! Started logfile: J1532-3732_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:30:35 2016 obs J1532-3732_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J1532-3732_S_2014_05_31_pus_uva.fits ! AN table 1: 124 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.693369 visibilities/baseline/integration-bin. ! Found source: J1532-3732 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 15476 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1532-3732_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 206 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 327 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 206 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.955494Jy sigma=0.007890 ! Fit after self-cal, rms=0.916990Jy sigma=0.007612 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.376 mas, bmaj=6.297 mas, bpa=-3.932 degrees ! Estimated noise=1246.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.058562 Jy ! Component: 100 - total flux cleaned = 0.0823931 Jy ! Total flux subtracted in 100 components = 0.0823931 Jy ! Clean residual min=-0.007413 max=0.014125 Jy/beam ! Clean residual mean=-0.000192 rms=0.002337 Jy/beam ! Combined flux in latest and established models = 0.0823931 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.0823931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107615Jy sigma=0.000854 ! Fit after self-cal, rms=0.107354Jy sigma=0.000852 ! Inverting map ! Added new window around map position (-3, -1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166473 Jy ! Component: 100 - total flux cleaned = 0.0278929 Jy ! Total flux subtracted in 100 components = 0.0278929 Jy ! Clean residual min=-0.005371 max=0.010357 Jy/beam ! Clean residual mean=-0.000135 rms=0.001686 Jy/beam ! Combined flux in latest and established models = 0.110286 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 59 components and 0.110286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102820Jy sigma=0.000806 ! Fit after self-cal, rms=0.102697Jy sigma=0.000805 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.626 mas, bpa=-4.106 degrees ! Estimated noise=725.092 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164068 Jy ! Component: 100 - total flux cleaned = 0.0258733 Jy ! Component: 150 - total flux cleaned = 0.0317861 Jy ! Component: 200 - total flux cleaned = 0.0355824 Jy ! Total flux subtracted in 200 components = 0.0355824 Jy ! Clean residual min=-0.004248 max=0.008963 Jy/beam ! Clean residual mean=-0.000055 rms=0.001504 Jy/beam ! Combined flux in latest and established models = 0.145868 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 114 components and 0.145868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100126Jy sigma=0.000779 ! Fit after self-cal, rms=0.099794Jy sigma=0.000776 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.79 HN 1.00* KP 1.03 ! LA 1.14 MK 1.00 NL 1.22 OV 0.98 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.94 HN 1.00* KP 0.97 ! LA 1.18 MK 0.96 NL 1.28 OV 1.02 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.06 HN 1.00* KP 0.89 ! LA 0.94 MK 0.96 NL 1.00* OV 0.95 ! PT 0.90 SC 0.96 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 0.95 HN 1.00* KP 0.91 ! LA 0.87 MK 1.00 NL 1.41 OV 0.98 ! PT 0.98 SC 0.97 ! ! ! Fit before self-cal, rms=0.099794Jy sigma=0.000776 ! Fit after self-cal, rms=0.104029Jy sigma=0.000767 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=7.621 mas, bpa=-4.024 degrees ! Estimated noise=719.345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -48). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00590671 Jy ! Component: 100 - total flux cleaned = 0.00761464 Jy ! Component: 150 - total flux cleaned = 0.00838923 Jy ! Component: 200 - total flux cleaned = 0.00879095 Jy ! Total flux subtracted in 200 components = 0.00879095 Jy ! Clean residual min=-0.002794 max=0.003861 Jy/beam ! Clean residual mean=-0.000039 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.154659 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 153 components and 0.154659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103703Jy sigma=0.000764 ! Fit after self-cal, rms=0.103760Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103760Jy sigma=0.000762 ! Fit after self-cal, rms=0.103143Jy sigma=0.000761 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.933 mas, bmaj=7.581 mas, bpa=-3.8 degrees ! Estimated noise=713.929 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288477 Jy ! Component: 100 - total flux cleaned = 0.00369282 Jy ! Component: 150 - total flux cleaned = 0.00410205 Jy ! Component: 200 - total flux cleaned = 0.00431641 Jy ! Total flux subtracted in 200 components = 0.00431641 Jy ! Clean residual min=-0.002511 max=0.003108 Jy/beam ! Clean residual mean=-0.000017 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.158976 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 185 components and 0.158976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103050Jy sigma=0.000761 ! Fit after self-cal, rms=0.103000Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152751 Jy ! Component: 100 - total flux cleaned = 0.00181651 Jy ! Component: 150 - total flux cleaned = 0.00197972 Jy ! Component: 200 - total flux cleaned = 0.00215903 Jy ! Total flux subtracted in 200 components = 0.00215903 Jy ! Clean residual min=-0.002438 max=0.002965 Jy/beam ! Clean residual mean=-0.000010 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.161135 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 197 components and 0.161135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102954Jy sigma=0.000760 ! Fit after self-cal, rms=0.102920Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102920Jy sigma=0.000760 ! Fit after self-cal, rms=0.101763Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=7.535 mas, bpa=-3.819 degrees ! Estimated noise=709.945 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133975 Jy ! Component: 100 - total flux cleaned = 0.00167381 Jy ! Component: 150 - total flux cleaned = 0.00188561 Jy ! Component: 200 - total flux cleaned = 0.00204332 Jy ! Total flux subtracted in 200 components = 0.00204332 Jy ! Clean residual min=-0.002422 max=0.002819 Jy/beam ! Clean residual mean=-0.000003 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.163178 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 204 components and 0.163178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101726Jy sigma=0.000759 ! Fit after self-cal, rms=0.101691Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19.5, -28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261633 Jy ! Component: 100 - total flux cleaned = 0.00403843 Jy ! Component: 150 - total flux cleaned = 0.00483248 Jy ! Component: 200 - total flux cleaned = 0.0049027 Jy ! Total flux subtracted in 200 components = 0.0049027 Jy ! Clean residual min=-0.002109 max=0.002308 Jy/beam ! Clean residual mean=0.000010 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.168081 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 231 components and 0.168081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101613Jy sigma=0.000759 ! Fit after self-cal, rms=0.101597Jy sigma=0.000759 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101597Jy sigma=0.000759 ! Fit after self-cal, rms=0.100712Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.282 mas, bmaj=26.24 mas, bpa=-0.08412 degrees ! Estimated noise=923.719 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171408 Jy ! Component: 100 - total flux cleaned = 0.00217994 Jy ! Component: 150 - total flux cleaned = 0.00218052 Jy ! Component: 200 - total flux cleaned = 0.00215204 Jy ! Total flux subtracted in 200 components = 0.00215204 Jy ! Clean residual min=-0.002547 max=0.002420 Jy/beam ! Clean residual mean=0.000016 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.170233 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 250 components and 0.170233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100695Jy sigma=0.000758 ! Fit after self-cal, rms=0.100683Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369709 Jy ! Component: 100 - total flux cleaned = 0.000338835 Jy ! Component: 150 - total flux cleaned = 0.00028024 Jy ! Component: 200 - total flux cleaned = 0.000226584 Jy ! Total flux subtracted in 200 components = 0.000226584 Jy ! Clean residual min=-0.002520 max=0.002392 Jy/beam ! Clean residual mean=0.000018 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.170459 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 259 components and 0.170459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100673Jy sigma=0.000758 ! Fit after self-cal, rms=0.100676Jy sigma=0.000758 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=7.5 mas, bpa=-3.799 degrees ! Estimated noise=706.301 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.901 x 7.5 at -3.799 degrees (North through East) ! Clean map min=-0.0020322 max=0.067116 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.332 mas, bmaj=6.199 mas, bpa=-3.576 degrees ! Estimated noise=1197.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0559148 Jy ! Component: 100 - total flux cleaned = 0.0820101 Jy ! Component: 150 - total flux cleaned = 0.0999737 Jy ! Component: 200 - total flux cleaned = 0.11298 Jy ! Total flux subtracted in 200 components = 0.11298 Jy ! Clean residual min=-0.005494 max=0.008340 Jy/beam ! Clean residual mean=-0.000112 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 0.11298 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 0.11298 Jy ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=7.5 mas, bpa=-3.799 degrees ! Estimated noise=706.301 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, -29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164712 Jy ! Component: 100 - total flux cleaned = 0.0265685 Jy ! Component: 150 - total flux cleaned = 0.0333139 Jy ! Component: 200 - total flux cleaned = 0.0382165 Jy ! Total flux subtracted in 200 components = 0.0382165 Jy ! Clean residual min=-0.002616 max=0.003410 Jy/beam ! Clean residual mean=-0.000041 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.151197 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 120 components and 0.151197 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.282 mas, bmaj=26.24 mas, bpa=-0.08412 degrees ! Estimated noise=923.719 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00637009 Jy ! Component: 100 - total flux cleaned = 0.0102769 Jy ! Component: 150 - total flux cleaned = 0.0128577 Jy ! Component: 200 - total flux cleaned = 0.0146084 Jy ! Total flux subtracted in 200 components = 0.0146084 Jy ! Clean residual min=-0.002383 max=0.002806 Jy/beam ! Clean residual mean=-0.000007 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.165805 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120386 Jy ! Component: 100 - total flux cleaned = 0.00154337 Jy ! Component: 150 - total flux cleaned = 0.00178529 Jy ! Component: 200 - total flux cleaned = 0.00197901 Jy ! Total flux subtracted in 200 components = 0.00197901 Jy ! Clean residual min=-0.002326 max=0.002795 Jy/beam ! Clean residual mean=0.000004 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.167784 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 180 components and 0.167784 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=7.5 mas, bpa=-3.799 degrees ! Estimated noise=706.301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000531783 Jy ! Component: 100 - total flux cleaned = -0.000423607 Jy ! Component: 150 - total flux cleaned = -0.000274053 Jy ! Component: 200 - total flux cleaned = -9.6327e-06 Jy ! Total flux subtracted in 200 components = -9.6327e-06 Jy ! Clean residual min=-0.001982 max=0.002038 Jy/beam ! Clean residual mean=0.000002 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.167774 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 196 components and 0.167774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100716Jy sigma=0.000759 ! Fit after self-cal, rms=0.100604Jy sigma=0.000758 wmodel J1532-3732_S_2014_05_31_pus_map.mod ! Writing 196 model components to file: J1532-3732_S_2014_05_31_pus_map.mod wobs J1532-3732_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J1532-3732_S_2014_05_31_pus_uvs.fits wwins J1532-3732_S_2014_05_31_pus_map.win ! wwins: Wrote 6 windows to J1532-3732_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.63198e-05 Jy ! Component: 100 - total flux cleaned = 2.98156e-06 Jy ! Component: 150 - total flux cleaned = 0.000231452 Jy ! Component: 200 - total flux cleaned = 0.000294534 Jy ! Component: 250 - total flux cleaned = 0.000355107 Jy ! Component: 300 - total flux cleaned = 0.00050291 Jy ! Component: 350 - total flux cleaned = 0.000589052 Jy ! Component: 400 - total flux cleaned = 0.00067338 Jy ! Component: 450 - total flux cleaned = 0.000756611 Jy ! Component: 500 - total flux cleaned = 0.000944079 Jy ! Component: 550 - total flux cleaned = 0.000996463 Jy ! Component: 600 - total flux cleaned = 0.0010472 Jy ! Component: 650 - total flux cleaned = 0.000971978 Jy ! Component: 700 - total flux cleaned = 0.000973015 Jy ! Component: 750 - total flux cleaned = 0.001022 Jy ! Component: 800 - total flux cleaned = 0.00109307 Jy ! Component: 850 - total flux cleaned = 0.00116304 Jy ! Component: 900 - total flux cleaned = 0.00118591 Jy ! Component: 950 - total flux cleaned = 0.00125284 Jy ! Component: 1000 - total flux cleaned = 0.00127417 Jy ! Component: 1050 - total flux cleaned = 0.00129591 Jy ! Component: 1100 - total flux cleaned = 0.00135976 Jy ! Component: 1150 - total flux cleaned = 0.00129641 Jy ! Component: 1200 - total flux cleaned = 0.00142105 Jy ! Component: 1250 - total flux cleaned = 0.00140068 Jy ! Component: 1300 - total flux cleaned = 0.00146144 Jy ! Component: 1350 - total flux cleaned = 0.00148117 Jy ! Component: 1400 - total flux cleaned = 0.00148123 Jy ! Component: 1450 - total flux cleaned = 0.00155885 Jy ! Component: 1500 - total flux cleaned = 0.00157811 Jy ! Component: 1550 - total flux cleaned = 0.00157836 Jy ! Component: 1600 - total flux cleaned = 0.00159731 Jy ! Component: 1650 - total flux cleaned = 0.00161612 Jy ! Component: 1700 - total flux cleaned = 0.00161645 Jy ! Component: 1750 - total flux cleaned = 0.00161692 Jy ! Component: 1800 - total flux cleaned = 0.00161713 Jy ! Component: 1850 - total flux cleaned = 0.00163489 Jy ! Component: 1900 - total flux cleaned = 0.00161766 Jy ! Component: 1950 - total flux cleaned = 0.00161796 Jy ! Component: 2000 - total flux cleaned = 0.00166924 Jy ! Component: 2050 - total flux cleaned = 0.00166904 Jy ! Component: 2100 - total flux cleaned = 0.00170268 Jy ! Component: 2150 - total flux cleaned = 0.0017857 Jy ! Component: 2200 - total flux cleaned = 0.00183496 Jy ! Component: 2250 - total flux cleaned = 0.00186735 Jy ! Component: 2300 - total flux cleaned = 0.00181908 Jy ! Component: 2350 - total flux cleaned = 0.00183511 Jy ! Component: 2400 - total flux cleaned = 0.00188238 Jy ! Component: 2450 - total flux cleaned = 0.00189792 Jy ! Component: 2500 - total flux cleaned = 0.00191341 Jy ! Component: 2550 - total flux cleaned = 0.00197493 Jy ! Component: 2600 - total flux cleaned = 0.00197492 Jy ! Component: 2650 - total flux cleaned = 0.00200532 Jy ! Component: 2700 - total flux cleaned = 0.00206507 Jy ! Component: 2750 - total flux cleaned = 0.00207997 Jy ! Component: 2800 - total flux cleaned = 0.00207991 Jy ! Component: 2850 - total flux cleaned = 0.00212376 Jy ! Component: 2900 - total flux cleaned = 0.00213826 Jy ! Component: 2950 - total flux cleaned = 0.00212382 Jy ! Component: 3000 - total flux cleaned = 0.00216662 Jy ! Component: 3050 - total flux cleaned = 0.00220913 Jy ! Component: 3100 - total flux cleaned = 0.00220933 Jy ! Component: 3150 - total flux cleaned = 0.00223727 Jy ! Component: 3200 - total flux cleaned = 0.00230646 Jy ! Component: 3250 - total flux cleaned = 0.00237514 Jy ! Component: 3300 - total flux cleaned = 0.00240242 Jy ! Component: 3350 - total flux cleaned = 0.00241604 Jy ! Component: 3400 - total flux cleaned = 0.00246978 Jy ! Component: 3450 - total flux cleaned = 0.00248312 Jy ! Component: 3500 - total flux cleaned = 0.00252289 Jy ! Component: 3550 - total flux cleaned = 0.00254922 Jy ! Component: 3600 - total flux cleaned = 0.00258836 Jy ! Component: 3650 - total flux cleaned = 0.00261427 Jy ! Component: 3700 - total flux cleaned = 0.00269152 Jy ! Component: 3750 - total flux cleaned = 0.00274269 Jy ! Component: 3800 - total flux cleaned = 0.00279343 Jy ! Component: 3850 - total flux cleaned = 0.00283137 Jy ! Component: 3900 - total flux cleaned = 0.00286913 Jy ! Component: 3950 - total flux cleaned = 0.00293156 Jy ! Component: 4000 - total flux cleaned = 0.00296874 Jy ! Component: 4050 - total flux cleaned = 0.00303042 Jy ! Total flux subtracted in 4096 components = 0.00306705 Jy ! Clean residual min=-0.000783 max=0.000739 Jy/beam ! Clean residual mean=0.000003 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.170841 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 481 components and 0.170841 Jy ![Exited script file: muppet] wmap "J1532-3732_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.901 x 7.5 at -3.799 degrees (North through East) ! Clean map min=-0.0013178 max=0.067797 Jy/beam ! Writing clean map to FITS file: J1532-3732_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0677966 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000219567 device "J1532-3732_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J1532-3732_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.971584 0.971584 1.94317 3.88634 7.77267 15.5453 31.0907 62.1814 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.901 x 7.5 at -3.799 degrees (North through East) ! Clean map min=-0.0013178 max=0.067797 Jy/beam quit ! Quitting program ! Log file J1532-3732_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:30:41 2016