! Started logfile: J0038+1227_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:10:36 2016 obs J0038+1227_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0038+1227_S_2014_08_05_pus_uva.fits ! AN table 1: 124 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.77043 visibilities/baseline/integration-bin. ! Found source: J0038+1227 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 17196 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0038+1227_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.885058Jy sigma=0.009824 ! Fit after self-cal, rms=0.856461Jy sigma=0.009571 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.742 mas, bmaj=8.334 mas, bpa=18.49 degrees ! Estimated noise=913.435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109144 Jy ! Component: 100 - total flux cleaned = 0.137413 Jy ! Total flux subtracted in 100 components = 0.137413 Jy ! Clean residual min=-0.008023 max=0.017032 Jy/beam ! Clean residual mean=-0.000083 rms=0.002473 Jy/beam ! Combined flux in latest and established models = 0.137413 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.137413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091013Jy sigma=0.000936 ! Fit after self-cal, rms=0.090972Jy sigma=0.000936 ! Inverting map ! Added new window around map position (-6.5, 11.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172528 Jy ! Component: 100 - total flux cleaned = 0.0288002 Jy ! Total flux subtracted in 100 components = 0.0288002 Jy ! Clean residual min=-0.006366 max=0.012492 Jy/beam ! Clean residual mean=-0.000055 rms=0.001901 Jy/beam ! Combined flux in latest and established models = 0.166213 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 22 components and 0.166213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086422Jy sigma=0.000880 ! Fit after self-cal, rms=0.086205Jy sigma=0.000877 ! Inverting map ! Added new window around map position (-12, 20). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118442 Jy ! Component: 100 - total flux cleaned = 0.0196885 Jy ! Total flux subtracted in 100 components = 0.0196885 Jy ! Clean residual min=-0.005540 max=0.008639 Jy/beam ! Clean residual mean=-0.000038 rms=0.001538 Jy/beam ! Combined flux in latest and established models = 0.185902 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 0.185902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083972Jy sigma=0.000850 ! Fit after self-cal, rms=0.083911Jy sigma=0.000850 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.534 mas, bmaj=9.324 mas, bpa=17.7 degrees ! Estimated noise=492.844 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18.5, 32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124977 Jy ! Component: 100 - total flux cleaned = 0.0214081 Jy ! Component: 150 - total flux cleaned = 0.0288117 Jy ! Component: 200 - total flux cleaned = 0.0351455 Jy ! Total flux subtracted in 200 components = 0.0351455 Jy ! Clean residual min=-0.004150 max=0.005358 Jy/beam ! Clean residual mean=-0.000041 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.221047 Jy ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 106 components and 0.221047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081255Jy sigma=0.000816 ! Fit after self-cal, rms=0.081089Jy sigma=0.000815 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.87 HN 0.99 KP 1.02 ! LA 1.08 MK 1.00* NL 0.97 OV 0.98 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.06 HN 1.05 KP 0.98 ! LA 1.01 MK 1.00* NL 1.01 OV 1.01 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.17 HN 1.03 KP 0.87 ! LA 0.80 MK 1.00* NL 1.02 OV 0.97 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.04 HN 1.01 KP 0.85 ! LA 0.77 MK 1.00* NL 1.10 OV 1.00 ! PT 0.97 SC 1.02 ! ! ! Fit before self-cal, rms=0.081089Jy sigma=0.000815 ! Fit after self-cal, rms=0.075397Jy sigma=0.000788 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.587 mas, bmaj=9.413 mas, bpa=17.42 degrees ! Estimated noise=480.312 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00454041 Jy ! Component: 100 - total flux cleaned = 0.00782702 Jy ! Component: 150 - total flux cleaned = 0.0104231 Jy ! Component: 200 - total flux cleaned = 0.0121261 Jy ! Total flux subtracted in 200 components = 0.0121261 Jy ! Clean residual min=-0.002551 max=0.003471 Jy/beam ! Clean residual mean=0.000007 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.233173 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 143 components and 0.233173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075059Jy sigma=0.000783 ! Fit after self-cal, rms=0.075054Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075054Jy sigma=0.000782 ! Fit after self-cal, rms=0.074419Jy sigma=0.000781 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.586 mas, bmaj=9.411 mas, bpa=17.42 degrees ! Estimated noise=479.749 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203027 Jy ! Component: 100 - total flux cleaned = 0.00306215 Jy ! Component: 150 - total flux cleaned = 0.00361821 Jy ! Component: 200 - total flux cleaned = 0.00406277 Jy ! Total flux subtracted in 200 components = 0.00406277 Jy ! Clean residual min=-0.002093 max=0.003140 Jy/beam ! Clean residual mean=-0.000002 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.237236 Jy selfcal ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 185 components and 0.237236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074332Jy sigma=0.000780 ! Fit after self-cal, rms=0.074312Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279934 Jy ! Component: 100 - total flux cleaned = 0.00426398 Jy ! Component: 150 - total flux cleaned = 0.00520206 Jy ! Component: 200 - total flux cleaned = 0.00588577 Jy ! Total flux subtracted in 200 components = 0.00588577 Jy ! Clean residual min=-0.002014 max=0.001980 Jy/beam ! Clean residual mean=0.000000 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.243122 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 226 components and 0.243122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074210Jy sigma=0.000778 ! Fit after self-cal, rms=0.074202Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074202Jy sigma=0.000778 ! Fit after self-cal, rms=0.074085Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.589 mas, bmaj=9.405 mas, bpa=17.37 degrees ! Estimated noise=479.279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000941973 Jy ! Component: 100 - total flux cleaned = 0.00154557 Jy ! Component: 150 - total flux cleaned = 0.00195971 Jy ! Component: 200 - total flux cleaned = 0.00231106 Jy ! Total flux subtracted in 200 components = 0.00231106 Jy ! Clean residual min=-0.001925 max=0.001963 Jy/beam ! Clean residual mean=0.000003 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.245433 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 253 components and 0.245433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074059Jy sigma=0.000778 ! Fit after self-cal, rms=0.074054Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291281 Jy ! Component: 100 - total flux cleaned = 0.000514626 Jy ! Component: 150 - total flux cleaned = 0.000799262 Jy ! Component: 200 - total flux cleaned = 0.0010393 Jy ! Total flux subtracted in 200 components = 0.0010393 Jy ! Clean residual min=-0.001873 max=0.001879 Jy/beam ! Clean residual mean=0.000003 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.246472 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 270 components and 0.246472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074038Jy sigma=0.000777 ! Fit after self-cal, rms=0.074035Jy sigma=0.000777 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074035Jy sigma=0.000777 ! Fit after self-cal, rms=0.074014Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.334 mas, bmaj=11.08 mas, bpa=8.851 degrees ! Estimated noise=532.799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000691023 Jy ! Component: 100 - total flux cleaned = 0.00132786 Jy ! Component: 150 - total flux cleaned = 0.00183396 Jy ! Component: 200 - total flux cleaned = 0.00222028 Jy ! Total flux subtracted in 200 components = 0.00222028 Jy ! Clean residual min=-0.002168 max=0.002295 Jy/beam ! Clean residual mean=0.000005 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.248693 Jy selfcal ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 313 components and 0.248693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074004Jy sigma=0.000777 ! Fit after self-cal, rms=0.073999Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141273 Jy ! Component: 100 - total flux cleaned = 0.000447863 Jy ! Component: 150 - total flux cleaned = 0.000701544 Jy ! Component: 200 - total flux cleaned = 0.000932896 Jy ! Total flux subtracted in 200 components = 0.000932896 Jy ! Clean residual min=-0.002106 max=0.002250 Jy/beam ! Clean residual mean=0.000006 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.249625 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 336 components and 0.249625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073992Jy sigma=0.000777 ! Fit after self-cal, rms=0.073990Jy sigma=0.000777 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.592 mas, bmaj=9.405 mas, bpa=17.36 degrees ! Estimated noise=479.385 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.592 x 9.405 at 17.36 degrees (North through East) ! Clean map min=-0.0017218 max=0.14008 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.78 mas, bmaj=8.364 mas, bpa=17.98 degrees ! Estimated noise=896.037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106792 Jy ! Component: 100 - total flux cleaned = 0.135316 Jy ! Component: 150 - total flux cleaned = 0.152688 Jy ! Component: 200 - total flux cleaned = 0.165374 Jy ! Total flux subtracted in 200 components = 0.165374 Jy ! Clean residual min=-0.005310 max=0.007323 Jy/beam ! Clean residual mean=-0.000039 rms=0.001610 Jy/beam ! Combined flux in latest and established models = 0.165374 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.165374 Jy ! Inverting map and beam ! Estimated beam: bmin=4.592 mas, bmaj=9.405 mas, bpa=17.36 degrees ! Estimated noise=479.385 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137753 Jy ! Component: 100 - total flux cleaned = 0.0243293 Jy ! Component: 150 - total flux cleaned = 0.0327791 Jy ! Component: 200 - total flux cleaned = 0.0396846 Jy ! Total flux subtracted in 200 components = 0.0396846 Jy ! Clean residual min=-0.003388 max=0.004205 Jy/beam ! Clean residual mean=-0.000033 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.205059 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 99 components and 0.205059 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.334 mas, bmaj=11.08 mas, bpa=8.851 degrees ! Estimated noise=532.799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00874162 Jy ! Component: 100 - total flux cleaned = 0.015495 Jy ! Component: 150 - total flux cleaned = 0.0208518 Jy ! Component: 200 - total flux cleaned = 0.0251856 Jy ! Total flux subtracted in 200 components = 0.0251856 Jy ! Clean residual min=-0.003132 max=0.003346 Jy/beam ! Clean residual mean=-0.000018 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.230244 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353676 Jy ! Component: 100 - total flux cleaned = 0.0064402 Jy ! Component: 150 - total flux cleaned = 0.00884435 Jy ! Component: 200 - total flux cleaned = 0.0108499 Jy ! Total flux subtracted in 200 components = 0.0108499 Jy ! Clean residual min=-0.002596 max=0.002406 Jy/beam ! Clean residual mean=-0.000001 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.241094 Jy ! Adding 182 model components to the UV plane model. ! The established model now contains 258 components and 0.241094 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.592 mas, bmaj=9.405 mas, bpa=17.36 degrees ! Estimated noise=479.385 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157052 Jy ! Component: 100 - total flux cleaned = 0.00269416 Jy ! Component: 150 - total flux cleaned = 0.00354426 Jy ! Component: 200 - total flux cleaned = 0.00411821 Jy ! Total flux subtracted in 200 components = 0.00411821 Jy ! Clean residual min=-0.001845 max=0.001694 Jy/beam ! Clean residual mean=0.000002 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.245212 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 286 components and 0.245212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074041Jy sigma=0.000777 ! Fit after self-cal, rms=0.074033Jy sigma=0.000777 wmodel J0038+1227_S_2014_08_05_pus_map.mod ! Writing 286 model components to file: J0038+1227_S_2014_08_05_pus_map.mod wobs J0038+1227_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0038+1227_S_2014_08_05_pus_uvs.fits wwins J0038+1227_S_2014_08_05_pus_map.win ! wwins: Wrote 5 windows to J0038+1227_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.34007e-05 Jy ! Component: 100 - total flux cleaned = 0.000174192 Jy ! Component: 150 - total flux cleaned = 0.000202882 Jy ! Component: 200 - total flux cleaned = 0.000392603 Jy ! Component: 250 - total flux cleaned = 0.000548903 Jy ! Component: 300 - total flux cleaned = 0.000624639 Jy ! Component: 350 - total flux cleaned = 0.00062472 Jy ! Component: 400 - total flux cleaned = 0.000624955 Jy ! Component: 450 - total flux cleaned = 0.000625214 Jy ! Component: 500 - total flux cleaned = 0.000626099 Jy ! Component: 550 - total flux cleaned = 0.000713067 Jy ! Component: 600 - total flux cleaned = 0.000734108 Jy ! Component: 650 - total flux cleaned = 0.000837623 Jy ! Component: 700 - total flux cleaned = 0.000898244 Jy ! Component: 750 - total flux cleaned = 0.000937913 Jy ! Component: 800 - total flux cleaned = 0.000918789 Jy ! Component: 850 - total flux cleaned = 0.00090025 Jy ! Component: 900 - total flux cleaned = 0.000882079 Jy ! Component: 950 - total flux cleaned = 0.000845855 Jy ! Component: 1000 - total flux cleaned = 0.000845845 Jy ! Component: 1050 - total flux cleaned = 0.000793245 Jy ! Component: 1100 - total flux cleaned = 0.000707811 Jy ! Component: 1150 - total flux cleaned = 0.000623691 Jy ! Component: 1200 - total flux cleaned = 0.000508193 Jy ! Component: 1250 - total flux cleaned = 0.000378399 Jy ! Component: 1300 - total flux cleaned = 0.000298455 Jy ! Component: 1350 - total flux cleaned = 0.000140923 Jy ! Component: 1400 - total flux cleaned = 1.72403e-05 Jy ! Component: 1450 - total flux cleaned = -5.93542e-05 Jy ! Component: 1500 - total flux cleaned = -0.000239679 Jy ! Component: 1550 - total flux cleaned = -0.000328207 Jy ! Component: 1600 - total flux cleaned = -0.000430606 Jy ! Component: 1650 - total flux cleaned = -0.000574662 Jy ! Component: 1700 - total flux cleaned = -0.000744976 Jy ! Component: 1750 - total flux cleaned = -0.000856605 Jy ! Component: 1800 - total flux cleaned = -0.000966894 Jy ! Component: 1850 - total flux cleaned = -0.00108962 Jy ! Component: 1900 - total flux cleaned = -0.00122388 Jy ! Component: 1950 - total flux cleaned = -0.00138264 Jy ! Component: 2000 - total flux cleaned = -0.00147383 Jy ! Component: 2050 - total flux cleaned = -0.00155123 Jy ! Component: 2100 - total flux cleaned = -0.00162757 Jy ! Component: 2150 - total flux cleaned = -0.00170321 Jy ! Component: 2200 - total flux cleaned = -0.00177784 Jy ! Component: 2250 - total flux cleaned = -0.00187647 Jy ! Component: 2300 - total flux cleaned = -0.00198606 Jy ! Component: 2350 - total flux cleaned = -0.00207001 Jy ! Component: 2400 - total flux cleaned = -0.00217677 Jy ! Component: 2450 - total flux cleaned = -0.00227072 Jy ! Component: 2500 - total flux cleaned = -0.0023403 Jy ! Component: 2550 - total flux cleaned = -0.00243218 Jy ! Component: 2600 - total flux cleaned = -0.00245485 Jy ! Component: 2650 - total flux cleaned = -0.00257855 Jy ! Component: 2700 - total flux cleaned = -0.00260071 Jy ! Component: 2750 - total flux cleaned = -0.00266692 Jy ! Component: 2800 - total flux cleaned = -0.00271064 Jy ! Component: 2850 - total flux cleaned = -0.00274295 Jy ! Component: 2900 - total flux cleaned = -0.0027965 Jy ! Component: 2950 - total flux cleaned = -0.0028496 Jy ! Component: 3000 - total flux cleaned = -0.00288109 Jy ! Component: 3050 - total flux cleaned = -0.00292266 Jy ! Component: 3100 - total flux cleaned = -0.00296397 Jy ! Component: 3150 - total flux cleaned = -0.00299476 Jy ! Component: 3200 - total flux cleaned = -0.00304544 Jy ! Component: 3250 - total flux cleaned = -0.0030656 Jy ! Component: 3300 - total flux cleaned = -0.00309545 Jy ! Component: 3350 - total flux cleaned = -0.003145 Jy ! Component: 3400 - total flux cleaned = -0.00315476 Jy ! Component: 3450 - total flux cleaned = -0.0032034 Jy ! Component: 3500 - total flux cleaned = -0.00323232 Jy ! Component: 3550 - total flux cleaned = -0.00323236 Jy ! Component: 3600 - total flux cleaned = -0.00328934 Jy ! Component: 3650 - total flux cleaned = -0.00329858 Jy ! Component: 3700 - total flux cleaned = -0.00329854 Jy ! Component: 3750 - total flux cleaned = -0.00331693 Jy ! Component: 3800 - total flux cleaned = -0.00333535 Jy ! Component: 3850 - total flux cleaned = -0.00333524 Jy ! Component: 3900 - total flux cleaned = -0.00337169 Jy ! Component: 3950 - total flux cleaned = -0.00339866 Jy ! Component: 4000 - total flux cleaned = -0.00343451 Jy ! Component: 4050 - total flux cleaned = -0.00345221 Jy ! Total flux subtracted in 4096 components = -0.00345214 Jy ! Clean residual min=-0.000593 max=0.000557 Jy/beam ! Clean residual mean=-0.000002 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.24176 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 607 components and 0.24176 Jy ![Exited script file: muppet] wmap "J0038+1227_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.592 x 9.405 at 17.36 degrees (North through East) ! Clean map min=-0.0014587 max=0.13972 Jy/beam ! Writing clean map to FITS file: J0038+1227_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.13972 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00017342 device "J0038+1227_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0038+1227_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.372359 0.372359 0.744718 1.48944 2.97887 5.95774 11.9155 23.831 47.6619 95.3239 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.139 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.592 x 9.405 at 17.36 degrees (North through East) ! Clean map min=-0.0014587 max=0.13972 Jy/beam quit ! Quitting program ! Log file J0038+1227_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:10:43 2016