! Started logfile: J0343-2530_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:14:09 2016 obs J0343-2530_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0343-2530_S_2014_08_05_pus_uva.fits ! AN table 1: 101 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.788119 visibilities/baseline/integration-bin. ! Found source: J0343-2530 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 14328 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0343-2530_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.922304Jy sigma=0.008133 ! Fit after self-cal, rms=0.829619Jy sigma=0.007317 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=12.75 mas, bpa=18.48 degrees ! Estimated noise=947.469 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134515 Jy ! Component: 100 - total flux cleaned = 0.16479 Jy ! Total flux subtracted in 100 components = 0.16479 Jy ! Clean residual min=-0.008500 max=0.011065 Jy/beam ! Clean residual mean=-0.000041 rms=0.002192 Jy/beam ! Combined flux in latest and established models = 0.16479 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.16479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102726Jy sigma=0.000835 ! Fit after self-cal, rms=0.102728Jy sigma=0.000835 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.881 mas, bmaj=14.82 mas, bpa=17.71 degrees ! Estimated noise=680.121 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183726 Jy ! Component: 100 - total flux cleaned = 0.0288656 Jy ! Component: 150 - total flux cleaned = 0.0352246 Jy ! Component: 200 - total flux cleaned = 0.0391768 Jy ! Total flux subtracted in 200 components = 0.0391768 Jy ! Clean residual min=-0.006288 max=0.007993 Jy/beam ! Clean residual mean=-0.000047 rms=0.001507 Jy/beam ! Combined flux in latest and established models = 0.203967 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 72 components and 0.203967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099440Jy sigma=0.000801 ! Fit after self-cal, rms=0.099453Jy sigma=0.000801 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.85 HN 1.04 KP 1.05 ! LA 1.09 MK 1.00* NL 0.98 OV 0.92 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 1.17 KP 1.02 ! LA 1.09 MK 1.00* NL 1.03 OV 0.97 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.15 HN 1.17 KP 0.89 ! LA 0.86 MK 1.00* NL 0.98 OV 0.90 ! PT 0.98 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 1.07 KP 0.86 ! LA 0.84 MK 1.00* NL 1.07 OV 0.97 ! PT 1.03 SC 1.00 ! ! ! Fit before self-cal, rms=0.099453Jy sigma=0.000801 ! Fit after self-cal, rms=0.098563Jy sigma=0.000781 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.916 mas, bmaj=15.09 mas, bpa=17.84 degrees ! Estimated noise=679.476 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00614406 Jy ! Component: 100 - total flux cleaned = 0.00758268 Jy ! Component: 150 - total flux cleaned = 0.00801401 Jy ! Component: 200 - total flux cleaned = 0.00883179 Jy ! Total flux subtracted in 200 components = 0.00883179 Jy ! Clean residual min=-0.003211 max=0.004135 Jy/beam ! Clean residual mean=-0.000025 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.212799 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 111 components and 0.212799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098142Jy sigma=0.000777 ! Fit after self-cal, rms=0.098128Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098128Jy sigma=0.000776 ! Fit after self-cal, rms=0.099643Jy sigma=0.000773 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.916 mas, bmaj=15.04 mas, bpa=17.8 degrees ! Estimated noise=679.424 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152243 Jy ! Component: 100 - total flux cleaned = 0.00185796 Jy ! Component: 150 - total flux cleaned = 0.00248184 Jy ! Component: 200 - total flux cleaned = 0.00305909 Jy ! Total flux subtracted in 200 components = 0.00305909 Jy ! Clean residual min=-0.002344 max=0.002779 Jy/beam ! Clean residual mean=-0.000013 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.215858 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 138 components and 0.215858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099523Jy sigma=0.000772 ! Fit after self-cal, rms=0.099530Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117545 Jy ! Component: 100 - total flux cleaned = 0.00185498 Jy ! Component: 150 - total flux cleaned = 0.00225627 Jy ! Component: 200 - total flux cleaned = 0.00261247 Jy ! Total flux subtracted in 200 components = 0.00261247 Jy ! Clean residual min=-0.002058 max=0.002427 Jy/beam ! Clean residual mean=-0.000010 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.218471 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 154 components and 0.218471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099486Jy sigma=0.000771 ! Fit after self-cal, rms=0.099480Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099480Jy sigma=0.000771 ! Fit after self-cal, rms=0.101191Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.919 mas, bmaj=15 mas, bpa=17.75 degrees ! Estimated noise=677.808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000709301 Jy ! Component: 100 - total flux cleaned = 0.000929958 Jy ! Component: 150 - total flux cleaned = 0.00114679 Jy ! Component: 200 - total flux cleaned = 0.00129954 Jy ! Total flux subtracted in 200 components = 0.00129954 Jy ! Clean residual min=-0.001900 max=0.002042 Jy/beam ! Clean residual mean=-0.000005 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.21977 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 162 components and 0.21977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101153Jy sigma=0.000770 ! Fit after self-cal, rms=0.101170Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526413 Jy ! Component: 100 - total flux cleaned = 0.000710184 Jy ! Component: 150 - total flux cleaned = 0.00087003 Jy ! Component: 200 - total flux cleaned = 0.000953829 Jy ! Total flux subtracted in 200 components = 0.000953829 Jy ! Clean residual min=-0.001907 max=0.002031 Jy/beam ! Clean residual mean=-0.000005 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.220724 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 176 components and 0.220724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101158Jy sigma=0.000770 ! Fit after self-cal, rms=0.101157Jy sigma=0.000770 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101157Jy sigma=0.000770 ! Fit after self-cal, rms=0.101716Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.16 mas, bmaj=21.63 mas, bpa=8.175 degrees ! Estimated noise=751.439 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305277 Jy ! Component: 100 - total flux cleaned = 0.00049027 Jy ! Component: 150 - total flux cleaned = 0.000673191 Jy ! Component: 200 - total flux cleaned = 0.000773039 Jy ! Total flux subtracted in 200 components = 0.000773039 Jy ! Clean residual min=-0.002124 max=0.002492 Jy/beam ! Clean residual mean=-0.000006 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.221497 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 192 components and 0.221497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101707Jy sigma=0.000770 ! Fit after self-cal, rms=0.101711Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187149 Jy ! Component: 100 - total flux cleaned = 0.000387286 Jy ! Component: 150 - total flux cleaned = 0.000440456 Jy ! Component: 200 - total flux cleaned = 0.000466175 Jy ! Total flux subtracted in 200 components = 0.000466175 Jy ! Clean residual min=-0.002105 max=0.002493 Jy/beam ! Clean residual mean=-0.000006 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.221963 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 200 components and 0.221963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101707Jy sigma=0.000770 ! Fit after self-cal, rms=0.101706Jy sigma=0.000770 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.922 mas, bmaj=15.03 mas, bpa=17.76 degrees ! Estimated noise=677.142 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.922 x 15.03 at 17.76 degrees (North through East) ! Clean map min=-0.0018986 max=0.17143 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=12.85 mas, bpa=18.5 degrees ! Estimated noise=946.656 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134242 Jy ! Component: 100 - total flux cleaned = 0.164229 Jy ! Component: 150 - total flux cleaned = 0.175488 Jy ! Component: 200 - total flux cleaned = 0.182998 Jy ! Total flux subtracted in 200 components = 0.182998 Jy ! Clean residual min=-0.003857 max=0.004275 Jy/beam ! Clean residual mean=-0.000020 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.182998 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.182998 Jy ! Inverting map and beam ! Estimated beam: bmin=3.922 mas, bmaj=15.03 mas, bpa=17.76 degrees ! Estimated noise=677.142 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00875776 Jy ! Component: 100 - total flux cleaned = 0.0146247 Jy ! Component: 150 - total flux cleaned = 0.019089 Jy ! Component: 200 - total flux cleaned = 0.022585 Jy ! Total flux subtracted in 200 components = 0.022585 Jy ! Clean residual min=-0.002371 max=0.002247 Jy/beam ! Clean residual mean=-0.000024 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.205583 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 115 components and 0.205583 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.16 mas, bmaj=21.63 mas, bpa=8.175 degrees ! Estimated noise=751.439 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379348 Jy ! Component: 100 - total flux cleaned = 0.0064375 Jy ! Component: 150 - total flux cleaned = 0.0084775 Jy ! Component: 200 - total flux cleaned = 0.0101106 Jy ! Total flux subtracted in 200 components = 0.0101106 Jy ! Clean residual min=-0.002130 max=0.002422 Jy/beam ! Clean residual mean=-0.000019 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.215694 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131611 Jy ! Component: 100 - total flux cleaned = 0.00238184 Jy ! Component: 150 - total flux cleaned = 0.00324923 Jy ! Component: 200 - total flux cleaned = 0.00395857 Jy ! Total flux subtracted in 200 components = 0.00395857 Jy ! Clean residual min=-0.001996 max=0.002455 Jy/beam ! Clean residual mean=-0.000010 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.219652 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 201 components and 0.219652 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.922 mas, bmaj=15.03 mas, bpa=17.76 degrees ! Estimated noise=677.142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000735975 Jy ! Component: 100 - total flux cleaned = 0.000987984 Jy ! Component: 150 - total flux cleaned = 0.00119921 Jy ! Component: 200 - total flux cleaned = 0.00133266 Jy ! Total flux subtracted in 200 components = 0.00133266 Jy ! Clean residual min=-0.001909 max=0.002145 Jy/beam ! Clean residual mean=-0.000004 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.220985 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 216 components and 0.220985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101718Jy sigma=0.000770 ! Fit after self-cal, rms=0.101704Jy sigma=0.000770 wmodel J0343-2530_S_2014_08_05_pus_map.mod ! Writing 216 model components to file: J0343-2530_S_2014_08_05_pus_map.mod wobs J0343-2530_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0343-2530_S_2014_08_05_pus_uvs.fits wwins J0343-2530_S_2014_08_05_pus_map.win ! wwins: Wrote 2 windows to J0343-2530_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00042249 Jy ! Component: 100 - total flux cleaned = 0.000591247 Jy ! Component: 150 - total flux cleaned = 0.000345868 Jy ! Component: 200 - total flux cleaned = 0.000286079 Jy ! Component: 250 - total flux cleaned = 0.000286198 Jy ! Component: 300 - total flux cleaned = 0.000450108 Jy ! Component: 350 - total flux cleaned = 0.000503047 Jy ! Component: 400 - total flux cleaned = 0.000581096 Jy ! Component: 450 - total flux cleaned = 0.00063172 Jy ! Component: 500 - total flux cleaned = 0.000779456 Jy ! Component: 550 - total flux cleaned = 0.000922935 Jy ! Component: 600 - total flux cleaned = 0.000945908 Jy ! Component: 650 - total flux cleaned = 0.00103746 Jy ! Component: 700 - total flux cleaned = 0.00105992 Jy ! Component: 750 - total flux cleaned = 0.00108245 Jy ! Component: 800 - total flux cleaned = 0.0011049 Jy ! Component: 850 - total flux cleaned = 0.00114779 Jy ! Component: 900 - total flux cleaned = 0.00123138 Jy ! Component: 950 - total flux cleaned = 0.00131312 Jy ! Component: 1000 - total flux cleaned = 0.00135304 Jy ! Component: 1050 - total flux cleaned = 0.00131349 Jy ! Component: 1100 - total flux cleaned = 0.00127482 Jy ! Component: 1150 - total flux cleaned = 0.00121752 Jy ! Component: 1200 - total flux cleaned = 0.0012559 Jy ! Component: 1250 - total flux cleaned = 0.00118096 Jy ! Component: 1300 - total flux cleaned = 0.00114405 Jy ! Component: 1350 - total flux cleaned = 0.00114412 Jy ! Component: 1400 - total flux cleaned = 0.00114411 Jy ! Component: 1450 - total flux cleaned = 0.00107249 Jy ! Component: 1500 - total flux cleaned = 0.0010549 Jy ! Component: 1550 - total flux cleaned = 0.00105489 Jy ! Component: 1600 - total flux cleaned = 0.00100268 Jy ! Component: 1650 - total flux cleaned = 0.000934177 Jy ! Component: 1700 - total flux cleaned = 0.000934252 Jy ! Component: 1750 - total flux cleaned = 0.00088381 Jy ! Component: 1800 - total flux cleaned = 0.000800875 Jy ! Component: 1850 - total flux cleaned = 0.000784582 Jy ! Component: 1900 - total flux cleaned = 0.000767955 Jy ! Component: 1950 - total flux cleaned = 0.000687436 Jy ! Component: 2000 - total flux cleaned = 0.000671462 Jy ! Component: 2050 - total flux cleaned = 0.000576401 Jy ! Component: 2100 - total flux cleaned = 0.000513565 Jy ! Component: 2150 - total flux cleaned = 0.000466819 Jy ! Component: 2200 - total flux cleaned = 0.000435918 Jy ! Component: 2250 - total flux cleaned = 0.000374849 Jy ! Component: 2300 - total flux cleaned = 0.000344769 Jy ! Component: 2350 - total flux cleaned = 0.000299612 Jy ! Component: 2400 - total flux cleaned = 0.000269959 Jy ! Component: 2450 - total flux cleaned = 0.000211063 Jy ! Component: 2500 - total flux cleaned = 0.000225879 Jy ! Component: 2550 - total flux cleaned = 0.000196862 Jy ! Component: 2600 - total flux cleaned = 0.000196843 Jy ! Component: 2650 - total flux cleaned = 0.000211109 Jy ! Component: 2700 - total flux cleaned = 0.000182788 Jy ! Component: 2750 - total flux cleaned = 0.000211087 Jy ! Component: 2800 - total flux cleaned = 0.000238962 Jy ! Component: 2850 - total flux cleaned = 0.000225041 Jy ! Component: 2900 - total flux cleaned = 0.000225041 Jy ! Component: 2950 - total flux cleaned = 0.000197878 Jy ! Component: 3000 - total flux cleaned = 0.000238582 Jy ! Component: 3050 - total flux cleaned = 0.000252222 Jy ! Component: 3100 - total flux cleaned = 0.00029225 Jy ! Component: 3150 - total flux cleaned = 0.000292085 Jy ! Component: 3200 - total flux cleaned = 0.000331637 Jy ! Component: 3250 - total flux cleaned = 0.000331625 Jy ! Component: 3300 - total flux cleaned = 0.000318806 Jy ! Component: 3350 - total flux cleaned = 0.000370533 Jy ! Component: 3400 - total flux cleaned = 0.000344809 Jy ! Component: 3450 - total flux cleaned = 0.000370461 Jy ! Component: 3500 - total flux cleaned = 0.000408542 Jy ! Component: 3550 - total flux cleaned = 0.000383359 Jy ! Component: 3600 - total flux cleaned = 0.00035821 Jy ! Component: 3650 - total flux cleaned = 0.000395407 Jy ! Component: 3700 - total flux cleaned = 0.000370609 Jy ! Component: 3750 - total flux cleaned = 0.000382787 Jy ! Component: 3800 - total flux cleaned = 0.000394859 Jy ! Component: 3850 - total flux cleaned = 0.000394793 Jy ! Component: 3900 - total flux cleaned = 0.000346533 Jy ! Component: 3950 - total flux cleaned = 0.000370525 Jy ! Component: 4000 - total flux cleaned = 0.000406215 Jy ! Component: 4050 - total flux cleaned = 0.000394317 Jy ! Total flux subtracted in 4096 components = 0.000370723 Jy ! Clean residual min=-0.000881 max=0.000779 Jy/beam ! Clean residual mean=-0.000003 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.221356 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 508 components and 0.221356 Jy ![Exited script file: muppet] wmap "J0343-2530_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.922 x 15.03 at 17.76 degrees (North through East) ! Clean map min=-0.0015297 max=0.17421 Jy/beam ! Writing clean map to FITS file: J0343-2530_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.174214 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000238398 device "J0343-2530_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0343-2530_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.410525 0.410525 0.82105 1.6421 3.2842 6.5684 13.1368 26.2736 52.5472 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.174 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.922 x 15.03 at 17.76 degrees (North through East) ! Clean map min=-0.0015297 max=0.17421 Jy/beam quit ! Quitting program ! Log file J0343-2530_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:14:15 2016