! Started logfile: J0239-0234_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:12:28 2016
obs J0239-0234_S_2014_08_05_pus_uva.fits
! Reading UV FITS file: J0239-0234_S_2014_08_05_pus_uva.fits
! AN table 1: 34 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.703268 visibilities/baseline/integration-bin.
! Found source: J0239-0234
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 360 lines of history.
! 
! Reading 4304 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0239-0234_S_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.624411Jy  sigma=0.006577
! Fit after  self-cal, rms=0.611546Jy  sigma=0.006450
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.448 mas, bmaj=10.03 mas, bpa=19.54 degrees
! Estimated noise=1291.51 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.301993 Jy
! Component: 100  -  total flux cleaned = 0.368459 Jy
! Total flux subtracted in 100 components = 0.368459 Jy
! Clean residual min=-0.014686 max=0.021683 Jy/beam
! Clean residual mean=0.000001 rms=0.004315 Jy/beam
! Combined flux in latest and established models = 0.368459 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.368459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109685Jy  sigma=0.001058
! Fit after  self-cal, rms=0.109670Jy  sigma=0.001058
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.223 mas, bmaj=10.81 mas, bpa=17.98 degrees
! Estimated noise=1048.35 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0288713 Jy
! Component: 100  -  total flux cleaned = 0.0437323 Jy
! Component: 150  -  total flux cleaned = 0.0519871 Jy
! Component: 200  -  total flux cleaned = 0.0568213 Jy
! Total flux subtracted in 200 components = 0.0568213 Jy
! Clean residual min=-0.014560 max=0.014283 Jy/beam
! Clean residual mean=-0.000001 rms=0.003243 Jy/beam
! Combined flux in latest and established models = 0.42528 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 69 components and 0.42528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100875Jy  sigma=0.000988
! Fit after  self-cal, rms=0.100858Jy  sigma=0.000987
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.90     HN        0.97     KP        1.05     
!   LA        1.18     MK        1.00*    NL        0.93     OV        0.98     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        1.04     KP        1.01     
!   LA        1.12     MK        1.00*    NL        0.99     OV        1.02     
!   PT        1.02     SC        1.06     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.22     HN        1.00     KP        0.90     
!   LA        0.87     MK        1.00*    NL        0.98     OV        0.91     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.08     HN        1.03     KP        0.85     
!   LA        0.83     MK        1.00*    NL        1.08     OV        0.95     
!   PT        1.02     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.100858Jy  sigma=0.000987
! Fit after  self-cal, rms=0.088697Jy  sigma=0.000872
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.24 mas, bmaj=10.81 mas, bpa=17.66 degrees
! Estimated noise=1054.78 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00261318 Jy
! Component: 100  -  total flux cleaned = 0.00262105 Jy
! Component: 150  -  total flux cleaned = 0.00225115 Jy
! Component: 200  -  total flux cleaned = 0.00208287 Jy
! Total flux subtracted in 200 components = 0.00208287 Jy
! Clean residual min=-0.013030 max=0.012415 Jy/beam
! Clean residual mean=-0.000004 rms=0.002832 Jy/beam
! Combined flux in latest and established models = 0.427363 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 82 components and 0.427363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088385Jy  sigma=0.000869
! Fit after  self-cal, rms=0.088387Jy  sigma=0.000869
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088387Jy  sigma=0.000869
! Fit after  self-cal, rms=0.080389Jy  sigma=0.000775
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.277 mas, bmaj=10.91 mas, bpa=18.13 degrees
! Estimated noise=1059.53 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00365778 Jy
! Component: 100  -  total flux cleaned = -0.00435723 Jy
! Component: 150  -  total flux cleaned = -0.00456074 Jy
! Component: 200  -  total flux cleaned = -0.0047876 Jy
! Total flux subtracted in 200 components = -0.0047876 Jy
! Clean residual min=-0.003186 max=0.003923 Jy/beam
! Clean residual mean=0.000000 rms=0.000892 Jy/beam
! Combined flux in latest and established models = 0.422576 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 93 components and 0.422576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080191Jy  sigma=0.000773
! Fit after  self-cal, rms=0.080176Jy  sigma=0.000773
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (83, -78.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00364771 Jy
! Component: 100  -  total flux cleaned = 0.00525721 Jy
! Component: 150  -  total flux cleaned = 0.00583178 Jy
! Component: 200  -  total flux cleaned = 0.00599955 Jy
! Total flux subtracted in 200 components = 0.00599955 Jy
! Clean residual min=-0.002980 max=0.003077 Jy/beam
! Clean residual mean=-0.000000 rms=0.000805 Jy/beam
! Combined flux in latest and established models = 0.428575 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 123 components and 0.428575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079982Jy  sigma=0.000771
! Fit after  self-cal, rms=0.079972Jy  sigma=0.000771
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079972Jy  sigma=0.000771
! Fit after  self-cal, rms=0.079952Jy  sigma=0.000770
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.285 mas, bmaj=10.94 mas, bpa=18.14 degrees
! Estimated noise=1058.43 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00134501 Jy
! Component: 100  -  total flux cleaned = -0.001179 Jy
! Component: 150  -  total flux cleaned = -0.00108358 Jy
! Component: 200  -  total flux cleaned = -0.000949214 Jy
! Total flux subtracted in 200 components = -0.000949214 Jy
! Clean residual min=-0.002708 max=0.003156 Jy/beam
! Clean residual mean=0.000001 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.427626 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 133 components and 0.427626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079869Jy  sigma=0.000769
! Fit after  self-cal, rms=0.079869Jy  sigma=0.000769
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000169228 Jy
! Component: 100  -  total flux cleaned = 0.000250968 Jy
! Component: 150  -  total flux cleaned = 0.000329285 Jy
! Component: 200  -  total flux cleaned = 0.000440467 Jy
! Total flux subtracted in 200 components = 0.000440467 Jy
! Clean residual min=-0.002629 max=0.003116 Jy/beam
! Clean residual mean=0.000001 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.428067 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 141 components and 0.428067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079832Jy  sigma=0.000769
! Fit after  self-cal, rms=0.079830Jy  sigma=0.000769
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079830Jy  sigma=0.000769
! Fit after  self-cal, rms=0.079816Jy  sigma=0.000769
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.078 mas, bmaj=13.45 mas, bpa=8.212 degrees
! Estimated noise=1177.34 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000917651 Jy
! Component: 100  -  total flux cleaned = -0.00098694 Jy
! Component: 150  -  total flux cleaned = -0.000962351 Jy
! Component: 200  -  total flux cleaned = -0.000983278 Jy
! Total flux subtracted in 200 components = -0.000983278 Jy
! Clean residual min=-0.002360 max=0.002797 Jy/beam
! Clean residual mean=0.000002 rms=0.000756 Jy/beam
! Combined flux in latest and established models = 0.427083 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 152 components and 0.427083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079798Jy  sigma=0.000769
! Fit after  self-cal, rms=0.079797Jy  sigma=0.000769
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.71233e-05 Jy
! Component: 100  -  total flux cleaned = -2.01521e-05 Jy
! Component: 150  -  total flux cleaned = 3.20845e-05 Jy
! Component: 200  -  total flux cleaned = 9.65901e-05 Jy
! Total flux subtracted in 200 components = 9.65901e-05 Jy
! Clean residual min=-0.002338 max=0.002827 Jy/beam
! Clean residual mean=0.000002 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.42718 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 163 components and 0.42718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079791Jy  sigma=0.000769
! Fit after  self-cal, rms=0.079791Jy  sigma=0.000769
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.291 mas, bmaj=10.95 mas, bpa=18.14 degrees
! Estimated noise=1057.5 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.291 x 10.95 at 18.14 degrees (North through East)
! Clean map  min=-0.0026066  max=0.39498 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.508 mas, bmaj=10.15 mas, bpa=19.64 degrees
! Estimated noise=1307.66 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.305643 Jy
! Component: 100  -  total flux cleaned = 0.372428 Jy
! Component: 150  -  total flux cleaned = 0.392543 Jy
! Component: 200  -  total flux cleaned = 0.403529 Jy
! Total flux subtracted in 200 components = 0.403529 Jy
! Clean residual min=-0.005244 max=0.005926 Jy/beam
! Clean residual mean=0.000001 rms=0.001278 Jy/beam
! Combined flux in latest and established models = 0.403529 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.403529 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.291 mas, bmaj=10.95 mas, bpa=18.14 degrees
! Estimated noise=1057.5 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00790095 Jy
! Component: 100  -  total flux cleaned = 0.0128073 Jy
! Component: 150  -  total flux cleaned = 0.0163026 Jy
! Component: 200  -  total flux cleaned = 0.0188881 Jy
! Total flux subtracted in 200 components = 0.0188881 Jy
! Clean residual min=-0.002875 max=0.003188 Jy/beam
! Clean residual mean=0.000001 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.422417 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 47 components and 0.422417 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.078 mas, bmaj=13.45 mas, bpa=8.212 degrees
! Estimated noise=1177.34 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00224252 Jy
! Component: 100  -  total flux cleaned = 0.00284519 Jy
! Component: 150  -  total flux cleaned = 0.00324363 Jy
! Component: 200  -  total flux cleaned = 0.00354557 Jy
! Total flux subtracted in 200 components = 0.00354557 Jy
! Clean residual min=-0.002486 max=0.002810 Jy/beam
! Clean residual mean=0.000002 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.425962 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000265651 Jy
! Component: 100  -  total flux cleaned = 0.000532396 Jy
! Component: 150  -  total flux cleaned = 0.000679965 Jy
! Component: 200  -  total flux cleaned = 0.000814783 Jy
! Total flux subtracted in 200 components = 0.000814783 Jy
! Clean residual min=-0.002456 max=0.002870 Jy/beam
! Clean residual mean=0.000002 rms=0.000769 Jy/beam
! Combined flux in latest and established models = 0.426777 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 98 components and 0.426777 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.291 mas, bmaj=10.95 mas, bpa=18.14 degrees
! Estimated noise=1057.5 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.63273e-07 Jy
! Component: 100  -  total flux cleaned = 9.83939e-05 Jy
! Component: 150  -  total flux cleaned = 0.000143108 Jy
! Component: 200  -  total flux cleaned = 0.000226333 Jy
! Total flux subtracted in 200 components = 0.000226333 Jy
! Clean residual min=-0.002632 max=0.003057 Jy/beam
! Clean residual mean=0.000001 rms=0.000737 Jy/beam
! Combined flux in latest and established models = 0.427004 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 116 components and 0.427004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079880Jy  sigma=0.000769
! Fit after  self-cal, rms=0.079876Jy  sigma=0.000769
wmodel J0239-0234_S_2014_08_05_pus_map.mod
! Writing 116 model components to file: J0239-0234_S_2014_08_05_pus_map.mod
wobs J0239-0234_S_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J0239-0234_S_2014_08_05_pus_uvs.fits
wwins J0239-0234_S_2014_08_05_pus_map.win
! wwins: Wrote 2 windows to J0239-0234_S_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110361 Jy
! Component: 100  -  total flux cleaned = 0.00124422 Jy
! Component: 150  -  total flux cleaned = 0.00124682 Jy
! Component: 200  -  total flux cleaned = 0.00133585 Jy
! Component: 250  -  total flux cleaned = 0.00129543 Jy
! Component: 300  -  total flux cleaned = 0.00117589 Jy
! Component: 350  -  total flux cleaned = 0.00109756 Jy
! Component: 400  -  total flux cleaned = 0.000945077 Jy
! Component: 450  -  total flux cleaned = 0.000834372 Jy
! Component: 500  -  total flux cleaned = 0.000762058 Jy
! Component: 550  -  total flux cleaned = 0.000726944 Jy
! Component: 600  -  total flux cleaned = 0.000691856 Jy
! Component: 650  -  total flux cleaned = 0.000556325 Jy
! Component: 700  -  total flux cleaned = 0.000489947 Jy
! Component: 750  -  total flux cleaned = 0.000489762 Jy
! Component: 800  -  total flux cleaned = 0.000457256 Jy
! Component: 850  -  total flux cleaned = 0.000456775 Jy
! Component: 900  -  total flux cleaned = 0.000456749 Jy
! Component: 950  -  total flux cleaned = 0.000457142 Jy
! Component: 1000  -  total flux cleaned = 0.000517512 Jy
! Component: 1050  -  total flux cleaned = 0.000457933 Jy
! Component: 1100  -  total flux cleaned = 0.000486897 Jy
! Component: 1150  -  total flux cleaned = 0.000515319 Jy
! Component: 1200  -  total flux cleaned = 0.000656754 Jy
! Component: 1250  -  total flux cleaned = 0.000684106 Jy
! Component: 1300  -  total flux cleaned = 0.000601116 Jy
! Component: 1350  -  total flux cleaned = 0.000519933 Jy
! Component: 1400  -  total flux cleaned = 0.000546488 Jy
! Component: 1450  -  total flux cleaned = 0.000386326 Jy
! Component: 1500  -  total flux cleaned = 0.000333788 Jy
! Component: 1550  -  total flux cleaned = 0.000333198 Jy
! Component: 1600  -  total flux cleaned = 0.000255911 Jy
! Component: 1650  -  total flux cleaned = 0.000230425 Jy
! Component: 1700  -  total flux cleaned = 0.00020486 Jy
! Component: 1750  -  total flux cleaned = 0.000155409 Jy
! Component: 1800  -  total flux cleaned = 0.000229383 Jy
! Component: 1850  -  total flux cleaned = 0.000204911 Jy
! Component: 1900  -  total flux cleaned = 0.000180724 Jy
! Component: 1950  -  total flux cleaned = 0.000180821 Jy
! Component: 2000  -  total flux cleaned = 0.000227808 Jy
! Component: 2050  -  total flux cleaned = 0.000250969 Jy
! Component: 2100  -  total flux cleaned = 0.00015849 Jy
! Component: 2150  -  total flux cleaned = 0.000135478 Jy
! Component: 2200  -  total flux cleaned = 0.000158259 Jy
! Component: 2250  -  total flux cleaned = 0.000158605 Jy
! Component: 2300  -  total flux cleaned = 0.000158571 Jy
! Component: 2350  -  total flux cleaned = 0.000136903 Jy
! Component: 2400  -  total flux cleaned = 0.000158661 Jy
! Component: 2450  -  total flux cleaned = 0.000115613 Jy
! Component: 2500  -  total flux cleaned = 9.41158e-05 Jy
! Component: 2550  -  total flux cleaned = 0.000136727 Jy
! Component: 2600  -  total flux cleaned = 0.000199637 Jy
! Component: 2650  -  total flux cleaned = 0.000178587 Jy
! Component: 2700  -  total flux cleaned = 0.000137464 Jy
! Component: 2750  -  total flux cleaned = 0.000178616 Jy
! Component: 2800  -  total flux cleaned = 0.000239327 Jy
! Component: 2850  -  total flux cleaned = 0.000219232 Jy
! Component: 2900  -  total flux cleaned = 0.000219134 Jy
! Component: 2950  -  total flux cleaned = 0.000318169 Jy
! Component: 3000  -  total flux cleaned = 0.000376998 Jy
! Component: 3050  -  total flux cleaned = 0.000357833 Jy
! Component: 3100  -  total flux cleaned = 0.000357768 Jy
! Component: 3150  -  total flux cleaned = 0.000396176 Jy
! Component: 3200  -  total flux cleaned = 0.000472521 Jy
! Component: 3250  -  total flux cleaned = 0.000548074 Jy
! Component: 3300  -  total flux cleaned = 0.000529238 Jy
! Component: 3350  -  total flux cleaned = 0.000603534 Jy
! Component: 3400  -  total flux cleaned = 0.000640249 Jy
! Component: 3450  -  total flux cleaned = 0.00060372 Jy
! Component: 3500  -  total flux cleaned = 0.000712906 Jy
! Component: 3550  -  total flux cleaned = 0.000731042 Jy
! Component: 3600  -  total flux cleaned = 0.000856548 Jy
! Component: 3650  -  total flux cleaned = 0.000856662 Jy
! Component: 3700  -  total flux cleaned = 0.000891968 Jy
! Component: 3750  -  total flux cleaned = 0.000909656 Jy
! Component: 3800  -  total flux cleaned = 0.000944837 Jy
! Component: 3850  -  total flux cleaned = 0.000927426 Jy
! Component: 3900  -  total flux cleaned = 0.000892898 Jy
! Component: 3950  -  total flux cleaned = 0.000858823 Jy
! Component: 4000  -  total flux cleaned = 0.000841809 Jy
! Component: 4050  -  total flux cleaned = 0.000858771 Jy
! Total flux subtracted in 4096 components = 0.000892416 Jy
! Clean residual min=-0.000946 max=0.000983 Jy/beam
! Clean residual mean=0.000001 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.427896 Jy
keep
! Adding 272 model components to the UV plane model.
! The established model now contains 388 components and 0.427896 Jy
![Exited script file: muppet]
wmap "J0239-0234_S_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.291 x 10.95 at 18.14 degrees (North through East)
! Clean map  min=-0.0022086  max=0.39622 Jy/beam
! Writing clean map to FITS file: J0239-0234_S_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.396216 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000318954 
device "J0239-0234_S_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J0239-0234_S_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.2415 0.2415 0.483001 0.966001 1.932 3.86401 7.72801 15.456 30.912 61.8241
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0009 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.396 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.291 x 10.95 at 18.14 degrees (North through East)
! Clean map  min=-0.0022086  max=0.39622 Jy/beam
quit
! Quitting program
! Log file J0239-0234_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:12:34 2016