! Started logfile: J0123+2615_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:11:42 2016 obs J0123+2615_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0123+2615_S_2014_08_05_pus_uva.fits ! AN table 1: 74 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.745646 visibilities/baseline/integration-bin. ! Found source: J0123+2615 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 9932 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0123+2615_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.889431Jy sigma=0.010659 ! Fit after self-cal, rms=0.880996Jy sigma=0.010573 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.689 mas, bmaj=7.312 mas, bpa=17.16 degrees ! Estimated noise=940.499 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0886761 Jy ! Component: 100 - total flux cleaned = 0.110629 Jy ! Total flux subtracted in 100 components = 0.110629 Jy ! Clean residual min=-0.005313 max=0.008418 Jy/beam ! Clean residual mean=-0.000009 rms=0.001468 Jy/beam ! Combined flux in latest and established models = 0.110629 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.110629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091506Jy sigma=0.000806 ! Fit after self-cal, rms=0.091505Jy sigma=0.000806 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.443 mas, bmaj=8.087 mas, bpa=14.38 degrees ! Estimated noise=615.688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00927039 Jy ! Component: 100 - total flux cleaned = 0.0137414 Jy ! Component: 150 - total flux cleaned = 0.0164976 Jy ! Component: 200 - total flux cleaned = 0.0183224 Jy ! Total flux subtracted in 200 components = 0.0183224 Jy ! Clean residual min=-0.005237 max=0.003814 Jy/beam ! Clean residual mean=0.000002 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.128951 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 33 components and 0.128951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089670Jy sigma=0.000799 ! Fit after self-cal, rms=0.089671Jy sigma=0.000799 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.76 HN 0.98 KP 1.06 ! LA 1.11 MK 1.00* NL 0.99 OV 1.02 ! PT 1.06 SC 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.91 HN 1.05 KP 1.02 ! LA 1.10 MK 1.00* NL 1.05 OV 1.02 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.11 HN 1.01 KP 0.95 ! LA 0.86 MK 1.00* NL 1.03 OV 1.00 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.94 HN 0.99 KP 0.88 ! LA 0.80 MK 1.00* NL 1.12 OV 0.99 ! PT 1.07 SC 0.98 ! ! ! Fit before self-cal, rms=0.089671Jy sigma=0.000799 ! Fit after self-cal, rms=0.083087Jy sigma=0.000784 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.435 mas, bmaj=8.093 mas, bpa=14.28 degrees ! Estimated noise=622.735 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017193 Jy ! Component: 100 - total flux cleaned = 0.00192998 Jy ! Component: 150 - total flux cleaned = 0.00217136 Jy ! Component: 200 - total flux cleaned = 0.00233209 Jy ! Total flux subtracted in 200 components = 0.00233209 Jy ! Clean residual min=-0.004247 max=0.003449 Jy/beam ! Clean residual mean=0.000006 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.131283 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 42 components and 0.131283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082931Jy sigma=0.000784 ! Fit after self-cal, rms=0.082886Jy sigma=0.000784 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082886Jy sigma=0.000784 ! Fit after self-cal, rms=0.070804Jy sigma=0.000768 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.452 mas, bmaj=8.096 mas, bpa=14.57 degrees ! Estimated noise=622.278 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00058245 Jy ! Component: 100 - total flux cleaned = -0.00080129 Jy ! Component: 150 - total flux cleaned = -0.000868044 Jy ! Component: 200 - total flux cleaned = -0.000921041 Jy ! Total flux subtracted in 200 components = -0.000921041 Jy ! Clean residual min=-0.001647 max=0.002029 Jy/beam ! Clean residual mean=0.000002 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.130362 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.130362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070790Jy sigma=0.000768 ! Fit after self-cal, rms=0.070716Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, 10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197114 Jy ! Component: 100 - total flux cleaned = 0.00279178 Jy ! Component: 150 - total flux cleaned = 0.00295544 Jy ! Component: 200 - total flux cleaned = 0.00309903 Jy ! Total flux subtracted in 200 components = 0.00309903 Jy ! Clean residual min=-0.001605 max=0.001872 Jy/beam ! Clean residual mean=0.000001 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.133461 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 76 components and 0.133461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070663Jy sigma=0.000767 ! Fit after self-cal, rms=0.070658Jy sigma=0.000767 ! Inverting map ! Added new window around map position (108.5, -14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115501 Jy ! Component: 100 - total flux cleaned = 0.00152521 Jy ! Component: 150 - total flux cleaned = 0.00172671 Jy ! Component: 200 - total flux cleaned = 0.00187661 Jy ! Total flux subtracted in 200 components = 0.00187661 Jy ! Clean residual min=-0.001397 max=0.001520 Jy/beam ! Clean residual mean=0.000002 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.135338 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 92 components and 0.135338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070613Jy sigma=0.000766 ! Fit after self-cal, rms=0.070608Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070608Jy sigma=0.000766 ! Fit after self-cal, rms=0.070362Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.443 mas, bmaj=8.098 mas, bpa=14.75 degrees ! Estimated noise=620.392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000511537 Jy ! Component: 100 - total flux cleaned = 0.000616917 Jy ! Component: 150 - total flux cleaned = 0.000661537 Jy ! Component: 200 - total flux cleaned = 0.000744581 Jy ! Total flux subtracted in 200 components = 0.000744581 Jy ! Clean residual min=-0.001351 max=0.001510 Jy/beam ! Clean residual mean=0.000002 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.136082 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 104 components and 0.136082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070346Jy sigma=0.000766 ! Fit after self-cal, rms=0.070346Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190339 Jy ! Component: 100 - total flux cleaned = 0.000245861 Jy ! Component: 150 - total flux cleaned = 0.000315433 Jy ! Component: 200 - total flux cleaned = 0.000331922 Jy ! Total flux subtracted in 200 components = 0.000331922 Jy ! Clean residual min=-0.001351 max=0.001515 Jy/beam ! Clean residual mean=0.000002 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.136414 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 114 components and 0.136414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070337Jy sigma=0.000766 ! Fit after self-cal, rms=0.070337Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070337Jy sigma=0.000766 ! Fit after self-cal, rms=0.070287Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.974 mas, bmaj=10.04 mas, bpa=-0.9437 degrees ! Estimated noise=709.203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245502 Jy ! Component: 100 - total flux cleaned = 0.00045441 Jy ! Component: 150 - total flux cleaned = 0.000611969 Jy ! Component: 200 - total flux cleaned = 0.000667192 Jy ! Total flux subtracted in 200 components = 0.000667192 Jy ! Clean residual min=-0.001244 max=0.001286 Jy/beam ! Clean residual mean=0.000002 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.137081 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 136 components and 0.137081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070284Jy sigma=0.000766 ! Fit after self-cal, rms=0.070283Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000162987 Jy ! Component: 100 - total flux cleaned = 0.000234512 Jy ! Component: 150 - total flux cleaned = 0.000245501 Jy ! Component: 200 - total flux cleaned = 0.00026529 Jy ! Total flux subtracted in 200 components = 0.00026529 Jy ! Clean residual min=-0.001287 max=0.001275 Jy/beam ! Clean residual mean=0.000002 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.137347 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 151 components and 0.137347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070282Jy sigma=0.000766 ! Fit after self-cal, rms=0.070282Jy sigma=0.000766 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.441 mas, bmaj=8.102 mas, bpa=14.82 degrees ! Estimated noise=619.784 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.441 x 8.102 at 14.82 degrees (North through East) ! Clean map min=-0.0013766 max=0.11645 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.689 mas, bmaj=7.3 mas, bpa=17.41 degrees ! Estimated noise=947.282 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0892324 Jy ! Component: 100 - total flux cleaned = 0.111798 Jy ! Component: 150 - total flux cleaned = 0.120288 Jy ! Component: 200 - total flux cleaned = 0.124036 Jy ! Total flux subtracted in 200 components = 0.124036 Jy ! Clean residual min=-0.002816 max=0.002812 Jy/beam ! Clean residual mean=-0.000001 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.124036 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.124036 Jy ! Inverting map and beam ! Estimated beam: bmin=4.441 mas, bmaj=8.102 mas, bpa=14.82 degrees ! Estimated noise=619.784 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307324 Jy ! Component: 100 - total flux cleaned = 0.00525427 Jy ! Component: 150 - total flux cleaned = 0.0066847 Jy ! Component: 200 - total flux cleaned = 0.00767208 Jy ! Total flux subtracted in 200 components = 0.00767208 Jy ! Clean residual min=-0.001441 max=0.001503 Jy/beam ! Clean residual mean=0.000002 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.131708 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 63 components and 0.131708 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.974 mas, bmaj=10.04 mas, bpa=-0.9437 degrees ! Estimated noise=709.203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147298 Jy ! Component: 100 - total flux cleaned = 0.00251994 Jy ! Component: 150 - total flux cleaned = 0.00313003 Jy ! Component: 200 - total flux cleaned = 0.00358971 Jy ! Total flux subtracted in 200 components = 0.00358971 Jy ! Clean residual min=-0.001255 max=0.001380 Jy/beam ! Clean residual mean=0.000002 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.135297 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000300078 Jy ! Component: 100 - total flux cleaned = 0.00054184 Jy ! Component: 150 - total flux cleaned = 0.000718163 Jy ! Component: 200 - total flux cleaned = 0.000808268 Jy ! Total flux subtracted in 200 components = 0.000808268 Jy ! Clean residual min=-0.001260 max=0.001289 Jy/beam ! Clean residual mean=0.000002 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.136106 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 108 components and 0.136106 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.441 mas, bmaj=8.102 mas, bpa=14.82 degrees ! Estimated noise=619.784 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.06015e-05 Jy ! Component: 100 - total flux cleaned = -6.98568e-05 Jy ! Component: 150 - total flux cleaned = -8.63211e-06 Jy ! Component: 200 - total flux cleaned = 0.00012622 Jy ! Total flux subtracted in 200 components = 0.00012622 Jy ! Clean residual min=-0.001335 max=0.001523 Jy/beam ! Clean residual mean=0.000001 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.136232 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 127 components and 0.136232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070284Jy sigma=0.000766 ! Fit after self-cal, rms=0.070282Jy sigma=0.000766 wmodel J0123+2615_S_2014_08_05_pus_map.mod ! Writing 127 model components to file: J0123+2615_S_2014_08_05_pus_map.mod wobs J0123+2615_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0123+2615_S_2014_08_05_pus_uvs.fits wwins J0123+2615_S_2014_08_05_pus_map.win ! wwins: Wrote 3 windows to J0123+2615_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000251797 Jy ! Component: 100 - total flux cleaned = 0.00032348 Jy ! Component: 150 - total flux cleaned = 0.000187236 Jy ! Component: 200 - total flux cleaned = 3.43109e-05 Jy ! Component: 250 - total flux cleaned = -7.1577e-05 Jy ! Component: 300 - total flux cleaned = -0.000215784 Jy ! Component: 350 - total flux cleaned = -0.000335426 Jy ! Component: 400 - total flux cleaned = -0.000413097 Jy ! Component: 450 - total flux cleaned = -0.000508314 Jy ! Component: 500 - total flux cleaned = -0.000546027 Jy ! Component: 550 - total flux cleaned = -0.000673955 Jy ! Component: 600 - total flux cleaned = -0.000745421 Jy ! Component: 650 - total flux cleaned = -0.000798286 Jy ! Component: 700 - total flux cleaned = -0.000936468 Jy ! Component: 750 - total flux cleaned = -0.000970489 Jy ! Component: 800 - total flux cleaned = -0.00100388 Jy ! Component: 850 - total flux cleaned = -0.00102045 Jy ! Component: 900 - total flux cleaned = -0.00108544 Jy ! Component: 950 - total flux cleaned = -0.0011013 Jy ! Component: 1000 - total flux cleaned = -0.00114846 Jy ! Component: 1050 - total flux cleaned = -0.00116396 Jy ! Component: 1100 - total flux cleaned = -0.00125541 Jy ! Component: 1150 - total flux cleaned = -0.0012105 Jy ! Component: 1200 - total flux cleaned = -0.00122571 Jy ! Component: 1250 - total flux cleaned = -0.00128451 Jy ! Component: 1300 - total flux cleaned = -0.00128458 Jy ! Component: 1350 - total flux cleaned = -0.0013132 Jy ! Component: 1400 - total flux cleaned = -0.00127075 Jy ! Component: 1450 - total flux cleaned = -0.00125678 Jy ! Component: 1500 - total flux cleaned = -0.00125679 Jy ! Component: 1550 - total flux cleaned = -0.00127058 Jy ! Component: 1600 - total flux cleaned = -0.00124362 Jy ! Component: 1650 - total flux cleaned = -0.00127037 Jy ! Component: 1700 - total flux cleaned = -0.00124389 Jy ! Component: 1750 - total flux cleaned = -0.00121758 Jy ! Component: 1800 - total flux cleaned = -0.00123068 Jy ! Component: 1850 - total flux cleaned = -0.00120477 Jy ! Component: 1900 - total flux cleaned = -0.00120465 Jy ! Component: 1950 - total flux cleaned = -0.00114161 Jy ! Component: 2000 - total flux cleaned = -0.00106684 Jy ! Component: 2050 - total flux cleaned = -0.00106694 Jy ! Component: 2100 - total flux cleaned = -0.00102993 Jy ! Component: 2150 - total flux cleaned = -0.000945116 Jy ! Component: 2200 - total flux cleaned = -0.000885043 Jy ! Component: 2250 - total flux cleaned = -0.000908913 Jy ! Component: 2300 - total flux cleaned = -0.000885111 Jy ! Component: 2350 - total flux cleaned = -0.000849795 Jy ! Component: 2400 - total flux cleaned = -0.000826393 Jy ! Component: 2450 - total flux cleaned = -0.000791768 Jy ! Component: 2500 - total flux cleaned = -0.000734651 Jy ! Component: 2550 - total flux cleaned = -0.000734663 Jy ! Component: 2600 - total flux cleaned = -0.000723303 Jy ! Component: 2650 - total flux cleaned = -0.000678673 Jy ! Component: 2700 - total flux cleaned = -0.000590284 Jy ! Component: 2750 - total flux cleaned = -0.000612342 Jy ! Component: 2800 - total flux cleaned = -0.000612321 Jy ! Component: 2850 - total flux cleaned = -0.000569004 Jy ! Component: 2900 - total flux cleaned = -0.000558366 Jy ! Component: 2950 - total flux cleaned = -0.000558478 Jy ! Component: 3000 - total flux cleaned = -0.000537414 Jy ! Component: 3050 - total flux cleaned = -0.000495758 Jy ! Component: 3100 - total flux cleaned = -0.000526943 Jy ! Component: 3150 - total flux cleaned = -0.000537312 Jy ! Component: 3200 - total flux cleaned = -0.000547604 Jy ! Component: 3250 - total flux cleaned = -0.000557842 Jy ! Component: 3300 - total flux cleaned = -0.000577985 Jy ! Component: 3350 - total flux cleaned = -0.000548025 Jy ! Component: 3400 - total flux cleaned = -0.000557956 Jy ! Component: 3450 - total flux cleaned = -0.000577648 Jy ! Component: 3500 - total flux cleaned = -0.000577673 Jy ! Component: 3550 - total flux cleaned = -0.000606945 Jy ! Component: 3600 - total flux cleaned = -0.000568181 Jy ! Component: 3650 - total flux cleaned = -0.000597096 Jy ! Component: 3700 - total flux cleaned = -0.000587485 Jy ! Component: 3750 - total flux cleaned = -0.000625359 Jy ! Component: 3800 - total flux cleaned = -0.00058756 Jy ! Component: 3850 - total flux cleaned = -0.000587579 Jy ! Component: 3900 - total flux cleaned = -0.000606267 Jy ! Component: 3950 - total flux cleaned = -0.000615486 Jy ! Component: 4000 - total flux cleaned = -0.000597142 Jy ! Component: 4050 - total flux cleaned = -0.000597185 Jy ! Total flux subtracted in 4096 components = -0.000588063 Jy ! Clean residual min=-0.000500 max=0.000589 Jy/beam ! Clean residual mean=0.000001 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.135644 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 409 components and 0.135644 Jy ![Exited script file: muppet] wmap "J0123+2615_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.441 x 8.102 at 14.82 degrees (North through East) ! Clean map min=-0.0011249 max=0.11655 Jy/beam ! Writing clean map to FITS file: J0123+2615_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116549 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00016783 device "J0123+2615_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0123+2615_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.431998 0.431998 0.863997 1.72799 3.45599 6.91197 13.8239 27.6479 55.2958 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.441 x 8.102 at 14.82 degrees (North through East) ! Clean map min=-0.0011249 max=0.11655 Jy/beam quit ! Quitting program ! Log file J0123+2615_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:11:47 2016