! Started logfile: J1936+3642_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:37:05 2016 obs J1936+3642_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J1936+3642_S_2014_05_31_pus_uva.fits ! AN table 1: 82 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975881 visibilities/baseline/integration-bin. ! Found source: J1936+3642 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 14404 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1936+3642_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.957607Jy sigma=0.012140 ! Fit after self-cal, rms=0.935292Jy sigma=0.011876 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=4.661 mas, bpa=-7.721 degrees ! Estimated noise=702.894 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0464969 Jy ! Component: 100 - total flux cleaned = 0.0655402 Jy ! Total flux subtracted in 100 components = 0.0655402 Jy ! Clean residual min=-0.005944 max=0.008932 Jy/beam ! Clean residual mean=0.000050 rms=0.001853 Jy/beam ! Combined flux in latest and established models = 0.0655402 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0655402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085938Jy sigma=0.001061 ! Fit after self-cal, rms=0.085787Jy sigma=0.001059 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.886 mas, bmaj=5.573 mas, bpa=-7.624 degrees ! Estimated noise=473.185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161278 Jy ! Component: 100 - total flux cleaned = 0.0234139 Jy ! Component: 150 - total flux cleaned = 0.0275554 Jy ! Component: 200 - total flux cleaned = 0.0301439 Jy ! Total flux subtracted in 200 components = 0.0301439 Jy ! Clean residual min=-0.009779 max=0.013940 Jy/beam ! Clean residual mean=0.000119 rms=0.003346 Jy/beam ! Combined flux in latest and established models = 0.0956841 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 47 components and 0.0956841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082978Jy sigma=0.001023 ! Fit after self-cal, rms=0.082940Jy sigma=0.001022 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.98 KP 0.92 ! LA 1.28 MK 1.21 NL 0.94 OV 0.99 ! PT 0.90 SC 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.27 HN 0.98 KP 0.92 ! LA 1.14 MK 1.14 NL 1.05 OV 1.01 ! PT 0.86 SC 1.10 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.56 HN 1.05 KP 0.88 ! LA 0.81 MK 1.09 NL 1.04 OV 0.86 ! PT 0.84 SC 0.96 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.32 HN 1.31 KP 0.98 ! LA 0.65 MK 1.04 NL 1.11 OV 0.99 ! PT 0.87 SC 1.13 ! ! ! Fit before self-cal, rms=0.082940Jy sigma=0.001022 ! Fit after self-cal, rms=0.085661Jy sigma=0.001004 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.009 mas, bmaj=5.723 mas, bpa=-6.612 degrees ! Estimated noise=481.944 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000474985 Jy ! Component: 100 - total flux cleaned = 0.000473888 Jy ! Component: 150 - total flux cleaned = 0.000430934 Jy ! Component: 200 - total flux cleaned = 0.000413805 Jy ! Total flux subtracted in 200 components = 0.000413805 Jy ! Clean residual min=-0.009436 max=0.014129 Jy/beam ! Clean residual mean=0.000095 rms=0.003309 Jy/beam ! Combined flux in latest and established models = 0.0960979 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.0960979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085630Jy sigma=0.001004 ! Fit after self-cal, rms=0.086222Jy sigma=0.001001 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086222Jy sigma=0.001001 ! Fit after self-cal, rms=0.114537Jy sigma=0.000967 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.021 mas, bmaj=5.73 mas, bpa=-6.281 degrees ! Estimated noise=503.387 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123645 Jy ! Component: 100 - total flux cleaned = 0.00106287 Jy ! Component: 150 - total flux cleaned = 0.000867809 Jy ! Component: 200 - total flux cleaned = 0.000695923 Jy ! Total flux subtracted in 200 components = 0.000695923 Jy ! Clean residual min=-0.009142 max=0.013631 Jy/beam ! Clean residual mean=0.000021 rms=0.003007 Jy/beam ! Combined flux in latest and established models = 0.0967938 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 57 components and 0.0967938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114324Jy sigma=0.000968 ! Fit after self-cal, rms=0.115330Jy sigma=0.000965 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-90.5, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132683 Jy ! Component: 100 - total flux cleaned = 0.0198243 Jy ! Component: 150 - total flux cleaned = 0.0237133 Jy ! Component: 200 - total flux cleaned = 0.0264255 Jy ! Total flux subtracted in 200 components = 0.0264255 Jy ! Clean residual min=-0.009134 max=0.009749 Jy/beam ! Clean residual mean=0.000006 rms=0.002659 Jy/beam ! Combined flux in latest and established models = 0.123219 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 116 components and 0.123219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113537Jy sigma=0.000944 ! Fit after self-cal, rms=0.112994Jy sigma=0.000937 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112994Jy sigma=0.000937 ! Fit after self-cal, rms=0.113269Jy sigma=0.000933 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.082 mas, bmaj=5.778 mas, bpa=-6.385 degrees ! Estimated noise=502.378 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00531933 Jy ! Component: 100 - total flux cleaned = 0.00810875 Jy ! Component: 150 - total flux cleaned = 0.00958346 Jy ! Component: 200 - total flux cleaned = 0.010644 Jy ! Total flux subtracted in 200 components = 0.010644 Jy ! Clean residual min=-0.009263 max=0.010179 Jy/beam ! Clean residual mean=0.000008 rms=0.002714 Jy/beam ! Combined flux in latest and established models = 0.133863 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 149 components and 0.133863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112865Jy sigma=0.000930 ! Fit after self-cal, rms=0.112814Jy sigma=0.000929 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227638 Jy ! Component: 100 - total flux cleaned = 0.00339453 Jy ! Component: 150 - total flux cleaned = 0.00391124 Jy ! Component: 200 - total flux cleaned = 0.00442258 Jy ! Total flux subtracted in 200 components = 0.00442258 Jy ! Clean residual min=-0.009433 max=0.010126 Jy/beam ! Clean residual mean=0.000006 rms=0.002725 Jy/beam ! Combined flux in latest and established models = 0.138286 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 160 components and 0.138286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112648Jy sigma=0.000928 ! Fit after self-cal, rms=0.112613Jy sigma=0.000928 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112613Jy sigma=0.000928 ! Fit after self-cal, rms=0.112232Jy sigma=0.000926 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.44 mas, bmaj=9.814 mas, bpa=-6.621 degrees ! Estimated noise=565.147 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275257 Jy ! Component: 100 - total flux cleaned = 0.00393199 Jy ! Component: 150 - total flux cleaned = 0.00475741 Jy ! Component: 200 - total flux cleaned = 0.00523641 Jy ! Total flux subtracted in 200 components = 0.00523641 Jy ! Clean residual min=-0.016153 max=0.015719 Jy/beam ! Clean residual mean=0.000032 rms=0.004871 Jy/beam ! Combined flux in latest and established models = 0.143522 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 169 components and 0.143522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112153Jy sigma=0.000927 ! Fit after self-cal, rms=0.112093Jy sigma=0.000926 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112333 Jy ! Component: 100 - total flux cleaned = 0.00195024 Jy ! Component: 150 - total flux cleaned = 0.00241733 Jy ! Component: 200 - total flux cleaned = 0.0027168 Jy ! Total flux subtracted in 200 components = 0.0027168 Jy ! Clean residual min=-0.016310 max=0.015829 Jy/beam ! Clean residual mean=0.000028 rms=0.004894 Jy/beam ! Combined flux in latest and established models = 0.146239 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 174 components and 0.146239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112052Jy sigma=0.000927 ! Fit after self-cal, rms=0.112001Jy sigma=0.000926 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.111 mas, bmaj=5.812 mas, bpa=-6.974 degrees ! Estimated noise=504.819 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.111 x 5.812 at -6.974 degrees (North through East) ! Clean map min=-0.010163 max=0.071297 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=4.778 mas, bpa=-9.219 degrees ! Estimated noise=778.642 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0490312 Jy ! Component: 100 - total flux cleaned = 0.0696202 Jy ! Component: 150 - total flux cleaned = 0.0821027 Jy ! Component: 200 - total flux cleaned = 0.0916156 Jy ! Total flux subtracted in 200 components = 0.0916156 Jy ! Clean residual min=-0.006838 max=0.007421 Jy/beam ! Clean residual mean=0.000020 rms=0.001826 Jy/beam ! Combined flux in latest and established models = 0.0916156 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.0916156 Jy ! Inverting map and beam ! Estimated beam: bmin=4.111 mas, bmaj=5.812 mas, bpa=-6.974 degrees ! Estimated noise=504.819 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127494 Jy ! Component: 100 - total flux cleaned = 0.0221973 Jy ! Component: 150 - total flux cleaned = 0.0295349 Jy ! Component: 200 - total flux cleaned = 0.035328 Jy ! Total flux subtracted in 200 components = 0.035328 Jy ! Clean residual min=-0.009856 max=0.010036 Jy/beam ! Clean residual mean=0.000026 rms=0.002868 Jy/beam ! Combined flux in latest and established models = 0.126944 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 79 components and 0.126944 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.44 mas, bmaj=9.814 mas, bpa=-6.621 degrees ! Estimated noise=565.147 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00776259 Jy ! Component: 100 - total flux cleaned = 0.0122999 Jy ! Component: 150 - total flux cleaned = 0.0140417 Jy ! Component: 200 - total flux cleaned = 0.0154736 Jy ! Total flux subtracted in 200 components = 0.0154736 Jy ! Clean residual min=-0.016421 max=0.015504 Jy/beam ! Clean residual mean=0.000035 rms=0.004926 Jy/beam ! Combined flux in latest and established models = 0.142417 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107415 Jy ! Component: 100 - total flux cleaned = 0.00188549 Jy ! Component: 150 - total flux cleaned = 0.00264734 Jy ! Component: 200 - total flux cleaned = 0.00323035 Jy ! Total flux subtracted in 200 components = 0.00323035 Jy ! Clean residual min=-0.016383 max=0.015819 Jy/beam ! Clean residual mean=0.000031 rms=0.004896 Jy/beam ! Combined flux in latest and established models = 0.145648 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 108 components and 0.145648 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.111 mas, bmaj=5.812 mas, bpa=-6.974 degrees ! Estimated noise=504.819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123501 Jy ! Component: 100 - total flux cleaned = 0.00151632 Jy ! Component: 150 - total flux cleaned = 0.00163903 Jy ! Component: 200 - total flux cleaned = 0.00164117 Jy ! Total flux subtracted in 200 components = 0.00164117 Jy ! Clean residual min=-0.009865 max=0.009966 Jy/beam ! Clean residual mean=0.000011 rms=0.002738 Jy/beam ! Combined flux in latest and established models = 0.147289 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 126 components and 0.147289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111948Jy sigma=0.000927 ! Fit after self-cal, rms=0.111918Jy sigma=0.000927 wmodel J1936+3642_S_2014_05_31_pus_map.mod ! Writing 126 model components to file: J1936+3642_S_2014_05_31_pus_map.mod wobs J1936+3642_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J1936+3642_S_2014_05_31_pus_uvs.fits wwins J1936+3642_S_2014_05_31_pus_map.win ! wwins: Wrote 2 windows to J1936+3642_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000727317 Jy ! Component: 100 - total flux cleaned = 0.00140783 Jy ! Component: 150 - total flux cleaned = 0.00173192 Jy ! Component: 200 - total flux cleaned = 0.00247631 Jy ! Component: 250 - total flux cleaned = 0.00303924 Jy ! Component: 300 - total flux cleaned = 0.00370741 Jy ! Component: 350 - total flux cleaned = 0.00459561 Jy ! Component: 400 - total flux cleaned = 0.00557376 Jy ! Component: 450 - total flux cleaned = 0.00687 Jy ! Component: 500 - total flux cleaned = 0.00789423 Jy ! Component: 550 - total flux cleaned = 0.0087763 Jy ! Component: 600 - total flux cleaned = 0.00973942 Jy ! Component: 650 - total flux cleaned = 0.0106796 Jy ! Component: 700 - total flux cleaned = 0.0117002 Jy ! Component: 750 - total flux cleaned = 0.0128952 Jy ! Component: 800 - total flux cleaned = 0.0140633 Jy ! Component: 850 - total flux cleaned = 0.0151095 Jy ! Component: 900 - total flux cleaned = 0.0164153 Jy ! Component: 950 - total flux cleaned = 0.0175113 Jy ! Component: 1000 - total flux cleaned = 0.0185856 Jy ! Component: 1050 - total flux cleaned = 0.0196403 Jy ! Component: 1100 - total flux cleaned = 0.0208486 Jy ! Component: 1150 - total flux cleaned = 0.0220337 Jy ! Component: 1200 - total flux cleaned = 0.022865 Jy ! Component: 1250 - total flux cleaned = 0.0240099 Jy ! Component: 1300 - total flux cleaned = 0.0249725 Jy ! Component: 1350 - total flux cleaned = 0.0259984 Jy ! Component: 1400 - total flux cleaned = 0.02693 Jy ! Component: 1450 - total flux cleaned = 0.0279997 Jy ! Component: 1500 - total flux cleaned = 0.0290511 Jy ! Component: 1550 - total flux cleaned = 0.0300121 Jy ! Component: 1600 - total flux cleaned = 0.0308135 Jy ! Component: 1650 - total flux cleaned = 0.0318176 Jy ! Component: 1700 - total flux cleaned = 0.0328768 Jy ! Component: 1750 - total flux cleaned = 0.0334323 Jy ! Component: 1800 - total flux cleaned = 0.0343229 Jy ! Component: 1850 - total flux cleaned = 0.0350646 Jy ! Component: 1900 - total flux cleaned = 0.0358632 Jy ! Component: 1950 - total flux cleaned = 0.0367797 Jy ! Component: 2000 - total flux cleaned = 0.0373616 Jy ! Component: 2050 - total flux cleaned = 0.0380639 Jy ! Component: 2100 - total flux cleaned = 0.0388819 Jy ! Component: 2150 - total flux cleaned = 0.0394407 Jy ! Component: 2200 - total flux cleaned = 0.0401774 Jy ! Component: 2250 - total flux cleaned = 0.0407835 Jy ! Component: 2300 - total flux cleaned = 0.0413811 Jy ! Component: 2350 - total flux cleaned = 0.0417954 Jy ! Component: 2400 - total flux cleaned = 0.0424384 Jy ! Component: 2450 - total flux cleaned = 0.0430159 Jy ! Component: 2500 - total flux cleaned = 0.0434149 Jy ! Component: 2550 - total flux cleaned = 0.0440351 Jy ! Component: 2600 - total flux cleaned = 0.0444808 Jy ! Component: 2650 - total flux cleaned = 0.0450883 Jy ! Component: 2700 - total flux cleaned = 0.0456342 Jy ! Component: 2750 - total flux cleaned = 0.0460656 Jy ! Component: 2800 - total flux cleaned = 0.0464934 Jy ! Component: 2850 - total flux cleaned = 0.0469691 Jy ! Component: 2900 - total flux cleaned = 0.0472839 Jy ! Component: 2950 - total flux cleaned = 0.0478544 Jy ! Component: 3000 - total flux cleaned = 0.0484187 Jy ! Component: 3050 - total flux cleaned = 0.0488753 Jy ! Component: 3100 - total flux cleaned = 0.0491267 Jy ! Component: 3150 - total flux cleaned = 0.0495256 Jy ! Component: 3200 - total flux cleaned = 0.049871 Jy ! Component: 3250 - total flux cleaned = 0.0501158 Jy ! Component: 3300 - total flux cleaned = 0.0505514 Jy ! Component: 3350 - total flux cleaned = 0.0509818 Jy ! Component: 3400 - total flux cleaned = 0.0511238 Jy ! Component: 3450 - total flux cleaned = 0.0513593 Jy ! Component: 3500 - total flux cleaned = 0.0517327 Jy ! Component: 3550 - total flux cleaned = 0.0520557 Jy ! Component: 3600 - total flux cleaned = 0.0524222 Jy ! Component: 3650 - total flux cleaned = 0.0524679 Jy ! Component: 3700 - total flux cleaned = 0.0528286 Jy ! Component: 3750 - total flux cleaned = 0.0530079 Jy ! Component: 3800 - total flux cleaned = 0.0532291 Jy ! Component: 3850 - total flux cleaned = 0.0534047 Jy ! Component: 3900 - total flux cleaned = 0.05371 Jy ! Component: 3950 - total flux cleaned = 0.0537964 Jy ! Component: 4000 - total flux cleaned = 0.0541389 Jy ! Component: 4050 - total flux cleaned = 0.054266 Jy ! Total flux subtracted in 4096 components = 0.0544349 Jy ! Clean residual min=-0.002402 max=0.002695 Jy/beam ! Clean residual mean=0.000003 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.201724 Jy keep ! Adding 578 model components to the UV plane model. ! The established model now contains 704 components and 0.201724 Jy ![Exited script file: muppet] wmap "J1936+3642_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.111 x 5.812 at -6.974 degrees (North through East) ! Clean map min=-0.0054998 max=0.072377 Jy/beam ! Writing clean map to FITS file: J1936+3642_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0723772 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000989226 device "J1936+3642_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J1936+3642_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.1003 4.1003 8.20059 16.4012 32.8024 65.6047 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.111 x 5.812 at -6.974 degrees (North through East) ! Clean map min=-0.0054998 max=0.072377 Jy/beam quit ! Quitting program ! Log file J1936+3642_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:37:10 2016