! Started logfile: J1508-4953_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:30:07 2016 obs J1508-4953_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J1508-4953_S_2014_05_31_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.219126 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1508-4953 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 4812 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1508-4953_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 628 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 622 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 629 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 618 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.663885Jy sigma=0.004754 ! Fit after self-cal, rms=0.620996Jy sigma=0.004456 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.464 mas, bmaj=10.08 mas, bpa=-2.105 degrees ! Estimated noise=2585.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.242993 Jy ! Component: 100 - total flux cleaned = 0.337777 Jy ! Total flux subtracted in 100 components = 0.337777 Jy ! Clean residual min=-0.026117 max=0.050588 Jy/beam ! Clean residual mean=-0.001059 rms=0.011543 Jy/beam ! Combined flux in latest and established models = 0.337777 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.337777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192716Jy sigma=0.001293 ! Fit after self-cal, rms=0.192634Jy sigma=0.001292 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.4 mas, bmaj=13.76 mas, bpa=-1.57 degrees ! Estimated noise=1464.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109346 Jy ! Component: 100 - total flux cleaned = 0.152903 Jy ! Component: 150 - total flux cleaned = 0.170422 Jy ! Component: 200 - total flux cleaned = 0.177566 Jy ! Total flux subtracted in 200 components = 0.177566 Jy ! Clean residual min=-0.009761 max=0.011513 Jy/beam ! Clean residual mean=0.000485 rms=0.003337 Jy/beam ! Combined flux in latest and established models = 0.515343 Jy ! Performing phase self-cal ! Adding 75 model components to the UV plane model. ! The established model now contains 84 components and 0.515343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125085Jy sigma=0.000856 ! Fit after self-cal, rms=0.124986Jy sigma=0.000855 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 1.00* KP 1.04 ! LA 1.19 MK 1.03 NL 1.00* OV 1.00* ! PT 1.02 SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.01 ! LA 1.16 MK 1.03 NL 1.00* OV 1.00* ! PT 1.01 SC 1.11 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 1.00* KP 0.89 ! LA 0.92 MK 1.15 NL 1.00* OV 1.00* ! PT 0.99 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.87 ! LA 0.86 MK 0.90 NL 1.00* OV 1.00* ! PT 1.03 SC 0.88 ! ! ! Fit before self-cal, rms=0.124986Jy sigma=0.000855 ! Fit after self-cal, rms=0.108628Jy sigma=0.000753 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.401 mas, bmaj=13.76 mas, bpa=-1.526 degrees ! Estimated noise=1458.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131009 Jy ! Component: 100 - total flux cleaned = 0.000118467 Jy ! Component: 150 - total flux cleaned = 0.00011809 Jy ! Component: 200 - total flux cleaned = 0.000118339 Jy ! Total flux subtracted in 200 components = 0.000118339 Jy ! Clean residual min=-0.004130 max=0.004735 Jy/beam ! Clean residual mean=-0.000082 rms=0.001300 Jy/beam ! Combined flux in latest and established models = 0.515461 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 87 components and 0.515461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108625Jy sigma=0.000753 ! Fit after self-cal, rms=0.108592Jy sigma=0.000753 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108592Jy sigma=0.000753 ! Fit after self-cal, rms=0.108488Jy sigma=0.000751 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.4 mas, bmaj=13.76 mas, bpa=-1.562 degrees ! Estimated noise=1458.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268913 Jy ! Component: 100 - total flux cleaned = 0.000283887 Jy ! Component: 150 - total flux cleaned = 0.000284314 Jy ! Component: 200 - total flux cleaned = 0.000285286 Jy ! Total flux subtracted in 200 components = 0.000285286 Jy ! Clean residual min=-0.003586 max=0.003923 Jy/beam ! Clean residual mean=-0.000074 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.515747 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 102 components and 0.515747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108484Jy sigma=0.000751 ! Fit after self-cal, rms=0.108487Jy sigma=0.000751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.62561e-05 Jy ! Component: 100 - total flux cleaned = 3.67653e-06 Jy ! Component: 150 - total flux cleaned = 4.97062e-06 Jy ! Component: 200 - total flux cleaned = 4.92309e-06 Jy ! Total flux subtracted in 200 components = 4.92309e-06 Jy ! Clean residual min=-0.003574 max=0.003911 Jy/beam ! Clean residual mean=-0.000073 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.515751 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 104 components and 0.515751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108485Jy sigma=0.000751 ! Fit after self-cal, rms=0.108484Jy sigma=0.000751 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108484Jy sigma=0.000751 ! Fit after self-cal, rms=0.108506Jy sigma=0.000751 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.4 mas, bmaj=13.77 mas, bpa=-1.562 degrees ! Estimated noise=1459.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.5049e-05 Jy ! Component: 100 - total flux cleaned = 9.53835e-05 Jy ! Component: 150 - total flux cleaned = 9.52197e-05 Jy ! Component: 200 - total flux cleaned = 0.000106465 Jy ! Total flux subtracted in 200 components = 0.000106465 Jy ! Clean residual min=-0.003169 max=0.003603 Jy/beam ! Clean residual mean=-0.000059 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.515858 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 107 components and 0.515858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108503Jy sigma=0.000751 ! Fit after self-cal, rms=0.108508Jy sigma=0.000751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.09311e-06 Jy ! Component: 100 - total flux cleaned = 1.96871e-06 Jy ! Component: 150 - total flux cleaned = 1.94098e-06 Jy ! Component: 200 - total flux cleaned = 1.26049e-05 Jy ! Total flux subtracted in 200 components = 1.26049e-05 Jy ! Clean residual min=-0.003157 max=0.003595 Jy/beam ! Clean residual mean=-0.000059 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.515871 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 108 components and 0.515871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108505Jy sigma=0.000751 ! Fit after self-cal, rms=0.108505Jy sigma=0.000751 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108505Jy sigma=0.000751 ! Fit after self-cal, rms=0.108532Jy sigma=0.000751 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.33 mas, bmaj=56.95 mas, bpa=2.328 degrees ! Estimated noise=1816.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.29612e-05 Jy ! Component: 100 - total flux cleaned = -1.32143e-05 Jy ! Component: 150 - total flux cleaned = -1.33131e-05 Jy ! Component: 200 - total flux cleaned = -1.33751e-05 Jy ! Total flux subtracted in 200 components = -1.33751e-05 Jy ! Clean residual min=-0.003098 max=0.003773 Jy/beam ! Clean residual mean=-0.000102 rms=0.001240 Jy/beam ! Combined flux in latest and established models = 0.515857 Jy selfcal ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 110 components and 0.515857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108532Jy sigma=0.000751 ! Fit after self-cal, rms=0.108532Jy sigma=0.000751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.14035e-05 Jy ! Component: 100 - total flux cleaned = -1.13404e-05 Jy ! Component: 150 - total flux cleaned = -1.13666e-05 Jy ! Component: 200 - total flux cleaned = -1.14115e-05 Jy ! Total flux subtracted in 200 components = -1.14115e-05 Jy ! Clean residual min=-0.003095 max=0.003771 Jy/beam ! Clean residual mean=-0.000102 rms=0.001239 Jy/beam ! Combined flux in latest and established models = 0.515846 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 111 components and 0.515846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108531Jy sigma=0.000751 ! Fit after self-cal, rms=0.108531Jy sigma=0.000751 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.4 mas, bmaj=13.77 mas, bpa=-1.566 degrees ! Estimated noise=1459.49 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.4 x 13.77 at -1.566 degrees (North through East) ! Clean map min=-0.0031763 max=0.38304 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.458 mas, bmaj=10.06 mas, bpa=-2.065 degrees ! Estimated noise=2533.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.237821 Jy ! Component: 100 - total flux cleaned = 0.331864 Jy ! Component: 150 - total flux cleaned = 0.393794 Jy ! Component: 200 - total flux cleaned = 0.434584 Jy ! Total flux subtracted in 200 components = 0.434584 Jy ! Clean residual min=-0.011821 max=0.021822 Jy/beam ! Clean residual mean=-0.000575 rms=0.004923 Jy/beam ! Combined flux in latest and established models = 0.434584 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.434584 Jy ! Inverting map and beam ! Estimated beam: bmin=3.4 mas, bmaj=13.77 mas, bpa=-1.566 degrees ! Estimated noise=1459.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0489239 Jy ! Component: 100 - total flux cleaned = 0.0682747 Jy ! Component: 150 - total flux cleaned = 0.0759882 Jy ! Component: 200 - total flux cleaned = 0.0790959 Jy ! Total flux subtracted in 200 components = 0.0790959 Jy ! Clean residual min=-0.003480 max=0.003161 Jy/beam ! Clean residual mean=-0.000105 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.51368 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 67 components and 0.51368 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.33 mas, bmaj=56.95 mas, bpa=2.328 degrees ! Estimated noise=1816.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152562 Jy ! Component: 100 - total flux cleaned = 0.00187392 Jy ! Component: 150 - total flux cleaned = 0.00194784 Jy ! Component: 200 - total flux cleaned = 0.00194826 Jy ! Total flux subtracted in 200 components = 0.00194826 Jy ! Clean residual min=-0.003093 max=0.003765 Jy/beam ! Clean residual mean=-0.000107 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 0.515628 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.76368e-07 Jy ! Component: 100 - total flux cleaned = 7.12616e-07 Jy ! Component: 150 - total flux cleaned = 1.01008e-06 Jy ! Component: 200 - total flux cleaned = 1.29435e-06 Jy ! Total flux subtracted in 200 components = 1.29435e-06 Jy ! Clean residual min=-0.003096 max=0.003767 Jy/beam ! Clean residual mean=-0.000107 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 0.51563 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 87 components and 0.51563 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.4 mas, bmaj=13.77 mas, bpa=-1.566 degrees ! Estimated noise=1459.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.86728e-05 Jy ! Component: 100 - total flux cleaned = 3.51321e-05 Jy ! Component: 150 - total flux cleaned = 4.0335e-05 Jy ! Component: 200 - total flux cleaned = 4.90343e-05 Jy ! Total flux subtracted in 200 components = 4.90343e-05 Jy ! Clean residual min=-0.003121 max=0.003489 Jy/beam ! Clean residual mean=-0.000064 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.515679 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 100 components and 0.515679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108490Jy sigma=0.000751 ! Fit after self-cal, rms=0.108479Jy sigma=0.000751 wmodel J1508-4953_S_2014_05_31_pus_map.mod ! Writing 100 model components to file: J1508-4953_S_2014_05_31_pus_map.mod wobs J1508-4953_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J1508-4953_S_2014_05_31_pus_uvs.fits wwins J1508-4953_S_2014_05_31_pus_map.win ! wwins: Wrote 1 windows to J1508-4953_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183319 Jy ! Component: 100 - total flux cleaned = -2.43441e-05 Jy ! Component: 150 - total flux cleaned = -2.1136e-05 Jy ! Component: 200 - total flux cleaned = -0.000330642 Jy ! Component: 250 - total flux cleaned = -0.000618408 Jy ! Component: 300 - total flux cleaned = -0.000921318 Jy ! Component: 350 - total flux cleaned = -0.00114083 Jy ! Component: 400 - total flux cleaned = -0.00122923 Jy ! Component: 450 - total flux cleaned = -0.00140111 Jy ! Component: 500 - total flux cleaned = -0.00153827 Jy ! Component: 550 - total flux cleaned = -0.00156478 Jy ! Component: 600 - total flux cleaned = -0.0016415 Jy ! Component: 650 - total flux cleaned = -0.00164148 Jy ! Component: 700 - total flux cleaned = -0.00171279 Jy ! Component: 750 - total flux cleaned = -0.00175883 Jy ! Component: 800 - total flux cleaned = -0.00175852 Jy ! Component: 850 - total flux cleaned = -0.00173646 Jy ! Component: 900 - total flux cleaned = -0.00173628 Jy ! Component: 950 - total flux cleaned = -0.00175728 Jy ! Component: 1000 - total flux cleaned = -0.00175718 Jy ! Component: 1050 - total flux cleaned = -0.00173632 Jy ! Component: 1100 - total flux cleaned = -0.00175688 Jy ! Component: 1150 - total flux cleaned = -0.00175675 Jy ! Component: 1200 - total flux cleaned = -0.00175677 Jy ! Component: 1250 - total flux cleaned = -0.00175695 Jy ! Component: 1300 - total flux cleaned = -0.00171795 Jy ! Component: 1350 - total flux cleaned = -0.00167911 Jy ! Component: 1400 - total flux cleaned = -0.00162126 Jy ! Component: 1450 - total flux cleaned = -0.00156385 Jy ! Component: 1500 - total flux cleaned = -0.00154477 Jy ! Component: 1550 - total flux cleaned = -0.00148811 Jy ! Component: 1600 - total flux cleaned = -0.00143185 Jy ! Component: 1650 - total flux cleaned = -0.00141305 Jy ! Component: 1700 - total flux cleaned = -0.00135702 Jy ! Component: 1750 - total flux cleaned = -0.00130097 Jy ! Component: 1800 - total flux cleaned = -0.00126356 Jy ! Component: 1850 - total flux cleaned = -0.00122625 Jy ! Component: 1900 - total flux cleaned = -0.00118879 Jy ! Component: 1950 - total flux cleaned = -0.00113275 Jy ! Component: 2000 - total flux cleaned = -0.00107663 Jy ! Component: 2050 - total flux cleaned = -0.00103946 Jy ! Component: 2100 - total flux cleaned = -0.00102068 Jy ! Component: 2150 - total flux cleaned = -0.000983235 Jy ! Component: 2200 - total flux cleaned = -0.000908012 Jy ! Component: 2250 - total flux cleaned = -0.000889164 Jy ! Component: 2300 - total flux cleaned = -0.000832491 Jy ! Component: 2350 - total flux cleaned = -0.000813661 Jy ! Component: 2400 - total flux cleaned = -0.000813662 Jy ! Component: 2450 - total flux cleaned = -0.000813708 Jy ! Component: 2500 - total flux cleaned = -0.000832846 Jy ! Component: 2550 - total flux cleaned = -0.000832766 Jy ! Component: 2600 - total flux cleaned = -0.00089093 Jy ! Component: 2650 - total flux cleaned = -0.000871577 Jy ! Component: 2700 - total flux cleaned = -0.000910803 Jy ! Component: 2750 - total flux cleaned = -0.000910971 Jy ! Component: 2800 - total flux cleaned = -0.000950858 Jy ! Component: 2850 - total flux cleaned = -0.000970966 Jy ! Component: 2900 - total flux cleaned = -0.00103153 Jy ! Component: 2950 - total flux cleaned = -0.00107226 Jy ! Component: 3000 - total flux cleaned = -0.0011337 Jy ! Component: 3050 - total flux cleaned = -0.00117518 Jy ! Component: 3100 - total flux cleaned = -0.00127999 Jy ! Component: 3150 - total flux cleaned = -0.00132228 Jy ! Component: 3200 - total flux cleaned = -0.00140799 Jy ! Component: 3250 - total flux cleaned = -0.00140816 Jy ! Component: 3300 - total flux cleaned = -0.00140796 Jy ! Component: 3350 - total flux cleaned = -0.00143035 Jy ! Component: 3400 - total flux cleaned = -0.00140761 Jy ! Component: 3450 - total flux cleaned = -0.00143056 Jy ! Component: 3500 - total flux cleaned = -0.00136078 Jy ! Component: 3550 - total flux cleaned = -0.0013134 Jy ! Component: 3600 - total flux cleaned = -0.00131322 Jy ! Component: 3650 - total flux cleaned = -0.00126442 Jy ! Component: 3700 - total flux cleaned = -0.00128897 Jy ! Component: 3750 - total flux cleaned = -0.00128922 Jy ! Component: 3800 - total flux cleaned = -0.00128934 Jy ! Component: 3850 - total flux cleaned = -0.00128933 Jy ! Component: 3900 - total flux cleaned = -0.00128908 Jy ! Component: 3950 - total flux cleaned = -0.00128867 Jy ! Component: 4000 - total flux cleaned = -0.00128855 Jy ! Component: 4050 - total flux cleaned = -0.00128848 Jy ! Total flux subtracted in 4096 components = -0.0013162 Jy ! Clean residual min=-0.001621 max=0.001641 Jy/beam ! Clean residual mean=-0.000014 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.514363 Jy keep ! Adding 221 model components to the UV plane model. ! The established model now contains 321 components and 0.514362 Jy ![Exited script file: muppet] wmap "J1508-4953_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.4 x 13.77 at -1.566 degrees (North through East) ! Clean map min=-0.0039296 max=0.39048 Jy/beam ! Writing clean map to FITS file: J1508-4953_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.390476 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00069893 device "J1508-4953_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J1508-4953_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.536983 0.536983 1.07397 2.14793 4.29587 8.59173 17.1835 34.3669 68.7339 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.39 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.4 x 13.77 at -1.566 degrees (North through East) ! Clean map min=-0.0039296 max=0.39048 Jy/beam quit ! Quitting program ! Log file J1508-4953_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:30:12 2016