! Started logfile: J0330-0551_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:14:03 2016 obs J0330-0551_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0330-0551_S_2014_08_05_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.776513 visibilities/baseline/integration-bin. ! Found source: J0330-0551 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 17192 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0330-0551_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.009143Jy sigma=0.009793 ! Fit after self-cal, rms=0.959183Jy sigma=0.009401 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.529 mas, bmaj=9.758 mas, bpa=21.93 degrees ! Estimated noise=903.784 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0361269 Jy ! Component: 100 - total flux cleaned = 0.0440188 Jy ! Total flux subtracted in 100 components = 0.0440188 Jy ! Clean residual min=-0.004767 max=0.005968 Jy/beam ! Clean residual mean=-0.000002 rms=0.001266 Jy/beam ! Combined flux in latest and established models = 0.0440187 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0440187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133447Jy sigma=0.000841 ! Fit after self-cal, rms=0.132360Jy sigma=0.000826 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.394 mas, bmaj=10.89 mas, bpa=19.03 degrees ! Estimated noise=570.896 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322197 Jy ! Component: 100 - total flux cleaned = 0.00494759 Jy ! Component: 150 - total flux cleaned = 0.00600816 Jy ! Component: 200 - total flux cleaned = 0.00670612 Jy ! Total flux subtracted in 200 components = 0.00670612 Jy ! Clean residual min=-0.003557 max=0.004618 Jy/beam ! Clean residual mean=-0.000004 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.0507249 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 36 components and 0.0507249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132126Jy sigma=0.000826 ! Fit after self-cal, rms=0.132114Jy sigma=0.000826 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.91 HN 1.02 KP 1.13 ! LA 1.10 MK 1.00* NL 1.24 OV 1.17 ! PT 1.06 SC 1.02 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.04 HN 1.07 KP 1.06 ! LA 1.02 MK 1.00* NL 1.17 OV 1.21 ! PT 1.07 SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.07 HN 1.03 KP 0.95 ! LA 0.92 MK 1.00* NL 1.13 OV 0.95 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.10 HN 0.90 KP 0.72 ! LA 0.71 MK 1.00* NL 1.01 OV 0.97 ! PT 0.86 SC 1.00 ! ! ! Fit before self-cal, rms=0.132114Jy sigma=0.000826 ! Fit after self-cal, rms=0.122255Jy sigma=0.000821 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.382 mas, bmaj=10.9 mas, bpa=18.96 degrees ! Estimated noise=595.974 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201929 Jy ! Component: 100 - total flux cleaned = 0.00267309 Jy ! Component: 150 - total flux cleaned = 0.00278856 Jy ! Component: 200 - total flux cleaned = 0.00286132 Jy ! Total flux subtracted in 200 components = 0.00286132 Jy ! Clean residual min=-0.003297 max=0.004222 Jy/beam ! Clean residual mean=-0.000003 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.0535862 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.0535862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122146Jy sigma=0.000821 ! Fit after self-cal, rms=0.122320Jy sigma=0.000819 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122320Jy sigma=0.000819 ! Fit after self-cal, rms=0.091203Jy sigma=0.000805 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.393 mas, bmaj=10.72 mas, bpa=18.32 degrees ! Estimated noise=596.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000608122 Jy ! Component: 100 - total flux cleaned = 0.000812601 Jy ! Component: 150 - total flux cleaned = 0.000971175 Jy ! Component: 200 - total flux cleaned = 0.0010852 Jy ! Total flux subtracted in 200 components = 0.0010852 Jy ! Clean residual min=-0.001759 max=0.001885 Jy/beam ! Clean residual mean=0.000000 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.0546714 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.0546714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091188Jy sigma=0.000805 ! Fit after self-cal, rms=0.091257Jy sigma=0.000801 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000495118 Jy ! Component: 100 - total flux cleaned = 0.000556051 Jy ! Component: 150 - total flux cleaned = 0.000626686 Jy ! Component: 200 - total flux cleaned = 0.000687692 Jy ! Total flux subtracted in 200 components = 0.000687692 Jy ! Clean residual min=-0.002229 max=0.002217 Jy/beam ! Clean residual mean=-0.000004 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.0553591 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 0.0553591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091245Jy sigma=0.000801 ! Fit after self-cal, rms=0.091236Jy sigma=0.000801 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091236Jy sigma=0.000801 ! Fit after self-cal, rms=0.093165Jy sigma=0.000800 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.411 mas, bmaj=10.67 mas, bpa=18.32 degrees ! Estimated noise=599.356 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000571576 Jy ! Component: 100 - total flux cleaned = 0.000799797 Jy ! Component: 150 - total flux cleaned = 0.000983374 Jy ! Component: 200 - total flux cleaned = 0.00114812 Jy ! Total flux subtracted in 200 components = 0.00114812 Jy ! Clean residual min=-0.001888 max=0.002337 Jy/beam ! Clean residual mean=-0.000001 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.0565072 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 64 components and 0.0565072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093150Jy sigma=0.000800 ! Fit after self-cal, rms=0.093242Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (74, -26.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171289 Jy ! Component: 100 - total flux cleaned = 0.00176482 Jy ! Component: 150 - total flux cleaned = 0.00185046 Jy ! Component: 200 - total flux cleaned = 0.00184817 Jy ! Total flux subtracted in 200 components = 0.00184817 Jy ! Clean residual min=-0.001896 max=0.001850 Jy/beam ! Clean residual mean=-0.000002 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.0583554 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 0.0583554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093185Jy sigma=0.000799 ! Fit after self-cal, rms=0.093150Jy sigma=0.000798 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093150Jy sigma=0.000798 ! Fit after self-cal, rms=0.093837Jy sigma=0.000798 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.359 mas, bmaj=13.44 mas, bpa=9.322 degrees ! Estimated noise=674.364 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162263 Jy ! Component: 100 - total flux cleaned = 0.00207777 Jy ! Component: 150 - total flux cleaned = 0.00229298 Jy ! Component: 200 - total flux cleaned = 0.00239787 Jy ! Total flux subtracted in 200 components = 0.00239787 Jy ! Clean residual min=-0.001894 max=0.002011 Jy/beam ! Clean residual mean=-0.000002 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.0607532 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 104 components and 0.0607532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093813Jy sigma=0.000798 ! Fit after self-cal, rms=0.093848Jy sigma=0.000798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000808002 Jy ! Component: 100 - total flux cleaned = 0.000921503 Jy ! Component: 150 - total flux cleaned = 0.000945454 Jy ! Component: 200 - total flux cleaned = 0.000990028 Jy ! Total flux subtracted in 200 components = 0.000990028 Jy ! Clean residual min=-0.001999 max=0.002120 Jy/beam ! Clean residual mean=-0.000003 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.0617433 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 120 components and 0.0617433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093836Jy sigma=0.000797 ! Fit after self-cal, rms=0.093820Jy sigma=0.000797 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.416 mas, bmaj=10.62 mas, bpa=18.28 degrees ! Estimated noise=600.067 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.416 x 10.62 at 18.28 degrees (North through East) ! Clean map min=-0.001808 max=0.048359 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=9.273 mas, bpa=20.36 degrees ! Estimated noise=906.074 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0380976 Jy ! Component: 100 - total flux cleaned = 0.0467696 Jy ! Component: 150 - total flux cleaned = 0.050524 Jy ! Component: 200 - total flux cleaned = 0.0523964 Jy ! Total flux subtracted in 200 components = 0.0523964 Jy ! Clean residual min=-0.003533 max=0.003639 Jy/beam ! Clean residual mean=0.000001 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.0523963 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0523963 Jy ! Inverting map and beam ! Estimated beam: bmin=4.416 mas, bmaj=10.62 mas, bpa=18.28 degrees ! Estimated noise=600.067 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00384034 Jy ! Component: 100 - total flux cleaned = 0.00564254 Jy ! Component: 150 - total flux cleaned = 0.00698125 Jy ! Component: 200 - total flux cleaned = 0.0077505 Jy ! Total flux subtracted in 200 components = 0.0077505 Jy ! Clean residual min=-0.001924 max=0.001838 Jy/beam ! Clean residual mean=-0.000002 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0601468 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 65 components and 0.0601468 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.359 mas, bmaj=13.44 mas, bpa=9.322 degrees ! Estimated noise=674.364 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016177 Jy ! Component: 100 - total flux cleaned = 0.00235184 Jy ! Component: 150 - total flux cleaned = 0.0027011 Jy ! Component: 200 - total flux cleaned = 0.00293698 Jy ! Total flux subtracted in 200 components = 0.00293698 Jy ! Clean residual min=-0.001849 max=0.001823 Jy/beam ! Clean residual mean=-0.000002 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.0630838 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121661 Jy ! Component: 100 - total flux cleaned = 0.000259062 Jy ! Component: 150 - total flux cleaned = 0.00038299 Jy ! Component: 200 - total flux cleaned = 0.000473329 Jy ! Total flux subtracted in 200 components = 0.000473329 Jy ! Clean residual min=-0.001807 max=0.001830 Jy/beam ! Clean residual mean=-0.000002 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0635572 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 139 components and 0.0635571 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.416 mas, bmaj=10.62 mas, bpa=18.28 degrees ! Estimated noise=600.067 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.26115e-05 Jy ! Component: 100 - total flux cleaned = 0.000290064 Jy ! Component: 150 - total flux cleaned = 0.000525011 Jy ! Component: 200 - total flux cleaned = 0.000588091 Jy ! Total flux subtracted in 200 components = 0.000588091 Jy ! Clean residual min=-0.001608 max=0.001689 Jy/beam ! Clean residual mean=-0.000001 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.0641452 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 165 components and 0.0641452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093767Jy sigma=0.000797 ! Fit after self-cal, rms=0.093738Jy sigma=0.000796 wmodel J0330-0551_S_2014_08_05_pus_map.mod ! Writing 165 model components to file: J0330-0551_S_2014_08_05_pus_map.mod wobs J0330-0551_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0330-0551_S_2014_08_05_pus_uvs.fits wwins J0330-0551_S_2014_08_05_pus_map.win ! wwins: Wrote 3 windows to J0330-0551_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000442147 Jy ! Component: 100 - total flux cleaned = 0.000412226 Jy ! Component: 150 - total flux cleaned = 0.000297643 Jy ! Component: 200 - total flux cleaned = 0.000186512 Jy ! Component: 250 - total flux cleaned = 2.75797e-05 Jy ! Component: 300 - total flux cleaned = -0.000125921 Jy ! Component: 350 - total flux cleaned = -0.000275824 Jy ! Component: 400 - total flux cleaned = -0.000493873 Jy ! Component: 450 - total flux cleaned = -0.000587949 Jy ! Component: 500 - total flux cleaned = -0.000726488 Jy ! Component: 550 - total flux cleaned = -0.000771163 Jy ! Component: 600 - total flux cleaned = -0.000815175 Jy ! Component: 650 - total flux cleaned = -0.00079323 Jy ! Component: 700 - total flux cleaned = -0.000793174 Jy ! Component: 750 - total flux cleaned = -0.000771893 Jy ! Component: 800 - total flux cleaned = -0.000751507 Jy ! Component: 850 - total flux cleaned = -0.000711803 Jy ! Component: 900 - total flux cleaned = -0.000692099 Jy ! Component: 950 - total flux cleaned = -0.000633967 Jy ! Component: 1000 - total flux cleaned = -0.00059573 Jy ! Component: 1050 - total flux cleaned = -0.000576832 Jy ! Component: 1100 - total flux cleaned = -0.000448311 Jy ! Component: 1150 - total flux cleaned = -0.000466362 Jy ! Component: 1200 - total flux cleaned = -0.000377124 Jy ! Component: 1250 - total flux cleaned = -0.000324555 Jy ! Component: 1300 - total flux cleaned = -0.000221364 Jy ! Component: 1350 - total flux cleaned = -0.000187283 Jy ! Component: 1400 - total flux cleaned = -5.38629e-05 Jy ! Component: 1450 - total flux cleaned = -7.04841e-05 Jy ! Component: 1500 - total flux cleaned = 2.6928e-05 Jy ! Component: 1550 - total flux cleaned = 7.50363e-05 Jy ! Component: 1600 - total flux cleaned = 7.52907e-05 Jy ! Component: 1650 - total flux cleaned = 0.000169007 Jy ! Component: 1700 - total flux cleaned = 0.000261254 Jy ! Component: 1750 - total flux cleaned = 0.000306266 Jy ! Component: 1800 - total flux cleaned = 0.000321021 Jy ! Component: 1850 - total flux cleaned = 0.000350483 Jy ! Component: 1900 - total flux cleaned = 0.00040934 Jy ! Component: 1950 - total flux cleaned = 0.00052454 Jy ! Component: 2000 - total flux cleaned = 0.000552691 Jy ! Component: 2050 - total flux cleaned = 0.000595032 Jy ! Component: 2100 - total flux cleaned = 0.000650828 Jy ! Component: 2150 - total flux cleaned = 0.000733307 Jy ! Component: 2200 - total flux cleaned = 0.00076039 Jy ! Component: 2250 - total flux cleaned = 0.00084103 Jy ! Component: 2300 - total flux cleaned = 0.000920584 Jy ! Component: 2350 - total flux cleaned = 0.000959907 Jy ! Component: 2400 - total flux cleaned = 0.000985976 Jy ! Component: 2450 - total flux cleaned = 0.00106322 Jy ! Component: 2500 - total flux cleaned = 0.00108845 Jy ! Component: 2550 - total flux cleaned = 0.00111346 Jy ! Component: 2600 - total flux cleaned = 0.00115093 Jy ! Component: 2650 - total flux cleaned = 0.00118807 Jy ! Component: 2700 - total flux cleaned = 0.00124902 Jy ! Component: 2750 - total flux cleaned = 0.00129746 Jy ! Component: 2800 - total flux cleaned = 0.00132163 Jy ! Component: 2850 - total flux cleaned = 0.00140468 Jy ! Component: 2900 - total flux cleaned = 0.00148697 Jy ! Component: 2950 - total flux cleaned = 0.00152164 Jy ! Component: 3000 - total flux cleaned = 0.00154472 Jy ! Component: 3050 - total flux cleaned = 0.0015675 Jy ! Component: 3100 - total flux cleaned = 0.00160167 Jy ! Component: 3150 - total flux cleaned = 0.00162419 Jy ! Component: 3200 - total flux cleaned = 0.00162431 Jy ! Component: 3250 - total flux cleaned = 0.00163544 Jy ! Component: 3300 - total flux cleaned = 0.00169038 Jy ! Component: 3350 - total flux cleaned = 0.00165769 Jy ! Component: 3400 - total flux cleaned = 0.00169014 Jy ! Component: 3450 - total flux cleaned = 0.00170085 Jy ! Component: 3500 - total flux cleaned = 0.00167978 Jy ! Component: 3550 - total flux cleaned = 0.00170082 Jy ! Component: 3600 - total flux cleaned = 0.00171137 Jy ! Component: 3650 - total flux cleaned = 0.00171141 Jy ! Component: 3700 - total flux cleaned = 0.00173192 Jy ! Component: 3750 - total flux cleaned = 0.00172173 Jy ! Component: 3800 - total flux cleaned = 0.00175205 Jy ! Component: 3850 - total flux cleaned = 0.0017318 Jy ! Component: 3900 - total flux cleaned = 0.00170195 Jy ! Component: 3950 - total flux cleaned = 0.00168216 Jy ! Component: 4000 - total flux cleaned = 0.0016427 Jy ! Component: 4050 - total flux cleaned = 0.00163289 Jy ! Total flux subtracted in 4096 components = 0.00160369 Jy ! Clean residual min=-0.000559 max=0.000537 Jy/beam ! Clean residual mean=-0.000002 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.0657489 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 462 components and 0.065749 Jy ![Exited script file: muppet] wmap "J0330-0551_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.416 x 10.62 at 18.28 degrees (North through East) ! Clean map min=-0.0016399 max=0.047969 Jy/beam ! Writing clean map to FITS file: J0330-0551_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0479692 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000193108 device "J0330-0551_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0330-0551_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.2077 1.2077 2.4154 4.8308 9.6616 19.3232 38.6464 77.2928 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.047 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.416 x 10.62 at 18.28 degrees (North through East) ! Clean map min=-0.0016399 max=0.047969 Jy/beam quit ! Quitting program ! Log file J0330-0551_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:14:09 2016