! Started logfile: J1542+6129_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:30:52 2016 obs J1542+6129_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J1542+6129_S_2014_05_31_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.780754 visibilities/baseline/integration-bin. ! Found source: J1542+6129 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 15740 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1542+6129_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.931859Jy sigma=0.011171 ! Fit after self-cal, rms=0.906251Jy sigma=0.010865 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.938 mas, bmaj=5.586 mas, bpa=89.57 degrees ! Estimated noise=879.356 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0717355 Jy ! Component: 100 - total flux cleaned = 0.0888643 Jy ! Total flux subtracted in 100 components = 0.0888643 Jy ! Clean residual min=-0.003618 max=0.006510 Jy/beam ! Clean residual mean=-0.000023 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.0888643 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0888643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069061Jy sigma=0.000786 ! Fit after self-cal, rms=0.069056Jy sigma=0.000786 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00687257 Jy ! Component: 100 - total flux cleaned = 0.0105477 Jy ! Total flux subtracted in 100 components = 0.0105477 Jy ! Clean residual min=-0.002950 max=0.003493 Jy/beam ! Clean residual mean=-0.000010 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.0994121 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 19 components and 0.0994121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067946Jy sigma=0.000774 ! Fit after self-cal, rms=0.067933Jy sigma=0.000774 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.893 mas, bmaj=6.838 mas, bpa=84.55 degrees ! Estimated noise=475.707 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483101 Jy ! Component: 100 - total flux cleaned = 0.00746608 Jy ! Component: 150 - total flux cleaned = 0.0092182 Jy ! Component: 200 - total flux cleaned = 0.0104435 Jy ! Total flux subtracted in 200 components = 0.0104435 Jy ! Clean residual min=-0.001859 max=0.001802 Jy/beam ! Clean residual mean=0.000007 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.109856 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 47 components and 0.109856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067524Jy sigma=0.000770 ! Fit after self-cal, rms=0.067499Jy sigma=0.000770 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.83 HN 0.96 KP 1.07 ! LA 1.17 MK 1.00 NL 0.97 OV 0.98 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 0.99 KP 0.99 ! LA 1.11 MK 0.98 NL 1.04 OV 1.00 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.12 HN 1.03 KP 0.93 ! LA 0.90 MK 1.05 NL 1.01 OV 0.93 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.96 HN 0.99 KP 0.90 ! LA 0.88 MK 1.00 NL 1.10 OV 0.98 ! PT 1.03 SC 0.97 ! ! ! Fit before self-cal, rms=0.067499Jy sigma=0.000770 ! Fit after self-cal, rms=0.065328Jy sigma=0.000762 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.899 mas, bmaj=6.835 mas, bpa=84.13 degrees ! Estimated noise=472.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000336387 Jy ! Component: 100 - total flux cleaned = 0.000385648 Jy ! Component: 150 - total flux cleaned = 0.000447977 Jy ! Component: 200 - total flux cleaned = 0.000482754 Jy ! Total flux subtracted in 200 components = 0.000482754 Jy ! Clean residual min=-0.001450 max=0.001497 Jy/beam ! Clean residual mean=0.000002 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.110338 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 68 components and 0.110338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065308Jy sigma=0.000762 ! Fit after self-cal, rms=0.065292Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065292Jy sigma=0.000762 ! Fit after self-cal, rms=0.065364Jy sigma=0.000761 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.902 mas, bmaj=6.83 mas, bpa=84.08 degrees ! Estimated noise=472.736 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247437 Jy ! Component: 100 - total flux cleaned = 0.000343624 Jy ! Component: 150 - total flux cleaned = 0.00039071 Jy ! Component: 200 - total flux cleaned = 0.000431321 Jy ! Total flux subtracted in 200 components = 0.000431321 Jy ! Clean residual min=-0.001556 max=0.001544 Jy/beam ! Clean residual mean=-0.000002 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.11077 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.11077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065353Jy sigma=0.000761 ! Fit after self-cal, rms=0.065355Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.48941e-05 Jy ! Component: 100 - total flux cleaned = 4.94749e-05 Jy ! Component: 150 - total flux cleaned = 3.80767e-05 Jy ! Component: 200 - total flux cleaned = 3.82193e-05 Jy ! Total flux subtracted in 200 components = 3.82193e-05 Jy ! Clean residual min=-0.001541 max=0.001548 Jy/beam ! Clean residual mean=-0.000002 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.110808 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 86 components and 0.110808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065350Jy sigma=0.000761 ! Fit after self-cal, rms=0.065349Jy sigma=0.000761 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065349Jy sigma=0.000761 ! Fit after self-cal, rms=0.065391Jy sigma=0.000761 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.903 mas, bmaj=6.825 mas, bpa=84.04 degrees ! Estimated noise=472.864 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174353 Jy ! Component: 100 - total flux cleaned = 0.000208174 Jy ! Component: 150 - total flux cleaned = 0.00021768 Jy ! Component: 200 - total flux cleaned = 0.000235009 Jy ! Total flux subtracted in 200 components = 0.000235009 Jy ! Clean residual min=-0.001543 max=0.001562 Jy/beam ! Clean residual mean=-0.000002 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.111043 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 0.111043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065388Jy sigma=0.000761 ! Fit after self-cal, rms=0.065388Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (55, 83.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000898042 Jy ! Component: 100 - total flux cleaned = 0.00098642 Jy ! Component: 150 - total flux cleaned = 0.0010846 Jy ! Component: 200 - total flux cleaned = 0.00114671 Jy ! Total flux subtracted in 200 components = 0.00114671 Jy ! Clean residual min=-0.001433 max=0.001180 Jy/beam ! Clean residual mean=-0.000001 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.11219 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 117 components and 0.11219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065355Jy sigma=0.000761 ! Fit after self-cal, rms=0.065354Jy sigma=0.000761 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065354Jy sigma=0.000761 ! Fit after self-cal, rms=0.065356Jy sigma=0.000761 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.091 mas, bmaj=11.42 mas, bpa=69.99 degrees ! Estimated noise=568.042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000541313 Jy ! Component: 100 - total flux cleaned = 0.000721306 Jy ! Component: 150 - total flux cleaned = 0.00081247 Jy ! Component: 200 - total flux cleaned = 0.000882751 Jy ! Total flux subtracted in 200 components = 0.000882751 Jy ! Clean residual min=-0.001422 max=0.001127 Jy/beam ! Clean residual mean=-0.000001 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.113072 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 139 components and 0.113072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065353Jy sigma=0.000761 ! Fit after self-cal, rms=0.065353Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.16476e-05 Jy ! Component: 100 - total flux cleaned = 8.23043e-05 Jy ! Component: 150 - total flux cleaned = 0.000101952 Jy ! Component: 200 - total flux cleaned = 0.000120307 Jy ! Total flux subtracted in 200 components = 0.000120307 Jy ! Clean residual min=-0.001409 max=0.001111 Jy/beam ! Clean residual mean=-0.000001 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.113193 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 151 components and 0.113193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065353Jy sigma=0.000761 ! Fit after self-cal, rms=0.065353Jy sigma=0.000761 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.905 mas, bmaj=6.823 mas, bpa=83.98 degrees ! Estimated noise=472.698 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.905 x 6.823 at 83.98 degrees (North through East) ! Clean map min=-0.0013499 max=0.092689 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=5.541 mas, bpa=88.98 degrees ! Estimated noise=875.738 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.070994 Jy ! Component: 100 - total flux cleaned = 0.0893127 Jy ! Component: 150 - total flux cleaned = 0.0968394 Jy ! Component: 200 - total flux cleaned = 0.100661 Jy ! Total flux subtracted in 200 components = 0.100661 Jy ! Clean residual min=-0.002595 max=0.002434 Jy/beam ! Clean residual mean=-0.000013 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.100661 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.100661 Jy ! Inverting map and beam ! Estimated beam: bmin=3.905 mas, bmaj=6.823 mas, bpa=83.98 degrees ! Estimated noise=472.698 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00406686 Jy ! Component: 100 - total flux cleaned = 0.00637976 Jy ! Component: 150 - total flux cleaned = 0.00805908 Jy ! Component: 200 - total flux cleaned = 0.00924027 Jy ! Total flux subtracted in 200 components = 0.00924027 Jy ! Clean residual min=-0.001609 max=0.001251 Jy/beam ! Clean residual mean=-0.000008 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.109901 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 52 components and 0.109901 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.091 mas, bmaj=11.42 mas, bpa=69.99 degrees ! Estimated noise=568.042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121245 Jy ! Component: 100 - total flux cleaned = 0.0020149 Jy ! Component: 150 - total flux cleaned = 0.00240743 Jy ! Component: 200 - total flux cleaned = 0.00261684 Jy ! Total flux subtracted in 200 components = 0.00261684 Jy ! Clean residual min=-0.001557 max=0.001079 Jy/beam ! Clean residual mean=-0.000004 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.112518 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014742 Jy ! Component: 100 - total flux cleaned = 0.000215202 Jy ! Component: 150 - total flux cleaned = 0.000293715 Jy ! Component: 200 - total flux cleaned = 0.000365471 Jy ! Total flux subtracted in 200 components = 0.000365471 Jy ! Clean residual min=-0.001516 max=0.001069 Jy/beam ! Clean residual mean=-0.000003 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.112883 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 97 components and 0.112883 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.905 mas, bmaj=6.823 mas, bpa=83.98 degrees ! Estimated noise=472.698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000157022 Jy ! Component: 100 - total flux cleaned = -0.000106239 Jy ! Component: 150 - total flux cleaned = -0.000106877 Jy ! Component: 200 - total flux cleaned = -4.77245e-05 Jy ! Total flux subtracted in 200 components = -4.77245e-05 Jy ! Clean residual min=-0.001436 max=0.001182 Jy/beam ! Clean residual mean=-0.000001 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.112836 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 116 components and 0.112836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065355Jy sigma=0.000761 ! Fit after self-cal, rms=0.065353Jy sigma=0.000761 wmodel J1542+6129_S_2014_05_31_pus_map.mod ! Writing 116 model components to file: J1542+6129_S_2014_05_31_pus_map.mod wobs J1542+6129_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J1542+6129_S_2014_05_31_pus_uvs.fits wwins J1542+6129_S_2014_05_31_pus_map.win ! wwins: Wrote 3 windows to J1542+6129_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000580895 Jy ! Component: 100 - total flux cleaned = -0.000754078 Jy ! Component: 150 - total flux cleaned = -0.000735159 Jy ! Component: 200 - total flux cleaned = -0.000622463 Jy ! Component: 250 - total flux cleaned = -0.000515052 Jy ! Component: 300 - total flux cleaned = -0.000497831 Jy ! Component: 350 - total flux cleaned = -0.000514547 Jy ! Component: 400 - total flux cleaned = -0.000563038 Jy ! Component: 450 - total flux cleaned = -0.00061013 Jy ! Component: 500 - total flux cleaned = -0.00064107 Jy ! Component: 550 - total flux cleaned = -0.00065641 Jy ! Component: 600 - total flux cleaned = -0.000686144 Jy ! Component: 650 - total flux cleaned = -0.000700873 Jy ! Component: 700 - total flux cleaned = -0.000729645 Jy ! Component: 750 - total flux cleaned = -0.000799754 Jy ! Component: 800 - total flux cleaned = -0.000785899 Jy ! Component: 850 - total flux cleaned = -0.000826447 Jy ! Component: 900 - total flux cleaned = -0.000813071 Jy ! Component: 950 - total flux cleaned = -0.000839582 Jy ! Component: 1000 - total flux cleaned = -0.000852751 Jy ! Component: 1050 - total flux cleaned = -0.000891069 Jy ! Component: 1100 - total flux cleaned = -0.000903504 Jy ! Component: 1150 - total flux cleaned = -0.000928218 Jy ! Component: 1200 - total flux cleaned = -0.00096485 Jy ! Component: 1250 - total flux cleaned = -0.00100083 Jy ! Component: 1300 - total flux cleaned = -0.00102454 Jy ! Component: 1350 - total flux cleaned = -0.00105942 Jy ! Component: 1400 - total flux cleaned = -0.00105926 Jy ! Component: 1450 - total flux cleaned = -0.00109329 Jy ! Component: 1500 - total flux cleaned = -0.00111562 Jy ! Component: 1550 - total flux cleaned = -0.00111546 Jy ! Component: 1600 - total flux cleaned = -0.00117015 Jy ! Component: 1650 - total flux cleaned = -0.00118081 Jy ! Component: 1700 - total flux cleaned = -0.0012128 Jy ! Component: 1750 - total flux cleaned = -0.00124454 Jy ! Component: 1800 - total flux cleaned = -0.00130713 Jy ! Component: 1850 - total flux cleaned = -0.00134838 Jy ! Component: 1900 - total flux cleaned = -0.00140984 Jy ! Component: 1950 - total flux cleaned = -0.00147055 Jy ! Component: 2000 - total flux cleaned = -0.00151065 Jy ! Component: 2050 - total flux cleaned = -0.0015603 Jy ! Component: 2100 - total flux cleaned = -0.00161925 Jy ! Component: 2150 - total flux cleaned = -0.00164861 Jy ! Component: 2200 - total flux cleaned = -0.00171604 Jy ! Component: 2250 - total flux cleaned = -0.00171605 Jy ! Component: 2300 - total flux cleaned = -0.00174444 Jy ! Component: 2350 - total flux cleaned = -0.00175376 Jy ! Component: 2400 - total flux cleaned = -0.00178171 Jy ! Component: 2450 - total flux cleaned = -0.0017908 Jy ! Component: 2500 - total flux cleaned = -0.00179078 Jy ! Component: 2550 - total flux cleaned = -0.00182709 Jy ! Component: 2600 - total flux cleaned = -0.00180915 Jy ! Component: 2650 - total flux cleaned = -0.00182702 Jy ! Component: 2700 - total flux cleaned = -0.00186225 Jy ! Component: 2750 - total flux cleaned = -0.00183588 Jy ! Component: 2800 - total flux cleaned = -0.00186209 Jy ! Component: 2850 - total flux cleaned = -0.00187069 Jy ! Component: 2900 - total flux cleaned = -0.0018706 Jy ! Component: 2950 - total flux cleaned = -0.00186205 Jy ! Component: 3000 - total flux cleaned = -0.00184515 Jy ! Component: 3050 - total flux cleaned = -0.00186193 Jy ! Component: 3100 - total flux cleaned = -0.00187846 Jy ! Component: 3150 - total flux cleaned = -0.00183719 Jy ! Component: 3200 - total flux cleaned = -0.00184539 Jy ! Component: 3250 - total flux cleaned = -0.0018374 Jy ! Component: 3300 - total flux cleaned = -0.00185351 Jy ! Component: 3350 - total flux cleaned = -0.00186151 Jy ! Component: 3400 - total flux cleaned = -0.00186938 Jy ! Component: 3450 - total flux cleaned = -0.00185355 Jy ! Component: 3500 - total flux cleaned = -0.00184578 Jy ! Component: 3550 - total flux cleaned = -0.00183017 Jy ! Component: 3600 - total flux cleaned = -0.00183794 Jy ! Component: 3650 - total flux cleaned = -0.00183024 Jy ! Component: 3700 - total flux cleaned = -0.00183787 Jy ! Component: 3750 - total flux cleaned = -0.00182261 Jy ! Component: 3800 - total flux cleaned = -0.00181505 Jy ! Component: 3850 - total flux cleaned = -0.00180756 Jy ! Component: 3900 - total flux cleaned = -0.00180011 Jy ! Component: 3950 - total flux cleaned = -0.00181499 Jy ! Component: 4000 - total flux cleaned = -0.00181492 Jy ! Component: 4050 - total flux cleaned = -0.00177106 Jy ! Total flux subtracted in 4096 components = -0.00176382 Jy ! Clean residual min=-0.000497 max=0.000455 Jy/beam ! Clean residual mean=0.000002 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.111072 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 376 components and 0.111072 Jy ![Exited script file: muppet] wmap "J1542+6129_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.905 x 6.823 at 83.98 degrees (North through East) ! Clean map min=-0.0010802 max=0.092424 Jy/beam ! Writing clean map to FITS file: J1542+6129_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0924242 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000129775 device "J1542+6129_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J1542+6129_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.421237 0.421237 0.842475 1.68495 3.3699 6.7398 13.4796 26.9592 53.9184 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.092 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.905 x 6.823 at 83.98 degrees (North through East) ! Clean map min=-0.0010802 max=0.092424 Jy/beam quit ! Quitting program ! Log file J1542+6129_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:30:57 2016