! Started logfile: J1635+6019_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:32:30 2016 obs J1635+6019_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J1635+6019_S_2014_05_31_pus_uva.fits ! AN table 1: 103 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.878101 visibilities/baseline/integration-bin. ! Found source: J1635+6019 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 16280 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1635+6019_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.806994Jy sigma=0.009433 ! Fit after self-cal, rms=0.774497Jy sigma=0.009043 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=6.07 mas, bpa=-78.64 degrees ! Estimated noise=896.552 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.166884 Jy ! Component: 100 - total flux cleaned = 0.215115 Jy ! Total flux subtracted in 100 components = 0.215115 Jy ! Clean residual min=-0.009423 max=0.025396 Jy/beam ! Clean residual mean=-0.000121 rms=0.002807 Jy/beam ! Combined flux in latest and established models = 0.215115 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.215115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090758Jy sigma=0.001006 ! Fit after self-cal, rms=0.090733Jy sigma=0.001006 ! Inverting map ! Added new window around map position (2, 8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0254238 Jy ! Component: 100 - total flux cleaned = 0.0409361 Jy ! Total flux subtracted in 100 components = 0.0409361 Jy ! Clean residual min=-0.006148 max=0.009366 Jy/beam ! Clean residual mean=-0.000087 rms=0.001784 Jy/beam ! Combined flux in latest and established models = 0.256052 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 26 components and 0.256052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080504Jy sigma=0.000879 ! Fit after self-cal, rms=0.080139Jy sigma=0.000874 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118844 Jy ! Component: 100 - total flux cleaned = 0.0201871 Jy ! Total flux subtracted in 100 components = 0.0201871 Jy ! Clean residual min=-0.005563 max=0.006006 Jy/beam ! Clean residual mean=-0.000069 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 0.276239 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 49 components and 0.276239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077240Jy sigma=0.000839 ! Fit after self-cal, rms=0.077138Jy sigma=0.000838 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=6.98 mas, bpa=-79.88 degrees ! Estimated noise=481.837 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104634 Jy ! Component: 100 - total flux cleaned = 0.0172135 Jy ! Component: 150 - total flux cleaned = 0.0220853 Jy ! Component: 200 - total flux cleaned = 0.0256601 Jy ! Total flux subtracted in 200 components = 0.0256601 Jy ! Clean residual min=-0.003706 max=0.004164 Jy/beam ! Clean residual mean=0.000009 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.301899 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 106 components and 0.301899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075315Jy sigma=0.000819 ! Fit after self-cal, rms=0.075234Jy sigma=0.000818 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.84 HN 0.98 KP 1.03 ! LA 1.14 MK 1.01 NL 0.97 OV 0.97 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.03 KP 1.00 ! LA 1.11 MK 0.99 NL 1.02 OV 1.01 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.15 HN 1.03 KP 0.91 ! LA 0.90 MK 1.00 NL 0.99 OV 0.94 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 1.02 KP 0.88 ! LA 0.87 MK 1.01 NL 1.08 OV 1.03 ! PT 1.01 SC 1.01 ! ! ! Fit before self-cal, rms=0.075234Jy sigma=0.000818 ! Fit after self-cal, rms=0.070596Jy sigma=0.000774 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.791 mas, bmaj=7.006 mas, bpa=-79.92 degrees ! Estimated noise=479.013 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234421 Jy ! Component: 100 - total flux cleaned = 0.00346593 Jy ! Component: 150 - total flux cleaned = 0.00386633 Jy ! Component: 200 - total flux cleaned = 0.00411347 Jy ! Total flux subtracted in 200 components = 0.00411347 Jy ! Clean residual min=-0.001339 max=0.001603 Jy/beam ! Clean residual mean=0.000002 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.306012 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 135 components and 0.306012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070514Jy sigma=0.000773 ! Fit after self-cal, rms=0.070500Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070500Jy sigma=0.000772 ! Fit after self-cal, rms=0.070678Jy sigma=0.000772 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.79 mas, bmaj=6.992 mas, bpa=-80.08 degrees ! Estimated noise=479.344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105235 Jy ! Component: 100 - total flux cleaned = 0.00156423 Jy ! Component: 150 - total flux cleaned = 0.00166779 Jy ! Component: 200 - total flux cleaned = 0.00178882 Jy ! Total flux subtracted in 200 components = 0.00178882 Jy ! Clean residual min=-0.001272 max=0.001412 Jy/beam ! Clean residual mean=-0.000001 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.307801 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 154 components and 0.307801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070658Jy sigma=0.000771 ! Fit after self-cal, rms=0.070658Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000201977 Jy ! Component: 100 - total flux cleaned = 0.00029633 Jy ! Component: 150 - total flux cleaned = 0.000375664 Jy ! Component: 200 - total flux cleaned = 0.00043424 Jy ! Total flux subtracted in 200 components = 0.00043424 Jy ! Clean residual min=-0.001271 max=0.001358 Jy/beam ! Clean residual mean=-0.000001 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.308235 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 162 components and 0.308235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070652Jy sigma=0.000771 ! Fit after self-cal, rms=0.070651Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070651Jy sigma=0.000771 ! Fit after self-cal, rms=0.070626Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.789 mas, bmaj=6.989 mas, bpa=-80.13 degrees ! Estimated noise=479.233 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000558535 Jy ! Component: 100 - total flux cleaned = 0.00069118 Jy ! Component: 150 - total flux cleaned = 0.000790932 Jy ! Component: 200 - total flux cleaned = 0.000887411 Jy ! Total flux subtracted in 200 components = 0.000887411 Jy ! Clean residual min=-0.001284 max=0.001309 Jy/beam ! Clean residual mean=-0.000002 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.309123 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 163 components and 0.309123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070620Jy sigma=0.000771 ! Fit after self-cal, rms=0.070618Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.76713e-05 Jy ! Component: 100 - total flux cleaned = 0.000117552 Jy ! Component: 150 - total flux cleaned = 0.000135546 Jy ! Component: 200 - total flux cleaned = 0.000152313 Jy ! Total flux subtracted in 200 components = 0.000152313 Jy ! Clean residual min=-0.001280 max=0.001297 Jy/beam ! Clean residual mean=-0.000001 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.309275 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 171 components and 0.309275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070616Jy sigma=0.000771 ! Fit after self-cal, rms=0.070615Jy sigma=0.000771 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070615Jy sigma=0.000771 ! Fit after self-cal, rms=0.070591Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.855 mas, bmaj=11.1 mas, bpa=86.56 degrees ! Estimated noise=568.388 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00027934 Jy ! Component: 100 - total flux cleaned = 0.000356413 Jy ! Component: 150 - total flux cleaned = 0.00037695 Jy ! Component: 200 - total flux cleaned = 0.000402035 Jy ! Total flux subtracted in 200 components = 0.000402035 Jy ! Clean residual min=-0.001367 max=0.001479 Jy/beam ! Clean residual mean=-0.000004 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.309677 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 187 components and 0.309677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070590Jy sigma=0.000771 ! Fit after self-cal, rms=0.070590Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.10095e-05 Jy ! Component: 100 - total flux cleaned = 4.32599e-05 Jy ! Component: 150 - total flux cleaned = 5.04453e-05 Jy ! Component: 200 - total flux cleaned = 5.0568e-05 Jy ! Total flux subtracted in 200 components = 5.0568e-05 Jy ! Clean residual min=-0.001368 max=0.001477 Jy/beam ! Clean residual mean=-0.000004 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.309728 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 195 components and 0.309728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070590Jy sigma=0.000771 ! Fit after self-cal, rms=0.070590Jy sigma=0.000771 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.787 mas, bmaj=6.987 mas, bpa=-80.15 degrees ! Estimated noise=479.141 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.787 x 6.987 at -80.15 degrees (North through East) ! Clean map min=-0.0012024 max=0.21588 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=6.061 mas, bpa=-78.98 degrees ! Estimated noise=893.749 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.165918 Jy ! Component: 100 - total flux cleaned = 0.215275 Jy ! Component: 150 - total flux cleaned = 0.24137 Jy ! Component: 200 - total flux cleaned = 0.258017 Jy ! Total flux subtracted in 200 components = 0.258017 Jy ! Clean residual min=-0.004674 max=0.009064 Jy/beam ! Clean residual mean=-0.000074 rms=0.001429 Jy/beam ! Combined flux in latest and established models = 0.258017 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.258017 Jy ! Inverting map and beam ! Estimated beam: bmin=3.787 mas, bmaj=6.987 mas, bpa=-80.15 degrees ! Estimated noise=479.141 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165086 Jy ! Component: 100 - total flux cleaned = 0.0266006 Jy ! Component: 150 - total flux cleaned = 0.0333064 Jy ! Component: 200 - total flux cleaned = 0.0379884 Jy ! Total flux subtracted in 200 components = 0.0379884 Jy ! Clean residual min=-0.001894 max=0.002626 Jy/beam ! Clean residual mean=-0.000016 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.296005 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 85 components and 0.296005 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337316 Jy ! Component: 100 - total flux cleaned = 0.00587183 Jy ! Component: 150 - total flux cleaned = 0.00776205 Jy ! Component: 200 - total flux cleaned = 0.0092043 Jy ! Total flux subtracted in 200 components = 0.0092043 Jy ! Clean residual min=-0.001399 max=0.001299 Jy/beam ! Clean residual mean=-0.000006 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.30521 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 131 components and 0.30521 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.855 mas, bmaj=11.1 mas, bpa=86.56 degrees ! Estimated noise=568.388 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164869 Jy ! Component: 100 - total flux cleaned = 0.00268242 Jy ! Component: 150 - total flux cleaned = 0.00336095 Jy ! Component: 200 - total flux cleaned = 0.00381336 Jy ! Total flux subtracted in 200 components = 0.00381336 Jy ! Clean residual min=-0.001412 max=0.001502 Jy/beam ! Clean residual mean=-0.000005 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.309023 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000302559 Jy ! Component: 100 - total flux cleaned = 0.000478427 Jy ! Component: 150 - total flux cleaned = 0.000531308 Jy ! Component: 200 - total flux cleaned = 0.000583505 Jy ! Total flux subtracted in 200 components = 0.000583505 Jy ! Clean residual min=-0.001374 max=0.001512 Jy/beam ! Clean residual mean=-0.000004 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.309606 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 165 components and 0.309606 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.787 mas, bmaj=6.987 mas, bpa=-80.15 degrees ! Estimated noise=479.141 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013392 Jy ! Component: 100 - total flux cleaned = -0.000116501 Jy ! Component: 150 - total flux cleaned = -0.000130709 Jy ! Component: 200 - total flux cleaned = -0.000129825 Jy ! Total flux subtracted in 200 components = -0.000129825 Jy ! Clean residual min=-0.001249 max=0.001320 Jy/beam ! Clean residual mean=-0.000002 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.309477 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 182 components and 0.309477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070588Jy sigma=0.000771 ! Fit after self-cal, rms=0.070586Jy sigma=0.000771 wmodel J1635+6019_S_2014_05_31_pus_map.mod ! Writing 182 model components to file: J1635+6019_S_2014_05_31_pus_map.mod wobs J1635+6019_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J1635+6019_S_2014_05_31_pus_uvs.fits wwins J1635+6019_S_2014_05_31_pus_map.win ! wwins: Wrote 3 windows to J1635+6019_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215769 Jy ! Component: 100 - total flux cleaned = 0.000217032 Jy ! Component: 150 - total flux cleaned = 7.5229e-05 Jy ! Component: 200 - total flux cleaned = -7.98001e-05 Jy ! Component: 250 - total flux cleaned = -0.000192543 Jy ! Component: 300 - total flux cleaned = -0.000265804 Jy ! Component: 350 - total flux cleaned = -0.00039007 Jy ! Component: 400 - total flux cleaned = -0.000424893 Jy ! Component: 450 - total flux cleaned = -0.000476118 Jy ! Component: 500 - total flux cleaned = -0.000525786 Jy ! Component: 550 - total flux cleaned = -0.000493467 Jy ! Component: 600 - total flux cleaned = -0.000588949 Jy ! Component: 650 - total flux cleaned = -0.000557401 Jy ! Component: 700 - total flux cleaned = -0.00061923 Jy ! Component: 750 - total flux cleaned = -0.000619046 Jy ! Component: 800 - total flux cleaned = -0.000678198 Jy ! Component: 850 - total flux cleaned = -0.000634275 Jy ! Component: 900 - total flux cleaned = -0.000677529 Jy ! Component: 950 - total flux cleaned = -0.000691569 Jy ! Component: 1000 - total flux cleaned = -0.000733524 Jy ! Component: 1050 - total flux cleaned = -0.000733433 Jy ! Component: 1100 - total flux cleaned = -0.000774214 Jy ! Component: 1150 - total flux cleaned = -0.000733746 Jy ! Component: 1200 - total flux cleaned = -0.000760284 Jy ! Component: 1250 - total flux cleaned = -0.000773277 Jy ! Component: 1300 - total flux cleaned = -0.000785999 Jy ! Component: 1350 - total flux cleaned = -0.000773101 Jy ! Component: 1400 - total flux cleaned = -0.000773057 Jy ! Component: 1450 - total flux cleaned = -0.000747939 Jy ! Component: 1500 - total flux cleaned = -0.000760173 Jy ! Component: 1550 - total flux cleaned = -0.000711158 Jy ! Component: 1600 - total flux cleaned = -0.000687099 Jy ! Component: 1650 - total flux cleaned = -0.000663251 Jy ! Component: 1700 - total flux cleaned = -0.000651531 Jy ! Component: 1750 - total flux cleaned = -0.000628096 Jy ! Component: 1800 - total flux cleaned = -0.000570018 Jy ! Component: 1850 - total flux cleaned = -0.00053557 Jy ! Component: 1900 - total flux cleaned = -0.000512608 Jy ! Component: 1950 - total flux cleaned = -0.000456117 Jy ! Component: 2000 - total flux cleaned = -0.000422313 Jy ! Component: 2050 - total flux cleaned = -0.000388989 Jy ! Component: 2100 - total flux cleaned = -0.000344799 Jy ! Component: 2150 - total flux cleaned = -0.000301079 Jy ! Component: 2200 - total flux cleaned = -0.000257754 Jy ! Component: 2250 - total flux cleaned = -0.00025776 Jy ! Component: 2300 - total flux cleaned = -0.000225726 Jy ! Component: 2350 - total flux cleaned = -0.000236435 Jy ! Component: 2400 - total flux cleaned = -0.000247088 Jy ! Component: 2450 - total flux cleaned = -0.000257423 Jy ! Component: 2500 - total flux cleaned = -0.000278045 Jy ! Component: 2550 - total flux cleaned = -0.000267831 Jy ! Component: 2600 - total flux cleaned = -0.000237247 Jy ! Component: 2650 - total flux cleaned = -0.000247272 Jy ! Component: 2700 - total flux cleaned = -0.000247253 Jy ! Component: 2750 - total flux cleaned = -0.000227445 Jy ! Component: 2800 - total flux cleaned = -0.000266841 Jy ! Component: 2850 - total flux cleaned = -0.000266751 Jy ! Component: 2900 - total flux cleaned = -0.000237803 Jy ! Component: 2950 - total flux cleaned = -0.000295501 Jy ! Component: 3000 - total flux cleaned = -0.000333615 Jy ! Component: 3050 - total flux cleaned = -0.000333592 Jy ! Component: 3100 - total flux cleaned = -0.000305447 Jy ! Component: 3150 - total flux cleaned = -0.000305557 Jy ! Component: 3200 - total flux cleaned = -0.000305725 Jy ! Component: 3250 - total flux cleaned = -0.000314874 Jy ! Component: 3300 - total flux cleaned = -0.000342389 Jy ! Component: 3350 - total flux cleaned = -0.000342439 Jy ! Component: 3400 - total flux cleaned = -0.000378436 Jy ! Component: 3450 - total flux cleaned = -0.000342621 Jy ! Component: 3500 - total flux cleaned = -0.00034271 Jy ! Component: 3550 - total flux cleaned = -0.00036927 Jy ! Component: 3600 - total flux cleaned = -0.000360475 Jy ! Component: 3650 - total flux cleaned = -0.000360496 Jy ! Component: 3700 - total flux cleaned = -0.000395169 Jy ! Component: 3750 - total flux cleaned = -0.0003866 Jy ! Component: 3800 - total flux cleaned = -0.000395124 Jy ! Component: 3850 - total flux cleaned = -0.00037801 Jy ! Component: 3900 - total flux cleaned = -0.000386437 Jy ! Component: 3950 - total flux cleaned = -0.000411641 Jy ! Component: 4000 - total flux cleaned = -0.000403263 Jy ! Component: 4050 - total flux cleaned = -0.000386674 Jy ! Total flux subtracted in 4096 components = -0.000370193 Jy ! Clean residual min=-0.000498 max=0.000501 Jy/beam ! Clean residual mean=-0.000001 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.309106 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 479 components and 0.309106 Jy ![Exited script file: muppet] wmap "J1635+6019_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.787 x 6.987 at -80.15 degrees (North through East) ! Clean map min=-0.0010625 max=0.21573 Jy/beam ! Writing clean map to FITS file: J1635+6019_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.215729 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00015015 device "J1635+6019_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J1635+6019_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.208804 0.208804 0.417608 0.835215 1.67043 3.34086 6.68172 13.3634 26.7269 53.4538 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.215 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.787 x 6.987 at -80.15 degrees (North through East) ! Clean map min=-0.0010625 max=0.21573 Jy/beam quit ! Quitting program ! Log file J1635+6019_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:32:35 2016