! Started logfile: J2249-1251_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:39:42 2016 obs J2249-1251_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J2249-1251_S_2014_05_31_pus_uva.fits ! AN table 1: 101 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.981958 visibilities/baseline/integration-bin. ! Found source: J2249-1251 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 17852 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2249-1251_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.909257Jy sigma=0.009994 ! Fit after self-cal, rms=0.865493Jy sigma=0.009477 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.479 mas, bmaj=6.68 mas, bpa=-4.515 degrees ! Estimated noise=714.669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102658 Jy ! Component: 100 - total flux cleaned = 0.125369 Jy ! Total flux subtracted in 100 components = 0.125369 Jy ! Clean residual min=-0.004370 max=0.007704 Jy/beam ! Clean residual mean=0.000004 rms=0.001420 Jy/beam ! Combined flux in latest and established models = 0.125369 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.125369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082078Jy sigma=0.000852 ! Fit after self-cal, rms=0.082079Jy sigma=0.000852 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=7.825 mas, bpa=-3.576 degrees ! Estimated noise=490.558 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146927 Jy ! Component: 100 - total flux cleaned = 0.0224661 Jy ! Component: 150 - total flux cleaned = 0.0269583 Jy ! Component: 200 - total flux cleaned = 0.0296404 Jy ! Total flux subtracted in 200 components = 0.0296404 Jy ! Clean residual min=-0.005129 max=0.009314 Jy/beam ! Clean residual mean=-0.000009 rms=0.001799 Jy/beam ! Combined flux in latest and established models = 0.15501 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 48 components and 0.15501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079559Jy sigma=0.000822 ! Fit after self-cal, rms=0.079562Jy sigma=0.000821 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.79 HN 1.05 KP 0.95 ! LA 1.17 MK 0.97 NL 1.16 OV 0.97 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.91 HN 1.09 KP 0.95 ! LA 1.11 MK 0.99 NL 1.24 OV 1.01 ! PT 0.89 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 1.06 KP 0.85 ! LA 0.89 MK 1.00 NL 1.19 OV 0.96 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 0.94 HN 1.05 KP 0.86 ! LA 0.85 MK 1.01 NL 1.24 OV 1.05 ! PT 0.95 SC 1.00 ! ! ! Fit before self-cal, rms=0.079562Jy sigma=0.000821 ! Fit after self-cal, rms=0.079003Jy sigma=0.000792 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=7.935 mas, bpa=-3.598 degrees ! Estimated noise=490.453 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.35455e-05 Jy ! Component: 100 - total flux cleaned = -0.000152885 Jy ! Component: 150 - total flux cleaned = -0.000205479 Jy ! Component: 200 - total flux cleaned = -0.000237883 Jy ! Total flux subtracted in 200 components = -0.000237883 Jy ! Clean residual min=-0.003454 max=0.005864 Jy/beam ! Clean residual mean=-0.000003 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 0.154772 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.154772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078992Jy sigma=0.000792 ! Fit after self-cal, rms=0.079103Jy sigma=0.000791 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079103Jy sigma=0.000791 ! Fit after self-cal, rms=0.079310Jy sigma=0.000789 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.946 mas, bpa=-3.651 degrees ! Estimated noise=490.361 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.12747e-05 Jy ! Component: 100 - total flux cleaned = -8.39761e-05 Jy ! Component: 150 - total flux cleaned = -0.000116243 Jy ! Component: 200 - total flux cleaned = -0.000146333 Jy ! Total flux subtracted in 200 components = -0.000146333 Jy ! Clean residual min=-0.003312 max=0.005976 Jy/beam ! Clean residual mean=-0.000001 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.154625 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 0.154625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079298Jy sigma=0.000789 ! Fit after self-cal, rms=0.079306Jy sigma=0.000789 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00587855 Jy ! Component: 100 - total flux cleaned = 0.00917697 Jy ! Component: 150 - total flux cleaned = 0.0112845 Jy ! Component: 200 - total flux cleaned = 0.0116025 Jy ! Total flux subtracted in 200 components = 0.0116025 Jy ! Clean residual min=-0.002714 max=0.005494 Jy/beam ! Clean residual mean=0.000000 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.166228 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 86 components and 0.166228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078855Jy sigma=0.000784 ! Fit after self-cal, rms=0.078792Jy sigma=0.000783 ! Inverting map ! Added new window around map position (13, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00421403 Jy ! Component: 100 - total flux cleaned = 0.00663802 Jy ! Component: 150 - total flux cleaned = 0.00842535 Jy ! Component: 200 - total flux cleaned = 0.00922034 Jy ! Total flux subtracted in 200 components = 0.00922034 Jy ! Clean residual min=-0.002673 max=0.003231 Jy/beam ! Clean residual mean=0.000001 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.175448 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 118 components and 0.175448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078544Jy sigma=0.000780 ! Fit after self-cal, rms=0.078534Jy sigma=0.000779 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078534Jy sigma=0.000779 ! Fit after self-cal, rms=0.077849Jy sigma=0.000779 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=7.937 mas, bpa=-3.798 degrees ! Estimated noise=489.882 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221109 Jy ! Component: 100 - total flux cleaned = 0.00340738 Jy ! Component: 150 - total flux cleaned = 0.00428694 Jy ! Component: 200 - total flux cleaned = 0.00477287 Jy ! Total flux subtracted in 200 components = 0.00477287 Jy ! Clean residual min=-0.002374 max=0.003029 Jy/beam ! Clean residual mean=0.000000 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.180221 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 149 components and 0.180221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077760Jy sigma=0.000777 ! Fit after self-cal, rms=0.077748Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-45, -126). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276422 Jy ! Component: 100 - total flux cleaned = 0.00414903 Jy ! Component: 150 - total flux cleaned = 0.00488823 Jy ! Component: 200 - total flux cleaned = 0.00541866 Jy ! Total flux subtracted in 200 components = 0.00541866 Jy ! Clean residual min=-0.002066 max=0.002890 Jy/beam ! Clean residual mean=0.000002 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.18564 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 174 components and 0.18564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077634Jy sigma=0.000776 ! Fit after self-cal, rms=0.077623Jy sigma=0.000776 ! Inverting map ! Added new window around map position (-2.5, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244691 Jy ! Component: 100 - total flux cleaned = 0.00282829 Jy ! Component: 150 - total flux cleaned = 0.00318394 Jy ! Component: 200 - total flux cleaned = 0.00361226 Jy ! Total flux subtracted in 200 components = 0.00361226 Jy ! Clean residual min=-0.001870 max=0.002088 Jy/beam ! Clean residual mean=0.000002 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.189252 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 198 components and 0.189252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077517Jy sigma=0.000775 ! Fit after self-cal, rms=0.077507Jy sigma=0.000775 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077507Jy sigma=0.000775 ! Fit after self-cal, rms=0.076927Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.633 mas, bmaj=15.06 mas, bpa=2.337 degrees ! Estimated noise=611.857 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201985 Jy ! Component: 100 - total flux cleaned = 0.00291362 Jy ! Component: 150 - total flux cleaned = 0.00366509 Jy ! Component: 200 - total flux cleaned = 0.00414974 Jy ! Total flux subtracted in 200 components = 0.00414974 Jy ! Clean residual min=-0.002548 max=0.002470 Jy/beam ! Clean residual mean=0.000002 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.193402 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 225 components and 0.193402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076898Jy sigma=0.000774 ! Fit after self-cal, rms=0.076883Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000382894 Jy ! Component: 100 - total flux cleaned = 0.000623066 Jy ! Component: 150 - total flux cleaned = 0.00089459 Jy ! Component: 200 - total flux cleaned = 0.00113833 Jy ! Total flux subtracted in 200 components = 0.00113833 Jy ! Clean residual min=-0.002405 max=0.002370 Jy/beam ! Clean residual mean=0.000002 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.19454 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 235 components and 0.19454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076875Jy sigma=0.000774 ! Fit after self-cal, rms=0.076873Jy sigma=0.000774 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=7.932 mas, bpa=-3.904 degrees ! Estimated noise=488.946 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.067 x 7.932 at -3.904 degrees (North through East) ! Clean map min=-0.0017531 max=0.1331 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.476 mas, bmaj=6.756 mas, bpa=-4.658 degrees ! Estimated noise=713.904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102439 Jy ! Component: 100 - total flux cleaned = 0.125176 Jy ! Component: 150 - total flux cleaned = 0.134442 Jy ! Component: 200 - total flux cleaned = 0.14084 Jy ! Total flux subtracted in 200 components = 0.14084 Jy ! Clean residual min=-0.003151 max=0.004393 Jy/beam ! Clean residual mean=0.000006 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.14084 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.14084 Jy ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=7.932 mas, bpa=-3.904 degrees ! Estimated noise=488.946 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00907049 Jy ! Component: 100 - total flux cleaned = 0.0155955 Jy ! Component: 150 - total flux cleaned = 0.0207427 Jy ! Component: 200 - total flux cleaned = 0.0250361 Jy ! Total flux subtracted in 200 components = 0.0250361 Jy ! Clean residual min=-0.003123 max=0.003473 Jy/beam ! Clean residual mean=-0.000002 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.165876 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 113 components and 0.165876 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.633 mas, bmaj=15.06 mas, bpa=2.337 degrees ! Estimated noise=611.857 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00626306 Jy ! Component: 100 - total flux cleaned = 0.0107115 Jy ! Component: 150 - total flux cleaned = 0.0141688 Jy ! Component: 200 - total flux cleaned = 0.0169058 Jy ! Total flux subtracted in 200 components = 0.0169058 Jy ! Clean residual min=-0.003475 max=0.002727 Jy/beam ! Clean residual mean=-0.000000 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.182782 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022095 Jy ! Component: 100 - total flux cleaned = 0.00402013 Jy ! Component: 150 - total flux cleaned = 0.00551919 Jy ! Component: 200 - total flux cleaned = 0.00658607 Jy ! Total flux subtracted in 200 components = 0.00658607 Jy ! Clean residual min=-0.002845 max=0.002615 Jy/beam ! Clean residual mean=0.000003 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.189368 Jy ! Adding 155 model components to the UV plane model. ! The established model now contains 249 components and 0.189368 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=7.932 mas, bpa=-3.904 degrees ! Estimated noise=488.946 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165385 Jy ! Component: 100 - total flux cleaned = 0.00292357 Jy ! Component: 150 - total flux cleaned = 0.00369865 Jy ! Component: 200 - total flux cleaned = 0.00408441 Jy ! Total flux subtracted in 200 components = 0.00408441 Jy ! Clean residual min=-0.001787 max=0.002271 Jy/beam ! Clean residual mean=0.000002 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.193453 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 271 components and 0.193453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076905Jy sigma=0.000774 ! Fit after self-cal, rms=0.076904Jy sigma=0.000774 wmodel J2249-1251_S_2014_05_31_pus_map.mod ! Writing 271 model components to file: J2249-1251_S_2014_05_31_pus_map.mod wobs J2249-1251_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J2249-1251_S_2014_05_31_pus_uvs.fits wwins J2249-1251_S_2014_05_31_pus_map.win ! wwins: Wrote 5 windows to J2249-1251_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000755754 Jy ! Component: 100 - total flux cleaned = 0.00098821 Jy ! Component: 150 - total flux cleaned = 0.00123726 Jy ! Component: 200 - total flux cleaned = 0.00138331 Jy ! Component: 250 - total flux cleaned = 0.0015242 Jy ! Component: 300 - total flux cleaned = 0.00155073 Jy ! Component: 350 - total flux cleaned = 0.00160322 Jy ! Component: 400 - total flux cleaned = 0.00167973 Jy ! Component: 450 - total flux cleaned = 0.00180398 Jy ! Component: 500 - total flux cleaned = 0.00185215 Jy ! Component: 550 - total flux cleaned = 0.00194685 Jy ! Component: 600 - total flux cleaned = 0.0021313 Jy ! Component: 650 - total flux cleaned = 0.00219919 Jy ! Component: 700 - total flux cleaned = 0.00226631 Jy ! Component: 750 - total flux cleaned = 0.00241845 Jy ! Component: 800 - total flux cleaned = 0.00246069 Jy ! Component: 850 - total flux cleaned = 0.0025863 Jy ! Component: 900 - total flux cleaned = 0.00264804 Jy ! Component: 950 - total flux cleaned = 0.0026888 Jy ! Component: 1000 - total flux cleaned = 0.00282819 Jy ! Component: 1050 - total flux cleaned = 0.00288704 Jy ! Component: 1100 - total flux cleaned = 0.0029255 Jy ! Component: 1150 - total flux cleaned = 0.00298294 Jy ! Component: 1200 - total flux cleaned = 0.00303916 Jy ! Component: 1250 - total flux cleaned = 0.00311307 Jy ! Component: 1300 - total flux cleaned = 0.00304033 Jy ! Component: 1350 - total flux cleaned = 0.00307652 Jy ! Component: 1400 - total flux cleaned = 0.00304097 Jy ! Component: 1450 - total flux cleaned = 0.00302372 Jy ! Component: 1500 - total flux cleaned = 0.00302391 Jy ! Component: 1550 - total flux cleaned = 0.00307507 Jy ! Component: 1600 - total flux cleaned = 0.00315945 Jy ! Component: 1650 - total flux cleaned = 0.00320928 Jy ! Component: 1700 - total flux cleaned = 0.00319266 Jy ! Component: 1750 - total flux cleaned = 0.00320884 Jy ! Component: 1800 - total flux cleaned = 0.00320853 Jy ! Component: 1850 - total flux cleaned = 0.00322476 Jy ! Component: 1900 - total flux cleaned = 0.00327199 Jy ! Component: 1950 - total flux cleaned = 0.00325654 Jy ! Component: 2000 - total flux cleaned = 0.00327215 Jy ! Component: 2050 - total flux cleaned = 0.0033642 Jy ! Component: 2100 - total flux cleaned = 0.0033791 Jy ! Component: 2150 - total flux cleaned = 0.00339411 Jy ! Component: 2200 - total flux cleaned = 0.00345359 Jy ! Component: 2250 - total flux cleaned = 0.00348287 Jy ! Component: 2300 - total flux cleaned = 0.00346824 Jy ! Component: 2350 - total flux cleaned = 0.00349698 Jy ! Component: 2400 - total flux cleaned = 0.00351117 Jy ! Component: 2450 - total flux cleaned = 0.00348303 Jy ! Component: 2500 - total flux cleaned = 0.00348308 Jy ! Component: 2550 - total flux cleaned = 0.00349695 Jy ! Component: 2600 - total flux cleaned = 0.00346934 Jy ! Component: 2650 - total flux cleaned = 0.00352369 Jy ! Component: 2700 - total flux cleaned = 0.0034968 Jy ! Component: 2750 - total flux cleaned = 0.00349688 Jy ! Component: 2800 - total flux cleaned = 0.00349688 Jy ! Component: 2850 - total flux cleaned = 0.00348374 Jy ! Component: 2900 - total flux cleaned = 0.00353594 Jy ! Component: 2950 - total flux cleaned = 0.00353582 Jy ! Component: 3000 - total flux cleaned = 0.00354852 Jy ! Component: 3050 - total flux cleaned = 0.00354848 Jy ! Component: 3100 - total flux cleaned = 0.0035485 Jy ! Component: 3150 - total flux cleaned = 0.00356098 Jy ! Component: 3200 - total flux cleaned = 0.00351172 Jy ! Component: 3250 - total flux cleaned = 0.00351202 Jy ! Component: 3300 - total flux cleaned = 0.00354859 Jy ! Component: 3350 - total flux cleaned = 0.00359688 Jy ! Component: 3400 - total flux cleaned = 0.00358504 Jy ! Component: 3450 - total flux cleaned = 0.00356121 Jy ! Component: 3500 - total flux cleaned = 0.00358472 Jy ! Component: 3550 - total flux cleaned = 0.00358478 Jy ! Component: 3600 - total flux cleaned = 0.00359643 Jy ! Component: 3650 - total flux cleaned = 0.00365389 Jy ! Component: 3700 - total flux cleaned = 0.00366521 Jy ! Component: 3750 - total flux cleaned = 0.00361975 Jy ! Component: 3800 - total flux cleaned = 0.00364236 Jy ! Component: 3850 - total flux cleaned = 0.00372079 Jy ! Component: 3900 - total flux cleaned = 0.00367621 Jy ! Component: 3950 - total flux cleaned = 0.00375362 Jy ! Component: 4000 - total flux cleaned = 0.00379759 Jy ! Component: 4050 - total flux cleaned = 0.00383034 Jy ! Total flux subtracted in 4096 components = 0.00387371 Jy ! Clean residual min=-0.000671 max=0.000637 Jy/beam ! Clean residual mean=0.000002 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.197326 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 573 components and 0.197326 Jy ![Exited script file: muppet] wmap "J2249-1251_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.067 x 7.932 at -3.904 degrees (North through East) ! Clean map min=-0.0013811 max=0.13349 Jy/beam ! Writing clean map to FITS file: J2249-1251_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.133488 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000197602 device "J2249-1251_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J2249-1251_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.44409 0.44409 0.888179 1.77636 3.55272 7.10543 14.2109 28.4217 56.8435 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.133 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.067 x 7.932 at -3.904 degrees (North through East) ! Clean map min=-0.0013811 max=0.13349 Jy/beam quit ! Quitting program ! Log file J2249-1251_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:39:48 2016