! Started logfile: J1311+1417_X_2014_05_31_pus_uvs.log on Sun Nov 27 18:07:34 2016
obs J1311+1417_X_2014_05_31_pus_uva.fits
! Reading UV FITS file: J1311+1417_X_2014_05_31_pus_uva.fits
! AN table 1: 82 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.969377 visibilities/baseline/integration-bin.
! Found source: J1311+1417
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 344 lines of history.
! 
! Reading 42924 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J1311+1417_X_2014_05_31_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.924629Jy  sigma=0.011007
! Fit after  self-cal, rms=0.906459Jy  sigma=0.010799
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7641 mas, bmaj=1.651 mas, bpa=-1.889 degrees
! Estimated noise=627.06 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0697934 Jy
! Component: 100  -  total flux cleaned = 0.0897881 Jy
! Total flux subtracted in 100 components = 0.0897881 Jy
! Clean residual min=-0.012910 max=0.035622 Jy/beam
! Clean residual mean=-0.000067 rms=0.003821 Jy/beam
! Combined flux in latest and established models = 0.0897882 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0897882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.097776Jy  sigma=0.001141
! Fit after  self-cal, rms=0.097690Jy  sigma=0.001140
! Inverting map 
! Added new window around map position (2.4, -2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0313222 Jy
! Component: 100  -  total flux cleaned = 0.0459462 Jy
! Total flux subtracted in 100 components = 0.0459462 Jy
! Clean residual min=-0.010689 max=0.016896 Jy/beam
! Clean residual mean=-0.000056 rms=0.002729 Jy/beam
! Combined flux in latest and established models = 0.135734 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 23 components and 0.135734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085551Jy  sigma=0.000989
! Fit after  self-cal, rms=0.082226Jy  sigma=0.000943
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0177725 Jy
! Component: 100  -  total flux cleaned = 0.0278162 Jy
! Total flux subtracted in 100 components = 0.0278162 Jy
! Clean residual min=-0.007368 max=0.011080 Jy/beam
! Clean residual mean=-0.000043 rms=0.001952 Jy/beam
! Combined flux in latest and established models = 0.163551 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 35 components and 0.163551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077017Jy  sigma=0.000877
! Fit after  self-cal, rms=0.076530Jy  sigma=0.000870
! Inverting map 
! Added new window around map position (1.6, 2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121793 Jy
! Component: 100  -  total flux cleaned = 0.0203491 Jy
! Total flux subtracted in 100 components = 0.0203491 Jy
! Clean residual min=-0.006020 max=0.006731 Jy/beam
! Clean residual mean=-0.000034 rms=0.001510 Jy/beam
! Combined flux in latest and established models = 0.1839 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 47 components and 0.1839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073938Jy  sigma=0.000837
! Fit after  self-cal, rms=0.073775Jy  sigma=0.000835
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9256 mas, bmaj=1.941 mas, bpa=-1.74 degrees
! Estimated noise=289.991 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104406 Jy
! Component: 100  -  total flux cleaned = 0.0178698 Jy
! Component: 150  -  total flux cleaned = 0.0236211 Jy
! Component: 200  -  total flux cleaned = 0.0282917 Jy
! Total flux subtracted in 200 components = 0.0282917 Jy
! Clean residual min=-0.005590 max=0.005356 Jy/beam
! Clean residual mean=-0.000031 rms=0.001341 Jy/beam
! Combined flux in latest and established models = 0.212191 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 71 components and 0.212191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071772Jy  sigma=0.000810
! Fit after  self-cal, rms=0.071692Jy  sigma=0.000808
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.11     HN        1.13     KP        0.90     
!   LA        1.00     MK        0.96     NL        0.96     OV        0.95     
!   PT        0.93     SC        1.04     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.06     HN        1.12     KP        0.85     
!   LA        0.99     MK        1.00     NL        0.98     OV        0.94     
!   PT        0.91     SC        1.09     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.09     HN        1.14     KP        0.80     
!   LA        1.01     MK        1.04     NL        1.01     OV        0.95     
!   PT        0.88     SC        1.09     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.07     HN        1.12     KP        0.76     
!   LA        1.03     MK        0.99     NL        1.03     OV        0.96     
!   PT        0.89     SC        1.05     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.07     HN        1.11     KP        0.74     
!   LA        1.00     MK        1.03     NL        1.02     OV        0.96     
!   PT        0.91     SC        1.10     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.12     HN        1.11     KP        0.74     
!   LA        1.03     MK        1.00     NL        1.05     OV        0.98     
!   PT        0.90     SC        1.08     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.20     HN        1.22     KP        0.78     
!   LA        1.12     MK        1.04     NL        1.07     OV        1.02     
!   PT        0.98     SC        1.10     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.17     HN        1.22     KP        0.73     
!   LA        1.01     MK        1.00     NL        1.04     OV        1.02     
!   PT        0.90     SC        1.19     
! 
! 
! Correcting IF 9.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.11     HN        1.17     KP        0.75     
!   LA        1.03     MK        1.01     NL        1.06     OV        1.03     
!   PT        0.94     SC        1.03     
! 
! 
! Correcting IF 10.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.09     HN        1.17     KP        0.79     
!   LA        1.06     MK        1.05     NL        1.03     OV        0.99     
!   PT        0.92     SC        1.13     
! 
! 
! Correcting IF 11.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.10     HN        1.17     KP        0.83     
!   LA        1.05     MK        1.04     NL        1.10     OV        0.98     
!   PT        0.95     SC        1.08     
! 
! 
! Correcting IF 12.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.10     HN        1.17     KP        0.87     
!   LA        1.04     MK        1.04     NL        1.07     OV        1.04     
!   PT        0.92     SC        1.11     
! 
! 
! Fit before self-cal, rms=0.071692Jy  sigma=0.000808
! Fit after  self-cal, rms=0.071779Jy  sigma=0.000777
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9479 mas, bmaj=1.985 mas, bpa=-2.067 degrees
! Estimated noise=291.556 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122626 Jy
! Component: 100  -  total flux cleaned = 0.00141642 Jy
! Component: 150  -  total flux cleaned = 0.00151444 Jy
! Component: 200  -  total flux cleaned = 0.00168038 Jy
! Total flux subtracted in 200 components = 0.00168038 Jy
! Clean residual min=-0.001635 max=0.002392 Jy/beam
! Clean residual mean=0.000004 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.213872 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 82 components and 0.213872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071666Jy  sigma=0.000776
! Fit after  self-cal, rms=0.071713Jy  sigma=0.000775
! Inverting map 
! Added new window around map position (1.2, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106425 Jy
! Component: 100  -  total flux cleaned = 0.0010562 Jy
! Component: 150  -  total flux cleaned = 0.0011028 Jy
! Component: 200  -  total flux cleaned = 0.0010321 Jy
! Total flux subtracted in 200 components = 0.0010321 Jy
! Clean residual min=-0.001447 max=0.001201 Jy/beam
! Clean residual mean=0.000005 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.214904 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 93 components and 0.214904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071627Jy  sigma=0.000774
! Fit after  self-cal, rms=0.071620Jy  sigma=0.000774
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071620Jy  sigma=0.000774
! Fit after  self-cal, rms=0.071794Jy  sigma=0.000774
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9489 mas, bmaj=1.984 mas, bpa=-2.195 degrees
! Estimated noise=291.82 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000611333 Jy
! Component: 100  -  total flux cleaned = 0.000719975 Jy
! Component: 150  -  total flux cleaned = 0.000660288 Jy
! Component: 200  -  total flux cleaned = 0.000686601 Jy
! Total flux subtracted in 200 components = 0.000686601 Jy
! Clean residual min=-0.001316 max=0.000961 Jy/beam
! Clean residual mean=0.000003 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.215591 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 104 components and 0.21559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071762Jy  sigma=0.000773
! Fit after  self-cal, rms=0.071762Jy  sigma=0.000773
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.36009e-05 Jy
! Component: 100  -  total flux cleaned = 9.38597e-05 Jy
! Component: 150  -  total flux cleaned = 0.000117689 Jy
! Component: 200  -  total flux cleaned = 0.000118045 Jy
! Total flux subtracted in 200 components = 0.000118045 Jy
! Clean residual min=-0.001264 max=0.000919 Jy/beam
! Clean residual mean=0.000003 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.215709 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 108 components and 0.215709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071744Jy  sigma=0.000773
! Fit after  self-cal, rms=0.071743Jy  sigma=0.000773
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071743Jy  sigma=0.000773
! Fit after  self-cal, rms=0.071758Jy  sigma=0.000773
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9489 mas, bmaj=1.984 mas, bpa=-2.259 degrees
! Estimated noise=291.859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000279827 Jy
! Component: 100  -  total flux cleaned = 0.000345065 Jy
! Component: 150  -  total flux cleaned = 0.00036516 Jy
! Component: 200  -  total flux cleaned = 0.000384315 Jy
! Total flux subtracted in 200 components = 0.000384315 Jy
! Clean residual min=-0.001206 max=0.000901 Jy/beam
! Clean residual mean=0.000003 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.216093 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 112 components and 0.216093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071745Jy  sigma=0.000773
! Fit after  self-cal, rms=0.071744Jy  sigma=0.000773
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.50232e-06 Jy
! Component: 100  -  total flux cleaned = 1.93126e-05 Jy
! Component: 150  -  total flux cleaned = 2.68687e-06 Jy
! Component: 200  -  total flux cleaned = 3.01877e-06 Jy
! Total flux subtracted in 200 components = 3.01877e-06 Jy
! Clean residual min=-0.001174 max=0.000877 Jy/beam
! Clean residual mean=0.000003 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.216096 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 117 components and 0.216096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071736Jy  sigma=0.000773
! Fit after  self-cal, rms=0.071735Jy  sigma=0.000773
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071735Jy  sigma=0.000773
! Fit after  self-cal, rms=0.071787Jy  sigma=0.000773
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.167 mas, bmaj=3.02 mas, bpa=-3.729 degrees
! Estimated noise=346.429 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000208452 Jy
! Component: 100  -  total flux cleaned = 0.000273357 Jy
! Component: 150  -  total flux cleaned = 0.000273076 Jy
! Component: 200  -  total flux cleaned = 0.000272808 Jy
! Total flux subtracted in 200 components = 0.000272808 Jy
! Clean residual min=-0.001068 max=0.000905 Jy/beam
! Clean residual mean=0.000005 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.216369 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 128 components and 0.216369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071785Jy  sigma=0.000773
! Fit after  self-cal, rms=0.071784Jy  sigma=0.000773
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.08398e-06 Jy
! Component: 100  -  total flux cleaned = 2.70683e-05 Jy
! Component: 150  -  total flux cleaned = 3.55972e-05 Jy
! Component: 200  -  total flux cleaned = 1.9647e-05 Jy
! Total flux subtracted in 200 components = 1.9647e-05 Jy
! Clean residual min=-0.001058 max=0.000863 Jy/beam
! Clean residual mean=0.000006 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.216388 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 130 components and 0.216388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071784Jy  sigma=0.000773
! Fit after  self-cal, rms=0.071784Jy  sigma=0.000773
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9493 mas, bmaj=1.984 mas, bpa=-2.282 degrees
! Estimated noise=292.021 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9493 x 1.984 at -2.282 degrees (North through East)
! Clean map  min=-0.0010501  max=0.083134 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7808 mas, bmaj=1.685 mas, bpa=-2.363 degrees
! Estimated noise=639.608 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0781736 Jy
! Component: 100  -  total flux cleaned = 0.113393 Jy
! Component: 150  -  total flux cleaned = 0.134781 Jy
! Component: 200  -  total flux cleaned = 0.150467 Jy
! Total flux subtracted in 200 components = 0.150467 Jy
! Clean residual min=-0.005222 max=0.010281 Jy/beam
! Clean residual mean=-0.000038 rms=0.001629 Jy/beam
! Combined flux in latest and established models = 0.150467 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.150467 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9493 mas, bmaj=1.984 mas, bpa=-2.282 degrees
! Estimated noise=292.021 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161606 Jy
! Component: 100  -  total flux cleaned = 0.027754 Jy
! Component: 150  -  total flux cleaned = 0.0363398 Jy
! Component: 200  -  total flux cleaned = 0.042812 Jy
! Total flux subtracted in 200 components = 0.042812 Jy
! Clean residual min=-0.002149 max=0.003969 Jy/beam
! Clean residual mean=-0.000030 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.193279 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 58 components and 0.193279 Jy
! Inverting map 
! Added new window around map position (0.8, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00501752 Jy
! Component: 100  -  total flux cleaned = 0.00892439 Jy
! Component: 150  -  total flux cleaned = 0.0119936 Jy
! Component: 200  -  total flux cleaned = 0.0144264 Jy
! Total flux subtracted in 200 components = 0.0144264 Jy
! Clean residual min=-0.001442 max=0.002036 Jy/beam
! Clean residual mean=-0.000009 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.207706 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 93 components and 0.207706 Jy
! Inverting map 
! Added new window around map position (3.4, -3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00213597 Jy
! Component: 100  -  total flux cleaned = 0.00376809 Jy
! Component: 150  -  total flux cleaned = 0.00508801 Jy
! Component: 200  -  total flux cleaned = 0.0061711 Jy
! Total flux subtracted in 200 components = 0.0061711 Jy
! Clean residual min=-0.001207 max=0.000896 Jy/beam
! Clean residual mean=-0.000001 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.213877 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 111 components and 0.213877 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.167 mas, bmaj=3.02 mas, bpa=-3.729 degrees
! Estimated noise=346.429 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122547 Jy
! Component: 100  -  total flux cleaned = 0.00191994 Jy
! Component: 150  -  total flux cleaned = 0.00211374 Jy
! Component: 200  -  total flux cleaned = 0.00223647 Jy
! Total flux subtracted in 200 components = 0.00223647 Jy
! Clean residual min=-0.001137 max=0.000807 Jy/beam
! Clean residual mean=0.000005 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.216113 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.16141e-05 Jy
! Component: 100  -  total flux cleaned = 0.000135454 Jy
! Component: 150  -  total flux cleaned = 0.000192436 Jy
! Component: 200  -  total flux cleaned = 0.000231176 Jy
! Total flux subtracted in 200 components = 0.000231176 Jy
! Clean residual min=-0.001061 max=0.000801 Jy/beam
! Clean residual mean=0.000006 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.216344 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 146 components and 0.216344 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9493 mas, bmaj=1.984 mas, bpa=-2.282 degrees
! Estimated noise=292.021 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.87736e-05 Jy
! Component: 100  -  total flux cleaned = 0.000173973 Jy
! Component: 150  -  total flux cleaned = 0.000230981 Jy
! Component: 200  -  total flux cleaned = 0.000283373 Jy
! Total flux subtracted in 200 components = 0.000283373 Jy
! Clean residual min=-0.000996 max=0.000796 Jy/beam
! Clean residual mean=0.000003 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.216628 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 160 components and 0.216628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071762Jy  sigma=0.000773
! Fit after  self-cal, rms=0.071747Jy  sigma=0.000773
wmodel J1311+1417_X_2014_05_31_pus_map.mod
! Writing 160 model components to file: J1311+1417_X_2014_05_31_pus_map.mod
wobs J1311+1417_X_2014_05_31_pus_uvs.fits
! Writing UV FITS file: J1311+1417_X_2014_05_31_pus_uvs.fits
wwins J1311+1417_X_2014_05_31_pus_map.win
! wwins: Wrote 6 windows to J1311+1417_X_2014_05_31_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000429498 Jy
! Component: 100  -  total flux cleaned = -0.000708374 Jy
! Component: 150  -  total flux cleaned = -0.000709123 Jy
! Component: 200  -  total flux cleaned = -0.000657858 Jy
! Component: 250  -  total flux cleaned = -0.000682498 Jy
! Component: 300  -  total flux cleaned = -0.000682425 Jy
! Component: 350  -  total flux cleaned = -0.000775619 Jy
! Component: 400  -  total flux cleaned = -0.000820624 Jy
! Component: 450  -  total flux cleaned = -0.000875925 Jy
! Component: 500  -  total flux cleaned = -0.000897567 Jy
! Component: 550  -  total flux cleaned = -0.000950639 Jy
! Component: 600  -  total flux cleaned = -0.000981618 Jy
! Component: 650  -  total flux cleaned = -0.000971429 Jy
! Component: 700  -  total flux cleaned = -0.00099161 Jy
! Component: 750  -  total flux cleaned = -0.0010114 Jy
! Component: 800  -  total flux cleaned = -0.00103086 Jy
! Component: 850  -  total flux cleaned = -0.0010689 Jy
! Component: 900  -  total flux cleaned = -0.00105947 Jy
! Component: 950  -  total flux cleaned = -0.00107786 Jy
! Component: 1000  -  total flux cleaned = -0.00106891 Jy
! Component: 1050  -  total flux cleaned = -0.00107801 Jy
! Component: 1100  -  total flux cleaned = -0.00108681 Jy
! Component: 1150  -  total flux cleaned = -0.00106071 Jy
! Component: 1200  -  total flux cleaned = -0.00105235 Jy
! Component: 1250  -  total flux cleaned = -0.00106055 Jy
! Component: 1300  -  total flux cleaned = -0.00102708 Jy
! Component: 1350  -  total flux cleaned = -0.00101055 Jy
! Component: 1400  -  total flux cleaned = -0.000986078 Jy
! Component: 1450  -  total flux cleaned = -0.000970061 Jy
! Component: 1500  -  total flux cleaned = -0.00093831 Jy
! Component: 1550  -  total flux cleaned = -0.000969858 Jy
! Component: 1600  -  total flux cleaned = -0.000923165 Jy
! Component: 1650  -  total flux cleaned = -0.000915562 Jy
! Component: 1700  -  total flux cleaned = -0.000900168 Jy
! Component: 1750  -  total flux cleaned = -0.000885027 Jy
! Component: 1800  -  total flux cleaned = -0.000840257 Jy
! Component: 1850  -  total flux cleaned = -0.000832966 Jy
! Component: 1900  -  total flux cleaned = -0.000811044 Jy
! Component: 1950  -  total flux cleaned = -0.000803769 Jy
! Component: 2000  -  total flux cleaned = -0.000732103 Jy
! Total flux subtracted in 2048 components = -0.000732285 Jy
! Clean residual min=-0.000385 max=0.000426 Jy/beam
! Clean residual mean=0.000001 rms=0.000132 Jy/beam
! Combined flux in latest and established models = 0.215895 Jy
keep
! Adding 146 model components to the UV plane model.
! The established model now contains 306 components and 0.215895 Jy
![Exited script file: muppet]
wmap "J1311+1417_X_2014_05_31_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9493 x 1.984 at -2.282 degrees (North through East)
! Clean map  min=-0.0007073  max=0.083074 Jy/beam
! Writing clean map to FITS file: J1311+1417_X_2014_05_31_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0830742 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000132051 
device "J1311+1417_X_2014_05_31_pus\_map.eps/VPS"
! Attempting to open device: 'J1311+1417_X_2014_05_31_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.476866 0.476866 0.953733 1.90747 3.81493 7.62986 15.2597 30.5195 61.0389
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.083 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9493 x 1.984 at -2.282 degrees (North through East)
! Clean map  min=-0.0007073  max=0.083074 Jy/beam
quit
! Quitting program
! Log file J1311+1417_X_2014_05_31_pus_uvs.log closed on Sun Nov 27 18:07:37 2016