 0.00102405 Jy ! Clean residual min=-0.001948 max=0.003410 Jy/beam ! Clean residual mean=0.000020 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.112816 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17, 18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280303 Jy ! Component: 100 - total flux cleaned = 0.00338879 Jy ! Component: 150 - total flux cleaned = 0.00343763 Jy ! Component: 200 - total flux cleaned = 0.0033356 Jy ! Total flux subtracted in 200 components = 0.0033356 Jy ! Clean residual min=-0.001617 max=0.001527 Jy/beam ! Clean residual mean=0.000031 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.116152 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 146 components and 0.116152 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.834 mas, bmaj=26.74 mas, bpa=17.92 degrees ! Estimated noise=830.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000719136 Jy ! Component: 100 - total flux cleaned = -0.000764461 Jy ! Component: 150 - total flux cleaned = -0.000766784 Jy ! Component: 200 - total flux cleaned = -0.000836659 Jy ! Total flux subtracted in 200 components = -0.000836659 Jy ! Clean residual min=-0.001871 max=0.002026 Jy/beam ! Clean residual mean=0.000019 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.115315 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 168 components and 0.115315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096832Jy sigma=0.000747 ! Fit after self-cal, rms=0.096818Jy sigma=0.000747 wmodel J0502-3541_S_2014_08_05_pus_map.mod ! Writing 168 model components to file: J0502-3541_S_2014_08_05_pus_map.mod wobs J0502-3541_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0502-3541_S_2014_08_05_pus_uvs.fits wwins J0502-3541_S_2014_08_05_pus_map.win ! wwins: Wrote 2 windows to J0502-3541_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000375658 Jy ! Component: 100 - total flux cleaned = -0.000722038 Jy ! Component: 150 - total flux cleaned = -0.000839618 Jy ! Component: 200 - total flux cleaned = -0.00092308 Jy ! Component: 250 - total flux cleaned = -0.00100413 Jy ! Component: 300 - total flux cleaned = -0.0010304 Jy ! Component: 350 - total flux cleaned = -0.00100564 Jy ! Component: 400 - total flux cleaned = -0.000981473 Jy ! Component: 450 - total flux cleaned = -0.00100485 Jy ! Component: 500 - total flux cleaned = -0.0010044 Jy ! Component: 550 - total flux cleaned = -0.000937455 Jy ! Component: 600 - total flux cleaned = -0.000851601 Jy ! Component: 650 - total flux cleaned = -0.000915705 Jy ! Component: 700 - total flux cleaned = -0.000915624 Jy ! Component: 750 - total flux cleaned = -0.00099699 Jy ! Component: 800 - total flux cleaned = -0.00103661 Jy ! Component: 850 - total flux cleaned = -0.00113432 Jy ! Component: 900 - total flux cleaned = -0.00119185 Jy ! Component: 950 - total flux cleaned = -0.00132448 Jy ! Component: 1000 - total flux cleaned = -0.00136149 Jy ! Component: 1050 - total flux cleaned = -0.00147193 Jy ! Component: 1100 - total flux cleaned = -0.00154434 Jy ! Component: 1150 - total flux cleaned = -0.00159804 Jy ! Component: 1200 - total flux cleaned = -0.00170345 Jy ! Component: 1250 - total flux cleaned = -0.00175571 Jy ! Component: 1300 - total flux cleaned = -0.00185806 Jy ! Component: 1350 - total flux cleaned = -0.0019591 Jy ! Component: 1400 - total flux cleaned = -0.00200872 Jy ! Component: 1450 - total flux cleaned = -0.0020578 Jy ! Component: 1500 - total flux cleaned = -0.00215487 Jy ! Component: 1550 - total flux cleaned = -0.00220245 Jy ! Component: 1600 - total flux cleaned = -0.00217083 Jy ! Component: 1650 - total flux cleaned = -0.00215556 Jy ! Component: 1700 - total flux cleaned = -0.00220188 Jy ! Component: 1750 - total flux cleaned = -0.0022171 Jy ! Component: 1800 - total flux cleaned = -0.00224705 Jy ! Component: 1850 - total flux cleaned = -0.00224722 Jy ! Component: 1900 - total flux cleaned = -0.00229143 Jy ! Component: 1950 - total flux cleaned = -0.00232032 Jy ! Component: 2000 - total flux cleaned = -0.00232033 Jy ! Component: 2050 - total flux cleaned = -0.00232036 Jy ! Component: 2100 - total flux cleaned = -0.00234847 Jy ! Component: 2150 - total flux cleaned = -0.00233446 Jy ! Component: 2200 - total flux cleaned = -0.00234814 Jy ! Component: 2250 - total flux cleaned = -0.00238908 Jy ! Component: 2300 - total flux cleaned = -0.00238904 Jy ! Component: 2350 - total flux cleaned = -0.00240252 Jy ! Component: 2400 - total flux cleaned = -0.00242912 Jy ! Component: 2450 - total flux cleaned = -0.00241599 Jy ! Component: 2500 - total flux cleaned = -0.00246791 Jy ! Component: 2550 - total flux cleaned = -0.0024293 Jy ! Component: 2600 - total flux cleaned = -0.00242929 Jy ! Component: 2650 - total flux cleaned = -0.00247982 Jy ! Component: 2700 - total flux cleaned = -0.00246729 Jy ! Component: 2750 - total flux cleaned = -0.00247966 Jy ! Component: 2800 - total flux cleaned = -0.00249199 Jy ! Component: 2850 - total flux cleaned = -0.00250424 Jy ! Component: 2900 - total flux cleaned = -0.00254056 Jy ! Component: 2950 - total flux cleaned = -0.00254065 Jy ! Component: 3000 - total flux cleaned = -0.00256434 Jy ! Component: 3050 - total flux cleaned = -0.00257611 Jy ! Component: 3100 - total flux cleaned = -0.00258776 Jy ! Component: 3150 - total flux cleaned = -0.00258772 Jy ! Component: 3200 - total flux cleaned = -0.00256456 Jy ! Component: 3250 - total flux cleaned = -0.0025531 Jy ! Component: 3300 - total flux cleaned = -0.0025532 Jy ! Component: 3350 - total flux cleaned = -0.00256469 Jy ! Component: 3400 - total flux cleaned = -0.00258701 Jy ! Component: 3450 - total flux cleaned = -0.00258689 Jy ! Component: 3500 - total flux cleaned = -0.00256479 Jy ! Component: 3550 - total flux cleaned = -0.0025428 Jy ! Component: 3600 - total flux cleaned = -0.00249934 Jy ! Component: 3650 - total flux cleaned = -0.00249946 Jy ! Component: 3700 - total flux cleaned = -0.00251032 Jy ! Component: 3750 - total flux cleaned = -0.00249971 Jy ! Component: 3800 - total flux cleaned = -0.00253147 Jy ! Component: 3850 - total flux cleaned = -0.00252076 Jy ! Component: 3900 - total flux cleaned = -0.00248936 Jy ! Component: 3950 - total flux cleaned = -0.00247905 Jy ! Component: 4000 - total flux cleaned = -0.0024482 Jy ! Component: 4050 - total flux cleaned = -0.00242779 Jy ! Total flux subtracted in 4096 components = -0.00245842 Jy ! Clean residual min=-0.000587 max=0.000570 Jy/beam ! Clean residual mean=0.000001 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.112857 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 422 components and 0.112857 Jy ![Exited script file: muppet] wmap "J0502-3541_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.834 x 26.74 at 17.92 degrees (North through East) ! Clean map min=-0.001716 max=0.09543 Jy/beam ! Writing clean map to FITS file: J0502-3541_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.09543 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000202307 device "J0502-3541_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0502-3541_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.635987 0.635987 1.27197 2.54395 5.08789 10.1758 20.3516 40.7031 81.4063 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.095 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.834 x 26.74 at 17.92 degrees (North through East) ! Clean map min=-0.001716 max=0.09543 Jy/beam quit ! Quitting program ! Log file J0502-3541_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:16:38 2016