! Started logfile: J0010+1058_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:10:20 2016 obs J0010+1058_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J0010+1058_S_2014_08_05_pus_uva.fits ! AN table 1: 32 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.600694 visibilities/baseline/integration-bin. ! Found source: J0010+1058 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 3460 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0010+1058_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.909000Jy sigma=0.010538 ! Fit after self-cal, rms=0.896105Jy sigma=0.010404 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.659 mas, bmaj=9.199 mas, bpa=18.95 degrees ! Estimated noise=1259.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0810542 Jy ! Component: 100 - total flux cleaned = 0.0991701 Jy ! Total flux subtracted in 100 components = 0.0991701 Jy ! Clean residual min=-0.004693 max=0.006204 Jy/beam ! Clean residual mean=-0.000016 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.0991701 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0991701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074009Jy sigma=0.000791 ! Fit after self-cal, rms=0.074011Jy sigma=0.000791 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.51 mas, bmaj=10.04 mas, bpa=17.58 degrees ! Estimated noise=1054.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00732265 Jy ! Component: 100 - total flux cleaned = 0.0101506 Jy ! Component: 150 - total flux cleaned = 0.0115413 Jy ! Component: 200 - total flux cleaned = 0.0119774 Jy ! Total flux subtracted in 200 components = 0.0119774 Jy ! Clean residual min=-0.003489 max=0.003433 Jy/beam ! Clean residual mean=0.000013 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.111148 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 43 components and 0.111148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073262Jy sigma=0.000784 ! Fit after self-cal, rms=0.073268Jy sigma=0.000784 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.86 HN 1.00 KP 1.11 ! LA 1.06 MK 1.00* NL 0.94 OV 0.97 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.06 HN 0.95 KP 1.00 ! LA 1.13 MK 1.00* NL 0.98 OV 1.04 ! PT 1.06 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.10 HN 1.08 KP 0.90 ! LA 0.88 MK 1.00* NL 1.06 OV 0.94 ! PT 1.04 SC 1.15 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.05 HN 1.00 KP 0.86 ! LA 0.85 MK 1.00* NL 1.07 OV 0.97 ! PT 1.02 SC 0.97 ! ! ! Fit before self-cal, rms=0.073268Jy sigma=0.000784 ! Fit after self-cal, rms=0.070972Jy sigma=0.000773 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.525 mas, bmaj=10.06 mas, bpa=17.51 degrees ! Estimated noise=1052.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000290986 Jy ! Component: 100 - total flux cleaned = -0.000319776 Jy ! Component: 150 - total flux cleaned = -0.00034552 Jy ! Component: 200 - total flux cleaned = -0.000345513 Jy ! Total flux subtracted in 200 components = -0.000345513 Jy ! Clean residual min=-0.003281 max=0.003273 Jy/beam ! Clean residual mean=0.000011 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 0.110802 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.110802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070966Jy sigma=0.000773 ! Fit after self-cal, rms=0.070965Jy sigma=0.000773 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070965Jy sigma=0.000773 ! Fit after self-cal, rms=0.070914Jy sigma=0.000770 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.529 mas, bmaj=10.08 mas, bpa=17.51 degrees ! Estimated noise=1051.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000147741 Jy ! Component: 100 - total flux cleaned = -0.000225865 Jy ! Component: 150 - total flux cleaned = -0.000248858 Jy ! Component: 200 - total flux cleaned = -0.000270769 Jy ! Total flux subtracted in 200 components = -0.000270769 Jy ! Clean residual min=-0.003279 max=0.003138 Jy/beam ! Clean residual mean=0.000003 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.110531 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 65 components and 0.110531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070908Jy sigma=0.000770 ! Fit after self-cal, rms=0.070923Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.60859e-05 Jy ! Component: 100 - total flux cleaned = -4.54866e-05 Jy ! Component: 150 - total flux cleaned = -4.53227e-05 Jy ! Component: 200 - total flux cleaned = -6.31255e-05 Jy ! Total flux subtracted in 200 components = -6.31255e-05 Jy ! Clean residual min=-0.003266 max=0.003139 Jy/beam ! Clean residual mean=0.000003 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.110468 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 74 components and 0.110468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070920Jy sigma=0.000770 ! Fit after self-cal, rms=0.070920Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070920Jy sigma=0.000770 ! Fit after self-cal, rms=0.070888Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.526 mas, bmaj=10.08 mas, bpa=17.54 degrees ! Estimated noise=1050.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144244 Jy ! Component: 100 - total flux cleaned = -0.000175548 Jy ! Component: 150 - total flux cleaned = -0.000195041 Jy ! Component: 200 - total flux cleaned = -0.000204656 Jy ! Total flux subtracted in 200 components = -0.000204656 Jy ! Clean residual min=-0.003263 max=0.003114 Jy/beam ! Clean residual mean=0.000003 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.110263 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 85 components and 0.110263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070884Jy sigma=0.000770 ! Fit after self-cal, rms=0.070885Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.03796e-05 Jy ! Component: 100 - total flux cleaned = -2.94696e-05 Jy ! Component: 150 - total flux cleaned = -3.89134e-05 Jy ! Component: 200 - total flux cleaned = -4.76321e-05 Jy ! Total flux subtracted in 200 components = -4.76321e-05 Jy ! Clean residual min=-0.003261 max=0.003121 Jy/beam ! Clean residual mean=0.000003 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.110216 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 87 components and 0.110216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070883Jy sigma=0.000770 ! Fit after self-cal, rms=0.070883Jy sigma=0.000770 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070883Jy sigma=0.000770 ! Fit after self-cal, rms=0.070856Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.953 mas, bmaj=12.28 mas, bpa=16.87 degrees ! Estimated noise=1180.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.0636e-06 Jy ! Component: 100 - total flux cleaned = -5.83131e-05 Jy ! Component: 150 - total flux cleaned = -8.98554e-05 Jy ! Component: 200 - total flux cleaned = -0.000109214 Jy ! Total flux subtracted in 200 components = -0.000109214 Jy ! Clean residual min=-0.003487 max=0.002815 Jy/beam ! Clean residual mean=0.000005 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.110107 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 94 components and 0.110107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070859Jy sigma=0.000770 ! Fit after self-cal, rms=0.070859Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.68716e-06 Jy ! Component: 100 - total flux cleaned = -1.77367e-05 Jy ! Component: 150 - total flux cleaned = -1.7528e-05 Jy ! Component: 200 - total flux cleaned = -1.73013e-05 Jy ! Total flux subtracted in 200 components = -1.73013e-05 Jy ! Clean residual min=-0.003482 max=0.002790 Jy/beam ! Clean residual mean=0.000005 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.110089 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 97 components and 0.110089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070861Jy sigma=0.000770 ! Fit after self-cal, rms=0.070862Jy sigma=0.000770 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.524 mas, bmaj=10.09 mas, bpa=17.58 degrees ! Estimated noise=1050.15 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.524 x 10.09 at 17.58 degrees (North through East) ! Clean map min=-0.0031752 max=0.10504 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.666 mas, bmaj=9.224 mas, bpa=18.88 degrees ! Estimated noise=1254.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0806208 Jy ! Component: 100 - total flux cleaned = 0.098706 Jy ! Component: 150 - total flux cleaned = 0.104967 Jy ! Component: 200 - total flux cleaned = 0.10772 Jy ! Total flux subtracted in 200 components = 0.10772 Jy ! Clean residual min=-0.003808 max=0.004117 Jy/beam ! Clean residual mean=-0.000004 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 0.10772 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.10772 Jy ! Inverting map and beam ! Estimated beam: bmin=4.524 mas, bmaj=10.09 mas, bpa=17.58 degrees ! Estimated noise=1050.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179486 Jy ! Component: 100 - total flux cleaned = 0.00220349 Jy ! Component: 150 - total flux cleaned = 0.00231624 Jy ! Component: 200 - total flux cleaned = 0.00237198 Jy ! Total flux subtracted in 200 components = 0.00237198 Jy ! Clean residual min=-0.003275 max=0.003099 Jy/beam ! Clean residual mean=0.000003 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.110092 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 51 components and 0.110092 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.953 mas, bmaj=12.28 mas, bpa=16.87 degrees ! Estimated noise=1180.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.81779e-05 Jy ! Component: 100 - total flux cleaned = 6.44569e-05 Jy ! Component: 150 - total flux cleaned = 6.4556e-05 Jy ! Component: 200 - total flux cleaned = 5.23314e-05 Jy ! Total flux subtracted in 200 components = 5.23314e-05 Jy ! Clean residual min=-0.003503 max=0.002815 Jy/beam ! Clean residual mean=0.000006 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.110144 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.84382e-07 Jy ! Component: 100 - total flux cleaned = 9.36298e-07 Jy ! Component: 150 - total flux cleaned = 1.19356e-06 Jy ! Component: 200 - total flux cleaned = 1.05774e-05 Jy ! Total flux subtracted in 200 components = 1.05774e-05 Jy ! Clean residual min=-0.003503 max=0.002791 Jy/beam ! Clean residual mean=0.000006 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.110155 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 66 components and 0.110155 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.524 mas, bmaj=10.09 mas, bpa=17.58 degrees ! Estimated noise=1050.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000189477 Jy ! Component: 100 - total flux cleaned = -0.000117471 Jy ! Component: 150 - total flux cleaned = -0.000129345 Jy ! Component: 200 - total flux cleaned = -0.000129672 Jy ! Total flux subtracted in 200 components = -0.000129672 Jy ! Clean residual min=-0.003227 max=0.003119 Jy/beam ! Clean residual mean=0.000003 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.110025 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 75 components and 0.110025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070864Jy sigma=0.000770 ! Fit after self-cal, rms=0.070864Jy sigma=0.000770 wmodel J0010+1058_S_2014_08_05_pus_map.mod ! Writing 75 model components to file: J0010+1058_S_2014_08_05_pus_map.mod wobs J0010+1058_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J0010+1058_S_2014_08_05_pus_uvs.fits wwins J0010+1058_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J0010+1058_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000750739 Jy ! Component: 100 - total flux cleaned = -0.00152096 Jy ! Component: 150 - total flux cleaned = -0.00209226 Jy ! Component: 200 - total flux cleaned = -0.00263152 Jy ! Component: 250 - total flux cleaned = -0.00314968 Jy ! Component: 300 - total flux cleaned = -0.00360608 Jy ! Component: 350 - total flux cleaned = -0.00380725 Jy ! Component: 400 - total flux cleaned = -0.00396329 Jy ! Component: 450 - total flux cleaned = -0.0040777 Jy ! Component: 500 - total flux cleaned = -0.00411479 Jy ! Component: 550 - total flux cleaned = -0.00400723 Jy ! Component: 600 - total flux cleaned = -0.00407816 Jy ! Component: 650 - total flux cleaned = -0.00400972 Jy ! Component: 700 - total flux cleaned = -0.00394172 Jy ! Component: 750 - total flux cleaned = -0.00381 Jy ! Component: 800 - total flux cleaned = -0.0037453 Jy ! Component: 850 - total flux cleaned = -0.00361815 Jy ! Component: 900 - total flux cleaned = -0.00355558 Jy ! Component: 950 - total flux cleaned = -0.00355497 Jy ! Component: 1000 - total flux cleaned = -0.00346452 Jy ! Component: 1050 - total flux cleaned = -0.00334634 Jy ! Component: 1100 - total flux cleaned = -0.00334649 Jy ! Component: 1150 - total flux cleaned = -0.00334659 Jy ! Component: 1200 - total flux cleaned = -0.00331847 Jy ! Component: 1250 - total flux cleaned = -0.00334623 Jy ! Component: 1300 - total flux cleaned = -0.00326462 Jy ! Component: 1350 - total flux cleaned = -0.00334533 Jy ! Component: 1400 - total flux cleaned = -0.00329186 Jy ! Component: 1450 - total flux cleaned = -0.00323915 Jy ! Component: 1500 - total flux cleaned = -0.0031359 Jy ! Component: 1550 - total flux cleaned = -0.00313576 Jy ! Component: 1600 - total flux cleaned = -0.00308542 Jy ! Component: 1650 - total flux cleaned = -0.00306011 Jy ! Component: 1700 - total flux cleaned = -0.00308434 Jy ! Component: 1750 - total flux cleaned = -0.00296343 Jy ! Component: 1800 - total flux cleaned = -0.00284417 Jy ! Component: 1850 - total flux cleaned = -0.0027739 Jy ! Component: 1900 - total flux cleaned = -0.00272766 Jy ! Component: 1950 - total flux cleaned = -0.0026359 Jy ! Component: 2000 - total flux cleaned = -0.00259066 Jy ! Component: 2050 - total flux cleaned = -0.00250113 Jy ! Component: 2100 - total flux cleaned = -0.00247897 Jy ! Component: 2150 - total flux cleaned = -0.00234714 Jy ! Component: 2200 - total flux cleaned = -0.00228173 Jy ! Component: 2250 - total flux cleaned = -0.00217433 Jy ! Component: 2300 - total flux cleaned = -0.00208899 Jy ! Component: 2350 - total flux cleaned = -0.00198359 Jy ! Component: 2400 - total flux cleaned = -0.00190001 Jy ! Component: 2450 - total flux cleaned = -0.00185864 Jy ! Component: 2500 - total flux cleaned = -0.00183808 Jy ! Component: 2550 - total flux cleaned = -0.00177725 Jy ! Component: 2600 - total flux cleaned = -0.00169678 Jy ! Component: 2650 - total flux cleaned = -0.00163715 Jy ! Component: 2700 - total flux cleaned = -0.00157819 Jy ! Component: 2750 - total flux cleaned = -0.00153906 Jy ! Component: 2800 - total flux cleaned = -0.00151942 Jy ! Component: 2850 - total flux cleaned = -0.00140476 Jy ! Component: 2900 - total flux cleaned = -0.00134812 Jy ! Component: 2950 - total flux cleaned = -0.00134822 Jy ! Component: 3000 - total flux cleaned = -0.00131084 Jy ! Component: 3050 - total flux cleaned = -0.0012738 Jy ! Component: 3100 - total flux cleaned = -0.00125536 Jy ! Component: 3150 - total flux cleaned = -0.00123715 Jy ! Component: 3200 - total flux cleaned = -0.0011832 Jy ! Component: 3250 - total flux cleaned = -0.00109392 Jy ! Component: 3300 - total flux cleaned = -0.00109382 Jy ! Component: 3350 - total flux cleaned = -0.00100584 Jy ! Component: 3400 - total flux cleaned = -0.000988067 Jy ! Component: 3450 - total flux cleaned = -0.000953467 Jy ! Component: 3500 - total flux cleaned = -0.000970749 Jy ! Component: 3550 - total flux cleaned = -0.000919598 Jy ! Component: 3600 - total flux cleaned = -0.000902729 Jy ! Component: 3650 - total flux cleaned = -0.000902795 Jy ! Component: 3700 - total flux cleaned = -0.000886102 Jy ! Component: 3750 - total flux cleaned = -0.00085298 Jy ! Component: 3800 - total flux cleaned = -0.000836528 Jy ! Component: 3850 - total flux cleaned = -0.000771217 Jy ! Component: 3900 - total flux cleaned = -0.000787356 Jy ! Component: 3950 - total flux cleaned = -0.000706774 Jy ! Component: 4000 - total flux cleaned = -0.000690858 Jy ! Component: 4050 - total flux cleaned = -0.00062743 Jy ! Total flux subtracted in 4096 components = -0.000595777 Jy ! Clean residual min=-0.000949 max=0.000956 Jy/beam ! Clean residual mean=0.000002 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.109429 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 359 components and 0.109429 Jy ![Exited script file: muppet] wmap "J0010+1058_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.524 x 10.09 at 17.58 degrees (North through East) ! Clean map min=-0.0021569 max=0.10475 Jy/beam ! Writing clean map to FITS file: J0010+1058_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.104749 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000283228 device "J0010+1058_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J0010+1058_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.811167 0.811167 1.62233 3.24467 6.48933 12.9787 25.9573 51.9147 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.104 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.524 x 10.09 at 17.58 degrees (North through East) ! Clean map min=-0.0021569 max=0.10475 Jy/beam quit ! Quitting program ! Log file J0010+1058_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:10:25 2016