! Started logfile: J1722+1013_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:33:03 2016 obs J1722+1013_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J1722+1013_S_2014_05_31_pus_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.954776 visibilities/baseline/integration-bin. ! Found source: J1722+1013 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 9796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1722+1013_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.760184Jy sigma=0.009392 ! Fit after self-cal, rms=0.740714Jy sigma=0.009137 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.637 mas, bmaj=6.734 mas, bpa=-2.994 degrees ! Estimated noise=809.729 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.189468 Jy ! Component: 100 - total flux cleaned = 0.260235 Jy ! Total flux subtracted in 100 components = 0.260235 Jy ! Clean residual min=-0.010017 max=0.032597 Jy/beam ! Clean residual mean=0.000053 rms=0.003457 Jy/beam ! Combined flux in latest and established models = 0.260235 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.260235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099621Jy sigma=0.001181 ! Fit after self-cal, rms=0.099373Jy sigma=0.001178 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0368056 Jy ! Component: 100 - total flux cleaned = 0.0566393 Jy ! Total flux subtracted in 100 components = 0.0566393 Jy ! Clean residual min=-0.005815 max=0.015512 Jy/beam ! Clean residual mean=0.000023 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 0.316875 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 11 components and 0.316875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079634Jy sigma=0.000926 ! Fit after self-cal, rms=0.079599Jy sigma=0.000925 ! Inverting map ! Added new window around map position (-4, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147684 Jy ! Component: 100 - total flux cleaned = 0.0237281 Jy ! Total flux subtracted in 100 components = 0.0237281 Jy ! Clean residual min=-0.005103 max=0.006211 Jy/beam ! Clean residual mean=0.000011 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.340603 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 23 components and 0.340603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075598Jy sigma=0.000878 ! Fit after self-cal, rms=0.075482Jy sigma=0.000877 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=7.644 mas, bpa=-3.29 degrees ! Estimated noise=585.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00880239 Jy ! Component: 100 - total flux cleaned = 0.0135919 Jy ! Component: 150 - total flux cleaned = 0.0166276 Jy ! Component: 200 - total flux cleaned = 0.0186373 Jy ! Total flux subtracted in 200 components = 0.0186373 Jy ! Clean residual min=-0.004212 max=0.005219 Jy/beam ! Clean residual mean=-0.000004 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.35924 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 60 components and 0.35924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074180Jy sigma=0.000867 ! Fit after self-cal, rms=0.074147Jy sigma=0.000866 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.84 HN 1.00 KP 1.06 ! LA 1.18 MK 1.03 NL 0.95 OV 0.97 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.02 KP 1.01 ! LA 1.13 MK 1.01 NL 1.08 OV 1.00 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.12 HN 1.02 KP 0.90 ! LA 0.91 MK 1.04 NL 1.08 OV 0.94 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.98 HN 0.99 KP 0.89 ! LA 0.87 MK 0.99 NL 1.05 OV 1.01 ! PT 1.01 SC 0.97 ! ! ! Fit before self-cal, rms=0.074147Jy sigma=0.000866 ! Fit after self-cal, rms=0.067297Jy sigma=0.000788 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=7.655 mas, bpa=-3.059 degrees ! Estimated noise=585.695 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142238 Jy ! Component: 100 - total flux cleaned = -6.87605e-05 Jy ! Component: 150 - total flux cleaned = -3.91971e-05 Jy ! Component: 200 - total flux cleaned = -3.68018e-05 Jy ! Total flux subtracted in 200 components = -3.68018e-05 Jy ! Clean residual min=-0.002599 max=0.003295 Jy/beam ! Clean residual mean=-0.000002 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.359203 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 74 components and 0.359203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067249Jy sigma=0.000787 ! Fit after self-cal, rms=0.067249Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067249Jy sigma=0.000787 ! Fit after self-cal, rms=0.066547Jy sigma=0.000777 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=7.651 mas, bpa=-3.083 degrees ! Estimated noise=585.534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121399 Jy ! Component: 100 - total flux cleaned = -0.000130364 Jy ! Component: 150 - total flux cleaned = -8.89101e-05 Jy ! Component: 200 - total flux cleaned = -8.94421e-05 Jy ! Total flux subtracted in 200 components = -8.94421e-05 Jy ! Clean residual min=-0.001995 max=0.002192 Jy/beam ! Clean residual mean=-0.000002 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.359114 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 85 components and 0.359114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066528Jy sigma=0.000777 ! Fit after self-cal, rms=0.066529Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015675 Jy ! Component: 100 - total flux cleaned = 0.00188298 Jy ! Component: 150 - total flux cleaned = 0.00200624 Jy ! Component: 200 - total flux cleaned = 0.00197465 Jy ! Total flux subtracted in 200 components = 0.00197465 Jy ! Clean residual min=-0.001812 max=0.001852 Jy/beam ! Clean residual mean=-0.000003 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.361088 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 114 components and 0.361088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066444Jy sigma=0.000776 ! Fit after self-cal, rms=0.066442Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066442Jy sigma=0.000776 ! Fit after self-cal, rms=0.066443Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=7.65 mas, bpa=-3.054 degrees ! Estimated noise=585.497 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000478724 Jy ! Component: 100 - total flux cleaned = 0.000447675 Jy ! Component: 150 - total flux cleaned = 0.000392726 Jy ! Component: 200 - total flux cleaned = 0.000367379 Jy ! Total flux subtracted in 200 components = 0.000367379 Jy ! Clean residual min=-0.001739 max=0.001748 Jy/beam ! Clean residual mean=-0.000003 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.361456 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 126 components and 0.361456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066417Jy sigma=0.000776 ! Fit after self-cal, rms=0.066417Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.33624e-05 Jy ! Component: 100 - total flux cleaned = 6.43991e-05 Jy ! Component: 150 - total flux cleaned = 6.51716e-05 Jy ! Component: 200 - total flux cleaned = 8.35358e-05 Jy ! Total flux subtracted in 200 components = 8.35358e-05 Jy ! Clean residual min=-0.001727 max=0.001740 Jy/beam ! Clean residual mean=-0.000003 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.361539 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 138 components and 0.361539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066405Jy sigma=0.000776 ! Fit after self-cal, rms=0.066406Jy sigma=0.000776 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066406Jy sigma=0.000776 ! Fit after self-cal, rms=0.066393Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.352 mas, bmaj=11.26 mas, bpa=-4.093 degrees ! Estimated noise=722.256 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.67556e-05 Jy ! Component: 100 - total flux cleaned = -7.05896e-05 Jy ! Component: 150 - total flux cleaned = -1.84641e-06 Jy ! Component: 200 - total flux cleaned = 4.50948e-05 Jy ! Total flux subtracted in 200 components = 4.50948e-05 Jy ! Clean residual min=-0.001812 max=0.001806 Jy/beam ! Clean residual mean=-0.000005 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.361584 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 156 components and 0.361584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066388Jy sigma=0.000776 ! Fit after self-cal, rms=0.066388Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114351 Jy ! Component: 100 - total flux cleaned = -4.61397e-05 Jy ! Component: 150 - total flux cleaned = -7.61241e-06 Jy ! Component: 200 - total flux cleaned = 2.61282e-05 Jy ! Total flux subtracted in 200 components = 2.61282e-05 Jy ! Clean residual min=-0.001798 max=0.001776 Jy/beam ! Clean residual mean=-0.000006 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.36161 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 169 components and 0.36161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066387Jy sigma=0.000776 ! Fit after self-cal, rms=0.066387Jy sigma=0.000776 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=7.65 mas, bpa=-3.023 degrees ! Estimated noise=585.324 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.255 x 7.65 at -3.023 degrees (North through East) ! Clean map min=-0.001631 max=0.26059 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.653 mas, bmaj=6.741 mas, bpa=-2.799 degrees ! Estimated noise=810.971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.189516 Jy ! Component: 100 - total flux cleaned = 0.260311 Jy ! Component: 150 - total flux cleaned = 0.29622 Jy ! Component: 200 - total flux cleaned = 0.316562 Jy ! Total flux subtracted in 200 components = 0.316562 Jy ! Clean residual min=-0.004108 max=0.010626 Jy/beam ! Clean residual mean=0.000022 rms=0.001354 Jy/beam ! Combined flux in latest and established models = 0.316561 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.316561 Jy ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=7.65 mas, bpa=-3.023 degrees ! Estimated noise=585.324 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.018214 Jy ! Component: 100 - total flux cleaned = 0.0276088 Jy ! Component: 150 - total flux cleaned = 0.032848 Jy ! Component: 200 - total flux cleaned = 0.0363597 Jy ! Total flux subtracted in 200 components = 0.0363597 Jy ! Clean residual min=-0.002341 max=0.002468 Jy/beam ! Clean residual mean=0.000003 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.352921 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 61 components and 0.352921 Jy ! Inverting map ! Added new window around map position (3.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271781 Jy ! Component: 100 - total flux cleaned = 0.00450549 Jy ! Component: 150 - total flux cleaned = 0.00535109 Jy ! Component: 200 - total flux cleaned = 0.00611991 Jy ! Total flux subtracted in 200 components = 0.00611991 Jy ! Clean residual min=-0.001888 max=0.001676 Jy/beam ! Clean residual mean=-0.000001 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.359041 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 93 components and 0.359041 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.352 mas, bmaj=11.26 mas, bpa=-4.093 degrees ! Estimated noise=722.256 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118282 Jy ! Component: 100 - total flux cleaned = 0.00160774 Jy ! Component: 150 - total flux cleaned = 0.00203738 Jy ! Component: 200 - total flux cleaned = 0.00230583 Jy ! Total flux subtracted in 200 components = 0.00230583 Jy ! Clean residual min=-0.001779 max=0.001836 Jy/beam ! Clean residual mean=-0.000005 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.361347 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.45805e-05 Jy ! Component: 100 - total flux cleaned = 0.000178577 Jy ! Component: 150 - total flux cleaned = 0.000230575 Jy ! Component: 200 - total flux cleaned = 0.000278706 Jy ! Total flux subtracted in 200 components = 0.000278706 Jy ! Clean residual min=-0.001759 max=0.001810 Jy/beam ! Clean residual mean=-0.000006 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.361626 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 153 components and 0.361626 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=7.65 mas, bpa=-3.023 degrees ! Estimated noise=585.324 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000192816 Jy ! Component: 100 - total flux cleaned = -6.51663e-05 Jy ! Component: 150 - total flux cleaned = -3.65834e-05 Jy ! Component: 200 - total flux cleaned = -1.20647e-05 Jy ! Total flux subtracted in 200 components = -1.20647e-05 Jy ! Clean residual min=-0.001656 max=0.001706 Jy/beam ! Clean residual mean=-0.000003 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.361614 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 173 components and 0.361613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066388Jy sigma=0.000776 ! Fit after self-cal, rms=0.066381Jy sigma=0.000775 wmodel J1722+1013_S_2014_05_31_pus_map.mod ! Writing 173 model components to file: J1722+1013_S_2014_05_31_pus_map.mod wobs J1722+1013_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J1722+1013_S_2014_05_31_pus_uvs.fits wwins J1722+1013_S_2014_05_31_pus_map.win ! wwins: Wrote 4 windows to J1722+1013_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000508946 Jy ! Component: 100 - total flux cleaned = 0.000981152 Jy ! Component: 150 - total flux cleaned = 0.00134417 Jy ! Component: 200 - total flux cleaned = 0.00150384 Jy ! Component: 250 - total flux cleaned = 0.00163283 Jy ! Component: 300 - total flux cleaned = 0.00170753 Jy ! Component: 350 - total flux cleaned = 0.00185198 Jy ! Component: 400 - total flux cleaned = 0.00192144 Jy ! Component: 450 - total flux cleaned = 0.00198934 Jy ! Component: 500 - total flux cleaned = 0.00201162 Jy ! Component: 550 - total flux cleaned = 0.00205504 Jy ! Component: 600 - total flux cleaned = 0.00213984 Jy ! Component: 650 - total flux cleaned = 0.00211873 Jy ! Component: 700 - total flux cleaned = 0.00213942 Jy ! Component: 750 - total flux cleaned = 0.00211939 Jy ! Component: 800 - total flux cleaned = 0.00211947 Jy ! Component: 850 - total flux cleaned = 0.00209977 Jy ! Component: 900 - total flux cleaned = 0.00208074 Jy ! Component: 950 - total flux cleaned = 0.00213805 Jy ! Component: 1000 - total flux cleaned = 0.00217536 Jy ! Component: 1050 - total flux cleaned = 0.00219359 Jy ! Component: 1100 - total flux cleaned = 0.00223018 Jy ! Component: 1150 - total flux cleaned = 0.00228423 Jy ! Component: 1200 - total flux cleaned = 0.00228433 Jy ! Component: 1250 - total flux cleaned = 0.00231998 Jy ! Component: 1300 - total flux cleaned = 0.00232007 Jy ! Component: 1350 - total flux cleaned = 0.00226828 Jy ! Component: 1400 - total flux cleaned = 0.0023541 Jy ! Component: 1450 - total flux cleaned = 0.00228618 Jy ! Component: 1500 - total flux cleaned = 0.00226935 Jy ! Component: 1550 - total flux cleaned = 0.00225265 Jy ! Component: 1600 - total flux cleaned = 0.002203 Jy ! Component: 1650 - total flux cleaned = 0.00217007 Jy ! Component: 1700 - total flux cleaned = 0.00220251 Jy ! Component: 1750 - total flux cleaned = 0.00213809 Jy ! Component: 1800 - total flux cleaned = 0.00217025 Jy ! Component: 1850 - total flux cleaned = 0.00217013 Jy ! Component: 1900 - total flux cleaned = 0.00212329 Jy ! Component: 1950 - total flux cleaned = 0.00213888 Jy ! Component: 2000 - total flux cleaned = 0.00212341 Jy ! Component: 2050 - total flux cleaned = 0.00213858 Jy ! Component: 2100 - total flux cleaned = 0.0020628 Jy ! Component: 2150 - total flux cleaned = 0.00209295 Jy ! Component: 2200 - total flux cleaned = 0.00209274 Jy ! Component: 2250 - total flux cleaned = 0.00209273 Jy ! Component: 2300 - total flux cleaned = 0.00209275 Jy ! Component: 2350 - total flux cleaned = 0.00207829 Jy ! Component: 2400 - total flux cleaned = 0.00202054 Jy ! Component: 2450 - total flux cleaned = 0.0020491 Jy ! Component: 2500 - total flux cleaned = 0.00200639 Jy ! Component: 2550 - total flux cleaned = 0.00197836 Jy ! Component: 2600 - total flux cleaned = 0.00203435 Jy ! Component: 2650 - total flux cleaned = 0.0019652 Jy ! Component: 2700 - total flux cleaned = 0.00193776 Jy ! Component: 2750 - total flux cleaned = 0.00197869 Jy ! Component: 2800 - total flux cleaned = 0.00196492 Jy ! Component: 2850 - total flux cleaned = 0.00191111 Jy ! Component: 2900 - total flux cleaned = 0.00191112 Jy ! Component: 2950 - total flux cleaned = 0.00188438 Jy ! Component: 3000 - total flux cleaned = 0.0018843 Jy ! Component: 3050 - total flux cleaned = 0.00184527 Jy ! Component: 3100 - total flux cleaned = 0.00181945 Jy ! Component: 3150 - total flux cleaned = 0.00178084 Jy ! Component: 3200 - total flux cleaned = 0.00178089 Jy ! Component: 3250 - total flux cleaned = 0.00175568 Jy ! Component: 3300 - total flux cleaned = 0.00174317 Jy ! Component: 3350 - total flux cleaned = 0.00176836 Jy ! Component: 3400 - total flux cleaned = 0.00181813 Jy ! Component: 3450 - total flux cleaned = 0.00175643 Jy ! Component: 3500 - total flux cleaned = 0.00173198 Jy ! Component: 3550 - total flux cleaned = 0.00171974 Jy ! Component: 3600 - total flux cleaned = 0.00173183 Jy ! Component: 3650 - total flux cleaned = 0.00171986 Jy ! Component: 3700 - total flux cleaned = 0.00174381 Jy ! Component: 3750 - total flux cleaned = 0.00170819 Jy ! Component: 3800 - total flux cleaned = 0.00172003 Jy ! Component: 3850 - total flux cleaned = 0.00172 Jy ! Component: 3900 - total flux cleaned = 0.00173179 Jy ! Component: 3950 - total flux cleaned = 0.00173183 Jy ! Component: 4000 - total flux cleaned = 0.00174329 Jy ! Component: 4050 - total flux cleaned = 0.00170899 Jy ! Total flux subtracted in 4096 components = 0.00164084 Jy ! Clean residual min=-0.000647 max=0.000616 Jy/beam ! Clean residual mean=-0.000001 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.363254 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 470 components and 0.363254 Jy ![Exited script file: muppet] wmap "J1722+1013_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.255 x 7.65 at -3.023 degrees (North through East) ! Clean map min=-0.0013453 max=0.26079 Jy/beam ! Writing clean map to FITS file: J1722+1013_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.260791 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000203961 device "J1722+1013_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J1722+1013_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.234626 0.234626 0.469252 0.938504 1.87701 3.75402 7.50803 15.0161 30.0321 60.0643 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.26 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.255 x 7.65 at -3.023 degrees (North through East) ! Clean map min=-0.0013453 max=0.26079 Jy/beam quit ! Quitting program ! Log file J1722+1013_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:33:08 2016