! Started logfile: J1119+2226_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:24:05 2016 obs J1119+2226_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J1119+2226_S_2014_05_31_pus_uva.fits ! AN table 1: 158 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.626582 visibilities/baseline/integration-bin. ! Found source: J1119+2226 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 17820 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1119+2226_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 457 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 394 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 457 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 457 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.974321Jy sigma=0.011581 ! Fit after self-cal, rms=0.939961Jy sigma=0.011292 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=7.006 mas, bpa=23.04 degrees ! Estimated noise=790.508 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0542696 Jy ! Component: 100 - total flux cleaned = 0.0666772 Jy ! Total flux subtracted in 100 components = 0.0666772 Jy ! Clean residual min=-0.003591 max=0.004737 Jy/beam ! Clean residual mean=-0.000003 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.0666772 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0666772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179583Jy sigma=0.000776 ! Fit after self-cal, rms=0.179568Jy sigma=0.000776 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.12 mas, bmaj=7.852 mas, bpa=18.6 degrees ! Estimated noise=472.239 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00615423 Jy ! Component: 100 - total flux cleaned = 0.00903397 Jy ! Component: 150 - total flux cleaned = 0.0104709 Jy ! Component: 200 - total flux cleaned = 0.0109287 Jy ! Total flux subtracted in 200 components = 0.0109287 Jy ! Clean residual min=-0.002089 max=0.001930 Jy/beam ! Clean residual mean=0.000001 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.0776059 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 0.0776059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179331Jy sigma=0.000770 ! Fit after self-cal, rms=0.179335Jy sigma=0.000770 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 108 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.83 HN 0.98 KP 1.06 ! LA 1.24 MK 1.00* NL 0.94 OV 1.00 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! A total of 111 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.92 HN 1.08 KP 1.05 ! LA 1.11 MK 0.24 NL 1.07 OV 1.01 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 3. ! A total of 108 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.10 HN 1.01 KP 0.93 ! LA 0.92 MK 1.00* NL 1.09 OV 0.97 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 4. ! A total of 108 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.93 HN 0.98 KP 0.88 ! LA 0.87 MK 1.00* NL 1.04 OV 1.05 ! PT 1.00 SC 0.96 ! ! ! Fit before self-cal, rms=0.179335Jy sigma=0.000770 ! Fit after self-cal, rms=0.075899Jy sigma=0.000767 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.222 mas, bmaj=7.788 mas, bpa=18.29 degrees ! Estimated noise=477.909 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000462958 Jy ! Component: 100 - total flux cleaned = 0.000395733 Jy ! Component: 150 - total flux cleaned = 0.000279386 Jy ! Component: 200 - total flux cleaned = 0.000197712 Jy ! Total flux subtracted in 200 components = 0.000197712 Jy ! Clean residual min=-0.001373 max=0.001579 Jy/beam ! Clean residual mean=0.000000 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.0778036 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 31 components and 0.0778036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075884Jy sigma=0.000766 ! Fit after self-cal, rms=0.075803Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075803Jy sigma=0.000766 ! Fit after self-cal, rms=0.074849Jy sigma=0.000765 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.215 mas, bmaj=7.784 mas, bpa=18.24 degrees ! Estimated noise=477.499 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159362 Jy ! Component: 100 - total flux cleaned = 7.14397e-05 Jy ! Component: 150 - total flux cleaned = 1.09176e-05 Jy ! Component: 200 - total flux cleaned = -3.12149e-05 Jy ! Total flux subtracted in 200 components = -3.12149e-05 Jy ! Clean residual min=-0.001285 max=0.001349 Jy/beam ! Clean residual mean=-0.000001 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.0777724 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.0777724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074843Jy sigma=0.000765 ! Fit after self-cal, rms=0.074846Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.04489e-06 Jy ! Component: 100 - total flux cleaned = -7.32048e-05 Jy ! Component: 150 - total flux cleaned = -0.000102563 Jy ! Component: 200 - total flux cleaned = -0.000128664 Jy ! Total flux subtracted in 200 components = -0.000128664 Jy ! Clean residual min=-0.001293 max=0.001342 Jy/beam ! Clean residual mean=-0.000001 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.0776437 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.0776437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074843Jy sigma=0.000765 ! Fit after self-cal, rms=0.074842Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074842Jy sigma=0.000765 ! Fit after self-cal, rms=0.074531Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.209 mas, bmaj=7.785 mas, bpa=18.2 degrees ! Estimated noise=477.072 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.83038e-05 Jy ! Component: 100 - total flux cleaned = -9.1008e-06 Jy ! Component: 150 - total flux cleaned = -3.57323e-05 Jy ! Component: 200 - total flux cleaned = -5.88778e-05 Jy ! Total flux subtracted in 200 components = -5.88778e-05 Jy ! Clean residual min=-0.001278 max=0.001331 Jy/beam ! Clean residual mean=-0.000001 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.0775849 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.0775849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074529Jy sigma=0.000765 ! Fit after self-cal, rms=0.074528Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.59684e-05 Jy ! Component: 100 - total flux cleaned = -1.59233e-05 Jy ! Component: 150 - total flux cleaned = -2.49173e-05 Jy ! Component: 200 - total flux cleaned = -2.89972e-05 Jy ! Total flux subtracted in 200 components = -2.89972e-05 Jy ! Clean residual min=-0.001278 max=0.001332 Jy/beam ! Clean residual mean=-0.000001 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.0775559 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.0775559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074527Jy sigma=0.000765 ! Fit after self-cal, rms=0.074527Jy sigma=0.000765 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074527Jy sigma=0.000765 ! Fit after self-cal, rms=0.074389Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.595 mas, bmaj=9.962 mas, bpa=1.36 degrees ! Estimated noise=553.376 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141837 Jy ! Component: 100 - total flux cleaned = 0.00016842 Jy ! Component: 150 - total flux cleaned = 0.000177679 Jy ! Component: 200 - total flux cleaned = 0.00018574 Jy ! Total flux subtracted in 200 components = 0.00018574 Jy ! Clean residual min=-0.001494 max=0.001488 Jy/beam ! Clean residual mean=-0.000001 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.0777416 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 58 components and 0.0777416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074389Jy sigma=0.000765 ! Fit after self-cal, rms=0.074389Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.69443e-05 Jy ! Component: 100 - total flux cleaned = 3.39811e-05 Jy ! Component: 150 - total flux cleaned = 3.6859e-05 Jy ! Component: 200 - total flux cleaned = 3.68393e-05 Jy ! Total flux subtracted in 200 components = 3.68393e-05 Jy ! Clean residual min=-0.001496 max=0.001484 Jy/beam ! Clean residual mean=-0.000001 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.0777784 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 58 components and 0.0777784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074389Jy sigma=0.000765 ! Fit after self-cal, rms=0.074389Jy sigma=0.000765 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.205 mas, bmaj=7.786 mas, bpa=18.18 degrees ! Estimated noise=476.845 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.205 x 7.786 at 18.18 degrees (North through East) ! Clean map min=-0.0012665 max=0.070194 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.494 mas, bmaj=6.917 mas, bpa=22.55 degrees ! Estimated noise=792.963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0524515 Jy ! Component: 100 - total flux cleaned = 0.0652833 Jy ! Component: 150 - total flux cleaned = 0.0714681 Jy ! Component: 200 - total flux cleaned = 0.0748193 Jy ! Total flux subtracted in 200 components = 0.0748193 Jy ! Clean residual min=-0.002621 max=0.002266 Jy/beam ! Clean residual mean=-0.000001 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.0748193 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0748193 Jy ! Inverting map and beam ! Estimated beam: bmin=4.205 mas, bmaj=7.786 mas, bpa=18.18 degrees ! Estimated noise=476.845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236117 Jy ! Component: 100 - total flux cleaned = 0.00291558 Jy ! Component: 150 - total flux cleaned = 0.00291411 Jy ! Component: 200 - total flux cleaned = 0.00286286 Jy ! Total flux subtracted in 200 components = 0.00286286 Jy ! Clean residual min=-0.001382 max=0.001355 Jy/beam ! Clean residual mean=-0.000001 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0776822 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 27 components and 0.0776822 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.595 mas, bmaj=9.962 mas, bpa=1.36 degrees ! Estimated noise=553.376 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226298 Jy ! Component: 100 - total flux cleaned = 0.000210208 Jy ! Component: 150 - total flux cleaned = 0.000168679 Jy ! Component: 200 - total flux cleaned = 0.000134539 Jy ! Total flux subtracted in 200 components = 0.000134539 Jy ! Clean residual min=-0.001475 max=0.001528 Jy/beam ! Clean residual mean=-0.000001 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.0778167 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.96851e-05 Jy ! Component: 100 - total flux cleaned = -5.52812e-05 Jy ! Component: 150 - total flux cleaned = -7.76412e-05 Jy ! Component: 200 - total flux cleaned = -9.08375e-05 Jy ! Total flux subtracted in 200 components = -9.08375e-05 Jy ! Clean residual min=-0.001488 max=0.001507 Jy/beam ! Clean residual mean=-0.000001 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.0777259 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.0777259 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.205 mas, bmaj=7.786 mas, bpa=18.18 degrees ! Estimated noise=476.845 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000106635 Jy ! Component: 100 - total flux cleaned = -0.000219798 Jy ! Component: 150 - total flux cleaned = -0.000297212 Jy ! Component: 200 - total flux cleaned = -0.000371987 Jy ! Total flux subtracted in 200 components = -0.000371987 Jy ! Clean residual min=-0.001247 max=0.001300 Jy/beam ! Clean residual mean=-0.000001 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.0773539 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.0773539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074390Jy sigma=0.000765 ! Fit after self-cal, rms=0.074392Jy sigma=0.000765 wmodel J1119+2226_S_2014_05_31_pus_map.mod ! Writing 45 model components to file: J1119+2226_S_2014_05_31_pus_map.mod wobs J1119+2226_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J1119+2226_S_2014_05_31_pus_uvs.fits wwins J1119+2226_S_2014_05_31_pus_map.win ! wwins: Wrote 1 windows to J1119+2226_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000399732 Jy ! Component: 100 - total flux cleaned = 0.000423169 Jy ! Component: 150 - total flux cleaned = 0.000423329 Jy ! Component: 200 - total flux cleaned = 0.000423374 Jy ! Component: 250 - total flux cleaned = 0.000382549 Jy ! Component: 300 - total flux cleaned = 0.000343367 Jy ! Component: 350 - total flux cleaned = 0.000305167 Jy ! Component: 400 - total flux cleaned = 0.000323717 Jy ! Component: 450 - total flux cleaned = 0.000287297 Jy ! Component: 500 - total flux cleaned = 0.000269818 Jy ! Component: 550 - total flux cleaned = 0.000269728 Jy ! Component: 600 - total flux cleaned = 0.00020117 Jy ! Component: 650 - total flux cleaned = 0.000201151 Jy ! Component: 700 - total flux cleaned = 0.000233896 Jy ! Component: 750 - total flux cleaned = 0.000217619 Jy ! Component: 800 - total flux cleaned = 0.000265376 Jy ! Component: 850 - total flux cleaned = 0.000281085 Jy ! Component: 900 - total flux cleaned = 0.000343076 Jy ! Component: 950 - total flux cleaned = 0.000419099 Jy ! Component: 1000 - total flux cleaned = 0.00046418 Jy ! Component: 1050 - total flux cleaned = 0.000538017 Jy ! Component: 1100 - total flux cleaned = 0.000552835 Jy ! Component: 1150 - total flux cleaned = 0.000638819 Jy ! Component: 1200 - total flux cleaned = 0.000695232 Jy ! Component: 1250 - total flux cleaned = 0.000779013 Jy ! Component: 1300 - total flux cleaned = 0.000874996 Jy ! Component: 1350 - total flux cleaned = 0.000915513 Jy ! Component: 1400 - total flux cleaned = 0.000955744 Jy ! Component: 1450 - total flux cleaned = 0.000995589 Jy ! Component: 1500 - total flux cleaned = 0.00107399 Jy ! Component: 1550 - total flux cleaned = 0.00111265 Jy ! Component: 1600 - total flux cleaned = 0.00115094 Jy ! Component: 1650 - total flux cleaned = 0.00122653 Jy ! Component: 1700 - total flux cleaned = 0.00123884 Jy ! Component: 1750 - total flux cleaned = 0.00128808 Jy ! Component: 1800 - total flux cleaned = 0.00133663 Jy ! Component: 1850 - total flux cleaned = 0.00139665 Jy ! Component: 1900 - total flux cleaned = 0.00148023 Jy ! Component: 1950 - total flux cleaned = 0.00158653 Jy ! Component: 2000 - total flux cleaned = 0.00165644 Jy ! Component: 2050 - total flux cleaned = 0.00173729 Jy ! Component: 2100 - total flux cleaned = 0.00181746 Jy ! Component: 2150 - total flux cleaned = 0.00185142 Jy ! Component: 2200 - total flux cleaned = 0.00191894 Jy ! Component: 2250 - total flux cleaned = 0.00197447 Jy ! Component: 2300 - total flux cleaned = 0.00199655 Jy ! Component: 2350 - total flux cleaned = 0.00208389 Jy ! Component: 2400 - total flux cleaned = 0.0021164 Jy ! Component: 2450 - total flux cleaned = 0.0021058 Jy ! Component: 2500 - total flux cleaned = 0.0022017 Jy ! Component: 2550 - total flux cleaned = 0.00221234 Jy ! Component: 2600 - total flux cleaned = 0.00226467 Jy ! Component: 2650 - total flux cleaned = 0.00231651 Jy ! Component: 2700 - total flux cleaned = 0.00233701 Jy ! Component: 2750 - total flux cleaned = 0.00238815 Jy ! Component: 2800 - total flux cleaned = 0.00236793 Jy ! Component: 2850 - total flux cleaned = 0.00239817 Jy ! Component: 2900 - total flux cleaned = 0.00243806 Jy ! Component: 2950 - total flux cleaned = 0.0024678 Jy ! Component: 3000 - total flux cleaned = 0.00247766 Jy ! Component: 3050 - total flux cleaned = 0.00248751 Jy ! Component: 3100 - total flux cleaned = 0.00252626 Jy ! Component: 3150 - total flux cleaned = 0.00258397 Jy ! Component: 3200 - total flux cleaned = 0.00260303 Jy ! Component: 3250 - total flux cleaned = 0.00262185 Jy ! Component: 3300 - total flux cleaned = 0.00258414 Jy ! Component: 3350 - total flux cleaned = 0.00264982 Jy ! Component: 3400 - total flux cleaned = 0.00267767 Jy ! Component: 3450 - total flux cleaned = 0.00270549 Jy ! Component: 3500 - total flux cleaned = 0.0027607 Jy ! Component: 3550 - total flux cleaned = 0.00282456 Jy ! Component: 3600 - total flux cleaned = 0.00282453 Jy ! Component: 3650 - total flux cleaned = 0.00285166 Jy ! Component: 3700 - total flux cleaned = 0.00287852 Jy ! Component: 3750 - total flux cleaned = 0.0028696 Jy ! Component: 3800 - total flux cleaned = 0.0029139 Jy ! Component: 3850 - total flux cleaned = 0.00292273 Jy ! Component: 3900 - total flux cleaned = 0.00295773 Jy ! Component: 3950 - total flux cleaned = 0.00298377 Jy ! Component: 4000 - total flux cleaned = 0.00300965 Jy ! Component: 4050 - total flux cleaned = 0.00304396 Jy ! Total flux subtracted in 4096 components = 0.00307816 Jy ! Clean residual min=-0.000545 max=0.000454 Jy/beam ! Clean residual mean=-0.000001 rms=0.000162 Jy/beam ! Combined flux in latest and established models = 0.080432 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 336 components and 0.080432 Jy ![Exited script file: muppet] wmap "J1119+2226_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.205 x 7.786 at 18.18 degrees (North through East) ! Clean map min=-0.00096756 max=0.0701 Jy/beam ! Writing clean map to FITS file: J1119+2226_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0701 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000159598 device "J1119+2226_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J1119+2226_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.683015 0.683015 1.36603 2.73206 5.46412 10.9282 21.8565 43.713 87.4259 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.205 x 7.786 at 18.18 degrees (North through East) ! Clean map min=-0.00096756 max=0.0701 Jy/beam quit ! Quitting program ! Log file J1119+2226_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:24:10 2016