! Started logfile: J2315-1800_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:41:25 2016 obs J2315-1800_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J2315-1800_S_2014_05_31_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.98051 visibilities/baseline/integration-bin. ! Found source: J2315-1800 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 21532 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2315-1800_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.994254Jy sigma=0.010327 ! Fit after self-cal, rms=0.956249Jy sigma=0.009953 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.445 mas, bmaj=6.462 mas, bpa=-3.375 degrees ! Estimated noise=793.504 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0351586 Jy ! Component: 100 - total flux cleaned = 0.043372 Jy ! Total flux subtracted in 100 components = 0.043372 Jy ! Clean residual min=-0.003403 max=0.004121 Jy/beam ! Clean residual mean=-0.000032 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.043372 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.043372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085529Jy sigma=0.000844 ! Fit after self-cal, rms=0.084455Jy sigma=0.000833 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=7.845 mas, bpa=-4.119 degrees ! Estimated noise=470.561 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00658346 Jy ! Component: 100 - total flux cleaned = 0.00975745 Jy ! Component: 150 - total flux cleaned = 0.011532 Jy ! Component: 200 - total flux cleaned = 0.0125809 Jy ! Total flux subtracted in 200 components = 0.0125809 Jy ! Clean residual min=-0.004969 max=0.006523 Jy/beam ! Clean residual mean=-0.000076 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 0.055953 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 33 components and 0.055953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083970Jy sigma=0.000828 ! Fit after self-cal, rms=0.083966Jy sigma=0.000828 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.78 HN 1.12 KP 1.24 ! LA 0.89 MK 0.97 NL 1.19 OV 1.25 ! PT 0.83 SC 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.82 HN 1.19 KP 1.24 ! LA 0.93 MK 1.14 NL 1.11 OV 1.17 ! PT 0.85 SC 1.07 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 1.13 KP 1.15 ! LA 0.77 MK 1.00 NL 1.06 OV 1.02 ! PT 0.83 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.84 HN 1.04 KP 1.13 ! LA 0.84 MK 1.05 NL 1.17 OV 0.97 ! PT 0.86 SC 0.99 ! ! ! Fit before self-cal, rms=0.083966Jy sigma=0.000828 ! Fit after self-cal, rms=0.086133Jy sigma=0.000823 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=7.945 mas, bpa=-3.706 degrees ! Estimated noise=474.624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.17028e-05 Jy ! Component: 100 - total flux cleaned = 4.3885e-05 Jy ! Component: 150 - total flux cleaned = 4.42457e-05 Jy ! Component: 200 - total flux cleaned = 4.38838e-05 Jy ! Total flux subtracted in 200 components = 4.38838e-05 Jy ! Clean residual min=-0.004815 max=0.007563 Jy/beam ! Clean residual mean=-0.000066 rms=0.001561 Jy/beam ! Combined flux in latest and established models = 0.0559969 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.0559969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086123Jy sigma=0.000823 ! Fit after self-cal, rms=0.086448Jy sigma=0.000822 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086448Jy sigma=0.000822 ! Fit after self-cal, rms=0.102257Jy sigma=0.000813 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=8.068 mas, bpa=-3.841 degrees ! Estimated noise=499.532 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132632 Jy ! Component: 100 - total flux cleaned = 0.00128726 Jy ! Component: 150 - total flux cleaned = 0.00114505 Jy ! Component: 200 - total flux cleaned = 0.00102253 Jy ! Total flux subtracted in 200 components = 0.00102253 Jy ! Clean residual min=-0.004468 max=0.007094 Jy/beam ! Clean residual mean=-0.000038 rms=0.001478 Jy/beam ! Combined flux in latest and established models = 0.0570194 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.0570194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102143Jy sigma=0.000813 ! Fit after self-cal, rms=0.103040Jy sigma=0.000811 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18.5, 24.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00581643 Jy ! Component: 100 - total flux cleaned = 0.00874114 Jy ! Component: 150 - total flux cleaned = 0.0106814 Jy ! Component: 200 - total flux cleaned = 0.0115725 Jy ! Total flux subtracted in 200 components = 0.0115725 Jy ! Clean residual min=-0.004300 max=0.004743 Jy/beam ! Clean residual mean=-0.000029 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 0.0685918 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 65 components and 0.0685919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102750Jy sigma=0.000805 ! Fit after self-cal, rms=0.102410Jy sigma=0.000803 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102410Jy sigma=0.000803 ! Fit after self-cal, rms=0.107092Jy sigma=0.000802 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=8.118 mas, bpa=-3.472 degrees ! Estimated noise=502.181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035159 Jy ! Component: 100 - total flux cleaned = 0.00506182 Jy ! Component: 150 - total flux cleaned = 0.00545291 Jy ! Component: 200 - total flux cleaned = 0.00578378 Jy ! Total flux subtracted in 200 components = 0.00578378 Jy ! Clean residual min=-0.004088 max=0.005076 Jy/beam ! Clean residual mean=-0.000018 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 0.0743756 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 81 components and 0.0743756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106986Jy sigma=0.000799 ! Fit after self-cal, rms=0.107128Jy sigma=0.000798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147468 Jy ! Component: 100 - total flux cleaned = 0.00169477 Jy ! Component: 150 - total flux cleaned = 0.00173492 Jy ! Component: 200 - total flux cleaned = 0.00176706 Jy ! Total flux subtracted in 200 components = 0.00176706 Jy ! Clean residual min=-0.003971 max=0.005248 Jy/beam ! Clean residual mean=-0.000014 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.0761427 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 92 components and 0.0761427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107083Jy sigma=0.000798 ! Fit after self-cal, rms=0.107000Jy sigma=0.000798 ! Inverting map ! Added new window around map position (55, 29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475992 Jy ! Component: 100 - total flux cleaned = 0.00714624 Jy ! Component: 150 - total flux cleaned = 0.00867687 Jy ! Component: 200 - total flux cleaned = 0.00971168 Jy ! Total flux subtracted in 200 components = 0.00971168 Jy ! Clean residual min=-0.004141 max=0.004435 Jy/beam ! Clean residual mean=-0.000018 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.0858544 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 114 components and 0.0858544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106762Jy sigma=0.000795 ! Fit after self-cal, rms=0.106609Jy sigma=0.000794 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106609Jy sigma=0.000794 ! Fit after self-cal, rms=0.106392Jy sigma=0.000793 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.239 mas, bmaj=17.28 mas, bpa=2.852 degrees ! Estimated noise=570.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385299 Jy ! Component: 100 - total flux cleaned = 0.00627644 Jy ! Component: 150 - total flux cleaned = 0.00797707 Jy ! Component: 200 - total flux cleaned = 0.00873891 Jy ! Total flux subtracted in 200 components = 0.00873891 Jy ! Clean residual min=-0.006710 max=0.006003 Jy/beam ! Clean residual mean=-0.000034 rms=0.001755 Jy/beam ! Combined flux in latest and established models = 0.0945933 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 138 components and 0.0945933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106311Jy sigma=0.000792 ! Fit after self-cal, rms=0.106301Jy sigma=0.000791 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253148 Jy ! Component: 100 - total flux cleaned = 0.00429543 Jy ! Component: 150 - total flux cleaned = 0.00531555 Jy ! Component: 200 - total flux cleaned = 0.00588327 Jy ! Total flux subtracted in 200 components = 0.00588327 Jy ! Clean residual min=-0.006515 max=0.005985 Jy/beam ! Clean residual mean=-0.000026 rms=0.001735 Jy/beam ! Combined flux in latest and established models = 0.100477 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 152 components and 0.100477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106268Jy sigma=0.000791 ! Fit after self-cal, rms=0.106235Jy sigma=0.000790 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=8.152 mas, bpa=-2.92 degrees ! Estimated noise=494.64 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.246 x 8.152 at -2.92 degrees (North through East) ! Clean map min=-0.0037536 max=0.050865 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.546 mas, bmaj=6.618 mas, bpa=-2.149 degrees ! Estimated noise=872.919 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0385651 Jy ! Component: 100 - total flux cleaned = 0.0505478 Jy ! Component: 150 - total flux cleaned = 0.057623 Jy ! Component: 200 - total flux cleaned = 0.0631903 Jy ! Total flux subtracted in 200 components = 0.0631903 Jy ! Clean residual min=-0.003777 max=0.004869 Jy/beam ! Clean residual mean=-0.000017 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.0631903 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0631903 Jy ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=8.152 mas, bpa=-2.92 degrees ! Estimated noise=494.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00646485 Jy ! Component: 100 - total flux cleaned = 0.0114559 Jy ! Component: 150 - total flux cleaned = 0.0155801 Jy ! Component: 200 - total flux cleaned = 0.0190814 Jy ! Total flux subtracted in 200 components = 0.0190814 Jy ! Clean residual min=-0.003798 max=0.004241 Jy/beam ! Clean residual mean=-0.000019 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.0822717 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 63 components and 0.0822717 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.239 mas, bmaj=17.28 mas, bpa=2.852 degrees ! Estimated noise=570.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00478336 Jy ! Component: 100 - total flux cleaned = 0.00850342 Jy ! Component: 150 - total flux cleaned = 0.0115 Jy ! Component: 200 - total flux cleaned = 0.0139517 Jy ! Total flux subtracted in 200 components = 0.0139517 Jy ! Clean residual min=-0.006320 max=0.005791 Jy/beam ! Clean residual mean=-0.000025 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 0.0962234 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202781 Jy ! Component: 100 - total flux cleaned = 0.00320514 Jy ! Component: 150 - total flux cleaned = 0.00412061 Jy ! Component: 200 - total flux cleaned = 0.00493443 Jy ! Total flux subtracted in 200 components = 0.00493443 Jy ! Clean residual min=-0.006362 max=0.005896 Jy/beam ! Clean residual mean=-0.000022 rms=0.001721 Jy/beam ! Combined flux in latest and established models = 0.101158 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 118 components and 0.101158 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=8.152 mas, bpa=-2.92 degrees ! Estimated noise=494.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010598 Jy ! Component: 100 - total flux cleaned = 0.00157778 Jy ! Component: 150 - total flux cleaned = 0.00198201 Jy ! Component: 200 - total flux cleaned = 0.0022518 Jy ! Total flux subtracted in 200 components = 0.0022518 Jy ! Clean residual min=-0.003901 max=0.004119 Jy/beam ! Clean residual mean=-0.000011 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.10341 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 129 components and 0.10341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106241Jy sigma=0.000790 ! Fit after self-cal, rms=0.106139Jy sigma=0.000790 wmodel J2315-1800_S_2014_05_31_pus_map.mod ! Writing 129 model components to file: J2315-1800_S_2014_05_31_pus_map.mod wobs J2315-1800_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J2315-1800_S_2014_05_31_pus_uvs.fits wwins J2315-1800_S_2014_05_31_pus_map.win ! wwins: Wrote 3 windows to J2315-1800_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.99178e-05 Jy ! Component: 100 - total flux cleaned = 0.000725365 Jy ! Component: 150 - total flux cleaned = 0.00120156 Jy ! Component: 200 - total flux cleaned = 0.00154012 Jy ! Component: 250 - total flux cleaned = 0.00181007 Jy ! Component: 300 - total flux cleaned = 0.00207089 Jy ! Component: 350 - total flux cleaned = 0.00242224 Jy ! Component: 400 - total flux cleaned = 0.00276048 Jy ! Component: 450 - total flux cleaned = 0.00304128 Jy ! Component: 500 - total flux cleaned = 0.00340441 Jy ! Component: 550 - total flux cleaned = 0.00353523 Jy ! Component: 600 - total flux cleaned = 0.00362062 Jy ! Component: 650 - total flux cleaned = 0.0038289 Jy ! Component: 700 - total flux cleaned = 0.00395055 Jy ! Component: 750 - total flux cleaned = 0.0041906 Jy ! Component: 800 - total flux cleaned = 0.00438642 Jy ! Component: 850 - total flux cleaned = 0.0045778 Jy ! Component: 900 - total flux cleaned = 0.00465325 Jy ! Component: 950 - total flux cleaned = 0.0048389 Jy ! Component: 1000 - total flux cleaned = 0.00502042 Jy ! Component: 1050 - total flux cleaned = 0.00512801 Jy ! Component: 1100 - total flux cleaned = 0.00537334 Jy ! Component: 1150 - total flux cleaned = 0.0054763 Jy ! Component: 1200 - total flux cleaned = 0.00564619 Jy ! Component: 1250 - total flux cleaned = 0.0057801 Jy ! Component: 1300 - total flux cleaned = 0.00597746 Jy ! Component: 1350 - total flux cleaned = 0.00620449 Jy ! Component: 1400 - total flux cleaned = 0.00639627 Jy ! Component: 1450 - total flux cleaned = 0.00655389 Jy ! Component: 1500 - total flux cleaned = 0.00683352 Jy ! Component: 1550 - total flux cleaned = 0.00701691 Jy ! Component: 1600 - total flux cleaned = 0.00725876 Jy ! Component: 1650 - total flux cleaned = 0.00740786 Jy ! Component: 1700 - total flux cleaned = 0.00770196 Jy ! Component: 1750 - total flux cleaned = 0.00787576 Jy ! Component: 1800 - total flux cleaned = 0.00801935 Jy ! Component: 1850 - total flux cleaned = 0.00821778 Jy ! Component: 1900 - total flux cleaned = 0.00844168 Jy ! Component: 1950 - total flux cleaned = 0.00855215 Jy ! Component: 2000 - total flux cleaned = 0.00871607 Jy ! Component: 2050 - total flux cleaned = 0.00887764 Jy ! Component: 2100 - total flux cleaned = 0.00901082 Jy ! Component: 2150 - total flux cleaned = 0.00903716 Jy ! Component: 2200 - total flux cleaned = 0.00932401 Jy ! Component: 2250 - total flux cleaned = 0.00950439 Jy ! Component: 2300 - total flux cleaned = 0.00965744 Jy ! Component: 2350 - total flux cleaned = 0.00978328 Jy ! Component: 2400 - total flux cleaned = 0.0100076 Jy ! Component: 2450 - total flux cleaned = 0.010057 Jy ! Component: 2500 - total flux cleaned = 0.0102033 Jy ! Component: 2550 - total flux cleaned = 0.0103237 Jy ! Component: 2600 - total flux cleaned = 0.0104906 Jy ! Component: 2650 - total flux cleaned = 0.010656 Jy ! Component: 2700 - total flux cleaned = 0.0108426 Jy ! Component: 2750 - total flux cleaned = 0.0110743 Jy ! Component: 2800 - total flux cleaned = 0.0112576 Jy ! Component: 2850 - total flux cleaned = 0.0114618 Jy ! Component: 2900 - total flux cleaned = 0.0116195 Jy ! Component: 2950 - total flux cleaned = 0.0118202 Jy ! Component: 3000 - total flux cleaned = 0.0119744 Jy ! Component: 3050 - total flux cleaned = 0.0121709 Jy ! Component: 3100 - total flux cleaned = 0.0123657 Jy ! Component: 3150 - total flux cleaned = 0.0124297 Jy ! Component: 3200 - total flux cleaned = 0.0126425 Jy ! Component: 3250 - total flux cleaned = 0.0128534 Jy ! Component: 3300 - total flux cleaned = 0.0129581 Jy ! Component: 3350 - total flux cleaned = 0.0132064 Jy ! Component: 3400 - total flux cleaned = 0.0132062 Jy ! Component: 3450 - total flux cleaned = 0.0133283 Jy ! Component: 3500 - total flux cleaned = 0.0134696 Jy ! Component: 3550 - total flux cleaned = 0.01367 Jy ! Component: 3600 - total flux cleaned = 0.0137891 Jy ! Component: 3650 - total flux cleaned = 0.0138678 Jy ! Component: 3700 - total flux cleaned = 0.0139459 Jy ! Component: 3750 - total flux cleaned = 0.0141198 Jy ! Component: 3800 - total flux cleaned = 0.0142157 Jy ! Component: 3850 - total flux cleaned = 0.0143111 Jy ! Component: 3900 - total flux cleaned = 0.0144056 Jy ! Component: 3950 - total flux cleaned = 0.0145179 Jy ! Component: 4000 - total flux cleaned = 0.0146479 Jy ! Component: 4050 - total flux cleaned = 0.0147585 Jy ! Total flux subtracted in 4096 components = 0.0148133 Jy ! Clean residual min=-0.001013 max=0.001122 Jy/beam ! Clean residual mean=-0.000010 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.118223 Jy keep ! Adding 403 model components to the UV plane model. ! The established model now contains 532 components and 0.118223 Jy ![Exited script file: muppet] wmap "J2315-1800_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.246 x 8.152 at -2.92 degrees (North through East) ! Clean map min=-0.0026472 max=0.051299 Jy/beam ! Writing clean map to FITS file: J2315-1800_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0512987 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000381961 device "J2315-1800_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J2315-1800_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.23375 2.23375 4.4675 8.935 17.87 35.74 71.48 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.051 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.246 x 8.152 at -2.92 degrees (North through East) ! Clean map min=-0.0026472 max=0.051299 Jy/beam quit ! Quitting program ! Log file J2315-1800_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:41:31 2016