! Started logfile: J0450+4620_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:16:14 2016 obs J0450+4620_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0450+4620_S_2014_08_05_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.765027 visibilities/baseline/integration-bin. ! Found source: J0450+4620 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 16800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0450+4620_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.974656Jy sigma=0.011233 ! Fit after self-cal, rms=0.950068Jy sigma=0.010995 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.998 mas, bmaj=6.181 mas, bpa=35.58 degrees ! Estimated noise=803.157 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.039669 Jy ! Component: 100 - total flux cleaned = 0.0483771 Jy ! Total flux subtracted in 100 components = 0.0483771 Jy ! Clean residual min=-0.002048 max=0.002647 Jy/beam ! Clean residual mean=0.000000 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.0483771 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0483771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071705Jy sigma=0.000763 ! Fit after self-cal, rms=0.071464Jy sigma=0.000762 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.932 mas, bmaj=6.947 mas, bpa=35.69 degrees ! Estimated noise=480.152 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00374782 Jy ! Component: 100 - total flux cleaned = 0.00546789 Jy ! Component: 150 - total flux cleaned = 0.00645796 Jy ! Component: 200 - total flux cleaned = 0.00705322 Jy ! Total flux subtracted in 200 components = 0.00705322 Jy ! Clean residual min=-0.001403 max=0.001717 Jy/beam ! Clean residual mean=0.000009 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0554303 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 33 components and 0.0554303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071244Jy sigma=0.000760 ! Fit after self-cal, rms=0.071244Jy sigma=0.000760 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.88 HN 1.06 KP 1.07 ! LA 1.10 MK 1.00* NL 0.92 OV 1.02 ! PT 1.00 SC 0.92 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.09 KP 1.06 ! LA 1.03 MK 1.00* NL 1.03 OV 1.05 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.08 HN 1.04 KP 0.93 ! LA 0.85 MK 1.00* NL 1.02 OV 0.98 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.02 HN 0.96 KP 0.87 ! LA 0.85 MK 1.00* NL 1.08 OV 0.99 ! PT 1.04 SC 0.98 ! ! ! Fit before self-cal, rms=0.071244Jy sigma=0.000760 ! Fit after self-cal, rms=0.069504Jy sigma=0.000758 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.928 mas, bmaj=6.981 mas, bpa=35.8 degrees ! Estimated noise=479.232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215894 Jy ! Component: 100 - total flux cleaned = 0.000165087 Jy ! Component: 150 - total flux cleaned = 0.000135842 Jy ! Component: 200 - total flux cleaned = 0.000118175 Jy ! Total flux subtracted in 200 components = 0.000118175 Jy ! Clean residual min=-0.001409 max=0.001361 Jy/beam ! Clean residual mean=0.000009 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.0555485 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.0555485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069500Jy sigma=0.000758 ! Fit after self-cal, rms=0.069457Jy sigma=0.000757 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069457Jy sigma=0.000757 ! Fit after self-cal, rms=0.069053Jy sigma=0.000757 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.957 mas, bmaj=6.957 mas, bpa=35.98 degrees ! Estimated noise=478.611 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.56448e-05 Jy ! Component: 100 - total flux cleaned = -7.4264e-05 Jy ! Component: 150 - total flux cleaned = -0.000134716 Jy ! Component: 200 - total flux cleaned = -0.000148854 Jy ! Total flux subtracted in 200 components = -0.000148854 Jy ! Clean residual min=-0.001398 max=0.001379 Jy/beam ! Clean residual mean=0.000004 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.0553997 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.0553997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069051Jy sigma=0.000757 ! Fit after self-cal, rms=0.069043Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.81914e-05 Jy ! Component: 100 - total flux cleaned = 1.66361e-06 Jy ! Component: 150 - total flux cleaned = 1.50264e-05 Jy ! Component: 200 - total flux cleaned = 2.14707e-05 Jy ! Total flux subtracted in 200 components = 2.14707e-05 Jy ! Clean residual min=-0.001416 max=0.001340 Jy/beam ! Clean residual mean=0.000005 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.0554211 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.0554211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069042Jy sigma=0.000757 ! Fit after self-cal, rms=0.069041Jy sigma=0.000757 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069041Jy sigma=0.000757 ! Fit after self-cal, rms=0.068932Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.964 mas, bmaj=6.949 mas, bpa=36.23 degrees ! Estimated noise=478.045 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.76448e-05 Jy ! Component: 100 - total flux cleaned = -9.54261e-05 Jy ! Component: 150 - total flux cleaned = -0.000114845 Jy ! Component: 200 - total flux cleaned = -0.000120739 Jy ! Total flux subtracted in 200 components = -0.000120739 Jy ! Clean residual min=-0.001413 max=0.001342 Jy/beam ! Clean residual mean=0.000004 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.0553004 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.0553004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068930Jy sigma=0.000757 ! Fit after self-cal, rms=0.068930Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.01882e-06 Jy ! Component: 100 - total flux cleaned = -1.25482e-05 Jy ! Component: 150 - total flux cleaned = -7.08007e-06 Jy ! Component: 200 - total flux cleaned = -1.83874e-06 Jy ! Total flux subtracted in 200 components = -1.83874e-06 Jy ! Clean residual min=-0.001422 max=0.001334 Jy/beam ! Clean residual mean=0.000004 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.0552986 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.0552986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068929Jy sigma=0.000757 ! Fit after self-cal, rms=0.068929Jy sigma=0.000757 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068929Jy sigma=0.000757 ! Fit after self-cal, rms=0.068847Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.773 mas, bmaj=9.166 mas, bpa=-74.18 degrees ! Estimated noise=536.057 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.28777e-05 Jy ! Component: 100 - total flux cleaned = 6.57375e-05 Jy ! Component: 150 - total flux cleaned = 5.15685e-05 Jy ! Component: 200 - total flux cleaned = 3.98073e-05 Jy ! Total flux subtracted in 200 components = 3.98073e-05 Jy ! Clean residual min=-0.001230 max=0.001204 Jy/beam ! Clean residual mean=0.000008 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.0553384 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.0553384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068846Jy sigma=0.000757 ! Fit after self-cal, rms=0.068847Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.75595e-05 Jy ! Component: 100 - total flux cleaned = 5.02346e-06 Jy ! Component: 150 - total flux cleaned = -1.83932e-06 Jy ! Component: 200 - total flux cleaned = -1.90154e-06 Jy ! Total flux subtracted in 200 components = -1.90154e-06 Jy ! Clean residual min=-0.001238 max=0.001205 Jy/beam ! Clean residual mean=0.000008 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.0553365 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 66 components and 0.0553365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068847Jy sigma=0.000757 ! Fit after self-cal, rms=0.068846Jy sigma=0.000757 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.969 mas, bmaj=6.944 mas, bpa=36.46 degrees ! Estimated noise=477.408 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.969 x 6.944 at 36.46 degrees (North through East) ! Clean map min=-0.0013874 max=0.051821 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.02 mas, bmaj=6.152 mas, bpa=36.21 degrees ! Estimated noise=802.788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0397371 Jy ! Component: 100 - total flux cleaned = 0.0485586 Jy ! Component: 150 - total flux cleaned = 0.0517465 Jy ! Component: 200 - total flux cleaned = 0.0532095 Jy ! Total flux subtracted in 200 components = 0.0532095 Jy ! Clean residual min=-0.001884 max=0.002425 Jy/beam ! Clean residual mean=0.000001 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0532095 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0532095 Jy ! Inverting map and beam ! Estimated beam: bmin=4.969 mas, bmaj=6.944 mas, bpa=36.46 degrees ! Estimated noise=477.408 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136972 Jy ! Component: 100 - total flux cleaned = 0.00185311 Jy ! Component: 150 - total flux cleaned = 0.00189343 Jy ! Component: 200 - total flux cleaned = 0.0018763 Jy ! Total flux subtracted in 200 components = 0.0018763 Jy ! Clean residual min=-0.001362 max=0.001290 Jy/beam ! Clean residual mean=0.000004 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.0550858 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 31 components and 0.0550858 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.773 mas, bmaj=9.166 mas, bpa=-74.18 degrees ! Estimated noise=536.057 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208058 Jy ! Component: 100 - total flux cleaned = 0.000240876 Jy ! Component: 150 - total flux cleaned = 0.000258441 Jy ! Component: 200 - total flux cleaned = 0.000258076 Jy ! Total flux subtracted in 200 components = 0.000258076 Jy ! Clean residual min=-0.001246 max=0.001217 Jy/beam ! Clean residual mean=0.000008 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.0553439 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.18373e-07 Jy ! Component: 100 - total flux cleaned = -6.4511e-06 Jy ! Component: 150 - total flux cleaned = -6.31639e-06 Jy ! Component: 200 - total flux cleaned = -6.58609e-06 Jy ! Total flux subtracted in 200 components = -6.58609e-06 Jy ! Clean residual min=-0.001248 max=0.001213 Jy/beam ! Clean residual mean=0.000008 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0553373 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.0553373 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.969 mas, bmaj=6.944 mas, bpa=36.46 degrees ! Estimated noise=477.408 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.2001e-05 Jy ! Component: 100 - total flux cleaned = -0.000147851 Jy ! Component: 150 - total flux cleaned = -0.000195221 Jy ! Component: 200 - total flux cleaned = -0.000203399 Jy ! Total flux subtracted in 200 components = -0.000203399 Jy ! Clean residual min=-0.001403 max=0.001320 Jy/beam ! Clean residual mean=0.000004 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.0551339 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.0551339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068851Jy sigma=0.000757 ! Fit after self-cal, rms=0.068852Jy sigma=0.000757 wmodel J0450+4620_S_2014_08_05_pus_map.mod ! Writing 45 model components to file: J0450+4620_S_2014_08_05_pus_map.mod wobs J0450+4620_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0450+4620_S_2014_08_05_pus_uvs.fits wwins J0450+4620_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J0450+4620_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201459 Jy ! Component: 100 - total flux cleaned = -0.00035695 Jy ! Component: 150 - total flux cleaned = -0.000420072 Jy ! Component: 200 - total flux cleaned = -0.000520265 Jy ! Component: 250 - total flux cleaned = -0.000673922 Jy ! Component: 300 - total flux cleaned = -0.000803178 Jy ! Component: 350 - total flux cleaned = -0.000874719 Jy ! Component: 400 - total flux cleaned = -0.000908698 Jy ! Component: 450 - total flux cleaned = -0.000874441 Jy ! Component: 500 - total flux cleaned = -0.000890715 Jy ! Component: 550 - total flux cleaned = -0.000826218 Jy ! Component: 600 - total flux cleaned = -0.000779352 Jy ! Component: 650 - total flux cleaned = -0.000718183 Jy ! Component: 700 - total flux cleaned = -0.000658433 Jy ! Component: 750 - total flux cleaned = -0.000599802 Jy ! Component: 800 - total flux cleaned = -0.00054213 Jy ! Component: 850 - total flux cleaned = -0.000527791 Jy ! Component: 900 - total flux cleaned = -0.000402323 Jy ! Component: 950 - total flux cleaned = -0.00038872 Jy ! Component: 1000 - total flux cleaned = -0.000307495 Jy ! Component: 1050 - total flux cleaned = -0.000254426 Jy ! Component: 1100 - total flux cleaned = -0.000228161 Jy ! Component: 1150 - total flux cleaned = -0.000189091 Jy ! Component: 1200 - total flux cleaned = -0.000176156 Jy ! Component: 1250 - total flux cleaned = -0.000138521 Jy ! Component: 1300 - total flux cleaned = -0.000138335 Jy ! Component: 1350 - total flux cleaned = -6.52422e-05 Jy ! Component: 1400 - total flux cleaned = -0.000137384 Jy ! Component: 1450 - total flux cleaned = -0.00013724 Jy ! Component: 1500 - total flux cleaned = -0.000113963 Jy ! Component: 1550 - total flux cleaned = -0.000113827 Jy ! Component: 1600 - total flux cleaned = -0.000125203 Jy ! Component: 1650 - total flux cleaned = -0.000136637 Jy ! Component: 1700 - total flux cleaned = -0.000114247 Jy ! Component: 1750 - total flux cleaned = -0.00010316 Jy ! Component: 1800 - total flux cleaned = -5.97377e-05 Jy ! Component: 1850 - total flux cleaned = -7.06938e-05 Jy ! Component: 1900 - total flux cleaned = -4.92879e-05 Jy ! Component: 1950 - total flux cleaned = -7.02244e-05 Jy ! Component: 2000 - total flux cleaned = -4.93306e-05 Jy ! Component: 2050 - total flux cleaned = -6.97315e-05 Jy ! Component: 2100 - total flux cleaned = -2.89254e-05 Jy ! Component: 2150 - total flux cleaned = -2.87428e-05 Jy ! Component: 2200 - total flux cleaned = -3.86617e-05 Jy ! Component: 2250 - total flux cleaned = -3.86456e-05 Jy ! Component: 2300 - total flux cleaned = -6.79925e-05 Jy ! Component: 2350 - total flux cleaned = -9.69036e-05 Jy ! Component: 2400 - total flux cleaned = -8.73296e-05 Jy ! Component: 2450 - total flux cleaned = -9.69132e-05 Jy ! Component: 2500 - total flux cleaned = -5.94707e-05 Jy ! Component: 2550 - total flux cleaned = -8.75019e-05 Jy ! Component: 2600 - total flux cleaned = -0.00011529 Jy ! Component: 2650 - total flux cleaned = -0.000124385 Jy ! Component: 2700 - total flux cleaned = -0.000169615 Jy ! Component: 2750 - total flux cleaned = -0.000178531 Jy ! Component: 2800 - total flux cleaned = -0.000151828 Jy ! Component: 2850 - total flux cleaned = -0.000169501 Jy ! Component: 2900 - total flux cleaned = -0.000186936 Jy ! Component: 2950 - total flux cleaned = -0.000161024 Jy ! Component: 3000 - total flux cleaned = -0.000169534 Jy ! Component: 3050 - total flux cleaned = -0.00012706 Jy ! Component: 3100 - total flux cleaned = -0.000152397 Jy ! Component: 3150 - total flux cleaned = -0.000144139 Jy ! Component: 3200 - total flux cleaned = -0.000102901 Jy ! Component: 3250 - total flux cleaned = -8.65733e-05 Jy ! Component: 3300 - total flux cleaned = -7.84384e-05 Jy ! Component: 3350 - total flux cleaned = -7.03636e-05 Jy ! Component: 3400 - total flux cleaned = -4.63953e-05 Jy ! Component: 3450 - total flux cleaned = -3.8651e-05 Jy ! Component: 3500 - total flux cleaned = -3.87618e-05 Jy ! Component: 3550 - total flux cleaned = -3.87565e-05 Jy ! Component: 3600 - total flux cleaned = -1.55205e-05 Jy ! Component: 3650 - total flux cleaned = -1.66549e-07 Jy ! Component: 3700 - total flux cleaned = -7.71377e-06 Jy ! Component: 3750 - total flux cleaned = -4.21023e-08 Jy ! Component: 3800 - total flux cleaned = 2.99555e-05 Jy ! Component: 3850 - total flux cleaned = 3.73541e-05 Jy ! Component: 3900 - total flux cleaned = 3.7242e-05 Jy ! Component: 3950 - total flux cleaned = 4.45986e-05 Jy ! Component: 4000 - total flux cleaned = 5.18699e-05 Jy ! Component: 4050 - total flux cleaned = 5.90778e-05 Jy ! Total flux subtracted in 4096 components = 8.06141e-05 Jy ! Clean residual min=-0.000473 max=0.000464 Jy/beam ! Clean residual mean=0.000001 rms=0.000136 Jy/beam ! Combined flux in latest and established models = 0.0552145 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 323 components and 0.0552145 Jy ![Exited script file: muppet] wmap "J0450+4620_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.969 x 6.944 at 36.46 degrees (North through East) ! Clean map min=-0.0012721 max=0.051581 Jy/beam ! Writing clean map to FITS file: J0450+4620_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0515809 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000135719 device "J0450+4620_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0450+4620_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.789357 0.789357 1.57871 3.15743 6.31486 12.6297 25.2594 50.5189 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.051 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.969 x 6.944 at 36.46 degrees (North through East) ! Clean map min=-0.0012721 max=0.051581 Jy/beam quit ! Quitting program ! Log file J0450+4620_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:16:20 2016